From: "Raúl Porcel" <armin76@gentoo.org>
To: sparclinux@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [BUG] 2.6.26-rc1 hangs during boot on UltraSPARC 5
Date: Tue, 06 May 2008 13:10:02 +0000 [thread overview]
Message-ID: <482058AA.3050402@gentoo.org> (raw)
In-Reply-To: <20080506.010523.113767579.davem@davemloft.net>
David Miller wrote:
> From: Mikael Pettersson <mikpe@it.uu.se>
> Date: Tue, 6 May 2008 09:54:05 +0200
>
>> OF stdout device is: /pci@1f,0/pci@1,1/SUNW,m64B@2
>> PROM: Built device tree with 46848 bytes of memory.
>> On node 0 totalpages: 32298
>> Normal zone: 335 pages used for memmap
>> Normal zone: 0 pages reserved
>> Normal zone: 31963 pages, LIFO batch:7
>> Movable zone: 0 pages used for memmap
>> Booting Linux...
>> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 31963
>> Kernel command line: ro root=/dev/sda5
>> PID hash table entries: 1024 (order: 10, 8192 bytes)
>> clocksource: mult[28000] shift[16]
>> clockevent: mult[66666666] shift[32]
>> Console: colour dummy device 80x25
>> console handover: boot [earlyprom0] -> real [tty0]
>>
>> *** 2.6.26-rc1 gets as far as the line above, then hangs
>
> It's possible your machine does boot up all the way.
> The video driver simply isn't registerring for whatever
> reason.
>
> Can you ping the box if you wait a minute or two after the
> messages stop?
>
> The only patch to the aty driver since 2.6.25 is the
> following, below, which you can try reverting.
>
> Another thing you can do is edit arch/sparc64/kernel/setup.c
> and in the prom_early_console struct initializer, remove the
> "CON_BOOT" bit from the .flags setting. That will keep the
> PROM console enabled even when another console wants to
> register. We'll get more messages that way.
>
> commit 21b4d1db84a70175251d86078123cc27e46ff69d
> Author: Roel Kluin <12o3l@tiscali.nl>
> Date: Mon Apr 28 02:15:04 2008 -0700
>
> video/aty/atyfb_base.c: free when fb can't be registered
>
> Free buffer when the framebuffer can't be registered
>
> Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
> Cc: "Antonino A. Daplas" <adaplas@pol.net>
> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
>
> diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
> index 62f9c6e..e4bcf53 100644
> --- a/drivers/video/aty/atyfb_base.c
> +++ b/drivers/video/aty/atyfb_base.c
> @@ -2621,10 +2621,13 @@ static int __devinit aty_init(struct fb_info *info)
> #endif /* CONFIG_FB_ATY_CT */
> info->var = var;
>
> - fb_alloc_cmap(&info->cmap, 256, 0);
> + if (fb_alloc_cmap(&info->cmap, 256, 0) < 0)
> + goto aty_init_exit;
>
> - if (register_framebuffer(info) < 0)
> + if (register_framebuffer(info) < 0) {
> + fb_dealloc_cmap(&info->cmap);
> goto aty_init_exit;
> + }
>
> fb_list = info;
>
I've got the same issue on a Sun Blade 1000, doing the CON_BOOT thing
this is what i get, obviously it just hangs and i can't return to OBP.
Allocated 8 Megs of memory at 0x40000000 for kernel
Loaded kernel version 2.6.26
Loading initial ramdisk (755279 bytes at 0x3F800000 phys, 0x40C00000
virt)...
|
[ 0.000000] PROMLIB: Sun IEEE Boot Prom 'OBP 4.16.4 2004/12/18 05:18'
[ 0.000000] PROMLIB: Root node compatible:
[ 0.000000] Linux version 2.6.26-rc1-git3 (root@monchisun) (gcc
version 4.1.2 (Gentoo 4.1.2 p1.08
[ 0.000000] console [earlyprom0] enabled
[ 0.000000] ARCH: SUN4U
[ 0.000000] Kernel: Using 2 locked TLB entries for main kernel image.
[ 0.000000] Remapping the kernel... done.
[ 0.000000] OF stdout device is: /pci@8,700000/ebus@5/serial@1,400000:a
[ 0.000000] PROM: Built device tree with 64227 bytes of memory.
