[Xenomai-help] v2.4.3 bug with system() call

[Xenomai-help] v2.4.3 bug with system() call

[Stéphane ANCELOT]

Hi,
Using the v2.4.3 +kernel 2.6.24.7 I used the system("touch /tmp/xxx_ok") 
call   in a non realtime init context.

The task is only used to allocate some memory heaps.

I setted up some memory debugging features in the kernel :
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_SLAB_LEAK=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_VM=y
CONFIG_FORCED_INLINING=y
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_PAGEALLOC=y

 This was not happening with v2.4.2 although that the kernel debugging 
flags were not "on"

here is the bug trace :

------------[ cut here ]------------
kernel BUG at mm/rmap.c:602!
invalid opcode: 0000 [#1] PREEMPT DEBUG_PAGEALLOC
Modules linked in: usb_storage e100 mii

Pid: 1628, comm: creven Not tainted (2.6.24.7-ipipe #3)
EIP: 0060:[<c017fb49>] EFLAGS: 00010246 CPU: 0
EIP is at page_dup_rmap+0x19/0x20
EAX: c115e760 EBX: c115e760 ECX: 08048000 EDX: cc6b1200
ESI: 09cbb025 EDI: 00000025 EBP: 08048000 ESP: cc709ec4
 DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
Process creven (pid: 1628, ti=cc708000 task=cc6f6ac0 task.ti=cc708000)<0>
I-pipe domain Linux
Stack: 08003875 c017ae62 cc6b1200 cd5d9e70 cc6b4e70 cc6fa080 cc650080 
08057000
       08057000 c115e760 cd034120 c9cba120 00000000 00000000 08056fff 
00000000
       00000000 c9c6ec80 cc6b1200 00000000 cc6a6ac0 c0115b90 00000000 
00000000
Call Trace:
 [<c017ae62>] copy_page_range+0x2b2/0x580
 [<c0115b90>] copy_process+0x7a0/0x1000
 [<c01165a7>] do_fork+0x47/0x210
 [<c0100bb6>] sys_clone+0x36/0x40
 [<c0102b89>] syscall_call+0x7/0xb
 =======================
Code: 3b 4b 08 0f 93 c0 85 c0 75 ba 5b 89 c8 c3 8d 74 26 00 53 89 c3 83 
78 08 ff 74 10 f6 40 10 01 74 05 e8 3c f4 ff ff ff 43 08 5b c3 <0f> 0b 
eb fe 8d 76 00 83 ec 1c 89 5c 24 0c 89 c3 89 74 24 10 89
EIP: [<c017fb49>] page_dup_rmap+0x19/0x20 SS:ESP 0068:cc709ec4
---[ end trace b9f3cc48844f8a3b ]---
note: creven[1628] exited with preempt_count 2
BUG: scheduling while atomic: creven/1628/0x00000003
Pid: 1628, comm: creven Tainted: G      D 2.6.24.7-ipipe #3
 [<c036bed3>] schedule+0x283/0x390
 [<c036d525>] rwsem_down_failed_common+0x75/0x190
 [<c013cb10>] handle_edge_irq+0xc0/0x150
 [<c036d68d>] rwsem_down_read_failed+0x1d/0x24
 [<c036d6cb>] call_rwsem_down_read_failed+0x7/0xc
 [<c036cb89>] down_read+0x9/0x10
 [<c0118ed4>] exit_mm+0x24/0xd0
 [<c011a632>] do_exit+0x112/0x800
 [<c010410f>] die+0x21f/0x220
 [<c0104523>] do_invalid_op+0x83/0x90
 [<c017fb49>] page_dup_rmap+0x19/0x20
 [<c0111998>] change_page_attr+0x2c8/0x300
 [<c01119ed>] kernel_map_pages+0x1d/0x60
 [<c0170472>] get_page_from_freelist+0x2c2/0x520
 [<c010e78f>] __ipipe_handle_exception+0x7f/0x1c0
 [<c036db5b>] error_code+0x6f/0x7c
 [<c0170000>] setup_per_zone_pages_min+0x1b0/0x1f0
 [<c017fb49>] page_dup_rmap+0x19/0x20
 [<c017ae62>] copy_page_range+0x2b2/0x580
 [<c0115b90>] copy_process+0x7a0/0x1000
 [<c01165a7>] do_fork+0x47/0x210
 [<c0100bb6>] sys_clone+0x36/0x40
 [<c0102b89>] syscall_call+0x7/0xb
 =======================
Best Regards
Steph

