All of lore.kernel.org
 help / color / mirror / Atom feed
* [U-Boot-Users] [PATCH 0/2] NE2000: Fix regresssion introduced by e710185aae90 on non AX88796
@ 2008-04-21 17:22 Jean-Christophe PLAGNIOL-VILLARD
  2008-04-21 17:22 ` [U-Boot-Users] [PATCH 1/2] qemu-mips: add CFI support and coding style cleanup Jean-Christophe PLAGNIOL-VILLARD
  2008-04-21 19:24 ` [U-Boot-Users] [PATCH 0/2] NE2000: Fix regresssion introduced by e710185aae90 on non AX88796 Wolfgang Denk
  0 siblings, 2 replies; 24+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2008-04-21 17:22 UTC (permalink / raw)
  To: u-boot

Move non-inlied functions into specific drivers file
Set get_prom as weak

Coding Style Cleanup

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Vlad Lungu <vlad@comsys.ro>

diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index d5e413b..4131aad 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -42,7 +42,10 @@ COBJS-y += lan91c96.o
 COBJS-y += macb.o
 COBJS-y += mcffec.o
 COBJS-y += natsemi.o
-COBJS-$(CONFIG_DRIVER_NE2000) += ne2000.o
+ifeq ($(CONFIG_DRIVER_NE2000),y)
+COBJS-y += ne2000.o
+COBJS-$(CONFIG_DRIVER_AX88796L) += ax88796.o
+endif
 COBJS-y += netarm_eth.o
 COBJS-y += netconsole.o
 COBJS-y += ns7520_eth.o
diff --git a/drivers/net/ax88796.c b/drivers/net/ax88796.c
new file mode 100644
index 0000000..39cd101
--- /dev/null
+++ b/drivers/net/ax88796.c
@@ -0,0 +1,156 @@
+/*
+ * (c) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <common.h>
+#include "ax88796.h"
+
+/*
+ * Set 1 bit data
+ */
+static void ax88796_bitset(u32 bit)
+{
+	/* DATA1 */
+	if( bit )
+		EEDI_HIGH;
+	else
+		EEDI_LOW;
+
+	EECLK_LOW;
+	udelay(1000);
+	EECLK_HIGH;
+	udelay(1000);
+	EEDI_LOW;
+}
+
+/*
+ * Get 1 bit data
+ */
+static u8 ax88796_bitget(void)
+{
+	u8 bit;
+
+	EECLK_LOW;
+	udelay(1000);
+	/* DATA */
+	bit = EEDO;
+	EECLK_HIGH;
+	udelay(1000);
+
+	return bit;
+}
+
+/*
+ * Send COMMAND to EEPROM
+ */
+static void ax88796_eep_cmd(u8 cmd)
+{
+	ax88796_bitset(BIT_DUMMY);
+	switch(cmd){
+		case MAC_EEP_READ:
+			ax88796_bitset(1);
+			ax88796_bitset(1);
+			ax88796_bitset(0);
+			break;
+
+		case MAC_EEP_WRITE:
+			ax88796_bitset(1);
+			ax88796_bitset(0);
+			ax88796_bitset(1);
+			break;
+
+		case MAC_EEP_ERACE:
+			ax88796_bitset(1);
+			ax88796_bitset(1);
+			ax88796_bitset(1);
+			break;
+
+		case MAC_EEP_EWEN:
+			ax88796_bitset(1);
+			ax88796_bitset(0);
+			ax88796_bitset(0);
+			break;
+
+		case MAC_EEP_EWDS:
+			ax88796_bitset(1);
+			ax88796_bitset(0);
+			ax88796_bitset(0);
+			break;
+		default:
+			break;
+	}
+}
+
+static void ax88796_eep_setaddr(u16 addr)
+{
+	int i ;
+
+	for( i = 7 ; i >= 0 ; i-- )
+		ax88796_bitset(addr & (1 << i));
+}
+
+/*
+ * Get data from EEPROM
+ */
+static u16 ax88796_eep_getdata(void)
+{
+	ushort data = 0;
+	int i;
+
+	ax88796_bitget();	/* DUMMY */
+	for( i = 0 ; i < 16 ; i++ ){
+		data <<= 1;
+		data |= ax88796_bitget();
+	}
+	return data;
+}
+
+static void ax88796_mac_read(u8 *buff)
+{
+	int i ;
+	u16 data;
+	u16 addr = 0;
+
+	for( i = 0 ; i < 3; i++ )
+	{
+		EECS_HIGH;
+		EEDI_LOW;
+		udelay(1000);
+		/* READ COMMAND */
+		ax88796_eep_cmd(MAC_EEP_READ);
+		/* ADDRESS */
+		ax88796_eep_setaddr(addr++);
+		/* GET DATA */
+		data = ax88796_eep_getdata();
+		*buff++ = (uchar)(data & 0xff);
+		*buff++ = (uchar)((data >> 8) & 0xff);
+		EECLK_LOW;
+		EEDI_LOW;
+		EECS_LOW;
+	}
+}
+
+int get_prom(u8* mac_addr)
+{
+	u8 prom[32];
+	int i;
+
+	ax88796_mac_read(prom);
+	for (i = 0; i < 6; i++){
+		mac_addr[i] = prom[i];
+	}
+	return 1;
+}
diff --git a/drivers/net/ax88796.h b/drivers/net/ax88796.h
index 069ae80..aa342cb 100644
--- a/drivers/net/ax88796.h
+++ b/drivers/net/ax88796.h
@@ -79,139 +79,5 @@
 #endif
 
