From: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, linuxppc-dev@ozlabs.org,
paulmck@linux.vnet.ibm.com, davem@davemloft.net,
Balbir Singh <balbir@linux.vnet.ibm.com>
Subject: [BUG] 2.6.26-rc2-mm1 - kernel panic at inet_create() on powerpc
Date: Wed, 14 May 2008 21:04:07 +0530 [thread overview]
Message-ID: <482B066F.4010605@linux.vnet.ibm.com> (raw)
In-Reply-To: <20080514010129.4f672378.akpm@linux-foundation.org>
Hi Andrew,
2.6.26-rc2-mm1 kernel panics on powerpc, while running ltp test over it.
I have attached the gdb output of the pc and lr registers. The patch
list_for_each_rcu-must-die-networking.patch points to changes made
to the same lines listed by the gdb output.
Unable to handle kernel paging request for data at address 0x00000000
Faulting instruction address: 0xc000000000481fa0
cpu 0x0: Vector: 300 (Data Access) at [c0000000eae37900]
pc: c000000000481fa0: .inet_create+0xb4/0x330
lr: c000000000413340: .__sock_create+0x190/0x280
sp: c0000000eae37b80
msr: 8000000000009032
dar: 0
dsisr: 40010000
current = 0xc0000000cd201500
paca = 0xc0000000007c3480
pid = 6462, comm = socket01
enter ? for help
[c0000000eae37c30] c000000000413340 .__sock_create+0x190/0x280
[c0000000eae37cf0] c0000000004137e0 .sys_socket+0x40/0x98
[c0000000eae37d90] c000000000438e18 .compat_sys_socketcall+0xc0/0x234
[c0000000eae37e30] c0000000000086b4 syscall_exit+0x0/0x40
--- Exception: c01 (System Call) at 000000000ff20484
SP (ffc8f770) is in userspace
0xc000000000481fa0 is in inet_create (net/ipv4/af_inet.c:290).
285 /* Look for the requested type/protocol pair. */
286 answer = NULL;
287 lookup_protocol:
288 err = -ESOCKTNOSUPPORT;
289 rcu_read_lock();
290 list_for_each_entry_rcu(answer, &inetsw[sock->type], list) {
291
292 /* Check the non-wild match. */
293 if (protocol == answer->protocol) {
294 if (protocol != IPPROTO_IP)
0xc000000000413340 is in __sock_create (net/socket.c:1171).
1166 goto out_release;
1167
1168 /* Now protected by module ref count */
1169 rcu_read_unlock();
1170
1171 err = pf->create(net, sock, protocol);
1172 if (err < 0)
1173 goto out_module_put;
1174
1175 /*
--
Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.
WARNING: multiple messages have this Message-ID (diff)
From: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, linuxppc-dev@ozlabs.org,
paulmck@linux.vnet.ibm.com, davem@davemloft.net,
Andy Whitcroft <apw@shadowen.org>,
Balbir Singh <balbir@linux.vnet.ibm.com>
Subject: [BUG] 2.6.26-rc2-mm1 - kernel panic at inet_create() on powerpc
Date: Wed, 14 May 2008 21:04:07 +0530 [thread overview]
Message-ID: <482B066F.4010605@linux.vnet.ibm.com> (raw)
In-Reply-To: <20080514010129.4f672378.akpm@linux-foundation.org>
Hi Andrew,
2.6.26-rc2-mm1 kernel panics on powerpc, while running ltp test over it.
I have attached the gdb output of the pc and lr registers. The patch
list_for_each_rcu-must-die-networking.patch points to changes made
to the same lines listed by the gdb output.
