From: Hans de Goede <j.w.r.degoede@hhs.nl>
To: "Zhang, Rui" <rui.zhang@intel.com>
Cc: Jean Delvare <khali@linux-fr.org>,
linux-acpi <linux-acpi@vger.kernel.org>,
lm-sensors <lm-sensors@lm-sensors.org>,
Matthew Garrett <mjg59@srcf.ucam.org>,
Thomas Renninger <trenn@suse.de>,
"Thomas, Sujith" <sujith.thomas@intel.com>,
"Mark M. Hoffman" <mhoffman@lightlink.com>,
Henrique de Moraes Holschuh <hmh@hmh.eng.br>,
Len Brown <lenb@kernel.org>, Richard Hughes <hughsient@gmail.com>
Subject: Re: [PATCH 1/2] thermal: add hwmon sys I/F for thermal device
Date: Tue, 18 Mar 2008 10:25:27 +0100 [thread overview]
Message-ID: <47DF8A87.2010506@hhs.nl> (raw)
In-Reply-To: <1205805569.3171.23.camel@acpi-hp-zz.sh.intel.com>
Zhang, Rui wrote:
> On Mon, 2008-03-17 at 20:37 +0800, Jean Delvare wrote:
>> The
>> labelling issue could be solved by adding temp*_label files, but this
>> still prevents the user from overriding a label.
> why user needs to override the label?
Well allowing the user to specify user visible names is always good. But that
can still be done with temp*_label files. Last time I checked (when I wrote the
_label sysfs atrr support code) it would only check for and use a foo#_label
file if no label was specified in sensors.conf.
This would of course require the temp# numbering to be consistent over reboots
and kernel versions.
Regards,
Hans
WARNING: multiple messages have this Message-ID (diff)
From: Hans de Goede <j.w.r.degoede@hhs.nl>
To: "Zhang, Rui" <rui.zhang@intel.com>
Cc: Jean Delvare <khali@linux-fr.org>,
linux-acpi <linux-acpi@vger.kernel.org>,
lm-sensors <lm-sensors@lm-sensors.org>,
Matthew Garrett <mjg59@srcf.ucam.org>,
Thomas Renninger <trenn@suse.de>,
"Thomas, Sujith" <sujith.thomas@intel.com>,
"Mark M. Hoffman" <mhoffman@lightlink.com>,
Henrique de Moraes Holschuh <hmh@hmh.eng.br>,
Len Brown <lenb@kernel.org>, Richard Hughes <hughsient@gmail.com>
Subject: Re: [lm-sensors] [PATCH 1/2] thermal: add hwmon sys I/F for thermal
Date: Tue, 18 Mar 2008 09:25:27 +0000 [thread overview]
Message-ID: <47DF8A87.2010506@hhs.nl> (raw)
In-Reply-To: <1205805569.3171.23.camel@acpi-hp-zz.sh.intel.com>
Zhang, Rui wrote:
> On Mon, 2008-03-17 at 20:37 +0800, Jean Delvare wrote:
>> The
>> labelling issue could be solved by adding temp*_label files, but this
>> still prevents the user from overriding a label.
> why user needs to override the label?
Well allowing the user to specify user visible names is always good. But that
can still be done with temp*_label files. Last time I checked (when I wrote the
_label sysfs atrr support code) it would only check for and use a foo#_label
file if no label was specified in sensors.conf.
This would of course require the temp# numbering to be consistent over reboots
and kernel versions.
Regards,
Hans
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
next prev parent reply other threads:[~2008-03-18 9:25 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-25 21:31 [PATCH 1/2] thermal: add hwmon sys I/F for thermal device Zhang, Rui
2008-02-25 21:31 ` [lm-sensors] [PATCH 1/2] thermal: add hwmon sys I/F for thermal Zhang, Rui
2008-02-26 8:39 ` [PATCH 1/2] thermal: add hwmon sys I/F for thermal device Hans de Goede
2008-02-26 8:39 ` [lm-sensors] [PATCH 1/2] thermal: add hwmon sys I/F for thermal Hans de Goede
2008-02-26 21:40 ` [PATCH 1/2] thermal: add hwmon sys I/F for thermal device Zhang, Rui
2008-02-26 21:40 ` [lm-sensors] [PATCH 1/2] thermal: add hwmon sys I/F for thermal Zhang, Rui
2008-02-27 8:32 ` [PATCH 1/2] thermal: add hwmon sys I/F for thermal device Hans de Goede
2008-02-27 8:32 ` [lm-sensors] [PATCH 1/2] thermal: add hwmon sys I/F for thermal Hans de Goede
2008-03-17 12:37 ` [PATCH 1/2] thermal: add hwmon sys I/F for thermal device Jean Delvare
2008-03-17 12:37 ` [lm-sensors] [PATCH 1/2] thermal: add hwmon sys I/F for thermal Jean Delvare
2008-03-17 12:55 ` [PATCH 1/2] thermal: add hwmon sys I/F for thermal device Hans de Goede
2008-03-17 12:55 ` [lm-sensors] [PATCH 1/2] thermal: add hwmon sys I/F for thermal Hans de Goede
