[lm-sensors] lmsensors on Tyan S2932 with 2x Quadcore-Opteron

[lm-sensors] lmsensors on Tyan S2932 with 2x Quadcore-Opteron

[Daniel Spannbauer]

Hello,

I've installed SuSE 10.2 on a Tyan S2932 with 2 Quadcore-Opterons on it.
Shipped with SuSE was Kernel 2.6.18 and  sensors 2.10.1.

sensors-detect was running, but when I run "sensors" there is the Message:

No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.

According to /etc/sysconfig/lm_sensors the following Modules are loaded:
MODULE_0=i2c-nforce2
MODULE_1=lm85
MODULE_2îprom


Can anybody help me to get sensors working?

Regards

Daniel


_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

Re: [lm-sensors] lmsensors on Tyan S2932 with 2x Quadcore-Opteron

[Juerg Haefliger]

Hi Daniel,


> Hello,
>
> I've installed SuSE 10.2 on a Tyan S2932 with 2 Quadcore-Opterons on it.
> Shipped with SuSE was Kernel 2.6.18 and  sensors 2.10.1.
>
> sensors-detect was running, but when I run "sensors" there is the Message:
>
> No sensors found!
> Make sure you loaded all the kernel drivers you need.
> Try sensors-detect to find out which these are.
>
> According to /etc/sysconfig/lm_sensors the following Modules are loaded:
> MODULE_0=i2c-nforce2
> MODULE_1=lm85
> MODULE_2îprom
>
>
> Can anybody help me to get sensors working?


Upgrade to the latest lm-sensors-3.x, rerun sensors-detect and post
the full output.

...juerg

> Regards
>
> Daniel
>
>
> _______________________________________________
> lm-sensors mailing list
> lm-sensors@lm-sensors.org
> http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
>

_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors