* Another unknown bt878 @ 2008-04-15 4:17 John R. 2008-04-17 10:11 ` Takashi Iwai 0 siblings, 1 reply; 3+ messages in thread From: John R. @ 2008-04-15 4:17 UTC (permalink / raw) To: alsa-devel Sound doesn't work on my bt878 based card. Let me know what other information is needed... kernel 2.6.24.2: Apr 14 20:28:38 server kernel: unknown card 0x878-0xaa00:0x1460 Apr 14 20:28:38 server kernel: please mail id, board name, and, if it works, the correct digital_rate option to <alsa-devel@alsa-project.org> Apr 14 20:28:38 server kernel: ACPI: PCI Interrupt 0000:05:00.1[A] -> GSI 18 (level, low) -> IRQ 18 Apr 14 20:28:38 server kernel: bt87x0: Using board 0, analog, digital (rate 32000 Hz) Apr 14 20:28:38 server kernel: unknown card 0x878-0xaa01:0x1461 Apr 14 20:28:38 server kernel: please mail id, board name, and, if it works, the correct digital_rate option to <alsa-devel@alsa-project.org> Apr 14 20:28:38 server kernel: ACPI: PCI Interrupt 0000:05:01.1[A] -> GSI 19 (level, low) -> IRQ 19 Apr 14 20:28:38 server kernel: bt87x1: Using board 0, analog, digital (rate 32000 Hz) Apr 14 20:28:38 server kernel: unknown card 0x878-0xaa02:0x1462 Apr 14 20:28:38 server kernel: please mail id, board name, and, if it works, the correct digital_rate option to <alsa-devel@alsa-project.org> Apr 14 20:28:38 server kernel: ACPI: PCI Interrupt 0000:05:02.1[A] -> GSI 16 (level, low) -> IRQ 16 Apr 14 20:28:38 server kernel: bt87x2: Using board 0, analog, digital (rate 3200 0 Hz) Apr 14 20:28:38 server kernel: unknown card 0x878-0xaa03:0x1463 Apr 14 20:28:38 server kernel: please mail id, board name, and, if it works, the correct digital_rate option to <alsa-devel@alsa-project.org> Apr 14 20:28:38 server kernel: ACPI: PCI Interrupt 0000:05:03.1[A] -> GSI 17 (level, low) -> IRQ 17 Apr 14 20:28:38 server kernel: bt87x3: Using board 0, analog, digital (rate 32000 Hz) lspci: 05:00.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 05:00.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 05:01.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 05:01.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 05:02.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 05:02.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 05:03.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 05:03.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) at boot: bttv: driver version 0.9.17 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18 bttv0: Bt878 (rev 17) at 0000:05:00.0, irq: 18, latency: 64, mmio: 0xdfcfe000 bttv0: detected: Provideo PV150A-1 [card=98], PCI subsystem ID is aa00:1460 bttv0: using: ProVideo PV150 [card=98,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init] bttv0: tuner absent bttv0: registered device video0 bttv0: registered device vbi0 bttv0: PLL: 28636363 => 35468950 .. ok bttv: Bt8xx card found (1). ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 19 (level, low) -> IRQ 19 bttv1: Bt878 (rev 17) at 0000:05:01.0, irq: 19, latency: 64, mmio: 0xdfcfc000 bttv1: detected: Provideo PV150A-2 [card=98], PCI subsystem ID is aa01:1461 bttv1: using: ProVideo PV150 [card=98,autodetected] bttv1: gpio: en=00000000, out=00000000 in=00ffffff [init] bttv1: tuner absent bttv1: registered device video1 bttv1: registered device vbi1 bttv1: PLL: 28636363 => 35468950 .. ok bttv: Bt8xx card found (2). ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 16 (level, low) -> IRQ 16 bttv2: Bt878 (rev 17) at 0000:05:02.0, irq: 16, latency: 64, mmio: 0xdfcfa000 bttv2: detected: Provideo PV150A-3 [card=98], PCI subsystem ID is aa02:1462 bttv2: using: ProVideo PV150 [card=98,autodetected] bttv2: gpio: en=00000000, out=00000000 in=00ffffff [init] bttv2: tuner absent bttv2: registered device video2 bttv2: registered device vbi2 bttv2: PLL: 28636363 => 35468950 .. ok bttv: Bt8xx card found (3). ACPI: PCI Interrupt 0000:05:03.0[A] -> GSI 17 (level, low) -> IRQ 17 bttv3: Bt878 (rev 17) at 0000:05:03.0, irq: 17, latency: 64, mmio: 0xdfcf8000 bttv3: detected: Provideo PV150A-4 [card=98], PCI subsystem ID is aa03:1463 bttv3: using: ProVideo PV150 [card=98,autodetected] bttv3: gpio: en=00000000, out=00000000 in=00ffffff [init] bttv3: tuner absent bttv3: registered device video3 bttv3: registered device vbi3 bttv3: PLL: 28636363 => 35468950 .. ok ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Another unknown bt878 2008-04-15 4:17 Another unknown bt878 John R. @ 2008-04-17 10:11 ` Takashi Iwai 2008-05-02 11:40 ` John R. 0 siblings, 1 reply; 3+ messages in thread From: Takashi Iwai @ 2008-04-17 10:11 UTC (permalink / raw) To: John R.; +Cc: alsa-devel At Mon, 14 Apr 2008 23:17:47 -0500, John R. wrote: > > Sound doesn't work on my bt878 based card. Let me know what other > information is needed... Please elaborate what "sound doesn't work" means? Takashi > > kernel 2.6.24.2: > > Apr 14 20:28:38 server kernel: unknown card 0x878-0xaa00:0x1460 > Apr 14 20:28:38 server kernel: please mail id, board name, and, if it > works, the correct digital_rate option to <alsa-devel@alsa-project.org> > Apr 14 20:28:38 server kernel: ACPI: PCI Interrupt 0000:05:00.1[A] -> > GSI 18 (level, low) -> IRQ 18 > Apr 14 20:28:38 server kernel: bt87x0: Using board 0, analog, digital > (rate 32000 Hz) > Apr 14 20:28:38 server kernel: unknown card 0x878-0xaa01:0x1461 > Apr 14 20:28:38 server kernel: please mail id, board name, and, if it > works, the correct digital_rate option to <alsa-devel@alsa-project.org> > Apr 14 20:28:38 server kernel: ACPI: PCI Interrupt 0000:05:01.1[A] -> > GSI 19 (level, low) -> IRQ 19 > Apr 14 20:28:38 server kernel: bt87x1: Using board 0, analog, digital > (rate 32000 Hz) > Apr 14 20:28:38 server kernel: unknown card 0x878-0xaa02:0x1462 > Apr 14 20:28:38 server kernel: please mail id, board name, and, if it > works, the correct digital_rate option to <alsa-devel@alsa-project.org> > Apr 14 20:28:38 server kernel: ACPI: PCI Interrupt 0000:05:02.1[A] -> > GSI 16 (level, low) -> IRQ 16 > Apr 14 20:28:38 server kernel: bt87x2: Using board 0, analog, digital > (rate 3200 > 0 Hz) > Apr 14 20:28:38 server kernel: unknown card 0x878-0xaa03:0x1463 > Apr 14 20:28:38 server kernel: please mail id, board name, and, if it > works, the correct digital_rate option to <alsa-devel@alsa-project.org> > Apr 14 20:28:38 server kernel: ACPI: PCI Interrupt 0000:05:03.1[A] -> > GSI 17 (level, low) -> IRQ 17 > Apr 14 20:28:38 server kernel: bt87x3: Using board 0, analog, digital > (rate 32000 Hz) > > lspci: > > 05:00.0 Multimedia video controller: Brooktree Corporation Bt878 Video > Capture (rev 11) > 05:00.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture > (rev 11) > 05:01.0 Multimedia video controller: Brooktree Corporation Bt878 Video > Capture (rev 11) > 05:01.