 
-/*
- * Set 1 bit data
- */
-static void ax88796_bitset(u32 bit)
-{
-	/* DATA1 */
-	if( bit )
-		EEDI_HIGH;
-	else
-		EEDI_LOW;
-
-	EECLK_LOW;
-	udelay(1000);
-	EECLK_HIGH;
-	udelay(1000);
-	EEDI_LOW;
-}
-
-/*
- * Get 1 bit data
- */
-static u8 ax88796_bitget(void)
-{
-	u8 bit;
-
-	EECLK_LOW;
-	udelay(1000);
-	/* DATA */
-	bit = EEDO;
-	EECLK_HIGH;
-	udelay(1000);
-
-	return bit;
-}
-
-/*
- * Send COMMAND to EEPROM
- */
-static void ax88796_eep_cmd(u8 cmd)
-{
-	ax88796_bitset(BIT_DUMMY);
-	switch(cmd){
-		case MAC_EEP_READ:
-			ax88796_bitset(1);
-			ax88796_bitset(1);
-			ax88796_bitset(0);
-			break;
-
-		case MAC_EEP_WRITE:
-			ax88796_bitset(1);
-			ax88796_bitset(0);
-			ax88796_bitset(1);
-			break;
-
-		case MAC_EEP_ERACE:
-			ax88796_bitset(1);
-			ax88796_bitset(1);
-			ax88796_bitset(1);
-			break;
-
-		case MAC_EEP_EWEN:
-			ax88796_bitset(1);
-			ax88796_bitset(0);
-			ax88796_bitset(0);
-			break;
-
-		case MAC_EEP_EWDS:
-			ax88796_bitset(1);
-			ax88796_bitset(0);
-			ax88796_bitset(0);
-			break;
-		default:
-			break;
-	}
-}
-
-static void ax88796_eep_setaddr(u16 addr)
-{
-	int i ;
-	for( i = 7 ; i >= 0 ; i-- )
-		ax88796_bitset(addr & (1 << i));
-}
-
-/*
- * Get data from EEPROM
- */
-static u16 ax88796_eep_getdata(void)
-{
-	ushort data = 0;
-	int i;
-
-	ax88796_bitget();	/* DUMMY */
-	for( i = 0 ; i < 16 ; i++ ){
-		data <<= 1;
-		data |= ax88796_bitget();
-	}
-	return data;
-}
-
-static void ax88796_mac_read(u8 *buff)
-{
-	int i ;
-	u16 data, addr = 0;
-
-	for( i = 0 ; i < 3; i++ )
-	{
-		EECS_HIGH;
-		EEDI_LOW;
-		udelay(1000);
-		/* READ COMMAND */
-		ax88796_eep_cmd(MAC_EEP_READ);
-		/* ADDRESS */
-		ax88796_eep_setaddr(addr++);
-		/* GET DATA */
-		data = ax88796_eep_getdata();
-		*buff++ = (uchar)(data & 0xff);
-		*buff++ = (uchar)((data >> 8) & 0xff);
-		EECLK_LOW;
-		EEDI_LOW;
-		EECS_LOW;
-	}
-}
-
-int get_prom(u8* mac_addr)
-{
-	u8 prom[32];
-	int i;
-
-	ax88796_mac_read(prom);
-	for (i = 0; i < 6; i++){
-		mac_addr[i] = prom[i];
-	}
-	return 1;
-}
 
 #endif /* __DRIVERS_AX88796L_H__ */
diff --git a/drivers/net/ne2000.c b/drivers/net/ne2000.c
index 99baeea..3f32693 100644
--- a/drivers/net/ne2000.c
+++ b/drivers/net/ne2000.c
@@ -1,5 +1,5 @@
 /*
-Ported to U-Boot  by Christian Pellegrin <chri@ascensit.com>
+Ported to U-Boot by Christian Pellegrin <chri@ascensit.com>
 
 Based on sources from the Linux kernel (pcnet_cs.c, 8390.h) and
 eCOS(if_dp83902a.c, if_dp83902a.h). Both of these 2 wonderful world
@@ -23,7 +23,7 @@ Software Foundation; either version 2 or (at your option) any later version.
 
 eCos is distributed in the hope that it will be useful, but WITHOUT ANY
 WARRANTY; without even the implied warranty of MERCHANTABILITY or
-FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
 for more details.
 
 You should have received a copy of the GNU General Public License along
@@ -57,13 +57,13 @@ and are covered by the appropriate copyright disclaimers included herein.
 ==========================================================================
 #####DESCRIPTIONBEGIN####
 
-Author(s):    gthomas
-Contributors: gthomas, jskov, rsandifo
-Date:	      2001-06-13
+Author(s):	gthomas
+Contributors:	gthomas, jskov, rsandifo
+Date:		2001-06-13
 Purpose:
 Description:
 
-FIXME:	      Will fail if pinged with large packets (1520 bytes)
+FIXME:		Will fail if pinged with large packets (1520 bytes)
 Add promisc config
 Add SNMP
 
@@ -77,24 +77,26 @@ Add SNMP
 #include <net.h>
 #include <malloc.h>
 
-#define mdelay(n)       udelay((n)*1000)
+#define mdelay(n)	udelay((n)*1000)
 /* forward definition of function used for the uboot interface */
 void uboot_push_packet_len(int len);
 void uboot_push_tx_done(int key, int val);
 
 /*
-  ------------------------------------------------------------------------
-  Debugging details
-
-  Set to perms of:
-  0 disables all debug output
-  1 for process debug output
-  2 for added data IO output: get_reg, put_reg
-  4 for packet allocation/free output
-  8 for only startup status, so we can tell we're installed OK
-*/
-/*#define DEBUG 0xf*/
+ * Debugging details
+ *
+ * Set to perms of:
+ * 0 disables all debug output
+ * 1 for process debug output
+ * 2 for added data IO output: get_reg, put_reg
+ * 4 for packet allocation/free output
+ * 8 for only startup status, so we can tell we're installed OK
+ */
+#if 0
+#define DEBUG 0xf
+#else
 #define DEBUG 0
+#endif
 
 #if DEBUG & 1
 #define DEBUG_FUNCTION() do { printf("%s\n", __FUNCTION__); } while (0)
@@ -124,31 +126,35 @@ dp83902a_init(void)
 {
 	dp83902a_priv_data_t *dp = &nic;
 	u8* base;
+#if defined(NE2000_BASIC_INIT)
+	int i;
+#endif
 
 	DEBUG_FUNCTION();
 
 	base = dp->base;
-	if (!base) return false;  /* No device found */
+	if (!base)
+		return false;	/* No device found */
 
 	DEBUG_LINE();
 
