From: Tokunori Ikegami <ikegami.t@gmail.com>
To: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: linux-mtd@lists.infradead.org,
Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>
Subject: Re: [PATCH v6 3/3] mtd: cfi_cmdset_0002: Rename chip_ready variables and add ID definition
Date: Thu, 24 Mar 2022 01:46:00 +0900 [thread overview]
Message-ID: <48459921-b3a4-a399-3a8a-86bd2695a601@gmail.com> (raw)
In-Reply-To: <20220323090257.298130d3@xps13>
Hi Miquel-san,
On 2022/03/23 17:02, Miquel Raynal wrote:
> Hi Tokunori,
>
> ikegami.t@gmail.com wrote on Wed, 23 Mar 2022 08:49:52 +0900:
>
>> The definition is for the S29GL064N model number 01, 02, V1 and V2.
> Please keep resending the entire series.
I see. (In the past it was mentioned as not necessary to send all
patches if a patch fixed of series.)
>
>> Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com>
>> Cc: Miquel Raynal <miquel.raynal@bootlin.com>
>> Cc: Richard Weinberger <richard@nod.at>
>> Cc: Vignesh Raghavendra <vigneshr@ti.com>
>> Cc: linux-mtd@lists.infradead.org
> You don't need all these Cc there, just add them when sending
> everything with git-format-patch. I believe you can use these fields
> just for "extra" people which are not notably expected.
Will do as so. By the way it was commented on the version 1 patch by
Vignesh-san as below so added CC maintainers by version 2 patch.
> Please CC maintainers from
>
> ./scripts/get_maintainer.pl -f drivers/mtd/chips/cfi_cmdset_0002.c
>
> Else, patch would not get attention in time.
>
>> ---
>> drivers/mtd/chips/cfi_cmdset_0002.c | 19 ++++++++++---------
>> 1 file changed, 10 insertions(+), 9 deletions(-)
>>
>> diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
>> index 59334530dd46..67453f59c69c 100644
>> --- a/drivers/mtd/chips/cfi_cmdset_0002.c
>> +++ b/drivers/mtd/chips/cfi_cmdset_0002.c
>> @@ -48,6 +48,7 @@
>> #define SST49LF040B 0x0050
>> #define SST49LF008A 0x005a
>> #define AT49BV6416 0x00d6
>> +#define S29GL064N_MN12 0x0c01
>>
>> /*
>> * Status Register bit description. Used by flash devices that don't
>> @@ -445,7 +446,7 @@ static void fixup_quirks(struct mtd_info *mtd)
>> struct map_info *map = mtd->priv;
>> struct cfi_private *cfi = map->fldrv_priv;
>>
>> - if (cfi->mfr == CFI_MFR_AMD && cfi->id == 0x0c01)
>> + if (cfi->mfr == CFI_MFR_AMD && cfi->id == S29GL064N_MN12)
>> cfi->quirks |= CFI_QUIRK_DQ_TRUE_DATA;
>> }
>>
>> @@ -475,7 +476,7 @@ static struct cfi_fixup cfi_fixup_table[] = {
>> { CFI_MFR_AMD, 0x0056, fixup_use_secsi },
>> { CFI_MFR_AMD, 0x005C, fixup_use_secsi },
>> { CFI_MFR_AMD, 0x005F, fixup_use_secsi },
>> - { CFI_MFR_AMD, 0x0c01, fixup_s29gl064n_sectors },
>> + { CFI_MFR_AMD, S29GL064N_MN12, fixup_s29gl064n_sectors },
>> { CFI_MFR_AMD, 0x1301, fixup_s29gl064n_sectors },
>> { CFI_MFR_AMD, 0x1a00, fixup_s29gl032n_sectors },
>> { CFI_MFR_AMD, 0x1a01, fixup_s29gl032n_sectors },
>> @@ -833,7 +834,7 @@ static int __xipram chip_ready(struct map_info *map, struct flchip *chip,
>> unsigned long addr, map_word *expected)
>> {
>> struct cfi_private *cfi = map->fldrv_priv;
>> - map_word d, t;
>> + map_word oldd, curd;
> All the changes here and below have nothing to do with this commit. You
> can rename variables if you wish, but that is a separate commit.
Okay. (I thought the version 6 3/3 patch followed the comment below.)
> A lot of the diff is just a rename. I am not against a rename if you
> feel it's better, but in this order:
> 1: prepare the fix
> 2: fix
> 3: rename/define id's, whatever
Regards,
Ikegami
>
>> int ret;
>>
>> if (cfi_use_status_reg(cfi)) {
>> @@ -844,20 +845,20 @@ static int __xipram chip_ready(struct map_info *map, struct flchip *chip,
>> */
>> cfi_send_gen_cmd(0x70, cfi->addr_unlock1, chip->start, map, cfi,
>> cfi->device_type, NULL);
>> - t = map_read(map, addr);
>> + curd = map_read(map, addr);
>>
>> - return map_word_andequal(map, t, ready, ready);
>> + return map_word_andequal(map, curd, ready, ready);
>> }
>>
>> - d = map_read(map, addr);
>> - t = map_read(map, addr);
>> + oldd = map_read(map, addr);
>> + curd = map_read(map, addr);
>>
>> - ret = map_word_equal(map, d, t);
>> + ret = map_word_equal(map, oldd, curd);
>>
>> if (!ret || !expected)
>> return ret;
>>
>> - return map_word_equal(map, t, *expected);
>> + return map_word_equal(map, curd, *expected);
>> }
>>
>> static int __xipram chip_good(struct map_info *map, struct flchip *chip,
>
> Thanks,
> Miquèl
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next prev parent reply other threads:[~2022-03-23 16:46 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-22 23:49 [PATCH v6 3/3] mtd: cfi_cmdset_0002: Rename chip_ready variables and add ID definition Tokunori Ikegami
2022-03-23 8:02 ` Miquel Raynal
2022-03-23 16:46 ` Tokunori Ikegami [this message]
2022-03-23 16:53 ` Miquel Raynal
2022-03-23 17:18 ` Tokunori Ikegami
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48459921-b3a4-a399-3a8a-86bd2695a601@gmail.com \
--to=ikegami.t@gmail.com \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.