[ 0.000000] Top of RAM: 0x3ff0e000, Total RAM: 0x3fee0000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] [0000000200000000-fffff80000400000] page_structs\x131072
node=0 entry=0/0
[ 0.000000] [0000000200000000-fffff80000800000] page_structs\x131072
node=0 entry=1/0
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0 -> 130951
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0 -> 129023
[ 0.000000] 0: 129024 -> 130914
[ 0.000000] 0: 130916 -> 130928
[ 0.000000] 0: 130944 -> 130946
[ 0.000000] 0: 130950 -> 130951
[ 0.000000] Booting Linux...
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 130033
[ 0.000000] Kernel command line: root=/dev/sda4 doscsi
rdinit=/linuxrc real_root=/dev/sda4
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.004000] clocksource: mult[c80000] shift[16]
[ 0.004000] clockevent: mult[147ae14] shift[32]
[ 0.004000] ------------[ cut here ]------------
[ 0.004000] WARNING: at drivers/cpufreq/cpufreq.c:1391
cpufreq_register_notifier+0x2c/0x74()
[ 0.004000] Modules linked in:
[ 0.004000] Call Trace:
[ 0.004000] [000000000065dd14] cpufreq_register_notifier+0x34/0x74
[ 0.004000] [00000000007f87f8] start_kernel+0x1a0/0x2f0
[ 0.004000] [00000000006d3330] auxio_probe+0x0/0xd0
[ 0.004000] [0000000000000000] 0x8
[ 0.004000] ---[ end trace 139ce121c98e96c9 ]---
[ 0.004089] Console: colour dummy device 80x25
[ 0.011699] Dentry cache hash table entries: 131072 (order: 7,
1048576 bytes)
[ 0.014788] Inode-cache hash table entries: 65536 (order: 6, 524288
bytes)
[ 0.045548] Memory: 1024960k available (2912k kernel code, 1104k
data, 152k init) [fffff80000000]
[ 0.128012] Calibrating delay using timer specific routine.. 10.01
BogoMIPS (lpj 020)
[ 0.136221] Mount-cache hash table entries: 512
[ 0.141496] net_namespace: 344 bytes
[ 0.144700] NET: Registered protocol family 16
[ 0.159101] PCI: Probing for controllers.
[ 0.160130] /pci@8,700000: SCHIZO PCI Bus Module ver[4:0]
[ 0.164024] /pci@8,700000: PCI IO[7ffef000000] MEM[7fe00000000]
[ 0.172817] /pci@8,600000: SCHIZO PCI Bus Module ver[4:0]
[ 0.176023] /pci@8,600000: PCI IO[7ffed000000] MEM[7fd00000000]
[ 0.184840] PCI: Scanning PBM /pci@8,600000
[ 0.188459] PCI: Scanning PBM /pci@8,700000
[ 0.193337] ebus0: [flashprom] [i2c -> (nvram) (idprom) (dimm-fru)
(dimm-fru) (dimm-fru) (dimm-f]
[ 0.302973] SCSI subsystem initialized
[ 0.304403] usbcore: registered new interface driver usbfs
[ 0.308301] usbcore: registered new interface driver hub
[ 0.312205] usbcore: registered new device driver usb
[ 0.344297] /pci@8,700000/ebus@5/rtc@1,300070: Clock regs at
000007fe7e300070
[ 0.349715] NET: Registered protocol family 2
[ 0.388211] IP route cache hash table entries: 8192 (order: 3, 65536
bytes)
[ 0.468847] TCP established hash table entries: 32768 (order: 6,
524288 bytes)
[ 0.557836] TCP bind hash table entries: 32768 (order: 5, 262144 bytes)
[ 0.636590] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.712052] TCP reno registered
[ 0.760209] NET: Registered protocol family 1
[ 0.808403] Unpacking initramfs...<1>Unable to handle kernel paging
request at virtual address 00
[ 0.928065] tsk->{mm,active_mm}->context = 0000000000000000
[ 0.996069] tsk->{mm,active_mm}->pgd = fffff8003f4217d4
[ 1.060074] \|/ ____ \|/
[ 1.060079] "@'/ .. \`@"
[ 1.060082] /_| \__/ |_\
[ 1.060086] \__U_/
[ 1.236087] swapper(1): Oops [#1]
[ 1.276091] TSTATE: 0000000080001606 TPC: 00000000007fad00 TNPC:
00000000007fad04 Y: 00000041 W
[ 1.400109] TPC: <unpack_to_rootfs+0xac/0xa28>
[ 1.452097] g0: 0000000000000001 g1: 0000000000000001 g2:
0000000000000001 g3: 0000000000000000
[ 1.556104] g4: fffff8003e02d860 g5: 0000000000000000 g6:
fffff8003e03c000 g7: 0000000000000000
[ 1.660111] o0: fffff8003e160000 o1: 00000000000000d0 o2:
0000000000000001 o3: 0000000000000001
[ 1.764117] o4: 0000000000000000 o5: 00000000bde9fd0b sp:
fffff8003e03f431 ret_pc: 00000000007fac