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture > (rev 11) > 05:02.0 Multimedia video controller: Brooktree Corporation Bt878 Video > Capture (rev 11) > 05:02.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture > (rev 11) > 05:03.0 Multimedia video controller: Brooktree Corporation Bt878 Video > Capture (rev 11) > 05:03.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture > (rev 11) > > at boot: > > bttv: driver version 0.9.17 loaded > bttv: using 8 buffers with 2080k (520 pages) each for capture > bttv: Bt8xx card found (0). > ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18 > bttv0: Bt878 (rev 17) at 0000:05:00.0, irq: 18, latency: 64, mmio: > 0xdfcfe000 > bttv0: detected: Provideo PV150A-1 [card=98], PCI subsystem ID is aa00:1460 > bttv0: using: ProVideo PV150 [card=98,autodetected] > bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init] > bttv0: tuner absent > bttv0: registered device video0 > bttv0: registered device vbi0 > bttv0: PLL: 28636363 => 35468950 .. ok > bttv: Bt8xx card found (1). > ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 19 (level, low) -> IRQ 19 > bttv1: Bt878 (rev 17) at 0000:05:01.0, irq: 19, latency: 64, mmio: > 0xdfcfc000 > bttv1: detected: Provideo PV150A-2 [card=98], PCI subsystem ID is aa01:1461 > bttv1: using: ProVideo PV150 [card=98,autodetected] > bttv1: gpio: en=00000000, out=00000000 in=00ffffff [init] > bttv1: tuner absent > bttv1: registered device video1 > bttv1: registered device vbi1 > bttv1: PLL: 28636363 => 35468950 .. ok > bttv: Bt8xx card found (2). > ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 16 (level, low) -> IRQ 16 > bttv2: Bt878 (rev 17) at 0000:05:02.0, irq: 16, latency: 64, mmio: > 0xdfcfa000 > bttv2: detected: Provideo PV150A-3 [card=98], PCI subsystem ID is aa02:1462 > bttv2: using: ProVideo PV150 [card=98,autodetected] > bttv2: gpio: en=00000000, out=00000000 in=00ffffff [init] > bttv2: tuner absent > bttv2: registered device video2 > bttv2: registered device vbi2 > bttv2: PLL: 28636363 => 35468950 .. ok > bttv: Bt8xx card found (3). > ACPI: PCI Interrupt 0000:05:03.0[A] -> GSI 17 (level, low) -> IRQ 17 > bttv3: Bt878 (rev 17) at 0000:05:03.0, irq: 17, latency: 64, mmio: > 0xdfcf8000 > bttv3: detected: Provideo PV150A-4 [card=98], PCI subsystem ID is aa03:1463 > bttv3: using: ProVideo PV150 [card=98,autodetected] > bttv3: gpio: en=00000000, out=00000000 in=00ffffff [init] > bttv3: tuner absent > bttv3: registered device video3 > bttv3: registered device vbi3 > bttv3: PLL: 28636363 => 35468950 .. ok > > > _______________________________________________ > Alsa-devel mailing list > Alsa-devel@alsa-project.org > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel > ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Another unknown bt878 2008-04-17 10:11 ` Takashi Iwai @ 2008-05-02 11:40 ` John R. 0 siblings, 0 replies; 3+ messages in thread From: John R. @ 2008-05-02 11:40 UTC (permalink / raw) To: alsa-devel On Thu, Apr 17, 2008 at 12:11:42PM +0200, Takashi Iwai wrote: > > At Mon, 14 Apr 2008 23:17:47 -0500, > > John R. wrote: >> > > >> > > Sound doesn't work on my bt878 based card. Let me know what other >> > > information is needed... > > > > Please elaborate what "sound doesn't work" means? Looks like I don't fully understand how it is not working. I could be pretty far off base with what I am