Re: [Xenomai-help] v2.4.3 bug with system() call

[Gilles Chanteperdrix]

On Tue, May 13, 2008 at 3:31 PM, Stéphane ANCELOT <sancelot@domain.hid> wrote:
> Hi,
>  Using the v2.4.3 +kernel 2.6.24.7 I used the system("touch /tmp/xxx_ok")
>  call   in a non realtime init context.
>
>  The task is only used to allocate some memory heaps.
>
>  I setted up some memory debugging features in the kernel :
>  CONFIG_DEBUG_KERNEL=y
>  CONFIG_DEBUG_SLAB=y
>  CONFIG_DEBUG_SLAB_LEAK=y
>  CONFIG_DEBUG_BUGVERBOSE=y
>  CONFIG_DEBUG_VM=y
>  CONFIG_FORCED_INLINING=y
>  CONFIG_EARLY_PRINTK=y
>  CONFIG_DEBUG_PAGEALLOC=y
>
>   This was not happening with v2.4.2 although that the kernel debugging
>  flags were not "on"

It would be nice if you could try the v2.4.2 with debugging options
on, to know if it is a regression or not.

-- 
 Gilles

Re: [Xenomai-help] v2.4.3 bug with system() call

[Jan Kiszka]

Stéphane ANCELOT wrote:
> Hi,
> Using the v2.4.3 +kernel 2.6.24.7 I used the system("touch /tmp/xxx_ok") 
> call   in a non realtime init context.
> 
> The task is only used to allocate some memory heaps.
> 
> I setted up some memory debugging features in the kernel :
> CONFIG_DEBUG_KERNEL=y
> CONFIG_DEBUG_SLAB=y
> CONFIG_DEBUG_SLAB_LEAK=y
> CONFIG_DEBUG_BUGVERBOSE=y
> CONFIG_DEBUG_VM=y
> CONFIG_FORCED_INLINING=y
> CONFIG_EARLY_PRINTK=y
> CONFIG_DEBUG_PAGEALLOC=y
> 
>  This was not happening with v2.4.2 although that the kernel debugging 
> flags were not "on"
> 
> here is the bug trace :
> 
> ------------[ cut here ]------------
> kernel BUG at mm/rmap.c:602!
> invalid opcode: 0000 [#1] PREEMPT DEBUG_PAGEALLOC
> Modules linked in: usb_storage e100 mii
> 
> Pid: 1628, comm: creven Not tainted (2.6.24.7-ipipe #3)
> EIP: 0060:[<c017fb49>] EFLAGS: 00010246 CPU: 0
> EIP is at page_dup_rmap+0x19/0x20
> EAX: c115e760 EBX: c115e760 ECX: 08048000 EDX: cc6b1200
> ESI: 09cbb025 EDI: 00000025 EBP: 08048000 ESP: cc709ec4
>  DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
> Process creven (pid: 1628, ti=cc708000 task=cc6f6ac0 task.ti=cc708000)<0>
> I-pipe domain Linux
> Stack: 08003875 c017ae62 cc6b1200 cd5d9e70 cc6b4e70 cc6fa080 cc650080 
> 08057000
>        08057000 c115e760 cd034120 c9cba120 00000000 00000000 08056fff 
> 00000000
>        00000000 c9c6ec80 cc6b1200 00000000 cc6a6ac0 c0115b90 00000000 
> 00000000
> Call Trace:
>  [<c017ae62>] copy_page_range+0x2b2/0x580
>  [<c0115b90>] copy_process+0x7a0/0x1000
>  [<c01165a7>] do_fork+0x47/0x210
>  [<c0100bb6>] sys_clone+0x36/0x40
>  [<c0102b89>] syscall_call+0x7/0xb
>  =======================
> Code: 3b 4b 08 0f 93 c0 85 c0 75 ba 5b 89 c8 c3 8d 74 26 00 53 89 c3 83 
> 78 08 ff 74 10 f6 40 10 01 74 05 e8 3c f4 ff ff ff 43 08 5b c3 <0f> 0b 
> eb fe 8d 76 00 83 ec 1c 89 5c 24 0c 89 c3 89 74 24 10 89
> EIP: [<c017fb49>] page_dup_rmap+0x19/0x20 SS:ESP 0068:cc709ec4
> ---[ end trace b9f3cc48844f8a3b ]---
> note: creven[1628] exited with preempt_count 2
> BUG: scheduling while atomic: creven/1628/0x00000003
> Pid: 1628, comm: creven Tainted: G      D 2.6.24.7-ipipe #3
>  [<c036bed3>] schedule+0x283/0x390
>  [<c036d525>] rwsem_down_failed_common+0x75/0x190
>  [<c013cb10>] handle_edge_irq+0xc0/0x150
>  [<c036d68d>] rwsem_down_read_failed+0x1d/0x24
>  [<c036d6cb>] call_rwsem_down_read_failed+0x7/0xc
>  [<c036cb89>] down_read+0x9/0x10
>  [<c0118ed4>] exit_mm+0x24/0xd0
>  [<c011a632>] do_exit+0x112/0x800
>  [<c010410f>] die+0x21f/0x220
>  [<c0104523>] do_invalid_op+0x83/0x90
>  [<c017fb49>] page_dup_rmap+0x19/0x20
>  [<c0111998>] change_page_attr+0x2c8/0x300
>  [<c01119ed>] kernel_map_pages+0x1d/0x60
>  [<c0170472>] get_page_from_freelist+0x2c2/0x520
>  [<c010e78f>] __ipipe_handle_exception+0x7f/0x1c0
>  [<c036db5b>] error_code+0x6f/0x7c
>  [<c0170000>] setup_per_zone_pages_min+0x1b0/0x1f0
>  [<c017fb49>] page_dup_rmap+0x19/0x20
>  [<c017ae62>] copy_page_range+0x2b2/0x580
>  [<c0115b90>] copy_process+0x7a0/0x1000
>  [<c01165a7>] do_fork+0x47/0x210
>  [<c0100bb6>] sys_clone+0x36/0x40
>  [<c0102b89>] syscall_call+0x7/0xb
>  =======================

This once fixed it for me, but we still need to take a closer look on
this. Gilles, any news regarding this?

Jan

---
 mm/memory.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Index: b/mm/memory.c
===================================================================
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -502,7 +502,7 @@ copy_one_pte(struct mm_struct *dst_mm, s
 				pte = pte_mkclean(pte);
 			pte = pte_mkold(pte);
 
-			page_dup_rmap(uncow_page, vma, addr);
+			page_add_new_anon_rmap(uncow_page, vma, addr);
 			rss[!!PageAnon(uncow_page)]++;
 			goto out_set_pte;
 		}

-- 
Siemens AG, Corporate Technology, CT SE 2
Corporate Competence Center Embedded Linux

Re: [Xenomai-help] v2.4.3 bug with system() call

[Gilles Chanteperdrix]

On Tue, May 13, 2008 at 4:43 PM, Jan Kiszka <jan.kiszka@domain.hid> wrote:
>
> Stéphane ANCELOT wrote:
>  > Hi,
>  > Using the v2.4.3 +kernel 2.6.24.7 I used the system("touch /tmp/xxx_ok")
>  > call   in a non realtime init context.
>  >
>  > The task is only used to allocate some memory heaps.
>  >
>  > I setted up some memory debugging features in the kernel :
>  > CONFIG_DEBUG_KERNEL=y
>  > CONFIG_DEBUG_SLAB=y
>  > CONFIG_DEBUG_SLAB_LEAK=y
>  > CONFIG_DEBUG_BUGVERBOSE=y
>  > CONFIG_DEBUG_VM=y
>  > CONFIG_FORCED_INLINING=y
>  > CONFIG_EARLY_PRINTK=y
>  > CONFIG_DEBUG_PAGEALLOC=y
>  >
>  >  This was not happening with v2.4.2 although that the kernel debugging
>  > flags were not "on"
>  >
>  > here is the bug trace :
>  >
>  > ------------[ cut here ]------------
>  > kernel BUG at mm/rmap.c:602!
>  > invalid opcode: 0000 [#1] PREEMPT DEBUG_PAGEALLOC
>  > Modules linked in: usb_storage e100 mii
>  >
>  > Pid: 1628, comm: creven Not tainted (2.6.24.7-ipipe #3)
>  > EIP: 0060:[<c017fb49>] EFLAGS: 00010246 CPU: 0
>  > EIP is at page_dup_rmap+0x19/0x20
>  > EAX: c115e760 EBX: c115e760 ECX: 08048000 EDX: cc6b1200
>  > ESI: 09cbb025 EDI: 00000025 EBP: 08048000 ESP: cc709ec4
>  >  DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
>  > Process creven (pid: 1628, ti=cc708000 task=cc6f6ac0 task.ti=cc708000)<0>
>  > I-pipe domain Linux
>  > Stack: 08003875 c017ae62 cc6b1200 cd5d9e70 cc6b4e70 cc6fa080 cc650080
>  > 08057000
>  >        08057000 c115e760 cd034120 c9cba120 00000000 00000000 08056fff
