From: Jochen Friedrich <jochen@scram.de>
To: Kumar Gala <galak@kernel.crashing.org>
Cc: linuxppc-dev list <linuxppc-dev@ozlabs.org>,
Scott Wood <scottwood@freescale.com>
Subject: [PATCH2/2] [POWERPC] CPM1: implement GPIO LIB API on CPM1 Freescale SoC.
Date: Fri, 18 Apr 2008 19:10:30 +0200 [thread overview]
Message-ID: <4808D606.5070309@scram.de> (raw)
This patch implement GPIO LIB support for the CPM1 GPIOs.
Signed-off-by: Jochen Friedrich <jochen@scram.de>
---
arch/powerpc/platforms/8xx/Kconfig | 10 ++
arch/powerpc/sysdev/cpm1.c | 261 +++++++++++++++++++++++++++++++++++-
2 files changed, 266 insertions(+), 5 deletions(-)
diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig
index 6fc849e..3488bb7 100644
--- a/arch/powerpc/platforms/8xx/Kconfig
+++ b/arch/powerpc/platforms/8xx/Kconfig
@@ -105,6 +105,16 @@ config 8xx_COPYBACK
If in doubt, say Y here.
+config 8xx_GPIO
+ bool "GPIO API Support"
+ select GENERIC_GPIO
+ select HAVE_GPIO_LIB
+ help
+ Saying Y here will cause the ports on an MPC8xx processor to be used
+ with the GPIO API. If you say N here, the kernel needs less memory.
+
+ If in doubt, say Y here.
+
config 8xx_CPU6
bool "CPU6 Silicon Errata (860 Pre Rev. C)"
help
diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c
index 58292a0..01ae3ae 100644
--- a/arch/powerpc/sysdev/cpm1.c
+++ b/arch/powerpc/sysdev/cpm1.c
@@ -30,6 +30,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/module.h>
+#include <linux/spinlock.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/8xx_immap.h>
@@ -42,6 +43,10 @@
#include <asm/fs_pd.h>
+#ifdef CONFIG_8xx_GPIO
+#include <linux/of_gpio.h>
+#endif
+
#define CPM_MAP_SIZE (0x4000)
cpm8xx_t __iomem *cpmp; /* Pointer to comm processor space */
@@ -290,20 +295,24 @@ struct cpm_ioport16 {
__be16 res[3];
};
-struct cpm_ioport32 {
- __be32 dir, par, sor;
+struct cpm_ioport32b {
+ __be32 dir, par, odr, dat;
+};
+
+struct cpm_ioport32e {
+ __be32 dir, par, sor, odr, dat;
};
static void cpm1_set_pin32(int port, int pin, int flags)
{
- struct cpm_ioport32 __iomem *iop;
+ struct cpm_ioport32e __iomem *iop;
pin = 1 << (31 - pin);
if (port == CPM_PORTB)
- iop = (struct cpm_ioport32 __iomem *)
+ iop = (struct cpm_ioport32e __iomem *)
&mpc8xx_immr->im_cpm.cp_pbdir;
else
- iop = (struct cpm_ioport32 __iomem *)
+ iop = (struct cpm_ioport32e __iomem *)
&mpc8xx_immr->im_cpm.cp_pedir;
if (flags & CPM_PIN_OUTPUT)
@@ -498,3 +507,245 @@ int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode)
return 0;
}
+
+/*
+ * GPIO LIB API implementation
+ */
+#ifdef CONFIG_8xx_GPIO
+
+struct cpm1_gpio16_chip {
+ struct of_mm_gpio_chip mm_gc;
+ spinlock_t lock;
+
+ /* shadowed data register to clear/set bits safely */
+ u16 cpdata;
+};
+
+static inline struct cpm1_gpio16_chip *
+to_cpm1_gpio16_chip(struct of_mm_gpio_chip *mm_gc)
+{
+ return container_of(mm_gc, struct cpm1_gpio16_chip, mm_gc);
+}
+
+static void cpm1_gpio16_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+ struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc);
+ struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+
+ cpm1_gc->cpdata = in_be16(&iop->dat);
+}
+
+static int cpm1_gpio16_get(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+ u16 pin_mask;
+
+ pin_mask = 1 << (15 - gpio);
+
+ return !!(in_be16(&iop->dat) & pin_mask);
+}
+
+static void cpm1_gpio16_set(struct gpio_chip *gc, unsigned int gpio, int value)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc);
+ struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+ unsigned long flags;
+ u16 pin_mask = 1 << (15 - gpio);
+
+ spin_lock_irqsave(&cpm1_gc->lock, flags);
+
+ if (value)
+ cpm1_gc->cpdata |= pin_mask;
+ else
+ cpm1_gc->cpdata &= ~pin_mask;
+
+ out_be16(&iop->dat, cpm1_gc->cpdata);
+
+ spin_unlock_irqrestore(&cpm1_gc->lock, flags);
+}
+
+static int cpm1_gpio16_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+ u16 pin_mask;
+
+ pin_mask = 1 << (15 - gpio);
+
+ setbits16(&iop->dir, pin_mask);
+
+ cpm1_gpio16_set(gc, gpio, val);
+
+ return 0;
+}
+
+static int cpm1_gpio16_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+ u16 pin_mask;