 #if defined(NE2000_BASIC_INIT)
 	/* AX88796L doesn't need */
 	/* Prepare ESA */
-	DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE1);  /* Select page 1 */
+	DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE1);	/* Select page 1 */
 	/* Use the address from the serial EEPROM */
 	for (i = 0; i < 6; i++)
 		DP_IN(base, DP_P1_PAR0+i, dp->esa[i]);
-	DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE0);  /* Select page 0 */
+	DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE0);	/* Select page 0 */
 
 	printf("NE2000 - %s ESA: %02x:%02x:%02x:%02x:%02x:%02x\n",
-	       "eeprom",
-	       dp->esa[0],
-	       dp->esa[1],
-	       dp->esa[2],
-	       dp->esa[3],
-	       dp->esa[4],
-	       dp->esa[5] );
+		"eeprom",
+		dp->esa[0],
+		dp->esa[1],
+		dp->esa[2],
+		dp->esa[3],
+		dp->esa[4],
+		dp->esa[5] );
 
 #endif	/* NE2000_BASIC_INIT */
 	return true;
@@ -162,7 +168,7 @@ dp83902a_stop(void)
 
 	DEBUG_FUNCTION();
 
-	DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_STOP);  /* Brutal */
+	DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_STOP);	/* Brutal */
 	DP_OUT(base, DP_ISR, 0xFF);		/* Clear any pending interrupts */
 	DP_OUT(base, DP_IMR, 0x00);		/* Disable all interrupts */
 
@@ -170,11 +176,11 @@ dp83902a_stop(void)
 }
 
 /*
-  This function is called to "start up" the interface.  It may be called
-  multiple times, even when the hardware is already running.  It will be
-  called whenever something "hardware oriented" changes and should leave
-  the hardware ready to send/receive packets.
-*/
+ * This function is called to "start up" the interface. It may be called
+ * multiple times, even when the hardware is already running. It will be
+ * called whenever something "hardware oriented" changes and should leave
+ * the hardware ready to send/receive packets.
+ */
 static void
 dp83902a_start(u8 * enaddr)
 {
@@ -196,16 +202,16 @@ dp83902a_start(u8 * enaddr)
 	dp->tx_started = false;
 	dp->running = true;
 	DP_OUT(base, DP_PSTART, dp->rx_buf_start); /* Receive ring start page */
-	DP_OUT(base, DP_BNDRY, dp->rx_buf_end-1); /* Receive ring boundary */
+	DP_OUT(base, DP_BNDRY, dp->rx_buf_end - 1); /* Receive ring boundary */
 	DP_OUT(base, DP_PSTOP, dp->rx_buf_end);	/* Receive ring end page */
-	dp->rx_next = dp->rx_buf_start-1;
+	dp->rx_next = dp->rx_buf_start - 1;
 	dp->running = true;
 	DP_OUT(base, DP_ISR, 0xFF);		/* Clear any pending interrupts */
 	DP_OUT(base, DP_IMR, DP_IMR_All);	/* Enable all interrupts */
-	DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE1 | DP_CR_STOP);  /* Select page 1 */
-	DP_OUT(base, DP_P1_CURP, dp->rx_buf_start);   /* Current page - next free page for Rx */
+	DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE1 | DP_CR_STOP);	/* Select page 1 */
+	DP_OUT(base, DP_P1_CURP, dp->rx_buf_start);	/* Current page - next free page for Rx */
 	dp->running = true;
-	for (i = 0;  i < ETHER_ADDR_LEN;  i++) {
+	for (i = 0; i < ETHER_ADDR_LEN; i++) {
 		/* FIXME */
 		/*((vu_short*)( base + ((DP_P1_PAR0 + i) * 2) +
 		 * 0x1400)) = enaddr[i];*/
@@ -214,15 +220,15 @@ dp83902a_start(u8 * enaddr)
 	/* Enable and start device */
 	DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START);
 	DP_OUT(base, DP_TCR, DP_TCR_NORMAL); /* Normal transmit operations */
-	DP_OUT(base, DP_RCR, DP_RCR_AB);  /* Accept broadcast, no errors, no multicast */
+	DP_OUT(base, DP_RCR, DP_RCR_AB); /* Accept broadcast, no errors, no multicast */
 	dp->running = true;
 }
 
 /*
-  This routine is called to start the transmitter.  It is split out from the
-  data handling routine so it may be called either when data becomes first
-  available or when an Tx interrupt occurs
-*/
+ * This routine is called to start the transmitter. It is split out from the
+ * data handling routine so it may be called either when data becomes first
+ * available or when an Tx interrupt occurs
+ */
 
 static void
 dp83902a_start_xmit(int start_page, int len)
@@ -249,9 +255,9 @@ dp83902a_start_xmit(int start_page, int len)
 }
 
 /*
-  This routine is called to send data to the hardware.  It is known a-priori
-  that there is free buffer space (dp->tx_next).
-*/
+ * This routine is called to send data to the hardware. It is known a-priori
+ * that there is free buffer space (dp->tx_next).
+ */
 static void
 dp83902a_send(u8 *data, int total_len, u32 key)
 {
@@ -265,7 +271,8 @@ dp83902a_send(u8 *data, int total_len, u32 key)
 	DEBUG_FUNCTION();
 
 	len = pkt_len = total_len;
-	if (pkt_len < IEEE_8023_MIN_FRAME) pkt_len = IEEE_8023_MIN_FRAME;
+	if (pkt_len < IEEE_8023_MIN_FRAME)
+		pkt_len = IEEE_8023_MIN_FRAME;
 
 	start_page = dp->tx_next;
 	if (dp->tx_next == dp->tx_buf1) {
@@ -284,17 +291,19 @@ dp83902a_send(u8 *data, int total_len, u32 key)
 	printf("TX prep page %d len %d\n", start_page, pkt_len);
 #endif
 
-	DP_OUT(base, DP_ISR, DP_ISR_RDC);  /* Clear end of DMA */
+	DP_OUT(base, DP_ISR, DP_ISR_RDC);	/* Clear end of DMA */
 	{
-		/* Dummy read. The manual sez something slightly different, */
-		/* but the code is extended a bit to do what Hitachi's monitor */
-		/* does (i.e., also read data). */
+		/*
+		 * Dummy read. The manual sez something slightly different,
+		 * but the code is extended a bit to do what Hitachi's monitor
+		 * does (i.e., also read data).
+		 */
 
 		u16 tmp;
 		int len = 1;
 
-		DP_OUT(base, DP_RSAL, 0x100-len);
-		DP_OUT(base, DP_RSAH, (start_page-1) & 0xff);
+		DP_OUT(base, DP_RSAL, 0x100 - len);
+		DP_OUT(base, DP_RSAH, (start_page - 1) & 0xff);
 		DP_OUT(base, DP_RBCL, len);
 		DP_OUT(base, DP_RBCH, 0);
 		DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_RDMA | DP_CR_START);
@@ -302,8 +311,10 @@ dp83902a_send(u8 *data, int total_len, u32 key)
 	}
 