>  > 00000000
>  >        00000000 c9c6ec80 cc6b1200 00000000 cc6a6ac0 c0115b90 00000000
>  > 00000000
>  > Call Trace:
>  >  [<c017ae62>] copy_page_range+0x2b2/0x580
>  >  [<c0115b90>] copy_process+0x7a0/0x1000
>  >  [<c01165a7>] do_fork+0x47/0x210
>  >  [<c0100bb6>] sys_clone+0x36/0x40
>  >  [<c0102b89>] syscall_call+0x7/0xb
>  >  =======================
>  > Code: 3b 4b 08 0f 93 c0 85 c0 75 ba 5b 89 c8 c3 8d 74 26 00 53 89 c3 83
>  > 78 08 ff 74 10 f6 40 10 01 74 05 e8 3c f4 ff ff ff 43 08 5b c3 <0f> 0b
>  > eb fe 8d 76 00 83 ec 1c 89 5c 24 0c 89 c3 89 74 24 10 89
>  > EIP: [<c017fb49>] page_dup_rmap+0x19/0x20 SS:ESP 0068:cc709ec4
>  > ---[ end trace b9f3cc48844f8a3b ]---
>  > note: creven[1628] exited with preempt_count 2
>  > BUG: scheduling while atomic: creven/1628/0x00000003
>  > Pid: 1628, comm: creven Tainted: G      D 2.6.24.7-ipipe #3
>  >  [<c036bed3>] schedule+0x283/0x390
>  >  [<c036d525>] rwsem_down_failed_common+0x75/0x190
>  >  [<c013cb10>] handle_edge_irq+0xc0/0x150
>  >  [<c036d68d>] rwsem_down_read_failed+0x1d/0x24
>  >  [<c036d6cb>] call_rwsem_down_read_failed+0x7/0xc
>  >  [<c036cb89>] down_read+0x9/0x10
>  >  [<c0118ed4>] exit_mm+0x24/0xd0
>  >  [<c011a632>] do_exit+0x112/0x800
>  >  [<c010410f>] die+0x21f/0x220
>  >  [<c0104523>] do_invalid_op+0x83/0x90
>  >  [<c017fb49>] page_dup_rmap+0x19/0x20
>  >  [<c0111998>] change_page_attr+0x2c8/0x300
>  >  [<c01119ed>] kernel_map_pages+0x1d/0x60
>  >  [<c0170472>] get_page_from_freelist+0x2c2/0x520
>  >  [<c010e78f>] __ipipe_handle_exception+0x7f/0x1c0
>  >  [<c036db5b>] error_code+0x6f/0x7c
>  >  [<c0170000>] setup_per_zone_pages_min+0x1b0/0x1f0
>  >  [<c017fb49>] page_dup_rmap+0x19/0x20
>  >  [<c017ae62>] copy_page_range+0x2b2/0x580
>  >  [<c0115b90>] copy_process+0x7a0/0x1000
>  >  [<c01165a7>] do_fork+0x47/0x210
>  >  [<c0100bb6>] sys_clone+0x36/0x40
>  >  [<c0102b89>] syscall_call+0x7/0xb
>  >  =======================
>
>  This once fixed it for me, but we still need to take a closer look on
>  this. Gilles, any news regarding this?

I am ready to test Tomas use case, to see if I can reproduce (and then
hopefully solve) the bug he met. I did not have a look at
page_add_new_anon_rmap yet, so I do not know if it is safe to be
called from copy_page_range.

