All of lore.kernel.org
 help / color / mirror / Atom feed
From: Carlos Aguiar <carlos.aguiar@indt.org.br>
To: ext Pierre Ossman <drzeus-list@drzeus.cx>
Cc: Tony Lindgren <tony@atomide.com>, linux-kernel@vger.kernel.org
Subject: [PATCH 15/18] MMC: OMAP: Move failing command abortion to workqueue
Date: Wed, 26 Mar 2008 16:09:48 -0400	[thread overview]
Message-ID: <47EAAD8C.3090101@indt.org.br> (raw)
In-Reply-To: <20080324132631.1e0d2125@mjolnir.drzeus.cx>

From: Jarkko Lavinen <jarkko.lavinen@nokia.com>

Abort failed command from workqueue rather than from an interrupt,
allowing longer delays in abortion.

Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
---
 drivers/mmc/host/omap.c |   82 ++++++++++++++++++++++++++++-------------------
 1 files changed, 49 insertions(+), 33 deletions(-)

diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index f97f390..aaecf4d 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -134,8 +134,9 @@ struct mmc_omap_host {
 	unsigned char		bus_mode;
 	unsigned char		hw_bus_mode;
 
-	struct work_struct	cmd_abort;
-	struct timer_list	cmd_timer;
+	struct work_struct	cmd_abort_work;
+	unsigned		abort:1;
+	struct timer_list	cmd_abort_timer;
 
 	unsigned int		sg_len;
 	int			sg_idx;
@@ -320,7 +321,7 @@ mmc_omap_start_command(struct mmc_omap_host *host, struct mmc_command *cmd)
 	if (host->data && !(host->data->flags & MMC_DATA_WRITE))
 		cmdreg |= 1 << 15;
 
-	mod_timer(&host->cmd_timer, jiffies + HZ/2);
+	mod_timer(&host->cmd_abort_timer, jiffies + HZ/2);
 
 	OMAP_MMC_WRITE(host, CTO, 200);
 	OMAP_MMC_WRITE(host, ARGL, cmd->arg & 0xffff);
@@ -381,7 +382,7 @@ mmc_omap_xfer_done(struct mmc_omap_host *host, struct mmc_data *data)
 }
 
 static void
-mmc_omap_send_abort(struct mmc_omap_host *host)
+mmc_omap_send_abort(struct mmc_omap_host *host, int maxloops)
 {
 	struct mmc_omap_slot *slot = host->current_slot;
 	unsigned int restarts, passes, timeout;
@@ -390,7 +391,7 @@ mmc_omap_send_abort(struct mmc_omap_host *host)
 	/* Sending abort takes 80 clocks. Have some extra and round up */
 	timeout = (120*1000000 + slot->fclk_freq - 1)/slot->fclk_freq;
 	restarts = 0;
-	while (restarts < 10000) {
+	while (restarts < maxloops) {
 		OMAP_MMC_WRITE(host, STAT, 0xFFFF);
 		OMAP_MMC_WRITE(host, CMD, (3 << 12) | (1 << 7));
 
@@ -412,18 +413,13 @@ out:
 static void
 mmc_omap_abort_xfer(struct mmc_omap_host *host, struct mmc_data *data)
 {
-	u16 ie;
-
 	if (host->dma_in_use)
 		mmc_omap_release_dma(host, data, 1);
 
 	host->data = NULL;
 	host->sg_len = 0;
 
-	ie = OMAP_MMC_READ(host, IE);
-	OMAP_MMC_WRITE(host, IE, 0);
-	OMAP_MMC_WRITE(host, IE, ie);
-	mmc_omap_send_abort(host);
+	mmc_omap_send_abort(host, 10000);
 }
 
 static void
@@ -479,7 +475,7 @@ mmc_omap_cmd_done(struct mmc_omap_host *host, struct mmc_command *cmd)
 {
 	host->cmd = NULL;
 
-	del_timer(&host->cmd_timer);
+	del_timer(&host->cmd_abort_timer);
 
 	if (cmd->flags & MMC_RSP_PRESENT) {
 		if (cmd->flags & MMC_RSP_136) {
@@ -523,38 +519,48 @@ mmc_omap_cmd_done(struct mmc_omap_host *host, struct mmc_command *cmd)
 static void mmc_omap_abort_command(struct work_struct *work)
 {
 	struct mmc_omap_host *host = container_of(work, struct mmc_omap_host,
-						  cmd_abort);
-	u16 ie;
-
-	ie = OMAP_MMC_READ(host, IE);
-	OMAP_MMC_WRITE(host, IE, 0);
-
-	if (!host->cmd) {
-		OMAP_MMC_WRITE(host, IE, ie);
-		return;
-	}
+						  cmd_abort_work);
+	BUG_ON(!host->cmd);
 
 	dev_dbg(mmc_dev(host->mmc), "Aborting stuck command CMD%d\n",
 		host->cmd->opcode);
 
-	if (host->data && host->dma_in_use)
-		mmc_omap_release_dma(host, host->data, 1);
+	if (host->cmd->error == 0)
+		host->cmd->error = -ETIMEDOUT;
 
-	host->data = NULL;
-	host->sg_len = 0;
+	if (host->data == NULL) {
+		struct mmc_command *cmd;
+		struct mmc_host    *mmc;
+
+		cmd = host->cmd;
+		host->cmd = NULL;
+		mmc_omap_send_abort(host, 10000);
+
+		host->mrq = NULL;
+		mmc = host->mmc;
+		mmc_omap_release_slot(host->current_slot);
+		mmc_request_done(mmc, cmd->mrq);
+	} else
+		mmc_omap_cmd_done(host, host->cmd);
 