 #ifdef CYGHWR_NS_DP83902A_PLF_BROKEN_TX_DMA
-	/* Stall for a bit before continuing to work around random data */
-	/* corruption problems on some platforms. */
+	/*
+	 * Stall for a bit before continuing to work around random data
+	 * corruption problems on some platforms.
+	 */
 	CYGACC_CALL_IF_DELAY_US(1);
 #endif
 
@@ -336,16 +347,18 @@ dp83902a_send(u8 *data, int total_len, u32 key)
 		printf("  + %d bytes of padding\n", pkt_len - total_len);
 #endif
 		/* Padding to 802.3 length was required */
-		for (i = total_len;  i < pkt_len;) {
+		for (i = total_len; i < pkt_len;) {
 			i++;
 			DP_OUT_DATA(dp->data, 0);
 		}
 	}
 
 #ifdef CYGHWR_NS_DP83902A_PLF_BROKEN_TX_DMA
-	/* After last data write, delay for a bit before accessing the */
-	/* device again, or we may get random data corruption in the last */
-	/* datum (on some platforms). */
+	/*
+	 * After last data write, delay for a bit before accessing the
+	 * device again, or we may get random data corruption in the last
+	 * datum (on some platforms).
+	 */
 	CYGACC_CALL_IF_DELAY_US(1);
 #endif
 
@@ -360,21 +373,21 @@ dp83902a_send(u8 *data, int total_len, u32 key)
 	/* Start transmit if not already going */
 	if (!dp->tx_started) {
 		if (start_page == dp->tx1) {
-			dp->tx_int = 1;  /* Expecting interrupt from BUF1 */
+			dp->tx_int = 1; /* Expecting interrupt from BUF1 */
 		} else {
-			dp->tx_int = 2;  /* Expecting interrupt from BUF2 */
+			dp->tx_int = 2; /* Expecting interrupt from BUF2 */
 		}
 		dp83902a_start_xmit(start_page, pkt_len);
 	}
 }
 
 /*
-  This function is called when a packet has been received.  It's job is
-  to prepare to unload the packet from the hardware.  Once the length of
-  the packet is known, the upper layer of the driver can be told.  When
-  the upper layer is ready to unload the packet, the internal function
-  'dp83902a_recv' will be called to actually fetch it from the hardware.
-*/
+ * This function is called when a packet has been received. It's job is
+ * to prepare to unload the packet from the hardware. Once the length of
+ * the packet is known, the upper layer of the driver can be told. When
+ * the upper layer is ready to unload the packet, the internal function
+ * 'dp83902a_recv' will be called to actually fetch it from the hardware.
+ */
 static void
 dp83902a_RxEvent(void)
 {
@@ -407,9 +420,9 @@ dp83902a_RxEvent(void)
 		DP_OUT(base, DP_RSAH, pkt);
 		if (dp->rx_next == pkt) {
 			if (cur == dp->rx_buf_start)
-				DP_OUT(base, DP_BNDRY, dp->rx_buf_end-1);
+				DP_OUT(base, DP_BNDRY, dp->rx_buf_end - 1);
 			else
-				DP_OUT(base, DP_BNDRY, cur-1); /* Update pointer */
+				DP_OUT(base, DP_BNDRY, cur - 1); /* Update pointer */
 			return;
 		}
 		dp->rx_next = pkt;
@@ -420,13 +433,13 @@ dp83902a_RxEvent(void)
 #endif
 
 		/* read header (get data size)*/
-		for (i = 0;  i < sizeof(rcv_hdr);) {
+		for (i = 0; i < sizeof(rcv_hdr);) {
 			DP_IN_DATA(dp->data, rcv_hdr[i++]);
 		}
 
 #if DEBUG & 5
 		printf("rx hdr %02x %02x %02x %02x\n",
-		       rcv_hdr[0], rcv_hdr[1], rcv_hdr[2], rcv_hdr[3]);
+			rcv_hdr[0], rcv_hdr[1], rcv_hdr[2], rcv_hdr[3]);
 #endif
 		len = ((rcv_hdr[3] << 8) | rcv_hdr[2]) - sizeof(rcv_hdr);
 
@@ -434,19 +447,19 @@ dp83902a_RxEvent(void)
 		uboot_push_packet_len(len);
 
 		if (rcv_hdr[1] == dp->rx_buf_start)
-			DP_OUT(base, DP_BNDRY, dp->rx_buf_end-1);
+			DP_OUT(base, DP_BNDRY, dp->rx_buf_end - 1);
 		else
-			DP_OUT(base, DP_BNDRY, rcv_hdr[1]-1); /* Update pointer */
+			DP_OUT(base, DP_BNDRY, rcv_hdr[1] - 1); /* Update pointer */
 	}
 }
 
 /*
-  This function is called as a result of the "eth_drv_recv()" call above.
-  It's job is to actually fetch data for a packet from the hardware once
-  memory buffers have been allocated for the packet.  Note that the buffers
-  may come in pieces, using a scatter-gather list.  This allows for more
-  efficient processing in the upper layers of the stack.
-*/
+ * This function is called as a result of the "eth_drv_recv()" call above.
+ * It's job is to actually fetch data for a packet from the hardware once
+ * memory buffers have been allocated for the packet. Note that the buffers
+ * may come in pieces, using a scatter-gather list. This allows for more
+ * efficient processing in the upper layers of the stack.
+ */
 static void
 dp83902a_recv(u8 *data, int len)
 {
@@ -478,7 +491,7 @@ dp83902a_recv(u8 *data, int len)
 #endif
 
 	saved = false;
-	for (i = 0;  i < 1;  i++) {
+	for (i = 0; i < 1; i++) {
 		if (data) {
 			mlen = len;
 #if DEBUG & 4
@@ -545,8 +558,10 @@ dp83902a_TxEvent(void)
 	uboot_push_tx_done(key, 0);
 }
 
-/* Read the tally counters to clear them.  Called in response to a CNT */
-/* interrupt. */
+/*
+ * Read the tally counters to clear them. Called in response to a CNT
+ * interrupt.
+ */
 static void
 dp83902a_ClearCounters(void)
 {
@@ -560,8 +575,10 @@ dp83902a_ClearCounters(void)
 	DP_OUT(base, DP_ISR, DP_ISR_CNT);
 }
 
-/* Deal with an overflow condition.  This code follows the procedure set */
-/* out in section 7.0 of the datasheet. */
+/*
+ * Deal with an overflow condition. This code follows the procedure set
+ * out in section 7.0 of the datasheet.
+ */
 static void
 dp83902a_Overflow(void)
 {
@@ -581,9 +598,11 @@ dp83902a_Overflow(void)
 	DP_OUT(base, DP_TCR, DP_TCR_LOCAL);
 	DP_OUT(base, DP_CR, DP_CR_START | DP_CR_NODMA);
 
-	/* Read in as many packets as we can and acknowledge any and receive */
-	/* interrupts.  Since the buffer has overflowed, a receive event of */
-	/* some kind will have occured. */
+	/*
+	 * Read in as many packets as we can and acknowledge any and receive
+	 * interrupts. Since the buffer has overflowed, a receive event of
+	 * some kind will have occured.
+	 */
 	dp83902a_RxEvent();
 	DP_OUT(base, DP_ISR, DP_ISR_RxP|DP_ISR_RxE);
 
@@ -591,8 +610,10 @@ dp83902a_Overflow(void)
 	DP_OUT(base, DP_ISR, DP_ISR_OFLW);
 	DP_OUT(base, DP_TCR, DP_TCR_NORMAL);
 
-	/* If a transmit command was issued, but no transmit event has occured, */
-	/* restart it here. */
+	/*
+	 * If a transmit command was issued, but no transmit event has occured,
+	 * restart it here.
+	 */
 	DP_IN(base, DP_ISR, isr);
 	if (dp->tx_started && !(isr & (DP_ISR_TxP|DP_ISR_TxE))) {
 		DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_TXPKT | DP_CR_START);
@@ -609,25 +630,33 @@ dp83902a_poll(void)
 	DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE0 | DP_CR_START);
 	DP_IN(base, DP_ISR, isr);
 	while (0 != isr) {
-		/* The CNT interrupt triggers when the MSB of one of the error */
-		/* counters is set.  We don't much care about these counters, but */
-		/* we should read their values to reset them. */
+		/*
+		 * The CNT interrupt triggers when the MSB of one of the error
+		 * counters is set. We don't much care about these counters, but
+		 * we should read their values to reset them.
+		 */
 		if (isr & DP_ISR_CNT) {
 			dp83902a_ClearCounters();
 		}
-		/* Check for overflow.  It's a special case, since there's a */
-		/* particular procedure that must be followed to get back into */
-		/* a running state.a */
+		/*
+		 * Check for overflow. It's a special case, since there's a
+		 * particular procedure that must be followed to get back into
+		 * a running state.a
+		 */
 		if (isr & DP_ISR_OFLW) {
 			dp83902a_Overflow();
 		} else {
-			/* Other kinds of interrupts can be acknowledged simply by */
-			/* clearing the relevant bits of the ISR.  Do that now, then */
-			/* handle the interrupts we care about. */
-			DP_OUT(base, DP_ISR, isr);      /* Clear set bits */
+			/*
+			 * Other kinds of interrupts can be acknowledged simply by
+			 * clearing the relevant bits of the ISR. Do that now, then
+			 * handle the interrupts we care about.
+			 */
+			DP_OUT(base, DP_ISR, isr);	/* Clear set bits */
 			if (!dp->running) break;	/* Is this necessary? */
-			/* Check for tx_started on TX event since these may happen */
-			/* spuriously it seems. */
+			/*
+			 * Check for tx_started on TX event since these may happen
+			 * spuriously it seems.
+			 */
 			if (isr & (DP_ISR_TxP|DP_ISR_TxE) && dp->tx_started) {
 				dp83902a_TxEvent();
 			}
@@ -658,8 +687,8 @@ typedef struct hw_info_t {
 #define HAS_MII		0x40
 #define USE_SHMEM	0x80	/* autodetected */
 
-#define AM79C9XX_HOME_PHY	0x00006B90  /* HomePNA PHY */
-#define AM79C9XX_ETH_PHY	0x00006B70  /* 10baseT PHY */
+#define AM79C9XX_HOME_PHY	0x00006B90	/* HomePNA PHY */
+#define AM79C9XX_ETH_PHY	0x00006B70	/* 10baseT PHY */
 #define MII_PHYID_REV_MASK	0xfffffff0
 #define MII_PHYID_REG1		0x02
 #define MII_PHYID_REG2		0x03
@@ -669,7 +698,7 @@ static hw_info_t hw_info[] = {
 	{ /* Allied Telesis LA-PCM */ 0x0ff0, 0x00, 0x00, 0xf4, 0 },
 	{ /* APEX MultiCard */ 0x03f4, 0x00, 0x20, 0xe5, 0 },
 	{ /* ASANTE FriendlyNet */ 0x4910, 0x00, 0x00, 0x94,
-	  DELAY_OUTPUT | HAS_IBM_MISC },
+			DELAY_OUTPUT | HAS_IBM_MISC },
 	{ /* Danpex EN-6200P2 */ 0x0110, 0x00, 0x40, 0xc7, 0 },
 	{ /* DataTrek NetCard */ 0x0ff0, 0x00, 0x20, 0xe8, 0 },
 	{ /* Dayna CommuniCard E */ 0x0110, 0x00, 0x80, 0x19, 0 },
@@ -677,48 +706,48 @@ static hw_info_t hw_info[] = {
 	{ /* EP-210 Ethernet */ 0x0110, 0x00, 0x40, 0x33, 0 },
 	{ /* EP4000 Ethernet */ 0x01c0, 0x00, 0x00, 0xb4, 0 },
 	{ /* Epson EEN10B */ 0x0ff0, 0x00, 0x00, 0x48,
-	  HAS_MISC_REG | HAS_IBM_MISC },
+			HAS_MISC_REG | HAS_IBM_MISC },
 	{ /* ELECOM Laneed LD-CDWA */ 0xb8, 0x08, 0x00, 0x42, 0 },
 	{ /* Hypertec Ethernet */ 0x01c0, 0x00, 0x40, 0x4c, 0 },
 	{ /* IBM CCAE */ 0x0ff0, 0x08, 0x00, 0x5a,
-	  HAS_MISC_REG | HAS_IBM_MISC },
+			HAS_MISC_REG | HAS_IBM_MISC },
 	{ /* IBM CCAE */ 0x0ff0, 0x00, 0x04, 0xac,
-	  HAS_MISC_REG | HAS_IBM_MISC },
+			HAS_MISC_REG | HAS_IBM_MISC },
 	{ /* IBM CCAE */ 0x0ff0, 0x00, 0x06, 0x29,
-	  HAS_MISC_REG | HAS_IBM_MISC },
+			HAS_MISC_REG | HAS_IBM_MISC },
 	{ /* IBM FME */ 0x0374, 0x08, 0x00, 0x5a,
-	  HAS_MISC_REG | HAS_IBM_MISC },
+			HAS_MISC_REG | HAS_IBM_MISC },
 	{ /* IBM FME */ 0x0374, 0x00, 0x04, 0xac,
-	  HAS_MISC_REG | HAS_IBM_MISC },
+			HAS_MISC_REG | HAS_IBM_MISC },
 	{ /* Kansai KLA-PCM/T */ 0x0ff0, 0x00, 0x60, 0x87,
-	  HAS_MISC_REG | HAS_IBM_MISC },
+			HAS_MISC_REG | HAS_IBM_MISC },
 	{ /* NSC DP83903 */ 0x0374, 0x08, 0x00, 0x17,
-	  HAS_MISC_REG | HAS_IBM_MISC },
+			HAS_MISC_REG | HAS_IBM_MISC },
 	{ /* NSC DP83903 */ 0x0374, 0x00, 0xc0, 0xa8,
-	  HAS_MISC_REG | HAS_IBM_MISC },
+			HAS_MISC_REG | HAS_IBM_MISC },
 	{ /* NSC DP83903 */ 0x0374, 0x00, 0xa0, 0xb0,
-	  HAS_MISC_REG | HAS_IBM_MISC },
+			HAS_MISC_REG | HAS_IBM_MISC },
 	{ /* NSC DP83903 */ 0x0198, 0x00, 0x20, 0xe0,
-	  HAS_MISC_REG | HAS_IBM_MISC },
+			HAS_MISC_REG | HAS_IBM_MISC },
 	{ /* I-O DATA PCLA/T */ 0x0ff0, 0x00, 0xa0, 0xb0, 0 },
 	{ /* Katron PE-520 */ 0x0110, 0x00, 0x40, 0xf6, 0 },
 	{ /* Kingston KNE-PCM/x */ 0x0ff0, 0x00, 0xc0, 0xf0,
-	  HAS_MISC_REG | HAS_IBM_MISC },
+			HAS_MISC_REG | HAS_IBM_MISC },
 	{ /* Kingston KNE-PCM/x */ 0x0ff0, 0xe2, 0x0c, 0x0f,
-	  HAS_MISC_REG | HAS_IBM_MISC },
+			HAS_MISC_REG | HAS_IBM_MISC },
 	{ /* Kingston KNE-PC2 */ 0x0180, 0x00, 0xc0, 0xf0, 0 },
 	{ /* Maxtech PCN2000 */ 0x5000, 0x00, 0x00, 0xe8, 0 },
 	{ /* NDC Instant-Link */ 0x003a, 0x00, 0x80, 0xc6, 0 },
 	{ /* NE2000 Compatible */ 0x0ff0, 0x00, 0xa0, 0x0c, 0 },
 	{ /* Network General Sniffer */ 0x0ff0, 0x00, 0x00, 0x65,
-	  HAS_MISC_REG | HAS_IBM_MISC },
+			HAS_MISC_REG | HAS_IBM_MISC },
 	{ /* Panasonic VEL211 */ 0x0ff0, 0x00, 0x80, 0x45,
-	  HAS_MISC_REG | HAS_IBM_MISC },
+			HAS_MISC_REG | HAS_IBM_MISC },
 	{ /* PreMax PE-200 */ 0x07f0, 0x00, 0x20, 0xe0, 0 },
 	{ /* RPTI EP400 */ 0x0110, 0x00, 0x40, 0x95, 0 },
 	{ /* SCM Ethernet */ 0x0ff0, 0x00, 0x20, 0xcb, 0 },
 	{ /* Socket EA */ 0x4000, 0x00, 0xc0, 0x1b,
-	  DELAY_OUTPUT | HAS_MISC_REG | USE_BIG_BUF },
+			DELAY_OUTPUT | HAS_MISC_REG | USE_BIG_BUF },
 	{ /* Socket LP-E CF+ */ 0x01c0, 0x00, 0xc0, 0x1b, 0 },
 	{ /* SuperSocket RE450T */ 0x0110, 0x00, 0xe0, 0x98, 0 },
 	{ /* Volktek NPL-402CT */ 0x0060, 0x00, 0x40, 0x05, 0 },
@@ -729,8 +758,6 @@ static hw_info_t hw_info[] = {
 
 #define NR_INFO		(sizeof(hw_info)/sizeof(hw_info_t))
 
-static hw_info_t default_info = { 0, 0, 0, 0, 0 };
-
 u8 dev_addr[6];
 
 #define PCNET_CMD	0x00
@@ -738,17 +765,104 @@ u8 dev_addr[6];
 #define PCNET_RESET	0x1f	/* Issue a read to reset, a write to clear. */
 #define PCNET_MISC	0x18	/* For IBM CCAE and Socket EA cards */
 