[ 1.876125] RPC: <unpack_to_rootfs+0x58/0xa28>
[ 1.928127] l0: 00000000007c2800 l1: 0000000000814400 l2:
0000000000814400 l3: 0000000000000000
[ 2.032134] l4: 0000000000000001 l5: 00000000007e4350 l6:
fffff8003e11a420 l7: 000000000076b360
[ 2.136141] i0: 000000003f800000 i1: 00000000000b864f i2:
0000000000814400 i3: fffff8003e1becc0
[ 2.240147] i4: 00000000000003f7 i5: 00000000007ed400 i6:
fffff8003e03f4f1 i7: 00000000007fb6e0
[ 2.344155] I7: <populate_rootfs+0x64/0xac>
[ 2.396155] Caller[00000000007fb6e0]: populate_rootfs+0x64/0xac
[ 2.466224] Caller[00000000007f819c]: kernel_init+0xac/0x208
[ 2.534229] Caller[0000000000426cf8]: kernel_thread+0x38/0x48
[ 2.602233] Caller[00000000006d1d34]: rest_init+0x18/0x60
[ 2.666238] Instruction DUMP: 03002050 10680243 c07063a0 <c24e0000>
05002051 80a06030 124800
[ 2.796183] Kernel panic - not syncing: Attempted to kill init!
[ 2.864187] Press Stop-A (L1-A) to return to the boot prom
WARNING: multiple messages have this Message-ID (diff)
From: "Raúl Porcel" <armin76@gentoo.org>
To: sparclinux@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [BUG] 2.6.26-rc1 hangs during boot on UltraSPARC 5
Date: Tue, 06 May 2008 15:10:02 +0200 [thread overview]
Message-ID: <482058AA.3050402@gentoo.org> (raw)
In-Reply-To: <20080506.010523.113767579.davem@davemloft.net>
David Miller wrote:
> From: Mikael Pettersson <mikpe@it.uu.se>
> Date: Tue, 6 May 2008 09:54:05 +0200
>
>> OF stdout device is: /pci@1f,0/pci@1,1/SUNW,m64B@2
>> PROM: Built device tree with 46848 bytes of memory.
>> On node 0 totalpages: 32298
>> Normal zone: 335 pages used for memmap
>> Normal zone: 0 pages reserved
>> Normal zone: 31963 pages, LIFO batch:7
>> Movable zone: 0 pages used for memmap
>> Booting Linux...
>> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 31963
>> Kernel command line: ro root=/dev/sda5
>> PID hash table entries: 1024 (order: 10, 8192 bytes)
>> clocksource: mult[28000] shift[16]
>> clockevent: mult[66666666] shift[32]
>> Console: colour dummy device 80x25
>> console handover: boot [earlyprom0] -> real [tty0]
>>
>> *** 2.6.26-rc1 gets as far as the line above, then hangs
>
> It's possible your machine does boot up all the way.
> The video driver simply isn't registerring for whatever
> reason.
>
> Can you ping the box if you wait a minute or two after the
> messages stop?
>
> The only patch to the aty driver since 2.6.25 is the
> following, below, which you can try reverting.
>
> Another thing you can do is edit arch/sparc64/kernel/setup.c
> and in the prom_early_console struct initializer, remove the
> "CON_BOOT" bit from the .flags setting. That will keep the
> PROM console enabled even when another console wants to
> register. We'll get more messages that way.
>
> commit 21b4d1db84a70175251d86078123cc27e46ff69d
> Author: Roel Kluin <12o3l@tiscali.nl>
> Date: Mon Apr 28 02:15:04 2008 -0700
>
> video/aty/atyfb_base.c: free when fb can't be registered
>
> Free buffer when the framebuffer can't be registered
>
> Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
> Cc: "Antonino A. Daplas" <adaplas@pol.net>
> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
>
> diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
> index 62f9c6e..e4bcf53 100644
> --- a/drivers/video/aty/atyfb_base.c
> +++ b/drivers/video/aty/atyfb_base.c
> @@ -2621,10 +2621,13 @@ static int __devinit aty_init(struct fb_info *info)
> #endif /* CONFIG_FB_ATY_CT */
> info->var = var;
>
> - fb_alloc_cmap(&info->cmap, 256, 0);
> + if (fb_alloc_cmap(&info->cmap, 256, 0) < 0)
> + goto aty_init_exit;
>
> - if (register_framebuffer(info) < 0)
> + if (register_framebuffer(info) < 0) {
> + fb_dealloc_cmap(&info->cmap);
> goto aty_init_exit;
> + }
>
> fb_list = info;
>
I've got the same issue on a Sun Blade 1000, doing the CON_BOOT thing
this is what i get, obviously it just hangs and i can't return to OBP.