-- 
 Gilles

Re: [Xenomai-help] v2.4.3 bug with system() call

[Stéphane ANCELOT]

[-- Attachment #1: Type: text/html, Size: 1441 bytes --]

Re: [Xenomai-help] v2.4.3 bug with system() call

[Gilles Chanteperdrix]

On Wed, May 14, 2008 at 10:09 AM, Stéphane ANCELOT <sancelot@domain.hid> wrote:
>
>  Gilles Chanteperdrix a écrit :
>
>  On Tue, May 13, 2008 at 3:31 PM, Stéphane ANCELOT <sancelot@domain.hid> wrote:
>
>
>  Hi,
>  Using the v2.4.3 +kernel 2.6.24.7 I used the system("touch /tmp/xxx_ok")
>  call in a non realtime init context.
>
>  The task is only used to allocate some memory heaps.
>
>  I setted up some memory debugging features in the kernel :
>  CONFIG_DEBUG_KERNEL=y
>  CONFIG_DEBUG_SLAB=y
>  CONFIG_DEBUG_SLAB_LEAK=y
>  CONFIG_DEBUG_BUGVERBOSE=y
>  CONFIG_DEBUG_VM=y
>  CONFIG_FORCED_INLINING=y
>  CONFIG_EARLY_PRINTK=y
>  CONFIG_DEBUG_PAGEALLOC=y
>
>  This was not happening with v2.4.2 although that the kernel debugging
>  flags were not "on"
>
>  It would be nice if you could try the v2.4.2 with debugging options
> on, to know if it is a regression or not.
>
>
>  No time left, going back on v2.4.2. However, I have exactly the same
> problem, if I use the fork() call inside a program.

Have you tried Jan fix ?

-- 
 Gilles

Re: [Xenomai-help] v2.4.3 bug with system() call

[Stéphane ANCELOT]

[-- Attachment #1: Type: text/html, Size: 1854 bytes --]

Re: [Xenomai-help] v2.4.3 bug with system() call (ERRATUM)

[Stéphane ANCELOT]

[-- Attachment #1: Type: text/html, Size: 1794 bytes --]

Re: [Xenomai-help] v2.4.3 bug with system() call (ERRATUM)

[Gilles Chanteperdrix]

On Wed, May 14, 2008 at 2:45 PM, Stéphane ANCELOT <sancelot@domain.hid> wrote:
>
>
>
>  Gilles Chanteperdrix a écrit :
>  On Wed, May 14, 2008 at 10:09 AM, Stéphane ANCELOT <sancelot@domain.hid>
> wrote:
>
>
>  Gilles Chanteperdrix a écrit :
>
>  On Tue, May 13, 2008 at 3:31 PM, Stéphane ANCELOT <sancelot@domain.hid> wrote:
>
>
>  Hi,
>  Using the v2.4.3 +kernel 2.6.24.7 I used the system("touch /tmp/xxx_ok")
>  call in a non realtime init context.
>
>  The task is only used to allocate some memory heaps.
>
>  I setted up some memory debugging features in the kernel :
>  CONFIG_DEBUG_KERNEL=y
>  CONFIG_DEBUG_SLAB=y
>  CONFIG_DEBUG_SLAB_LEAK=y
>  CONFIG_DEBUG_BUGVERBOSE=y
>  CONFIG_DEBUG_VM=y
>  CONFIG_FORCED_INLINING=y
>  CONFIG_EARLY_PRINTK=y
>  CONFIG_DEBUG_PAGEALLOC=y
>
>  This was not happening with v2.4.2 although that the kernel debugging
>  flags were not "on"
>
>  It would be nice if you could try the v2.4.2 with debugging options
> on, to know if it is a regression or not.
>
>
>  No time left, going back on v2.4.2. However, I have exactly the same
> problem, if I use the fork() call inside a program.
>
>  Have you tried Jan fix ?
>
>
>  Sorry, for the last post, I tried again the xeno kernel ...which Jan fix to
> use?

That one:
https://mail.gna.org/public/xenomai-help/2008-05/msg00087.html

-- 
 Gilles

Re: [Xenomai-help] v2.4.3 bug with system() call [FIXED]

[Stéphane ANCELOT]

[-- Attachment #1: Type: text/html, Size: 2184 bytes --]