From: Bastiaan Wentink <bastiaan@wentink.de>
To: pjama <pjama@optusnet.com.au>
Cc: linux-dvb@linuxtv.org
Subject: Re: [linux-dvb] probs with af901x on mythbuntu
Date: Mon, 05 May 2008 06:49:28 +0200 [thread overview]
Message-ID: <481E91D8.7010404@wentink.de> (raw)
In-Reply-To: <481E7399.1040909@optusnet.com.au>
Hi :)
have you stopped mythtvbackend?
Command is afaik /etc/init.d/mythtvbackend stop.
I had the same thing with mythbuntu
pjama schrieb:
> Hi,
> I have a DigitalNow TinyTwin DVB-T Receiver which I believe to be a Afatech 9015 (9013?) TV card on a USB stick. It works just fine in Windoze but I'm trying to get it going in MythBuntu 8.04.
>
> I've compiled and installed the bleeding edge af9015-74e494a9496 drivers from http://linuxtv.org/hg/~anttip/af9015 and dvb-usb-af9015.fw ver 4.95.0 from http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/
>
> however I cant get it to find any TV stations with kaffeine or scan. Kaffiene just doesn't find anything, scan gives me:
>
> peter@SunU20:~$ sudo scan /usr/share/doc/dvb-utils/examples/scan/dvb-t/au-Brisbane
> scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/au-Brisbane
> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> main:2247: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 16 Device or resource busy
> peter@SunU20:~$
>
> Relevant stuff from dmesg
>
> [ 33.795048] input: Afatech DVB-T 2 as /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.1/input/input1
> [ 33.807958] input,hidraw0: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:02.1-2
> ....
> [ 6666.511668] af9015_usb_probe: interface:0
> [ 6666.513096] af9015_identify_state: reply:02
> [ 6666.513101] dvb-usb: found a 'DigitalNow TinyTwin DVB-T Receiver' in warm state.
> [ 6666.513517] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
> [ 6666.514236] DVB: registering new adapter (DigitalNow TinyTwin DVB-T Receiver)
> [ 6666.514982] af9015_eeprom_dump:
> [ 6666.546073] 00: 2a 88 9b 0b 00 00 00 00 d3 13 26 32 00 02 01 02
> [ 6666.578049] 10: 03 80 00 fa fa 10 40 ef 01 30 31 30 31 30 39 31
> [ 6666.610025] 20: 34 30 36 30 30 30 30 31 ff ff ff ff ff ff ff ff
> [ 6666.642003] 30: 00 01 3a 01 00 08 02 00 da 11 00 00 1e ff ff ff
> [ 6666.673980] 40: ff ff ff ff ff 08 02 00 da 11 00 00 1e ff ff ff
> [ 6666.705956] 50: ff ff ff ff ff 24 00 00 04 03 09 04 10 03 41 00
> [ 6666.737931] 60: 66 00 61 00 74 00 65 00 63 00 68 00 10 03 44 00
> [ 6666.769901] 70: 56 00 42 00 2d 00 54 00 20 00 32 00 20 03 30 00
> [ 6666.801885] 80: 31 00 30 00 31 00 30 00 31 00 30 00 31 00 30 00
> [ 6666.833861] 90: 36 00 30 00 30 00 30 00 30 00 31 00 00 ff ff ff
> [ 6666.865838] a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> [ 6666.897814] b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> [ 6666.929790] c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> [ 6666.961767] d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> [ 6666.993743] e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> [ 6667.025712] f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> [ 6667.027720] af9015_read_config: xtal:2 set adc_clock:28000
> [ 6667.031717] af9015_read_config: IF1:4570
> [ 6667.035715] af9015_read_config: MT2060 IF1:0
> [ 6667.037704] af9015_read_config: tuner id1:30
> [ 6667.039708] af9015_read_config: spectral inversion:0
> [ 6667.045704] af9013: firmware version:4.73.0
> [ 6667.045926] DVB: registering frontend 0 (Afatech AF9013 DVB-T)...
> [ 6667.046223] af9015_tuner_attach:
> [ 6667.046228] af9015_set_gpio: gpio:1 gpioval:03
> [ 6667.087916] mxl500x_attach: Attaching ...
> [ 6667.087924] mxl500x_attach: MXL500x tuner succesfully attached
> [ 6667.087929] dvb-usb: DigitalNow TinyTwin DVB-T Receiver successfully initialized and connected.
> [ 6667.087933] af9015_init:
> [ 6667.087936] af9015_init_endpoint: USB speed:3
> [ 6667.109656] af9015_download_ir_table:
> [ 6667.361511] usbcore: registered new interface driver dvb_usb_af9015
>
>
> peter@SunU20:~$ sudo lsusb -v
> [sudo] password for peter:
>
> Bus 002 Device 002: ID 13d3:3226 IMC Networks
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 0 (Defined at Interface level)
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> idVendor 0x13d3 IMC Networks
> idProduct 0x3226
> bcdDevice 2.00
> iManufacturer 1 Afatech
> iProduct 2 DVB-T 2
> iSerial 3 010101010600001
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 71
> bNumInterfaces 2
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0x80
> (Bus Powered)
> MaxPower 500mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 4
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 0
> bInterfaceProtocol 0
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x02 EP 2 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x84 EP 4 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x85 EP 5 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 1
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 3 Human Interface Device
> bInterfaceSubClass 0 No Subclass
> bInterfaceProtocol 1 Keyboard
> iInterface 0
> HID Device Descriptor:
> bLength 9
> bDescriptorType 33
> bcdHID 1.01
> bCountryCode 0 Not supported
> bNumDescriptors 1
> bDescriptorType 34 Report
> wDescriptorLength 65
> Report Descriptors:
> ** UNAVAILABLE **
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x83 EP 3 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0040 1x 64 bytes
> bInterval 16
> Device Qualifier (for other device speed):
> bLength 10
> bDescriptorType 6
> bcdUSB 2.00
> bDeviceClass 0 (Defined at Interface level)
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> bNumConfigurations 1
> Device Status: 0x0000
> (Bus Powered)
>
>
> Any assistance appreciated.
>
> WARNING: I'm not all that familiar with TV cards/sticks in general please write slowly ;)
>
> Peter
>
>
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next prev parent reply other threads:[~2008-05-05 4:50 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-05 2:40 [linux-dvb] probs with af901x on mythbuntu pjama
2008-05-05 4:49 ` Bastiaan Wentink [this message]
2008-05-05 8:03 ` pjama
2008-05-05 9:06 ` Antti Palosaari
2008-05-05 10:32 ` pjama
2008-05-05 10:52 ` Antti Palosaari
2008-05-05 11:48 ` pjama
2008-05-05 15:48 ` Antti Palosaari
2008-05-11 7:03 ` pjama
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=481E91D8.7010404@wentink.de \
--to=bastiaan@wentink.de \
--cc=linux-dvb@linuxtv.org \
--cc=pjama@optusnet.com.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.