From: Carlos Aguiar <carlos.aguiar@indt.org.br>
To: Pierre Ossman <drzeus-list@drzeus.cx>
Cc: Tony Lindgren <tony@atomide.com>, linux-kernel@vger.kernel.org
Subject: [PATCH 15/18] MMC: OMAP: Move failing command abortion to workqueue
Date: Fri, 14 Mar 2008 15:36:51 -0400 [thread overview]
Message-ID: <47DAD3D3.7060601@indt.org.br> (raw)
From: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Abort failed command from workqueue rather than from an interrupt,
allowing longer delays in abortion.
Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
---
drivers/mmc/host/omap.c | 82 ++++++++++++++++++++++++++++-------------------
1 files changed, 49 insertions(+), 33 deletions(-)
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index c26ad3b..43719ae 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -134,8 +134,9 @@ struct mmc_omap_host {
unsigned char bus_mode;
unsigned char hw_bus_mode;
- struct work_struct cmd_abort;
- struct timer_list cmd_timer;
+ struct work_struct cmd_abort_work;
+ unsigned abort:1;
+ struct timer_list cmd_abort_timer;
unsigned int sg_len;
int sg_idx;
@@ -320,7 +321,7 @@ mmc_omap_start_command(struct mmc_omap_host *host, struct mmc_command *cmd)
if (host->data && !(host->data->flags & MMC_DATA_WRITE))
cmdreg |= 1 << 15;
- mod_timer(&host->cmd_timer, jiffies + HZ/2);
+ mod_timer(&host->cmd_abort_timer, jiffies + HZ/2);
OMAP_MMC_WRITE(host, CTO, 200);
OMAP_MMC_WRITE(host, ARGL, cmd->arg & 0xffff);
@@ -381,7 +382,7 @@ mmc_omap_xfer_done(struct mmc_omap_host *host, struct mmc_data *data)
}
static void
-mmc_omap_send_abort(struct mmc_omap_host *host)
+mmc_omap_send_abort(struct mmc_omap_host *host, int maxloops)
{
struct mmc_omap_slot *slot = host->current_slot;
unsigned int restarts, passes, timeout;
@@ -390,7 +391,7 @@ mmc_omap_send_abort(struct mmc_omap_host *host)
/* Sending abort takes 80 clocks. Have some extra and round up */
timeout = (120*1000000 + slot->fclk_freq - 1)/slot->fclk_freq;
restarts = 0;
- while (restarts < 10000) {
+ while (restarts < maxloops) {
OMAP_MMC_WRITE(host, STAT, 0xFFFF);
OMAP_MMC_WRITE(host, CMD, (3 << 12) | (1 << 7));
@@ -412,18 +413,13 @@ out:
static void
mmc_omap_abort_xfer(struct mmc_omap_host *host, struct mmc_data *data)
{
- u16 ie;
-
if (host->dma_in_use)
mmc_omap_release_dma(host, data, 1);
host->data = NULL;
host->sg_len = 0;
- ie = OMAP_MMC_READ(host, IE);
- OMAP_MMC_WRITE(host, IE, 0);
- OMAP_MMC_WRITE(host, IE, ie);
- mmc_omap_send_abort(host);
+ mmc_omap_send_abort(host, 10000);
}
static void
@@ -479,7 +475,7 @@ mmc_omap_cmd_done(struct mmc_omap_host *host, struct mmc_command *cmd)
{
host->cmd = NULL;
- del_timer(&host->cmd_timer);
+ del_timer(&host->cmd_abort_timer);
if (cmd->flags & MMC_RSP_PRESENT) {
if (cmd->flags & MMC_RSP_136) {
@@ -523,38 +519,48 @@ mmc_omap_cmd_done(struct mmc_omap_host *host, struct mmc_command *cmd)
static void mmc_omap_abort_command(struct work_struct *work)
{
struct mmc_omap_host *host = container_of(work, struct mmc_omap_host,