Unable to handle kernel paging request for data at address 0x00000000
Faulting instruction address: 0xc000000000481fa0
cpu 0x0: Vector: 300 (Data Access) at [c0000000eae37900]
pc: c000000000481fa0: .inet_create+0xb4/0x330
lr: c000000000413340: .__sock_create+0x190/0x280
sp: c0000000eae37b80
msr: 8000000000009032
dar: 0
dsisr: 40010000
current = 0xc0000000cd201500
paca = 0xc0000000007c3480
pid = 6462, comm = socket01
enter ? for help
[c0000000eae37c30] c000000000413340 .__sock_create+0x190/0x280
[c0000000eae37cf0] c0000000004137e0 .sys_socket+0x40/0x98
[c0000000eae37d90] c000000000438e18 .compat_sys_socketcall+0xc0/0x234
[c0000000eae37e30] c0000000000086b4 syscall_exit+0x0/0x40
--- Exception: c01 (System Call) at 000000000ff20484
SP (ffc8f770) is in userspace
0xc000000000481fa0 is in inet_create (net/ipv4/af_inet.c:290).
285 /* Look for the requested type/protocol pair. */
286 answer = NULL;
287 lookup_protocol:
288 err = -ESOCKTNOSUPPORT;
289 rcu_read_lock();
290 list_for_each_entry_rcu(answer, &inetsw[sock->type], list) {
291
292 /* Check the non-wild match. */
293 if (protocol == answer->protocol) {
294 if (protocol != IPPROTO_IP)
0xc000000000413340 is in __sock_create (net/socket.c:1171).
1166 goto out_release;
1167
1168 /* Now protected by module ref count */
1169 rcu_read_unlock();
1170
1171 err = pf->create(net, sock, protocol);
1172 if (err < 0)
1173 goto out_module_put;
1174
1175 /*
--
Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.
next prev parent reply other threads:[~2008-05-14 15:34 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-14 8:01 2.6.26-rc2-mm1 Andrew Morton
2008-05-14 11:24 ` [BUG] 2.6.26-rc2-mm1 - kernel bug while bootup at __alloc_pages_internal () on x86_64 Kamalesh Babulal
2008-05-14 17:36 ` Andrew Morton
2008-05-14 17:36 ` Andrew Morton
2008-05-14 18:21 ` Kamalesh Babulal
2008-05-14 19:44 ` Andrew Morton
2008-05-14 19:44 ` Andrew Morton
2008-05-15 1:54 ` KAMEZAWA Hiroyuki
2008-05-15 1:54 ` KAMEZAWA Hiroyuki
2008-05-18 8:00 ` Kamalesh Babulal
2008-05-18 8:00 ` Kamalesh Babulal
2008-05-18 17:07 ` KOSAKI Motohiro
2008-05-18 17:07 ` KOSAKI Motohiro
2008-05-19 14:49 ` Lee Schermerhorn
2008-05-19 14:49 ` Lee Schermerhorn
2008-05-14 14:03 ` [BUG] 2.6.26-rc2-mm1 - kernel BUG at fs/reiserfs/journal.c:1414! Kamalesh Babulal
2008-05-14 18:01 ` Andrew Morton
2008-05-14 15:34 ` Kamalesh Babulal [this message]
2008-05-14 15:34 ` [BUG] 2.6.26-rc2-mm1 - kernel panic at inet_create() on powerpc Kamalesh Babulal
2008-05-14 16:07 ` Paul E. McKenney
2008-05-14 16:07 ` Paul E. McKenney
2008-05-14 20:05 ` Alexey Dobriyan
2008-05-14 20:05 ` Alexey Dobriyan
2008-05-14 20:32 ` Paul E. McKenney
2008-05-14 20:32 ` Paul E. McKenney
2008-05-14 18:29 ` 2.6.26-rc2-mm1: sparc64 - possible recursive locking detected Mariusz Kozlowski
