All of lore.kernel.org
 help / color / mirror / Atom feed
From: "John R." <johnr@wowway.com>
To: alsa-devel@alsa-project.org
Subject: Re: Another unknown bt878
Date: Fri, 02 May 2008 06:40:25 -0500	[thread overview]
Message-ID: <481AFDA9.8040000@wowway.com> (raw)
In-Reply-To: <s5hzlrsdc4h.wl%tiwai@suse.de>

On Thu, Apr 17, 2008 at 12:11:42PM +0200, Takashi Iwai wrote:
 > > At Mon, 14 Apr 2008 23:17:47 -0500,
 > > John R. wrote:
 >> > >
 >> > > Sound doesn't work on my bt878 based card.  Let me know what other
 >> > > information is needed...
 > >
 > > Please elaborate what "sound doesn't work" means?

Looks like I don't fully understand how it is not working.  I could be 
pretty far off base with what I am trying...

amixer settings for each of the 4 devices that comes up:

amixer -c1
Simple mixer control 'FM',0
   Capabilities: cswitch cswitch-joined cswitch-exclusive
   Capture exclusive group: 0
   Capture channels: Mono
   Mono: Capture [off]
Simple mixer control 'Mic/Line',0
   Capabilities: cswitch cswitch-joined cswitch-exclusive
   Capture exclusive group: 0
   Capture channels: Mono
   Mono: Capture [off]
Simple mixer control 'Capture',0
   Capabilities: cvolume
   Capture channels: Mono
   Limits: Capture 0 - 15
   Mono: Capture 15 [100%]
Simple mixer control 'Capture Boost',0
   Capabilities: pswitch pswitch-joined
   Playback channels: Mono
   Mono: Playback [on]
Simple mixer control 'TV Tuner',0
   Capabilities: cswitch cswitch-joined cswitch-exclusive
   Capture exclusive group: 0
   Capture channels: Mono
   Mono: Capture [on]

Recording doesn't generate an error (not sure about device to use):

arecord -D hw:2,1 -f S16_LE -t wav test.wav
Recording WAVE 'test.wav' : Signed 16 bit Little Endian, Rate 8000 Hz, Mono
Warning: rate is not accurate (requested = 8000Hz, got = 119466Hz)
          please, try the plug plugin

However, there is silience in the resultant wav file.

if possible, let me know what direction I should go in to debug this 
further.