- cmd_abort);
- u16 ie;
-
- ie = OMAP_MMC_READ(host, IE);
- OMAP_MMC_WRITE(host, IE, 0);
-
- if (!host->cmd) {
- OMAP_MMC_WRITE(host, IE, ie);
- return;
- }
+ cmd_abort_work);
+ BUG_ON(!host->cmd);
dev_dbg(mmc_dev(host->mmc), "Aborting stuck command CMD%d\n",
host->cmd->opcode);
- if (host->data && host->dma_in_use)
- mmc_omap_release_dma(host, host->data, 1);
+ if (host->cmd->error == 0)
+ host->cmd->error = -ETIMEDOUT;
- host->data = NULL;
- host->sg_len = 0;
+ if (host->data == NULL) {
+ struct mmc_command *cmd;
+ struct mmc_host *mmc;
+
+ cmd = host->cmd;
+ host->cmd = NULL;
+ mmc_omap_send_abort(host, 10000);
+
+ host->mrq = NULL;
+ mmc = host->mmc;
+ mmc_omap_release_slot(host->current_slot);
+ mmc_request_done(mmc, cmd->mrq);
+ } else
+ mmc_omap_cmd_done(host, host->cmd);
- mmc_omap_send_abort(host);
- host->cmd->error = -ETIMEDOUT;
- mmc_omap_cmd_done(host, host->cmd);
- OMAP_MMC_WRITE(host, IE, ie);
+ host->abort = 0;
+ enable_irq(host->irq);
}
static void
mmc_omap_cmd_timer(unsigned long data)
{
struct mmc_omap_host *host = (struct mmc_omap_host *) data;
+ unsigned long flags;
- schedule_work(&host->cmd_abort);
+ spin_lock_irqsave(&host->slot_lock, flags);
+ if (host->cmd != NULL && !host->abort) {
+ OMAP_MMC_WRITE(host, IE, 0);
+ disable_irq(host->irq);
+ host->abort = 1;
+ schedule_work(&host->cmd_abort_work);
+ }
+ spin_unlock_irqrestore(&host->slot_lock, flags);
}
/* PIO only */
@@ -728,6 +734,15 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
}
}
+ if (cmd_error && host->data) {
+ del_timer(&host->cmd_abort_timer);
+ host->abort = 1;
+ OMAP_MMC_WRITE(host, IE, 0);
+ disable_irq(host->irq);
+ schedule_work(&host->cmd_abort_work);
+ return IRQ_HANDLED;
+ }
+
if (end_command)
mmc_omap_cmd_done(host, host->cmd);
if (host->data != NULL) {
@@ -1338,8 +1353,9 @@ static int __init mmc_omap_probe(struct platform_device *pdev)
goto err_free_mem_region;
}
- INIT_WORK(&host->cmd_abort, mmc_omap_abort_command);
- setup_timer(&host->cmd_timer, mmc_omap_cmd_timer, (unsigned long) host);
+ INIT_WORK(&host->cmd_abort_work, mmc_omap_abort_command);
+ setup_timer(&host->cmd_abort_timer, mmc_omap_cmd_timer,
+ (unsigned long) host);
spin_lock_init(&host->dma_lock);
setup_timer(&host->dma_timer, mmc_omap_dma_timer, (unsigned long) host);
-- 1.5.3.GIT
next reply other threads:[~2008-03-14 19:44 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-14 19:36 Carlos Aguiar [this message]
-- strict thread matches above, loose matches on Subject: below --
2008-03-14 19:35 [PATCH 00/18] MMC: OMAP: Sync MMC OMAP driver with mainline tree Carlos Aguiar
2008-03-24 12:26 ` Pierre Ossman
2008-03-26 20:09 ` [PATCH 15/18] MMC: OMAP: Move failing command abortion to workqueue Carlos Aguiar
2008-01-28 19:08 Carlos Aguiar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47DAD3D3.7060601@indt.org.br \
--to=carlos.aguiar@indt.org.br \
--cc=drzeus-list@drzeus.cx \
--cc=linux-kernel@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.