From: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
To: Adrian Bunk <bunk@kernel.org>
Cc: kernel list <linux-kernel@vger.kernel.org>,
linuxppc-dev@ozlabs.org, Al Viro <viro@zeniv.linux.org.uk>,
Ingo Molnar <mingo@elte.hu>,
Balbir Singh <balbir@linux.vnet.ibm.com>
Subject: Re: [BUG] 2.6.25-git8 Kernel Bug while bootup on ppc and x86
Date: Sat, 26 Apr 2008 18:00:42 +0530 [thread overview]
Message-ID: <48132072.9060308@linux.vnet.ibm.com> (raw)
In-Reply-To: <20080426113040.GC2252@cs181133002.pp.htv.fi>
Adrian Bunk wrote:
> On Sat, Apr 26, 2008 at 04:51:54PM +0530, Kamalesh Babulal wrote:
>> While booting the 2.6.25-git8 kernel on the ppc and x86_64 machine, kernel
>> bug is hit. This was reported in the next-20080423 kernel
>> http://lkml.org/lkml/2008/4/23/206.
>>
>> Call trace of x86_64 machine
>>
>> BUG: unable to handle kernel paging request at 00000000ffffffff
>> IP: [<ffffffff802359e5>] put_files_struct+0x25/0x110
>> PGD 0
>> Oops: 0002 [333] SMP
>> CPU 3
>> Modules linked in:
>> Pid: 1391, comm: khelper Tainted: G D 2.6.25-git8-autotest #1
>> RIP: 0010:[<ffffffff802359e5>] [<ffffffff802359e5>] put_files_struct+0x25/0x110
>> RSP: 0000:ffff81090d06bdb0 EFLAGS: 00010282
>> RAX: 0000000000000101 RBX: fffffffffffffffe RCX: ffff8100010260e0
>> RDX: 0000000000000007 RSI: 0000000000000001 RDI: 00000000ffffffff
>> RBP: 00000000fffffffe R08: 2222222222222267 R09: 2222222222222222
>> R10: 0000000000000010 R11: 2222222222222222 R12: 00000000ffffffff
>> R13: ffff81032d2e9000 R14: ffff81090e74b000 R15: ffff81061e4cbce0
>> FS: 0000000000000000(0000) GS:ffff81032e4ae940(0000) knlGS:0000000000000000
>> CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
>> CR2: 00000000ffffffff CR3: 0000000000201000 CR4: 00000000000006e0
>> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
>> Process khelper (pid: 1391, threadinfo ffff81090d06a000, task ffff81090d8113a0)
>> Stack: ffff81090d8113a0 fffffffffffffffe 00000000fffffffe ffff81032e556e00
>> ffff81032d2e9000 ffff81090e74b000 ffff81061e4cbce0 ffffffff80294278
>> ffff81090d06be70 ffffffff80636bc0 ffff81090d3646c0 ffff81032d2e9000
>> Call Trace:
>> [<ffffffff80294278>] do_execve+0x108/0x230
>> ...
>
> Most likely fixed by
> http://lkml.org/lkml/2008/4/26/1
Hi Adrian,
Thanks, the patch fixes the boot up bug.
--
Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.
WARNING: multiple messages have this Message-ID (diff)
From: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
To: Adrian Bunk <bunk@kernel.org>
Cc: kernel list <linux-kernel@vger.kernel.org>,
linuxppc-dev@ozlabs.org, Ingo Molnar <mingo@elte.hu>,
apw@shadowen.org, Balbir Singh <balbir@linux.vnet.ibm.com>,
Al Viro <viro@zeniv.linux.org.uk>
Subject: Re: [BUG] 2.6.25-git8 Kernel Bug while bootup on ppc and x86
Date: Sat, 26 Apr 2008 18:00:42 +0530 [thread overview]
Message-ID: <48132072.9060308@linux.vnet.ibm.com> (raw)
In-Reply-To: <20080426113040.GC2252@cs181133002.pp.htv.fi>
Adrian Bunk wrote:
> On Sat, Apr 26, 2008 at 04:51:54PM +0530, Kamalesh Babulal wrote:
>> While booting the 2.6.25-git8 kernel on the ppc and x86_64 machine, kernel
>> bug is hit. This was reported in the next-20080423 kernel
>> http://lkml.org/lkml/2008/4/23/206.
>>
>> Call trace of x86_64 machine
>>
>> BUG: unable to handle kernel paging request at 00000000ffffffff
>> IP: [<ffffffff802359e5>] put_files_struct+0x25/0x110
>> PGD 0
>> Oops: 0002 [333] SMP
>> CPU 3
>> Modules linked in:
>> Pid: 1391, comm: khelper Tainted: G D 2.6.25-git8-autotest #1
>> RIP: 0010:[<ffffffff802359e5>] [<ffffffff802359e5>] put_files_struct+0x25/0x110
>> RSP: 0000:ffff81090d06bdb0 EFLAGS: 00010282
>> RAX: 0000000000000101 RBX: fffffffffffffffe RCX: ffff8100010260e0
>> RDX: 0000000000000007 RSI: 0000000000000001 RDI: 00000000ffffffff
>> RBP: 00000000fffffffe R08: 2222222222222267 R09: 2222222222222222
>> R10: 0000000000000010 R11: 2222222222222222 R12: 00000000ffffffff
>> R13: ffff81032d2e9000 R14: ffff81090e74b000 R15: ffff81061e4cbce0
>> FS: 0000000000000000(0000) GS:ffff81032e4ae940(0000) knlGS:0000000000000000
>> CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
>> CR2: 00000000ffffffff CR3: 0000000000201000 CR4: 00000000000006e0
>> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
>> Process khelper (pid: 1391, threadinfo ffff81090d06a000, task ffff81090d8113a0)
>> Stack: ffff81090d8113a0 fffffffffffffffe 00000000fffffffe ffff81032e556e00
>> ffff81032d2e9000 ffff81090e74b000 ffff81061e4cbce0 ffffffff80294278
>> ffff81090d06be70 ffffffff80636bc0 ffff81090d3646c0 ffff81032d2e9000
>> Call Trace:
>> [<ffffffff80294278>] do_execve+0x108/0x230
>> ...
>
> Most likely fixed by
> http://lkml.org/lkml/2008/4/26/1
Hi Adrian,
Thanks, the patch fixes the boot up bug.
--
Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.
next prev parent reply other threads:[~2008-04-26 12:30 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-26 11:21 [BUG] 2.6.25-git8 Kernel Bug while bootup on ppc and x86 Kamalesh Babulal
2008-04-26 11:21 ` Kamalesh Babulal
2008-04-26 11:30 ` Adrian Bunk
2008-04-26 11:30 ` Adrian Bunk
2008-04-26 12:30 ` Kamalesh Babulal [this message]
2008-04-26 12:30 ` Kamalesh Babulal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48132072.9060308@linux.vnet.ibm.com \
--to=kamalesh@linux.vnet.ibm.com \
--cc=balbir@linux.vnet.ibm.com \
--cc=bunk@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=mingo@elte.hu \
--cc=viro@zeniv.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.