From: Mark Lord <liml@rtr.ca>
To: Jeff Garzik <jgarzik@pobox.com>, Tejun Heo <htejun@gmail.com>,
IDE/ATA development list <linux-ide@vger.kernel.org>
Subject: [PATCH 07/12] sata_mv NCQ and SError fixes for mv_err_intr
Date: Fri, 02 May 2008 02:12:34 -0400 [thread overview]
Message-ID: <481AB0D2.3070103@rtr.ca> (raw)
In-Reply-To: <481AB0A1.3040009@rtr.ca>
Sigh. Undo some earlier changes to mv_port_intr(),
so that we now read/clear SError again in all cases.
Arrange the top of the function to be as close as possible
to what we need for a later update (in this series) for ERR_DEV handling.
Fix things so that libata-eh can attempt a READ_LOG_EXT_10H
in response to a failed NCQ command, by just doing a local
mv_eh_freeze() rather than ata_port_freeze().
This will now fully handle NCQ errors much of the time,
but more fixes are needed for FBS/PMP, and for certain chip errata.
Signed-off-by: Mark Lord <mlord@pobox.com>
--- old/drivers/ata/sata_mv.c 2008-05-01 18:18:27.000000000 -0400
+++ linux/drivers/ata/sata_mv.c 2008-05-01 18:39:27.000000000 -0400
@@ -1627,7 +1627,7 @@
* LOCKING:
* Inherited from caller.
*/
-static void mv_err_intr(struct ata_port *ap, struct ata_queued_cmd *qc)
+static void mv_err_intr(struct ata_port *ap)
{
void __iomem *port_mmio = mv_ap_base(ap);
u32 edma_err_cause, eh_freeze_mask, serr = 0;
@@ -1635,24 +1635,33 @@
struct mv_host_priv *hpriv = ap->host->private_data;
unsigned int action = 0, err_mask = 0;
struct ata_eh_info *ehi = &ap->link.eh_info;
-
- ata_ehi_clear_desc(ehi);
+ struct ata_queued_cmd *qc;
+ int abort = 0;
/*
- * Read and clear the err_cause bits. This won't actually
- * clear for some errors (eg. SError), but we will be doing
- * a hard reset in those cases regardless, which *will* clear it.
+ * Read and clear the SError and err_cause bits.
*/
+ sata_scr_read(&ap->link, SCR_ERROR, &serr);
+ sata_scr_write_flush(&ap->link, SCR_ERROR, serr);
+
edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
writelfl(~edma_err_cause, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
- ata_ehi_push_desc(ehi, "edma_err_cause=%08x", edma_err_cause);
+ ata_port_printk(ap, KERN_INFO, "%s: err_cause=%08x pp_flags=0x%x\n",
+ __func__, edma_err_cause, pp->pp_flags);
+ qc = mv_get_active_qc(ap);
+ ata_ehi_clear_desc(ehi);
+ ata_ehi_push_desc(ehi, "edma_err_cause=%08x pp_flags=%08x",
+ edma_err_cause, pp->pp_flags);
/*
* All generations share these EDMA error cause bits:
*/
- if (edma_err_cause & EDMA_ERR_DEV)
+ if (edma_err_cause & EDMA_ERR_DEV) {
err_mask |= AC_ERR_DEV;
+ action |= ATA_EH_RESET;
+ ata_ehi_push_desc(ehi, "dev error");
+ }
if (edma_err_cause & (EDMA_ERR_D_PAR | EDMA_ERR_PRD_PAR |
EDMA_ERR_CRQB_PAR | EDMA_ERR_CRPB_PAR |
EDMA_ERR_INTRL_PAR)) {
@@ -1684,13 +1693,6 @@
ata_ehi_push_desc(ehi, "EDMA self-disable");
}
if (edma_err_cause & EDMA_ERR_SERR) {
- /*
- * Ensure that we read our own SCR, not a pmp link SCR:
- */
- ap->ops->scr_read(ap, SCR_ERROR, &serr);
- /*
- * Don't clear SError here; leave it for libata-eh:
- */
ata_ehi_push_desc(ehi, "SError=%08x", serr);
err_mask |= AC_ERR_ATA_BUS;
action |= ATA_EH_RESET;
@@ -1710,10 +1712,29 @@
else
ehi->err_mask |= err_mask;
- if (edma_err_cause & eh_freeze_mask)
+ if (err_mask == AC_ERR_DEV) {
+ /*
+ * Cannot do ata_port_freeze() here,
+ * because it would kill PIO access,
+ * which is needed for further diagnosis.