trying... amixer settings for each of the 4 devices that comes up: amixer -c1 Simple mixer control 'FM',0 Capabilities: cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0 Capture channels: Mono Mono: Capture [off] Simple mixer control 'Mic/Line',0 Capabilities: cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0 Capture channels: Mono Mono: Capture [off] Simple mixer control 'Capture',0 Capabilities: cvolume Capture channels: Mono Limits: Capture 0 - 15 Mono: Capture 15 [100%] Simple mixer control 'Capture Boost',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'TV Tuner',0 Capabilities: cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0 Capture channels: Mono Mono: Capture [on] Recording doesn't generate an error (not sure about device to use): arecord -D hw:2,1 -f S16_LE -t wav test.wav Recording WAVE 'test.wav' : Signed 16 bit Little Endian, Rate 8000 Hz, Mono Warning: rate is not accurate (requested = 8000Hz, got = 119466Hz) please, try the plug plugin However, there is silience in the resultant wav file. if possible, let me know what direction I should go in to debug this further. Thanks, John > > >> > > >> > > kernel 2.6.24.2: >> > > >> > > Apr 14 20:28:38 server kernel: unknown card 0x878-0xaa00:0x1460 >> > > Apr 14 20:28:38 server kernel: please mail id, board name, and, if it >> > > works, the correct digital_rate option to <alsa-devel@alsa-project.org> >> > > Apr 14 20:28:38 server kernel: ACPI: PCI Interrupt 0000:05:00.1[A] -> >> > > GSI 18 (level, low) -> IRQ 18 >> > > Apr 14 20:28:38 server kernel: bt87x0: Using board 0, analog, digital >> > > (rate 32000 Hz) >> > > Apr 14 20:28:38 server kernel: unknown card 0x878-0xaa01:0x1461 >> > > Apr 14 20:28:38 server kernel: please mail id, board name, and, if it >> > > works, the correct digital_rate option to <alsa-devel@alsa-project.org> >> > > Apr 14 20:28:38 server kernel: ACPI: PCI Interrupt 0000:05:01.1[A] -> >> > > GSI 19 (level, low) -> IRQ 19 >> > > Apr 14 20:28:38 server kernel: bt87x1: Using board 0, analog, digital >> > > (rate 32000 Hz) >> > > Apr 14 20:28:38 server kernel: unknown card 0x878-0xaa02:0x1462 >> > > Apr 14 20:28:38 server kernel: please mail id, board name, and, if it >> > > works, the correct digital_rate option to <alsa-devel@alsa-project.org> >> > > Apr 14 20:28:38 server kernel: ACPI: PCI Interrupt 0000:05:02.1[A] -> >> > > GSI 16 (level, low) -> IRQ 16 >> > > Apr 14 20:28:38 server kernel: bt87x2: Using board 0, analog, digital >> > > (rate 3200 >> > > 0 Hz) >> > > Apr 14 20:28:38 server kernel: unknown card 0x878-0xaa03:0x1463 >> > > Apr 14 20:28:38 server kernel: please mail id, board name, and, if it >> > > works, the correct digital_rate option to <alsa-devel@alsa-project.org> >> > > Apr 14 20:28:38 server kernel: ACPI: PCI Interrupt 0000:05:03.1[A] -> >> > > GSI 17 (level, low) -> IRQ 17 >> > > Apr 14 20:28:38 server kernel: bt87x3: Using board 0, analog, digital >> > > (rate 32000 Hz) >> > > >> > > lspci: >> > > >> > > 05:00.0 Multimedia video controller: Brooktree Corporation Bt878 Video >> > > Capture (rev 11) >> > > 05:00.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture >> > > (rev 11) >> > > 05:01.0 Multimedia video controller: Brooktree Corporation Bt878 Video >> > > Capture (rev 11) >> > > 05:01.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture >> > > (rev 11) >> > > 05:02.0 Multimedia video controller: Brooktree Corporation Bt878 Video >> > > Capture (rev 11) >> > > 05:02.