+
+ pin_mask = 1 << (15 - gpio);
+
+ clrbits16(&iop->dir, pin_mask);
+
+ return 0;
+}
+
+int cpm1_gpiochip_add16(struct device_node *np)
+{
+ struct cpm1_gpio16_chip *cpm1_gc;
+ struct of_mm_gpio_chip *mm_gc;
+ struct of_gpio_chip *of_gc;
+ struct gpio_chip *gc;
+
+ cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL);
+ if (!cpm1_gc)
+ return -ENOMEM;
+
+ spin_lock_init(&cpm1_gc->lock);
+
+ mm_gc = &cpm1_gc->mm_gc;
+ of_gc = &mm_gc->of_gc;
+ gc = &of_gc->gc;
+
+ mm_gc->save_regs = cpm1_gpio16_save_regs;
+ of_gc->gpio_cells = 1;
+ gc->ngpio = 16;
+ gc->direction_input = cpm1_gpio16_dir_in;
+ gc->direction_output = cpm1_gpio16_dir_out;
+ gc->get = cpm1_gpio16_get;
+ gc->set = cpm1_gpio16_set;
+
+ return of_mm_gpiochip_add(np, mm_gc);
+}
+
+struct cpm1_gpio32_chip {
+ struct of_mm_gpio_chip mm_gc;
+ spinlock_t lock;
+
+ /* shadowed data register to clear/set bits safely */
+ u32 cpdata;
+};
+
+static inline struct cpm1_gpio32_chip *
+to_cpm1_gpio32_chip(struct of_mm_gpio_chip *mm_gc)
+{
+ return container_of(mm_gc, struct cpm1_gpio32_chip, mm_gc);
+}
+
+static void cpm1_gpio32_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+ struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc);
+ struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+
+ cpm1_gc->cpdata = in_be32(&iop->dat);
+}
+
+static int cpm1_gpio32_get(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+ u32 pin_mask;
+
+ pin_mask = 1 << (31 - gpio);
+
+ return !!(in_be32(&iop->dat) & pin_mask);
+}
+
+static void cpm1_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc);
+ struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+ unsigned long flags;
+ u32 pin_mask = 1 << (31 - gpio);
+
+ spin_lock_irqsave(&cpm1_gc->lock, flags);
+
+ if (value)
+ cpm1_gc->cpdata |= pin_mask;
+ else
+ cpm1_gc->cpdata &= ~pin_mask;
+
+ out_be32(&iop->dat, cpm1_gc->cpdata);
+
+ spin_unlock_irqrestore(&cpm1_gc->lock, flags);
+}
+
+static int cpm1_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+ u32 pin_mask;
+
+ pin_mask = 1 << (31 - gpio);
+
+ setbits32(&iop->dir, pin_mask);
+
+ cpm1_gpio32_set(gc, gpio, val);
+
+ return 0;
+}
+
+static int cpm1_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+ u32 pin_mask;
+
+ pin_mask = 1 << (31 - gpio);
+
+ clrbits32(&iop->dir, pin_mask);
+
+ return 0;
+}
+
+int cpm1_gpiochip_add32(struct device_node *np)
+{
+ struct cpm1_gpio32_chip *cpm1_gc;
+ struct of_mm_gpio_chip *mm_gc;
+ struct of_gpio_chip *of_gc;
+ struct gpio_chip *gc;
+
+ cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL);
+ if (!cpm1_gc)
+ return -ENOMEM;
+
+ spin_lock_init(&cpm1_gc->lock);
+
+ mm_gc = &cpm1_gc->mm_gc;
+ of_gc = &mm_gc->of_gc;
+ gc = &of_gc->gc;
+
+ mm_gc->save_regs = cpm1_gpio32_save_regs;
+ of_gc->gpio_cells = 1;
+ gc->ngpio = 32;
+ gc->direction_input = cpm1_gpio32_dir_in;
+ gc->direction_output = cpm1_gpio32_dir_out;
+ gc->get = cpm1_gpio32_get;
+ gc->set = cpm1_gpio32_set;
+
+ return of_mm_gpiochip_add(np, mm_gc);
+}
+
+static int cpm_init_par_io(void)
+{
+ struct device_node *np;
+
+ for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank16")
+ cpm1_gpiochip_add16(np);
+
+ for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank32b")
+ cpm1_gpiochip_add32(np);
+
+ /* Port E uses CPM2 layout */
+ for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank32e")
+ cpm2_gpiochip_add32(np);
+ return 0;
+}
+arch_initcall(cpm_init_par_io);
+
+#endif /* CONFIG_8xx_GPIO */
--
1.5.5
next reply other threads:[~2008-04-18 17:10 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-18 17:10 Jochen Friedrich [this message]
2008-04-21 14:30 ` [PATCH2/2] [POWERPC] CPM1: implement GPIO LIB API on CPM1 Freescale SoC Grant Likely
2008-07-01 15:40 ` Jochen Friedrich
2008-07-01 16:36 ` Grant Likely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4808D606.5070309@scram.de \
--to=jochen@scram.de \
--cc=galak@kernel.crashing.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=scottwood@freescale.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.