+ */
+ mv_eh_freeze(ap);
+ abort = 1;
+ } else if (edma_err_cause & eh_freeze_mask) {
+ /*
+ * Note to self: ata_port_freeze() calls ata_port_abort()
+ */
ata_port_freeze(ap);
- else
- ata_port_abort(ap);
+ } else {
+ abort = 1;
+ }
+
+ if (abort) {
+ if (qc)
+ ata_link_abort(qc->dev->link);
+ else
+ ata_port_abort(ap);
+ }
}
static void mv_process_crpb_response(struct ata_port *ap,
@@ -1740,8 +1761,9 @@
}
}
ata_status = edma_status >> CRPB_FLAG_STATUS_SHIFT;
- qc->err_mask |= ac_err_mask(ata_status);
- ata_qc_complete(qc);
+ if (!ac_err_mask(ata_status))
+ ata_qc_complete(qc);
+ /* else: leave it for mv_err_intr() */
} else {
ata_port_printk(ap, KERN_ERR, "%s: no qc for tag=%d\n",
__func__, tag);
@@ -1845,7 +1867,7 @@
* Handle chip-reported errors, or continue on to handle PIO.
*/
if (unlikely(port_cause & ERR_IRQ)) {
- mv_err_intr(ap, mv_get_active_qc(ap));
+ mv_err_intr(ap);
} else if (hc_irq_cause & (DEV_IRQ << hardport)) {
if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN)) {
struct ata_queued_cmd *qc = mv_get_active_qc(ap);
next prev parent reply other threads:[~2008-05-02 6:12 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-02 6:07 [PATCH 00/12] sata_mv: The last big set for 2.6.26 Mark Lord
2008-05-02 6:07 ` [PATCH 01/12] sata_mv more cosmetic changes Mark Lord
2008-05-02 6:08 ` [PATCH 02/12] sata_mv pci features Mark Lord
2008-05-02 6:09 ` [PATCH 03/12] sata_mv wait for empty+idle Mark Lord
2008-05-02 6:10 ` [PATCH 04/12] sata_mv new mv_qc_defer method Mark Lord
2008-05-02 6:10 ` [PATCH 05/12] sata_mv errata workaround for sata25 part 1 Mark Lord
2008-05-02 6:11 ` [PATCH 06/12] sata_mv rearrange mv_config_fbs Mark Lord
2008-05-02 6:12 ` Mark Lord [this message]
2008-05-02 6:13 ` [PATCH 08/12] sata_mv fix mv_host_intr bug for hc_irq_cause Mark Lord
2008-05-02 6:14 ` [PATCH 09/12] sata_mv new mv_port_intr function Mark Lord
2008-05-02 6:14 ` [PATCH 10/12] sata_mv libata: export ata_eh_analyze_ncq_error Mark Lord
2008-05-02 6:15 ` [PATCH 11/12] sata_mv delayed eh handling Mark Lord
2008-05-02 6:16 ` [PATCH 12/12] sata_mv NCQ-EH for FIS-based switching Mark Lord
2008-05-02 12:44 ` Mark Lord
2008-05-02 16:52 ` Grant Grundler
2008-05-02 16:54 ` Grant Grundler
2008-05-02 17:46 ` Mark Lord
2008-05-02 17:52 ` Alan Cox
2008-05-02 17:56 ` [PATCH 13/13] sata_mv use hweight16() for bit counting Mark Lord
2008-05-02 18:02 ` Mark Lord
2008-05-02 18:02 ` [PATCH 13/13] sata_mv use hweight16() for bit counting (V2) Mark Lord
2008-05-02 18:31 ` Grant Grundler
2008-05-02 16:42 ` [PATCH 03/12] sata_mv wait for empty+idle Grant Grundler
2008-05-02 17:45 ` Mark Lord
2008-05-02 18:39 ` Grant Grundler
2008-05-02 20:09 ` Mark Lord
2008-05-02 16:06 ` [PATCH 02/12] sata_mv pci features Grant Grundler
2008-05-02 17:41 ` Mark Lord
2008-05-02 18:28 ` Grant Grundler
2008-05-06 14:10 ` [PATCH 01/12] sata_mv more cosmetic changes Jeff Garzik
2008-05-06 17:57 ` Mark Lord
2008-05-06 14:17 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=481AB0D2.3070103@rtr.ca \
--to=liml@rtr.ca \
--cc=htejun@gmail.com \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.