+static void pcnet_reset_8390(void)
+{
+	int i, r;
+
+	PRINTK("nic base is %lx\n", nic_base);
+
+	n2k_outb(E8390_NODMA + E8390_PAGE0+E8390_STOP, E8390_CMD);
+	PRINTK("cmd (at %lx) is %x\n", nic_base + E8390_CMD, n2k_inb(E8390_CMD));
+	n2k_outb(E8390_NODMA+E8390_PAGE1+E8390_STOP, E8390_CMD);
+	PRINTK("cmd (at %lx) is %x\n", nic_base + E8390_CMD, n2k_inb(E8390_CMD));
+	n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
+	PRINTK("cmd (at %lx) is %x\n", nic_base + E8390_CMD, n2k_inb(E8390_CMD));
+	n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
+
+	n2k_outb(n2k_inb(PCNET_RESET), PCNET_RESET);
+
+	for (i = 0; i < 100; i++) {
+		if ((r = (n2k_inb(EN0_ISR) & ENISR_RESET)) != 0)
+			break;
+		PRINTK("got %x in reset\n", r);
+		udelay(100);
+	}
+	n2k_outb(ENISR_RESET, EN0_ISR); /* Ack intr. */
+
+	if (i == 100)
+		printf("pcnet_reset_8390() did not complete.\n");
+} /* pcnet_reset_8390 */
+
+int get_prom(u8* mac_addr) __attribute__ ((weak, alias ("__get_prom")));
+int __get_prom(u8* mac_addr)
+{
+	u8 prom[32];
+	int i, j;
+	struct {
+		u_char value, offset;
+	} program_seq[] = {
+		{E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, /* Select page 0*/
+		{0x48, EN0_DCFG},		/* Set byte-wide (0x48) access. */
+		{0x00, EN0_RCNTLO},		/* Clear the count regs. */
+		{0x00, EN0_RCNTHI},
+		{0x00, EN0_IMR},		/* Mask completion irq. */
+		{0xFF, EN0_ISR},
+		{E8390_RXOFF, EN0_RXCR},	/* 0x20 Set to monitor */
+		{E8390_TXOFF, EN0_TXCR},	/* 0x02 and loopback mode. */
+		{32, EN0_RCNTLO},
+		{0x00, EN0_RCNTHI},
+		{0x00, EN0_RSARLO},		/* DMA starting@0x0000. */
+		{0x00, EN0_RSARHI},
+		{E8390_RREAD+E8390_START, E8390_CMD},
+	};
+
+	PRINTK ("trying to get MAC via prom reading\n");
+
+	pcnet_reset_8390 ();
+
+	mdelay (10);
+
+	for (i = 0; i < sizeof (program_seq) / sizeof (program_seq[0]); i++)
+		n2k_outb (program_seq[i].value, program_seq[i].offset);
+
+	PRINTK ("PROM:");
+	for (i = 0; i < 32; i++) {
+		prom[i] = n2k_inb (PCNET_DATAPORT);
+		PRINTK (" %02x", prom[i]);
+	}
+	PRINTK ("\n");
+	for (i = 0; i < NR_INFO; i++) {
+		if ((prom[0] == hw_info[i].a0) &&
+			(prom[2] == hw_info[i].a1) &&
+			(prom[4] == hw_info[i].a2)) {
+			PRINTK ("matched board %d\n", i);
+			break;
+		}
+	}
+	if ((i < NR_INFO) || ((prom[28] == 0x57) && (prom[30] == 0x57))) {
+		PRINTK ("on exit i is %d/%ld\n", i, NR_INFO);
+		PRINTK ("MAC address is ");
+		for (j = 0; j < 6; j++) {
+			mac_addr[j] = prom[j << 1];
+			PRINTK ("%02x:", mac_addr[i]);
+		}
+		PRINTK ("\n");
+		return (i < NR_INFO) ? i : 0;
+	}
+	return 0;
+}
+
 u32 nic_base;
 
 /* U-boot specific routines */
 static u8 *pbuf = NULL;
 
 static int pkey = -1;
-static int initialized=0;
+static int initialized = 0;
 
 void uboot_push_packet_len(int len) {
 	PRINTK("pushed len = %d\n", len);
-	if (len>=2000) {
+	if (len >= 2000) {
 		printf("NE2000: packet too big\n");
 		return;
 	}
@@ -764,7 +878,7 @@ void uboot_push_tx_done(int key, int val) {
 }
 
 int eth_init(bd_t *bd) {
-	static hw_info_t * r;
+	int r;
 	char ethaddr[20];
 
 	PRINTK("### eth_init\n");
@@ -779,7 +893,7 @@ int eth_init(bd_t *bd) {
 
 #ifdef CONFIG_DRIVER_NE2000_CCR
 	{
-		vu_char *p =  (vu_char *) CONFIG_DRIVER_NE2000_CCR;
+		vu_char *p = (vu_char *) CONFIG_DRIVER_NE2000_CCR;
 
 		PRINTK("CCR before is %x\n", *p);
 		*p = CONFIG_DRIVER_NE2000_VAL;
@@ -811,7 +925,7 @@ int eth_init(bd_t *bd) {
 		return -1;
 
 	dp83902a_start(dev_addr);
-	initialized=1;
+	initialized = 1;
 
 	return 0;
 }
@@ -821,7 +935,7 @@ void eth_halt() {
 	PRINTK("### eth_halt\n");
 	if(initialized)
 		dp83902a_stop();
-	initialized=0;
+	initialized = 0;
 }
 
 int eth_rx() {
diff --git a/drivers/net/ne2000.h b/drivers/net/ne2000.h
index d324a00..0b21612 100644
--- a/drivers/net/ne2000.h
+++ b/drivers/net/ne2000.h
@@ -81,6 +81,7 @@ are GPL, so this is, of course, GPL.
 
 #define DP_DATA     0x10
 #define START_PG    0x50    /* First page of TX buffer */
+#define START_PG2   0x48
 #define STOP_PG     0x80    /* Last page +1 of RX ring */
 