Allocated 8 Megs of memory at 0x40000000 for kernel
Loaded kernel version 2.6.26
Loading initial ramdisk (755279 bytes at 0x3F800000 phys, 0x40C00000
virt)...
|
[ 0.000000] PROMLIB: Sun IEEE Boot Prom 'OBP 4.16.4 2004/12/18 05:18'
[ 0.000000] PROMLIB: Root node compatible:
[ 0.000000] Linux version 2.6.26-rc1-git3 (root@monchisun) (gcc
version 4.1.2 (Gentoo 4.1.2 p1.08
[ 0.000000] console [earlyprom0] enabled
[ 0.000000] ARCH: SUN4U
[ 0.000000] Kernel: Using 2 locked TLB entries for main kernel image.
[ 0.000000] Remapping the kernel... done.
[ 0.000000] OF stdout device is: /pci@8,700000/ebus@5/serial@1,400000:a
[ 0.000000] PROM: Built device tree with 64227 bytes of memory.
[ 0.000000] Top of RAM: 0x3ff0e000, Total RAM: 0x3fee0000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] [0000000200000000-fffff80000400000] page_structs=131072
node=0 entry=0/0
[ 0.000000] [0000000200000000-fffff80000800000] page_structs=131072
node=0 entry=1/0
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0 -> 130951
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0 -> 129023
[ 0.000000] 0: 129024 -> 130914
[ 0.000000] 0: 130916 -> 130928
[ 0.000000] 0: 130944 -> 130946
[ 0.000000] 0: 130950 -> 130951
[ 0.000000] Booting Linux...
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 130033
[ 0.000000] Kernel command line: root=/dev/sda4 doscsi
rdinit=/linuxrc real_root=/dev/sda4
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.004000] clocksource: mult[c80000] shift[16]
[ 0.004000] clockevent: mult[147ae14] shift[32]
[ 0.004000] ------------[ cut here ]------------
[ 0.004000] WARNING: at drivers/cpufreq/cpufreq.c:1391
cpufreq_register_notifier+0x2c/0x74()
[ 0.004000] Modules linked in:
[ 0.004000] Call Trace:
[ 0.004000] [000000000065dd14] cpufreq_register_notifier+0x34/0x74
[ 0.004000] [00000000007f87f8] start_kernel+0x1a0/0x2f0
[ 0.004000] [00000000006d3330] auxio_probe+0x0/0xd0
[ 0.004000] [0000000000000000] 0x8
[ 0.004000] ---[ end trace 139ce121c98e96c9 ]---
[ 0.004089] Console: colour dummy device 80x25
[ 0.011699] Dentry cache hash table entries: 131072 (order: 7,
1048576 bytes)
[ 0.014788] Inode-cache hash table entries: 65536 (order: 6, 524288
bytes)
[ 0.045548] Memory: 1024960k available (2912k kernel code, 1104k
data, 152k init) [fffff80000000]
[ 0.128012] Calibrating delay using timer specific routine.. 10.01
BogoMIPS (lpj=20020)
[ 0.136221] Mount-cache hash table entries: 512
[ 0.141496] net_namespace: 344 bytes
[ 0.144700] NET: Registered protocol family 16
[ 0.159101] PCI: Probing for controllers.