Thanks,

John

 > >
 >> > >
 >> > > kernel 2.6.24.2:
 >> > >
 >> > > Apr 14 20:28:38 server kernel: unknown card 0x878-0xaa00:0x1460
 >> > > Apr 14 20:28:38 server kernel: please mail id, board name, and, 
if it
 >> > > works, the correct digital_rate option to 
<alsa-devel@alsa-project.org>
 >> > > Apr 14 20:28:38 server kernel: ACPI: PCI Interrupt 
0000:05:00.1[A] ->
 >> > > GSI 18 (level, low) -> IRQ 18
 >> > > Apr 14 20:28:38 server kernel: bt87x0: Using board 0, analog, 
digital
 >> > > (rate 32000 Hz)
 >> > > Apr 14 20:28:38 server kernel: unknown card 0x878-0xaa01:0x1461
 >> > > Apr 14 20:28:38 server kernel: please mail id, board name, and, 
if it
 >> > > works, the correct digital_rate option to 
<alsa-devel@alsa-project.org>
 >> > > Apr 14 20:28:38 server kernel: ACPI: PCI Interrupt 
0000:05:01.1[A] ->
 >> > > GSI 19 (level, low) -> IRQ 19
 >> > > Apr 14 20:28:38 server kernel: bt87x1: Using board 0, analog, 
digital
 >> > > (rate 32000 Hz)
 >> > > Apr 14 20:28:38 server kernel: unknown card 0x878-0xaa02:0x1462
 >> > > Apr 14 20:28:38 server kernel: please mail id, board name, and, 
if it
 >> > > works, the correct digital_rate option to 
<alsa-devel@alsa-project.org>
 >> > > Apr 14 20:28:38 server kernel: ACPI: PCI Interrupt 
0000:05:02.1[A] ->
 >> > > GSI 16 (level, low) -> IRQ 16
 >> > > Apr 14 20:28:38 server kernel: bt87x2: Using board 0, analog, 
digital
 >> > > (rate 3200
 >> > > 0 Hz)
 >> > > Apr 14 20:28:38 server kernel: unknown card 0x878-0xaa03:0x1463
 >> > > Apr 14 20:28:38 server kernel: please mail id, board name, and, 
if it
 >> > > works, the correct digital_rate option to 
<alsa-devel@alsa-project.org>
 >> > > Apr 14 20:28:38 server kernel: ACPI: PCI Interrupt 
0000:05:03.1[A] ->
 >> > > GSI 17 (level, low) -> IRQ 17
 >> > > Apr 14 20:28:38 server kernel: bt87x3: Using board 0, analog, 
digital
 >> > > (rate 32000 Hz)
 >> > >
 >> > > lspci:
 >> > >
 >> > > 05:00.0 Multimedia video controller: Brooktree Corporation Bt878 
Video
 >> > > Capture (rev 11)
 >> > > 05:00.1 Multimedia controller: Brooktree Corporation Bt878 Audio 
Capture
 >> > > (rev 11)
 >> > > 05:01.0 Multimedia video controller: Brooktree Corporation Bt878 
Video
 >> > > Capture (rev 11)
 >> > > 05:01.1 Multimedia controller: Brooktree Corporation Bt878 Audio 
Capture
 >> > > (rev 11)
 >> > > 05:02.0 Multimedia video controller: Brooktree Corporation Bt878 
Video
 >> > > Capture (rev 11)
 >> > > 05:02.1 Multimedia controller: Brooktree Corporation Bt878 Audio 
Capture
 >> > > (rev 11)
 >> > > 05:03.0 Multimedia video controller: Brooktree Corporation Bt878 
Video
 >> > > Capture (rev 11)
 >> > > 05:03.1 Multimedia controller: Brooktree Corporation Bt878 Audio 
Capture
 >> > > (rev 11)
 >> > >
 >> > > at boot:
 >> > >
 >> > > bttv: driver version 0.9.17 loaded
 >> > > bttv: using 8 buffers with 2080k (520 pages) each for capture
 >> > > bttv: Bt8xx card found (0).
 >> > > ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
 >> > > bttv0: Bt878 (rev 17) at 0000:05:00.0, irq: 18, latency: 64, mmio:
 >> > > 0xdfcfe000
 >> > > bttv0: detected: Provideo PV150A-1 [card=98], PCI subsystem ID 
is aa00:1460
 >> > > bttv0: using: ProVideo PV150 [card=98,autodetected]
 >> > > bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
 >> > > bttv0: tuner absent
 >> > > bttv0: registered device video0
 >> > > bttv0: registered device vbi0
 >> > > bttv0: PLL: 28636363 => 35468950 .. ok
 >> > > bttv: Bt8xx card found (1).
 >> > > ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 19 (level, low) -> IRQ 19
 >> > > bttv1: Bt878 (rev 17) at 0000:05:01.0, irq: 19, latency: 64, mmio:
 >> > > 0xdfcfc000
 >> > > bttv1: detected: Provideo PV150A-2 [card=98], PCI subsystem ID 
is aa01:1461
 >> > > bttv1: using: ProVideo PV150 [card=98,autodetected]
 >> > > bttv1: gpio: en=00000000, out=00000000 in=00ffffff [init]
 >> > > bttv1: tuner absent
 >> > > bttv1: registered device video1
 >> > > bttv1: registered device vbi1
 >> > > bttv1: PLL: 28636363 => 35468950 .. ok
 >> > > bttv: Bt8xx card found (2).
 >> > > ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 16 (level, low) -> IRQ 16
 >> > > bttv2: Bt878 (rev 17) at 0000:05:02.0, irq: 16, latency: 64, mmio:
 >> > > 0xdfcfa000
 >> > > bttv2: detected: Provideo PV150A-3 [card=98], PCI subsystem ID 
is aa02:1462
 >> > > bttv2: using: ProVideo PV150 [card=98,autodetected]
 >> > > bttv2: gpio: en=00000000, out=00000000 in=00ffffff [init]
 >> > > bttv2: tuner absent
 >> > > bttv2: registered device video2
 >> > > bttv2: registered device vbi2
 >> > > bttv2: PLL: 28636363 => 35468950 .. ok
 >> > > bttv: Bt8xx card found (3).
 >> > > ACPI: PCI Interrupt 0000:05:03.0[A] -> GSI 17 (level, low) -> IRQ 17
 >> > > bttv3: Bt878 (rev 17) at 0000:05:03.0, irq: 17, latency: 64, mmio:
 >> > > 0xdfcf8000
 >> > > bttv3: detected: Provideo PV150A-4 [card=98], PCI subsystem ID 
is aa03:1463
 >> > > bttv3: using: ProVideo PV150 [card=98,autodetected]
 >> > > bttv3: gpio: en=00000000, out=00000000 in=00ffffff [init]
 >> > > bttv3: tuner absent
 >> > > bttv3: registered device video3
 >> > > bttv3: registered device vbi3
 >> > > bttv3: PLL: 28636363 => 35468950 .. ok
 >> > >
 >> > >
 >> > > _______________________________________________
 >> > > Alsa-devel mailing list
 >> > > Alsa-devel@alsa-project.org
 >> > > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
 >> > >
 > > _______________________________________________
 > > Alsa-devel mailing list
 > > Alsa-devel@alsa-project.org
 > > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

      reply	other threads:[~2008-05-02 11:38 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-04-15  4:17 Another unknown bt878 John R.
2008-04-17 10:11 ` Takashi Iwai
2008-05-02 11:40   ` John R. [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=481AFDA9.8040000@wowway.com \
    --to=johnr@wowway.com \
    --cc=alsa-devel@alsa-project.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.