 #define RX_START    0x50
@@ -90,90 +91,4 @@ are GPL, so this is, of course, GPL.
 #define DP_OUT(_b_, _o_, _d_) *( (vu_char *) ((_b_)+(_o_))) = (_d_)
 #define DP_IN_DATA(_b_, _d_)  (_d_) = *( (vu_char *) ((_b_)))
 #define DP_OUT_DATA(_b_, _d_) *( (vu_char *) ((_b_))) = (_d_)
-
-static void pcnet_reset_8390(void)
-{
-	int i, r;
-
-	PRINTK("nic base is %lx\n", nic_base);
-
-	n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
-	PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD));
-	n2k_outb(E8390_NODMA+E8390_PAGE1+E8390_STOP, E8390_CMD);
-	PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD));
-	n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
-	PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD));
-	n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
-
-	n2k_outb(n2k_inb(PCNET_RESET), PCNET_RESET);
-
-	for (i = 0; i < 100; i++) {
-		if ((r = (n2k_inb(EN0_ISR) & ENISR_RESET)) != 0)
-			break;
-		PRINTK("got %x in reset\n", r);
-		udelay(100);
-	}
-	n2k_outb(ENISR_RESET, EN0_ISR); /* Ack intr. */
-
-	if (i == 100)
-		printf("pcnet_reset_8390() did not complete.\n");
-} /* pcnet_reset_8390 */
-
-int get_prom(u8* mac_addr)
-{
-	u8 prom[32];
-	int i, j;
-	struct {
-		u_char value, offset;
-	} program_seq[] = {
-		{E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, /* Select page 0*/
-		{0x48,  EN0_DCFG},		/* Set byte-wide (0x48) access. */
-		{0x00,  EN0_RCNTLO},		/* Clear the count regs. */
-		{0x00,  EN0_RCNTHI},
-		{0x00,  EN0_IMR},		/* Mask completion irq. */
-		{0xFF,  EN0_ISR},
-		{E8390_RXOFF, EN0_RXCR},	/* 0x20  Set to monitor */
-		{E8390_TXOFF, EN0_TXCR},	/* 0x02  and loopback mode. */
-		{32,    EN0_RCNTLO},
-		{0x00,  EN0_RCNTHI},
-		{0x00,  EN0_RSARLO},		/* DMA starting@0x0000. */
-		{0x00,  EN0_RSARHI},
-		{E8390_RREAD+E8390_START, E8390_CMD},
-	};
-
-	PRINTK ("trying to get MAC via prom reading\n");
-
-	pcnet_reset_8390 ();
-
-	mdelay (10);
-
-	for (i = 0; i < sizeof (program_seq) / sizeof (program_seq[0]); i++)
-		n2k_outb (program_seq[i].value, program_seq[i].offset);
-
-	PRINTK ("PROM:");
-	for (i = 0; i < 32; i++) {
-		prom[i] = n2k_inb (PCNET_DATAPORT);
-		PRINTK (" %02x", prom[i]);
-	}
-	PRINTK ("\n");
-	for (i = 0; i < NR_INFO; i++) {
-		if ((prom[0] == hw_info[i].a0) &&
-		    (prom[2] == hw_info[i].a1) &&
-		    (prom[4] == hw_info[i].a2)) {
-			PRINTK ("matched board %d\n", i);
-			break;
-		}
-	}
-	if ((i < NR_INFO) || ((prom[28] == 0x57) && (prom[30] == 0x57))) {
-		PRINTK ("on exit i is %d/%ld\n", i, NR_INFO);
-		PRINTK ("MAC address is ");
-		for (j = 0; j < 6; j++) {
-			mac_addr[j] = prom[j << 1];
-			PRINTK ("%02x:", mac_addr[i]);
-		}
-		PRINTK ("\n");
-		return (i < NR_INFO) ? i : 0;
-	}
-	return NULL;
-}
 #endif /* __DRIVERS_NE2000_H__ */
diff --git a/drivers/net/ne2000_base.h b/drivers/net/ne2000_base.h
index 1badf62..d8768e8 100644
--- a/drivers/net/ne2000_base.h
+++ b/drivers/net/ne2000_base.h
@@ -120,7 +120,6 @@ typedef struct dp83902a_priv_data {
  ------------------------------------------------------------------------
  Some forward declarations
 */
-int get_prom( u8* mac_addr);
 static void dp83902a_poll(void);
 
 /* ------------------------------------------------------------------------ */
-- 
1.5.4.5

^ permalink raw reply related	[flat|nested] 24+ messages in thread
end of thread, other threads:[~2008-04-25  7:16 UTC | newest]

Thread overview: 24+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-04-21 17:22 [U-Boot-Users] [PATCH 0/2] NE2000: Fix regresssion introduced by e710185aae90 on non AX88796 Jean-Christophe PLAGNIOL-VILLARD
2008-04-21 17:22 ` [U-Boot-Users] [PATCH 1/2] qemu-mips: add CFI support and coding style cleanup Jean-Christophe PLAGNIOL-VILLARD
2008-04-21 17:22   ` [U-Boot-Users] [PATCH 2/2] qemu-mips: add full functionnalty and support of CONFIG_SMALLEST Jean-Christophe PLAGNIOL-VILLARD
2008-04-21 17:48     ` [U-Boot-Users] [PATCH 2/2 V2] " Jean-Christophe PLAGNIOL-VILLARD
2008-04-21 19:26       ` Wolfgang Denk
2008-04-22  6:26         ` Jean-Christophe PLAGNIOL-VILLARD
2008-04-22 10:01           ` Wolfgang Denk
2008-04-22  7:26         ` Shinya Kuribayashi
2008-04-22  7:38           ` Shinya Kuribayashi
2008-04-22 15:10   ` [U-Boot-Users] [PATCH 1/2][MIPS] qemu-mips: Cleanup whiespaces, tab indentations, etc Shinya Kuribayashi
2008-04-22 15:32     ` Wolfgang Denk
2008-04-22 15:35       ` Shinya Kuribayashi
2008-04-22 20:50       ` Jean-Christophe PLAGNIOL-VILLARD
2008-04-23  2:02         ` Shinya Kuribayashi
2008-04-25  7:16           ` Wolfgang Denk
2008-04-22 15:11   ` [U-Boot-Users] [PATCH 2/2][MIPS] qemu-mips.h: Add CFI support Shinya Kuribayashi
2008-04-25  7:16     ` Wolfgang Denk
2008-04-21 19:24 ` [U-Boot-Users] [PATCH 0/2] NE2000: Fix regresssion introduced by e710185aae90 on non AX88796 Wolfgang Denk
2008-04-22  6:28   ` Jean-Christophe PLAGNIOL-VILLARD
2008-04-22 10:02     ` Wolfgang Denk
     [not found]       ` <1209015794-9805-1-git-send-email-plagnioj@jcrosoft.com>
2008-04-24  5:43         ` [U-Boot-Users] [PATCH 1/1] " Jean-Christophe PLAGNIOL-VILLARD
2008-04-24  5:57           ` [U-Boot-Users] [PATCH 0/1 V2] NE2000: coding style cleanup Jean-Christophe PLAGNIOL-VILLARD
2008-04-24  5:57             ` [U-Boot-Users] [PATCH 1/1 V2] NE2000: Fix regresssion introduced by e710185aae90 on non AX88796 Jean-Christophe PLAGNIOL-VILLARD
2008-04-25  7:16             ` [U-Boot-Users] [PATCH 0/1 V2] NE2000: coding style cleanup Wolfgang Denk

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.