Re: [PATCH] [IXBGE]: Compilation fix for ixgbe_main.c.

["Kok, Auke" <auke-jan.h.kok@intel.com>]

Denis V. Lunev wrote:
> Under CONFIG_DCA the compilation is broken since the commit
> bd0362dde080cef377d99fa5beb5c25308c29c73 (ixgbe: Add optional
> DCA infrastructure).
> 
> IXGBE_SUCCESS is not defined anywhere, replace it with 0.
> 
> Signed-off-by: Denis V. Lunev <den@openvz.org>


Ack and thanks, but should go to Jeff Garzik instead.

Jeff, please apply.


Auke


> ---
>  drivers/net/ixgbe/ixgbe_main.c |    6 +++---
>  1 files changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
> index 7ad2993..cb371a8 100644
> --- a/drivers/net/ixgbe/ixgbe_main.c
> +++ b/drivers/net/ixgbe/ixgbe_main.c
> @@ -367,7 +367,7 @@ static int __ixgbe_notify_dca(struct device *dev, void *data)
>  		/* Always use CB2 mode, difference is masked
>  		 * in the CB driver. */
>  		IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 2);
> -		if (dca_add_requester(dev) == IXGBE_SUCCESS) {
> +		if (dca_add_requester(dev) == 0) {
>  			ixgbe_setup_dca(adapter);
>  			break;
>  		}
> @@ -381,7 +381,7 @@ static int __ixgbe_notify_dca(struct device *dev, void *data)
>  		break;
>  	}
>  
> -	return IXGBE_SUCCESS;
> +	return 0;
>  }
>  
>  #endif /* CONFIG_DCA */
> @@ -3605,7 +3605,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
>  		goto err_register;
>  
>  #ifdef CONFIG_DCA
> -	if (dca_add_requester(&pdev->dev) == IXGBE_SUCCESS) {
> +	if (dca_add_requester(&pdev->dev) == 0) {
>  		adapter->flags |= IXGBE_FLAG_DCA_ENABLED;
>  		/* always use CB2 mode, difference is masked
>  		 * in the CB driver */