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture >> > > (rev 11) >> > > 05:03.0 Multimedia video controller: Brooktree Corporation Bt878 Video >> > > Capture (rev 11) >> > > 05:03.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture >> > > (rev 11) >> > > >> > > at boot: >> > > >> > > bttv: driver version 0.9.17 loaded >> > > bttv: using 8 buffers with 2080k (520 pages) each for capture >> > > bttv: Bt8xx card found (0). >> > > ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18 >> > > bttv0: Bt878 (rev 17) at 0000:05:00.0, irq: 18, latency: 64, mmio: >> > > 0xdfcfe000 >> > > bttv0: detected: Provideo PV150A-1 [card=98], PCI subsystem ID is aa00:1460 >> > > bttv0: using: ProVideo PV150 [card=98,autodetected] >> > > bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init] >> > > bttv0: tuner absent >> > > bttv0: registered device video0 >> > > bttv0: registered device vbi0 >> > > bttv0: PLL: 28636363 => 35468950 .. ok >> > > bttv: Bt8xx card found (1). >> > > ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 19 (level, low) -> IRQ 19 >> > > bttv1: Bt878 (rev 17) at 0000:05:01.0, irq: 19, latency: 64, mmio: >> > > 0xdfcfc000 >> > > bttv1: detected: Provideo PV150A-2 [card=98], PCI subsystem ID is aa01:1461 >> > > bttv1: using: ProVideo PV150 [card=98,autodetected] >> > > bttv1: gpio: en=00000000, out=00000000 in=00ffffff [init] >> > > bttv1: tuner absent >> > > bttv1: registered device video1 >> > > bttv1: registered device vbi1 >> > > bttv1: PLL: 28636363 => 35468950 .. ok >> > > bttv: Bt8xx card found (2). >> > > ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 16 (level, low) -> IRQ 16 >> > > bttv2: Bt878 (rev 17) at 0000:05:02.0, irq: 16, latency: 64, mmio: >> > > 0xdfcfa000 >> > > bttv2: detected: Provideo PV150A-3 [card=98], PCI subsystem ID is aa02:1462 >> > > bttv2: using: ProVideo PV150 [card=98,autodetected] >> > > bttv2: gpio: en=00000000, out=00000000 in=00ffffff [init] >> > > bttv2: tuner absent >> > > bttv2: registered device video2 >> > > bttv2: registered device vbi2 >> > > bttv2: PLL: 28636363 => 35468950 .. ok >> > > bttv: Bt8xx card found (3). >> > > ACPI: PCI Interrupt 0000:05:03.0[A] -> GSI 17 (level, low) -> IRQ 17 >> > > bttv3: Bt878 (rev 17) at 0000:05:03.0, irq: 17, latency: 64, mmio: >> > > 0xdfcf8000 >> > > bttv3: detected: Provideo PV150A-4 [card=98], PCI subsystem ID is aa03:1463 >> > > bttv3: using: ProVideo PV150 [card=98,autodetected] >> > > bttv3: gpio: en=00000000, out=00000000 in=00ffffff [init] >> > > bttv3: tuner absent >> > > bttv3: registered device video3 >> > > bttv3: registered device vbi3 >> > > bttv3: PLL: 28636363 => 35468950 .. ok >> > > >> > > >> > > _______________________________________________ >> > > Alsa-devel mailing list >> > > Alsa-devel@alsa-project.org >> > > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel >> > > > > _______________________________________________ > > Alsa-devel mailing list > > Alsa-devel@alsa-project.org > > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2008-05-02 11:38 UTC | newest] Thread overview: 3+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2008-04-15 4:17 Another unknown bt878 John R. 2008-04-17 10:11 ` Takashi Iwai 2008-05-02 11:40 ` John R.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.