2008-05-14 18:41 ` Andrew Morton
2008-05-14 18:50 ` Mariusz Kozlowski
2008-05-14 19:12 ` 2.6.26-rc2-mm1 Torsten Kaiser
2008-05-14 19:35 ` 2.6.26-rc2-mm1 Andrew Morton
2008-05-15 17:44 ` 2.6.26-rc2-mm1 Torsten Kaiser
2008-05-15 18:49 ` 2.6.26-rc2-mm1 Andrew Morton
2008-05-14 20:39 ` 2.6.26-rc2-mm1 (WARN() build error) Randy Dunlap
2008-05-14 20:43 ` 2.6.26-rc2-mm1 (CONFIG_*FD build errors) Randy Dunlap
2008-05-14 20:49 ` 2.6.26-rc2-mm1 Zan Lynx
2008-05-14 21:00 ` 2.6.26-rc2-mm1 Andrew Morton
2008-05-14 21:14 ` 2.6.26-rc2-mm1 me
2008-05-14 22:06 ` 2.6.26-rc2-mm1 Zan Lynx
2008-05-14 21:13 ` 2.6.26-rc2-mm1 (SCSI_DH build errors) Randy Dunlap
2008-05-15 14:46 ` James Bottomley
2008-05-15 19:56 ` Chandra Seetharaman
2008-05-23 3:25 ` Andrew Morton
2008-05-23 19:39 ` Chandra Seetharaman
2008-05-23 20:28 ` Randy Dunlap
2008-05-24 1:16 ` Chandra Seetharaman
2008-05-14 21:16 ` 2.6.26-rc2-mm1: sloooow mkfs.ext2 Alexey Dobriyan
2008-05-14 21:33 ` Alexey Dobriyan
2008-05-15 21:41 ` Jiri Slaby
2008-05-14 21:16 ` 2.6.26-rc2-mm1 (p9 build error when 9P_FS=n) Randy Dunlap
2008-05-15 0:00 ` Eric Van Hensbergen
2008-05-15 0:05 ` Andrew Morton
2008-05-15 2:29 ` Eric Van Hensbergen
2008-05-15 3:04 ` Andrew Morton
2008-05-15 3:53 ` Eric Van Hensbergen
2008-05-14 21:54 ` 2.6.26-rc2-mm1 Rafael J. Wysocki
2008-05-15 17:58 ` [PATCH] Re: 2.6.26-rc2-mm1 - fix parenthesis in include/asm-arm/arch-omap/control.h Mariusz Kozlowski
2008-05-15 17:59 ` [PATCH] Re: 2.6.26-rc2-mm1 - fix parenthesis in include/asm-mips/gic.h Mariusz Kozlowski
2008-05-15 18:01 ` [PATCH] Re: 2.6.26-rc2-mm1 - fix parenthesis in include/asm-mips/mach-au1x00/au1000.h Mariusz Kozlowski
2008-05-15 18:21 ` [BUG] Re: 2.6.26-rc2-mm1 - x86_32 oops on modprobe wusbcore Mariusz Kozlowski
2008-05-15 18:58 ` Andrew Morton
2008-05-15 20:05 ` Inaky Perez-Gonzalez
2008-05-16 22:17 ` 2.6.26-rc2-mm1: high speed something Alexey Dobriyan
2008-05-16 21:31 ` Andrew Morton
2008-05-16 22:00 ` Greg KH
2008-05-17 10:28 ` 2.6.26-rc2-mm1 and Linus -git: LEDS_TRIGGER_DEFAULT_ON odd default Valdis.Kletnieks
2008-05-19 11:33 ` 2.6.26-rc2-mm1 - machine stuck while booting up with CONFIG_FTRACE_STARTUP_TEST enabled Kamalesh Babulal
2008-05-19 13:02 ` Steven Rostedt
2008-05-19 14:08 ` Kamalesh Babulal
2008-05-19 14:38 ` Steven Rostedt
2008-05-20 10:01 ` 2.6.26-rc2-mm1: possible circular locking dependency detected Mariusz Kozlowski
2008-05-20 10:22 ` Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=482B066F.4010605@linux.vnet.ibm.com \
--to=kamalesh@linux.vnet.ibm.com \
--cc=akpm@linux-foundation.org \
--cc=balbir@linux.vnet.ibm.com \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=paulmck@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.