[ 0.160130] /pci@8,700000: SCHIZO PCI Bus Module ver[4:0]
[ 0.164024] /pci@8,700000: PCI IO[7ffef000000] MEM[7fe00000000]
[ 0.172817] /pci@8,600000: SCHIZO PCI Bus Module ver[4:0]
[ 0.176023] /pci@8,600000: PCI IO[7ffed000000] MEM[7fd00000000]
[ 0.184840] PCI: Scanning PBM /pci@8,600000
[ 0.188459] PCI: Scanning PBM /pci@8,700000
[ 0.193337] ebus0: [flashprom] [i2c -> (nvram) (idprom) (dimm-fru)
(dimm-fru) (dimm-fru) (dimm-f]
[ 0.302973] SCSI subsystem initialized
[ 0.304403] usbcore: registered new interface driver usbfs
[ 0.308301] usbcore: registered new interface driver hub
[ 0.312205] usbcore: registered new device driver usb
[ 0.344297] /pci@8,700000/ebus@5/rtc@1,300070: Clock regs at
000007fe7e300070
[ 0.349715] NET: Registered protocol family 2
[ 0.388211] IP route cache hash table entries: 8192 (order: 3, 65536
bytes)
[ 0.468847] TCP established hash table entries: 32768 (order: 6,
524288 bytes)
[ 0.557836] TCP bind hash table entries: 32768 (order: 5, 262144 bytes)
[ 0.636590] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.712052] TCP reno registered
[ 0.760209] NET: Registered protocol family 1
[ 0.808403] Unpacking initramfs...<1>Unable to handle kernel paging
request at virtual address 00
[ 0.928065] tsk->{mm,active_mm}->context = 0000000000000000
[ 0.996069] tsk->{mm,active_mm}->pgd = fffff8003f4217d4
[ 1.060074] \|/ ____ \|/
[ 1.060079] "@'/ .. \`@"
[ 1.060082] /_| \__/ |_\
[ 1.060086] \__U_/
[ 1.236087] swapper(1): Oops [#1]
[ 1.276091] TSTATE: 0000000080001606 TPC: 00000000007fad00 TNPC:
00000000007fad04 Y: 00000041 W
[ 1.400109] TPC: <unpack_to_rootfs+0xac/0xa28>
[ 1.452097] g0: 0000000000000001 g1: 0000000000000001 g2:
0000000000000001 g3: 0000000000000000
[ 1.556104] g4: fffff8003e02d860 g5: 0000000000000000 g6:
fffff8003e03c000 g7: 0000000000000000
[ 1.660111] o0: fffff8003e160000 o1: 00000000000000d0 o2:
0000000000000001 o3: 0000000000000001
[ 1.764117] o4: 0000000000000000 o5: 00000000bde9fd0b sp:
fffff8003e03f431 ret_pc: 00000000007fac
[ 1.876125] RPC: <unpack_to_rootfs+0x58/0xa28>
[ 1.928127] l0: 00000000007c2800 l1: 0000000000814400 l2:
0000000000814400 l3: 0000000000000000
[ 2.032134] l4: 0000000000000001 l5: 00000000007e4350 l6:
fffff8003e11a420 l7: 000000000076b360
[ 2.136141] i0: 000000003f800000 i1: 00000000000b864f i2:
0000000000814400 i3: fffff8003e1becc0
[ 2.240147] i4: 00000000000003f7 i5: 00000000007ed400 i6:
fffff8003e03f4f1 i7: 00000000007fb6e0
[ 2.344155] I7: <populate_rootfs+0x64/0xac>
[ 2.396155] Caller[00000000007fb6e0]: populate_rootfs+0x64/0xac
[ 2.466224] Caller[00000000007f819c]: kernel_init+0xac/0x208
[ 2.534229] Caller[0000000000426cf8]: kernel_thread+0x38/0x48
[ 2.602233] Caller[00000000006d1d34]: rest_init+0x18/0x60
[ 2.666238] Instruction DUMP: 03002050 10680243 c07063a0 <c24e0000>
05002051 80a06030 124800
[ 2.796183] Kernel panic - not syncing: Attempted to kill init!
[ 2.864187] Press Stop-A (L1-A) to return to the boot prom
next prev parent reply other threads:[~2008-05-06 13:10 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-06 7:54 [BUG] 2.6.26-rc1 hangs during boot on UltraSPARC 5 Mikael Pettersson
2008-05-06 7:54 ` Mikael Pettersson
2008-05-06 8:05 ` David Miller
2008-05-06 8:05 ` David Miller
2008-05-06 13:10 ` Raúl Porcel [this message]
2008-05-06 13:10 ` Raúl Porcel
2008-05-06 19:38 ` Mikael Pettersson
2008-05-06 19:38 ` Mikael Pettersson
2008-05-06 22:20 ` David Miller
2008-05-06 22:20 ` David Miller
2008-05-07 18:23 ` Mikael Pettersson
2008-05-07 18:23 ` Mikael Pettersson
2008-05-08 10:33 ` Raúl Porcel
2008-05-08 10:33 ` Raúl Porcel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=482058AA.3050402@gentoo.org \
--to=armin76@gentoo.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sparclinux@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.