* [Xenomai-help] CAN Probleme
@ 2008-04-08 15:39 Urs Eichholzer
2008-04-08 17:19 ` Wolfgang Grandegger
0 siblings, 1 reply; 2+ messages in thread
From: Urs Eichholzer @ 2008-04-08 15:39 UTC (permalink / raw)
To: xenomai
Hello
We are just start to use the setup...
We try to read parameters from a device true the CAN. From some parameters we
get proper replay and with other parameters we get the following message:
rtcan0: btr0=0x05 btr1=0x4f
rtcan0: btr0=0x0a btr1=0x6f
rtcan_mscan_start_xmit: TX buffer not empty
Thanks for any help
Urs
----------------------------------------------------------------
This message was sent using Samart Web Mail 2005.
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [Xenomai-help] CAN Probleme
2008-04-08 15:39 [Xenomai-help] CAN Probleme Urs Eichholzer
@ 2008-04-08 17:19 ` Wolfgang Grandegger
0 siblings, 0 replies; 2+ messages in thread
From: Wolfgang Grandegger @ 2008-04-08 17:19 UTC (permalink / raw)
To: Urs Eichholzer; +Cc: xenomai
Hi Urs,
Urs Eichholzer wrote:
> Hello
>
> We are just start to use the setup...
> We try to read parameters from a device true the CAN. From some parameters we
> get proper replay and with other parameters we get the following message:
> rtcan0: btr0=0x05 btr1=0x4f
> rtcan0: btr0=0x0a btr1=0x6f
> rtcan_mscan_start_xmit: TX buffer not empty
Hm, this message is pretty fatal. What version of Linux and Xenomai do
you use? What type of parameters do you read when the error message
shows up. Can you reproduce the problem with a little example program?
Thanks,
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2008-04-08 17:19 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-04-08 15:39 [Xenomai-help] CAN Probleme Urs Eichholzer
2008-04-08 17:19 ` Wolfgang Grandegger
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.