-	mmc_omap_send_abort(host);
-	host->cmd->error = -ETIMEDOUT;
-	mmc_omap_cmd_done(host, host->cmd);
-	OMAP_MMC_WRITE(host, IE, ie);
+	host->abort = 0;
+	enable_irq(host->irq);
 }
 
 static void
 mmc_omap_cmd_timer(unsigned long data)
 {
 	struct mmc_omap_host *host = (struct mmc_omap_host *) data;
+	unsigned long flags;
 
-	schedule_work(&host->cmd_abort);
+	spin_lock_irqsave(&host->slot_lock, flags);
+	if (host->cmd != NULL && !host->abort) {
+		OMAP_MMC_WRITE(host, IE, 0);
+		disable_irq(host->irq);
+		host->abort = 1;
+		schedule_work(&host->cmd_abort_work);
+	}
+	spin_unlock_irqrestore(&host->slot_lock, flags);
 }
 
 /* PIO only */
@@ -728,6 +734,15 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
 		}
 	}
 
+	if (cmd_error && host->data) {
+		del_timer(&host->cmd_abort_timer);
+		host->abort = 1;
+		OMAP_MMC_WRITE(host, IE, 0);
+		disable_irq(host->irq);
+		schedule_work(&host->cmd_abort_work);
+		return IRQ_HANDLED;
+	}
+
 	if (end_command)
 		mmc_omap_cmd_done(host, host->cmd);
 	if (host->data != NULL) {
@@ -1316,8 +1331,9 @@ static int __init mmc_omap_probe(struct platform_device *pdev)
 		goto err_free_mem_region;
 	}
 
-	INIT_WORK(&host->cmd_abort, mmc_omap_abort_command);
-	setup_timer(&host->cmd_timer, mmc_omap_cmd_timer, (unsigned long) host);
+	INIT_WORK(&host->cmd_abort_work, mmc_omap_abort_command);
+	setup_timer(&host->cmd_abort_timer, mmc_omap_cmd_timer,
+		    (unsigned long) host);
 
 	spin_lock_init(&host->dma_lock);
 	setup_timer(&host->dma_timer, mmc_omap_dma_timer, (unsigned long) host);
-- 1.5.3.GIT


  parent reply	other threads:[~2008-03-26 20:17 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-03-14 19:35 [PATCH 00/18] MMC: OMAP: Sync MMC OMAP driver with mainline tree Carlos Aguiar
2008-03-24 12:26 ` Pierre Ossman
2008-03-26 20:08   ` Carlos Aguiar
2008-03-30 16:10     ` Pierre Ossman
2008-03-26 20:08   ` [PATCH 01/18] MMC: OMAP: Remove some opcodes from host driver Carlos Aguiar
2008-03-26 20:08   ` [PATCH 02/18] MMC: OMAP: Remove extra divisor increase Carlos Aguiar
2008-03-26 20:08   ` [PATCH 03/18] MMC: OMAP: Fix the BYTEBLOCK capability removal Carlos Aguiar
2008-03-26 20:08   ` [PATCH 04/18] MMC: OMAP: Remove cover switch handling to allow adding multislot support Carlos Aguiar
2008-03-26 20:08   ` [PATCH 05/18] MMC: OMAP: Introduce new multislot structure and change driver to use it Carlos Aguiar
2008-03-26 20:09   ` [PATCH 06/18] MMC: OMAP: Add back cover switch support Carlos Aguiar
2008-03-26 20:09   ` [PATCH 07/18] MMC: OMAP: New release dma and abort xfer functions Carlos Aguiar
2008-03-26 20:09   ` [PATCH 08/18] MMC: OMAP: Fix timeout calculation for MMC multislot support Carlos Aguiar
2008-03-26 20:09   ` [PATCH 09/18] MMC: OMAP: Power functions modified to " Carlos Aguiar
2008-03-26 20:09   ` [PATCH 10/18] MMC: OMAP: General cleanup for " Carlos Aguiar
2008-03-26 20:09   ` [PATCH 11/18] MMC: OMAP: Abort stuck commands Carlos Aguiar
2008-03-26 20:09   ` [PATCH 12/18] MMC: OMAP: Using setup_timer instead of init_timer Carlos Aguiar
2008-03-26 20:09   ` [PATCH 13/18] MMC: OMAP: Check the get_cover_state function pointer if not set Carlos Aguiar
2008-03-26 20:09   ` [PATCH 14/18] MMC: OMAP: Use tasklet instead of workqueue for cover switch notification Carlos Aguiar
2008-03-26 20:09   ` Carlos Aguiar [this message]
2008-03-26 20:09   ` [PATCH 16/18] MMC: OMAP: Lazy clock shutdown Carlos Aguiar
2008-03-26 20:09   ` [PATCH 17/18] MMC: OMAP: Start new commands from work queue instead of irq Carlos Aguiar
2008-03-26 20:10   ` [PATCH 18/18] MMC: OMAP: Do not busy wait for end of command for ever Carlos Aguiar
  -- strict thread matches above, loose matches on Subject: below --
2008-03-14 19:36 [PATCH 15/18] MMC: OMAP: Move failing command abortion to workqueue Carlos Aguiar
2008-01-28 19:08 Carlos Aguiar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=47EAAD8C.3090101@indt.org.br \
    --to=carlos.aguiar@indt.org.br \
    --cc=drzeus-list@drzeus.cx \
    --cc=linux-kernel@vger.kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.