Re: [Bugme-new] [Bug 10322] New: e1000 is not auto-negotiating to 1GB full duplex speed even there is 1GB speed availble

Re: [Bugme-new] [Bug 10322] New: e1000 is not auto-negotiating to 1GB full duplex speed even there is 1GB speed availble

[Andrew Morton]

(switched to email.  Please respond via emailed reply-to-all, not via the
bugzilla web interface).


On Tue, 25 Mar 2008 07:29:56 -0700 (PDT)
bugme-daemon@bugzilla.kernel.org wrote:

> http://bugzilla.kernel.org/show_bug.cgi?id=10322
> 
>            Summary: e1000 is not auto-negotiating to 1GB full duplex speed
>                     even there is 1GB speed availble
>            Product: Drivers
>            Version: 2.5
>      KernelVersion: 2.6.23
>           Platform: All
>         OS/Version: Linux
>               Tree: Mainline
>             Status: NEW
>           Severity: normal
>           Priority: P1
>          Component: Network
>         AssignedTo: jgarzik@pobox.com
>         ReportedBy: lqs_xting@sohu.com
>                 CC: lqs_xting@sohu.com
> 
> 
> Latest working kernel version: 2.6.23.9
> Earliest failing kernel version: 2.6.21

err, according to this, we had the bug in 2.6.21 and then fixed it in
2.6.23.9, so this is a report of an already fixed bug ;)

Can you please clarify the version numbers here?

> Distribution:
> Hardware Environment: e1000 with 82571 chip
> Software Environment: CentOS 4.5
> Problem Description:
> We have a machine with the e1000(82571) driver which could not detect the
> correct link mode with a switch supports 1000 Mbps/s. I just find that the
> ethtool can't support 10 Mbps/s Half and 1000 Mbps/s Full mode. Therefore, the
> e1000 code should be fixed by add all modes at the 216 lines in
> e1000_ethtool.c. It is as follow:
> 
> hw->autoneg_advertised |= ecmd->advertising |
>                          ADVERTISED_TP |
>                          ADVERTISED_Autoneg;
> 
> 
> Steps to reproduce:
> 1. Add a entry ' ETHTOOL_OPTS="autoneg on" ' in the
> /etc/sysconfig/network-scripts/ifcfg-eth0;
> 2. Run '/etc/init.d/network restart';
> 3. Run 'ethtool eth0', it displays the speed is 100 Mbps/s. But the real link
> mode should be 1000 Mbps/s

Re: [Bugme-new] [Bug 10322] New: e1000 is not auto-negotiating to 1GB full duplex speed even there is 1GB speed availble

[Kok, Auke]

Andrew Morton wrote:
>> Hardware Environment: e1000 with 82571 chip
>> Software Environment: CentOS 4.5
>> Problem Description:
>> We have a machine with the e1000(82571) driver which could not detect the
>> correct link mode with a switch supports 1000 Mbps/s. I just find that the
>> ethtool can't support 10 Mbps/s Half and 1000 Mbps/s Full mode. Therefore, the
>> e1000 code should be fixed by add all modes at the 216 lines in
>> e1000_ethtool.c. It is as follow:
>>
>> hw->autoneg_advertised |= ecmd->advertising |
>>                          ADVERTISED_TP |
>>                          ADVERTISED_Autoneg;
>>
>>
>> Steps to reproduce:
>> 1. Add a entry ' ETHTOOL_OPTS="autoneg on" ' in the
>> /etc/sysconfig/network-scripts/ifcfg-eth0;
>> 2. Run '/etc/init.d/network restart';
>> 3. Run 'ethtool eth0', it displays the speed is 100 Mbps/s. But the real link
>> mode should be 1000 Mbps/s

a bit moot because 82571 support is moving to e1000e and thus I will (probably)
not fix this bug. all 82571 support will be removed from e1000 from 2.6.26 onwards.

Please re-test against e1000e from 2.6.25-rc5 - if the bug is still in that driver
then we need to look at it again. Either that or reproduce against an 8254x adapter?

Auke