2008-03-17 13:48 ` [PATCH 1/2] thermal: add hwmon sys I/F for thermal device Jean Delvare
2008-03-17 13:48 ` [lm-sensors] [PATCH 1/2] thermal: add hwmon sys I/F for thermal Jean Delvare
2008-03-18 3:45 ` [PATCH 1/2] thermal: add hwmon sys I/F for thermal device Zhang, Rui
2008-03-18 3:45 ` [lm-sensors] [PATCH 1/2] thermal: add hwmon sys I/F for thermal Zhang, Rui
2008-03-18 10:06 ` [PATCH 1/2] thermal: add hwmon sys I/F for thermal device Jean Delvare
2008-03-18 10:06 ` [lm-sensors] [PATCH 1/2] thermal: add hwmon sys I/F for thermal Jean Delvare
2008-03-20 14:58 ` [PATCH 1/2] thermal: add hwmon sys I/F for thermal device Henrique de Moraes Holschuh
2008-03-20 14:58 ` [lm-sensors] [PATCH 1/2] thermal: add hwmon sys I/F for thermal Henrique de Moraes Holschuh
2008-03-18 5:12 ` [PATCH 1/2] thermal: add hwmon sys I/F for thermal device Len Brown
2008-03-18 5:12 ` [lm-sensors] [PATCH 1/2] thermal: add hwmon sys I/F for thermal Len Brown
2008-03-18 9:44 ` [PATCH 1/2] thermal: add hwmon sys I/F for thermal device Jean Delvare
2008-03-18 9:44 ` [lm-sensors] [PATCH 1/2] thermal: add hwmon sys I/F for thermal Jean Delvare
2008-03-18 3:11 ` [PATCH 1/2] thermal: add hwmon sys I/F for thermal device Zhang, Rui
2008-03-18 3:11 ` [lm-sensors] [PATCH 1/2] thermal: add hwmon sys I/F for thermal Zhang, Rui
2008-03-18 1:59 ` [PATCH 1/2] thermal: add hwmon sys I/F for thermal device Zhang, Rui
2008-03-18 1:59 ` [lm-sensors] [PATCH 1/2] thermal: add hwmon sys I/F for thermal Zhang, Rui
2008-03-18 9:25 ` Hans de Goede [this message]
2008-03-18 9:25 ` Hans de Goede
2008-03-18 9:40 ` [PATCH 1/2] thermal: add hwmon sys I/F for thermal device Jean Delvare
2008-03-18 9:40 ` [lm-sensors] [PATCH 1/2] thermal: add hwmon sys I/F for thermal Jean Delvare
-- strict thread matches above, loose matches on Subject: below --
2008-02-27 0:37 [PATCH 1/2] thermal: add hwmon sys I/F for thermal device Zhang, Rui
2008-02-27 0:37 ` [lm-sensors] [PATCH 1/2] thermal: add hwmon sys I/F for thermal Zhang, Rui
2008-03-12 4:29 ` [PATCH 1/2] thermal: add hwmon sys I/F for thermal device Len Brown
2008-03-12 4:29 ` [lm-sensors] [PATCH 1/2] thermal: add hwmon sys I/F for thermal Len Brown
2008-03-13 5:09 ` [PATCH 1/2] thermal: add hwmon sys I/F for thermal device Len Brown
2008-03-13 5:09 ` [lm-sensors] [PATCH 1/2] thermal: add hwmon sys I/F for thermal Len Brown
2008-03-13 8:46 ` [PATCH 1/2] thermal: add hwmon sys I/F for thermal device Zhang, Rui
2008-03-13 8:46 ` [lm-sensors] [PATCH 1/2] thermal: add hwmon sys I/F for thermal Zhang, Rui
2008-03-18 4:59 ` [PATCH 1/2] thermal: add hwmon sys I/F for thermal device Len Brown
2008-03-18 4:59 ` [lm-sensors] [PATCH 1/2] thermal: add hwmon sys I/F for thermal Len Brown
2008-03-13 10:59 ` [PATCH 1/2] thermal: add hwmon sys I/F for thermal device Thomas Renninger
2008-03-13 10:59 ` [lm-sensors] [PATCH 1/2] thermal: add hwmon sys I/F for thermal Thomas Renninger
2008-03-13 23:09 ` [PATCH 1/2] thermal: add hwmon sys I/F for thermal device Henrique de Moraes Holschuh
2008-03-13 23:09 ` [lm-sensors] [PATCH 1/2] thermal: add hwmon sys I/F for thermal Henrique de Moraes Holschuh
2008-03-14 9:03 ` [PATCH 1/2] thermal: add hwmon sys I/F for thermal device Thomas Renninger
2008-03-14 9:03 ` [lm-sensors] [PATCH 1/2] thermal: add hwmon sys I/F for thermal Thomas Renninger
2008-03-15 4:25 ` [lm-sensors] [PATCH 1/2] thermal: add hwmon sys I/F for thermal device Henrique de Moraes Holschuh
2008-03-15 4:25 ` [lm-sensors] [PATCH 1/2] thermal: add hwmon sys I/F for thermal Henrique de Moraes Holschuh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47DF8A87.2010506@hhs.nl \
--to=j.w.r.degoede@hhs.nl \
--cc=hmh@hmh.eng.br \
--cc=hughsient@gmail.com \
--cc=khali@linux-fr.org \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=lm-sensors@lm-sensors.org \
--cc=mhoffman@lightlink.com \
--cc=mjg59@srcf.ucam.org \
--cc=rui.zhang@intel.com \
--cc=sujith.thomas@intel.com \
--cc=trenn@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.