From: pjama <pjama@optusnet.com.au>
To: linux-dvb@linuxtv.org
Subject: [linux-dvb] probs with af901x on mythbuntu
Date: Mon, 05 May 2008 12:40:25 +1000 [thread overview]
Message-ID: <481E7399.1040909@optusnet.com.au> (raw)
Hi,
I have a DigitalNow TinyTwin DVB-T Receiver which I believe to be a Afatech 9015 (9013?) TV card on a USB stick. It works just fine in Windoze but I'm trying to get it going in MythBuntu 8.04.
I've compiled and installed the bleeding edge af9015-74e494a9496 drivers from http://linuxtv.org/hg/~anttip/af9015 and dvb-usb-af9015.fw ver 4.95.0 from http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/
however I cant get it to find any TV stations with kaffeine or scan. Kaffiene just doesn't find anything, scan gives me:
peter@SunU20:~$ sudo scan /usr/share/doc/dvb-utils/examples/scan/dvb-t/au-Brisbane
scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/au-Brisbane
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
main:2247: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 16 Device or resource busy
peter@SunU20:~$
Relevant stuff from dmesg
[ 33.795048] input: Afatech DVB-T 2 as /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.1/input/input1
[ 33.807958] input,hidraw0: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:02.1-2
....
[ 6666.511668] af9015_usb_probe: interface:0
[ 6666.513096] af9015_identify_state: reply:02
[ 6666.513101] dvb-usb: found a 'DigitalNow TinyTwin DVB-T Receiver' in warm state.
[ 6666.513517] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 6666.514236] DVB: registering new adapter (DigitalNow TinyTwin DVB-T Receiver)
[ 6666.514982] af9015_eeprom_dump:
[ 6666.546073] 00: 2a 88 9b 0b 00 00 00 00 d3 13 26 32 00 02 01 02
[ 6666.578049] 10: 03 80 00 fa fa 10 40 ef 01 30 31 30 31 30 39 31
[ 6666.610025] 20: 34 30 36 30 30 30 30 31 ff ff ff ff ff ff ff ff
[ 6666.642003] 30: 00 01 3a 01 00 08 02 00 da 11 00 00 1e ff ff ff
[ 6666.673980] 40: ff ff ff ff ff 08 02 00 da 11 00 00 1e ff ff ff
[ 6666.705956] 50: ff ff ff ff ff 24 00 00 04 03 09 04 10 03 41 00
[ 6666.737931] 60: 66 00 61 00 74 00 65 00 63 00 68 00 10 03 44 00
[ 6666.769901] 70: 56 00 42 00 2d 00 54 00 20 00 32 00 20 03 30 00
[ 6666.801885] 80: 31 00 30 00 31 00 30 00 31 00 30 00 31 00 30 00
[ 6666.833861] 90: 36 00 30 00 30 00 30 00 30 00 31 00 00 ff ff ff
[ 6666.865838] a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 6666.897814] b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 6666.929790] c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 6666.961767] d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 6666.993743] e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 6667.025712] f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 6667.027720] af9015_read_config: xtal:2 set adc_clock:28000
[ 6667.031717] af9015_read_config: IF1:4570
[ 6667.035715] af9015_read_config: MT2060 IF1:0
[ 6667.037704] af9015_read_config: tuner id1:30
[ 6667.039708] af9015_read_config: spectral inversion:0
[ 6667.045704] af9013: firmware version:4.73.0
[ 6667.045926] DVB: registering frontend 0 (Afatech AF9013 DVB-T)...
[ 6667.046223] af9015_tuner_attach:
[ 6667.046228] af9015_set_gpio: gpio:1 gpioval:03
[ 6667.087916] mxl500x_attach: Attaching ...
[ 6667.087924] mxl500x_attach: MXL500x tuner succesfully attached
[ 6667.087929] dvb-usb: DigitalNow TinyTwin DVB-T Receiver successfully initialized and connected.
[ 6667.087933] af9015_init:
[ 6667.087936] af9015_init_endpoint: USB speed:3
[ 6667.109656] af9015_download_ir_table:
[ 6667.361511] usbcore: registered new interface driver dvb_usb_af9015
peter@SunU20:~$ sudo lsusb -v
[sudo] password for peter:
Bus 002 Device 002: ID 13d3:3226 IMC Networks
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x13d3 IMC Networks
idProduct 0x3226
bcdDevice 2.00
iManufacturer 1 Afatech
iProduct 2 DVB-T 2
iSerial 3 010101010600001
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 71
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 1 Keyboard
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.01
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 65
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 16
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Any assistance appreciated.
WARNING: I'm not all that familiar with TV cards/sticks in general please write slowly ;)
Peter
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next reply other threads:[~2008-05-05 2:40 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-05 2:40 pjama [this message]
2008-05-05 4:49 ` [linux-dvb] probs with af901x on mythbuntu Bastiaan Wentink
2008-05-05 8:03 ` pjama
2008-05-05 9:06 ` Antti Palosaari
2008-05-05 10:32 ` pjama
2008-05-05 10:52 ` Antti Palosaari
2008-05-05 11:48 ` pjama
2008-05-05 15:48 ` Antti Palosaari
2008-05-11 7:03 ` pjama
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=481E7399.1040909@optusnet.com.au \
--to=pjama@optusnet.com.au \
--cc=linux-dvb@linuxtv.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.