Re: simple MPC5200B system

["André Schwarz" <andre.schwarz@matrix-vision.de>]

David Gibson schrieb:
> On Thu, Mar 20, 2008 at 08:48:42AM +0100, Andr=E9 Schwarz wrote:
>> David Gibson schrieb:
>>> On Thu, Mar 20, 2008 at 01:14:45AM +0100, Wolfgang Denk wrote:
>>>> In message <47DF821B.6090600@matrix-vision.de> you wrote:
>>>>> I've pulled the latest git and built a mpc5200_simple system with a=
=20
>>>>> minimal dts.
>>>>> There's not a single char put on the console ....
>>>> You did build your device tree with "-b 0", didn't you?
>>> Ugh.. I really need to fix dtc to pick the default boot cpu value mor=
e
>>> sensibly, don't I.
>> I didn't specify "-b 0". This shouldn't be neccessary on a single proc=
essor=20
>> system ! After all it's an option ... "0" should be default.
>=20
> Should, yes.  But dtc's pretty new, and a sensible default for -b is
> one thing that isn't there.
>=20

ok - but this has not caused my (solved) problem. dtc is working fine=20
for me :-)

MATRIX VISION GmbH, Talstra=DFe 16, DE-71570 Oppenweiler  - Registergeric=
ht: Amtsgericht Stuttgart, HRB 271090
Gesch=E4ftsf=FChrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner