All of lore.kernel.org
 help / color / mirror / Atom feed
* qemu-dm I/O request not ready
@ 2008-02-27 13:49 Dariusz Malec
  0 siblings, 0 replies; 2+ messages in thread
From: Dariusz Malec @ 2008-02-27 13:49 UTC (permalink / raw)
  To: xen-devel

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

I'm using xen to run real linux system. I've configured partition for my
system. When I'm installing Debian Etch everything is fine but when I'm
starting installed system I get a hang.
My xen disk conf is:
disk = [ 'phy:/dev/root/node1,ioemu:hda,w' ]
device_model = '/usr/lib/xen/bin/qemu-dm'

qemu-dm log:

domid: 10
qemu: the number of cpus is 10
Watching /local/domain/10/logdirty/next-active
qemu_map_cache_init nr_buckets = 4000
shared page at pfn 3ffff
buffered io page at pfn 3fffd
Time offset set 0
char device redirected to /dev/pts/1
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
Triggered log-dirty buffer switch
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0

and virtual mashines kernel reports:
hda: set_multmode: status=0x41 { DriveReady Error }
hda: set_multmode: error=0x04 { DriveStatusError }
ide: failed opcode was: 0xef
hda: cache flushes supported
hda: hda1 hda2

and here is hang.

Any suggestions???

- --
Pozdrawiam Dariusz Malec
http://www.kos.wsiz.rzeszow.pl
http://www.kos.wsiz.rzeszow.pl/~dmalec
GG:1720216
JID:dmalec@jabber.kos.wsiz.rzeszow.pl

"Podwładny powinien przed obliczem przełożonego mieć wygląd lichy i
durnowaty, tak by swoim pojmowaniem istoty sprawy, nie peszyć przełożonego."
Ukaz Cara Rosji Piotra I z 9 grudnia 1708 roku

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.7 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFHxWpOjT0NFyejOD8RAooxAJ4iRTe3b0knK/5G7458M2ybErrdygCeNHXs
F4yphDUvsB7V3FiLxHcGf3I=
=CEEk
-----END PGP SIGNATURE-----

^ permalink raw reply	[flat|nested] 2+ messages in thread

* qemu-dm I/O request not ready
@ 2008-02-27 16:15 Dariusz Malec
  0 siblings, 0 replies; 2+ messages in thread
From: Dariusz Malec @ 2008-02-27 16:15 UTC (permalink / raw)
  To: xen-devel

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

I'm using xen to run real linux system. I've configured partition for my
system. When I'm installing Debian Etch everything is fine but when I'm
starting installed system I get a hang.
My xen disk conf is:
disk = [ 'phy:/dev/root/node1,ioemu:hda,w' ]
device_model = '/usr/lib/xen/bin/qemu-dm'

qemu-dm log:

domid: 10
qemu: the number of cpus is 10
Watching /local/domain/10/logdirty/next-active
qemu_map_cache_init nr_buckets = 4000
shared page at pfn 3ffff
buffered io page at pfn 3fffd
Time offset set 0
char device redirected to /dev/pts/1
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
Triggered log-dirty buffer switch
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0

and virtual mashines kernel reports:
hda: set_multmode: status=0x41 { DriveReady Error }
hda: set_multmode: error=0x04 { DriveStatusError }
ide: failed opcode was: 0xef
hda: cache flushes supported
hda: hda1 hda2

and here is hang.

Any suggestions???
- --
Pozdrawiam Dariusz Malec
http://www.kos.wsiz.rzeszow.pl
http://www.kos.wsiz.rzeszow.pl/~dmalec
GG:1720216
JID:dmalec@jabber.kos.wsiz.rzeszow.pl

"Podwładny powinien przed obliczem przełożonego mieć wygląd lichy i
durnowaty, tak by swoim pojmowaniem istoty sprawy, nie peszyć przełożonego."
Ukaz Cara Rosji Piotra I z 9 grudnia 1708 roku

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.7 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFHxYyLjT0NFyejOD8RAs5VAJ4hPNioBHPknWUZSpvRObDl3htYiQCfWP7v
mQmbPKoIbjMnLTzEgYMTgLg=
=Dh38
-----END PGP SIGNATURE-----

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2008-02-27 16:15 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-02-27 13:49 qemu-dm I/O request not ready Dariusz Malec
  -- strict thread matches above, loose matches on Subject: below --
2008-02-27 16:15 Dariusz Malec

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.