[linux-dvb] pctv452e and TT-S2-3600 step-by-step howto

[linux-dvb] pctv452e and TT-S2-3600 step-by-step howto

[Dominik Kuhlen]

[-- Attachment #1.1.1: Type: text/plain, Size: 87 bytes --]

Hi,

I have attached a step-by-step howto for these devices


Happy testing,
 Dominik


[-- Attachment #1.1.2: howto_pctv452e.txt --]
[-- Type: text/plain, Size: 4137 bytes --]

# 20080607:
# tested with 2.6.23-gentoo-r3 kernel
# need to have a bash (for here-documents)

# 1. Check for old drivers already loaded:
lsmod | grep dvb
# should output nothing
# if it does: do 
# rmmod <modulename>



# =2= dowload, patch, config and build driver
mkdir pctv452e
cd pctv452e

hg clone http://jusst.de/hg/multiproto
wget -O pctv452e.patch.bz2  http://www.linuxtv.org/pipermail/linux-dvb/attachments/20080606/cc54743f/attachment-0001.obj
bunzip2 pctv452e.patch.bz2
patch -p0 < pctv452e.patch
cd multiproto

# create minimal config
# use 'make menuconfig' to add more stuff if you want
cat << EOF > v4l/.config
CONFIG_INPUT=y
CONFIG_USB=y
CONFIG_PARPORT=m
CONFIG_FW_LOADER=m
CONFIG_NET=y
CONFIG_SND_AC97_CODEC=m
CONFIG_I2C=m
CONFIG_STANDALONE=y
CONFIG_SND_MPU401_UART=m
CONFIG_SND=m
CONFIG_MODULES=y
CONFIG_HAS_IOMEM=y
CONFIG_PROC_FS=y
CONFIG_I2C_ALGOBIT=m
CONFIG_INET=y
CONFIG_CRC32=m
CONFIG_FB=y
CONFIG_SYSFS=y
CONFIG_PCI=y
CONFIG_SND_PCM=m
CONFIG_PARPORT_1284=y
CONFIG_EXPERIMENTAL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_DVB_CORE=m
CONFIG_DVB_CAPTURE_DRIVERS=y
CONFIG_DVB_USB=m
CONFIG_DVB_USB_PCTV452E=m
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_LNBP22=m
EOF

make

cd v4l

## verify:
# ls *.ko 
## should list:
## dvb-core.ko  dvb-usb-pctv452e.ko  dvb-usb.ko  lnbp22.ko  stb0899.ko  stb6100.ko

# need to be root at this point
insmod ./dvb-core.ko
insmod ./dvb-usb.ko
insmod ./lnbp22.ko
insmod ./stb0899.ko
insmod ./stb6100.ko
insmod ./dvb-usb-pctv452e.ko

# dmesg should show:
dvb-usb: found a 'PCTV HDTV USB' in warm state.
pctv452e_power_ctrl: 1
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (PCTV HDTV USB)
pctv452e_frontend_attach Enter
stb0899_get_dev_id: Device ID=[3], Release=[0]
stb0899_get_dev_id: Demodulator Core ID=[DMD1], Version=[1]
stb0899_get_dev_id: FEC Core ID=[FEC1], Version=[1]
stb0899_attach: Attaching STB0899
lnbp22_set_voltage: 2 (18V=1 13V=0)
lnbp22_set_voltage: 0x60)
pctv452e_frontend_attach Leave Ok
DVB: registering frontend 0 (STB0899 Multistandard)...
pctv452e_tuner_attach Enter
stb6100_attach: Attaching STB6100
pctv452e_tuner_attach Leave
input: IR-receiver inside an USB DVB receiver as /class/input/input5
dvb-usb: schedule remote query interval to 100 msecs.
pctv452e_power_ctrl: 0
dvb-usb: PCTV HDTV USB successfully initialized and connected.
usbcore: registered new interface driver pctv452e
usbcore: registered new interface driver dvb-usb-tt-connect-s2-3600-01.fw


# you can drop root privileges at this point.

ls -l /dev/dvb/adapter0/
# total 0
# crw-rw---- 1 root video 212, 4 Jun  7 15:37 demux0
# crw-rw---- 1 root video 212, 5 Jun  7 15:37 dvr0
# crw-rw---- 1 root video 212, 3 Jun  7 15:37 frontend0
# crw-rw---- 1 root video 212, 7 Jun  7 15:37 net0


cd ..
cd ..
# you should be in pctv452e dir created above



#
# simpledvbtune:
wget -O simpledvbtune.c.bz2 http://www.linuxtv.org/pipermail/linux-dvb/attachments/20080419/6a41e0b0/attachment-0002.bin
bunzip2  simpledvbtune.c.bz2
gcc -Imultiproto/linux/include simpledvbtune.c -o simpledvbtune

# try it:
./simpledvbtune -f 11954
# hit enter to refresh messages
./simpledvbtune -f 11915 -d 2





############################
# next scan tool:

wget http://jusst.de/manu/scan.tar.bz2

tar xjf scan.tar.bz2
cd scan
rm *.o *.d

# update to most recent API
patch -p0 < ../scan_mp_fix.patch

# build the stuff
make

# start scan:
./scan dvb-s/Astra-19.2E


#
# or do single channel scan with external tuning application (need two terminals for this):
./simpledvbtune -f 11915 -d 2
./scan -c
# output:
#using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
#0x0000 0x0081: pmt_pid 0x0062 PREMIERE -- PREMIERE HD (running, scrambled)
#0x0000 0x0082: pmt_pid 0x0063 PREMIERE -- DISCOVERY HD (running, scrambled)
#0x0000 0x0084: pmt_pid 0x0065 BetaDigital -- ANIXE HD (running)
#0x0000 0x0083: pmt_pid 0x0064 BetaDigital -- ASTRA HD+ (running)
#dumping lists (4 services)
#Done.


[-- Attachment #1.1.3: scan_mp_fix.patch --]
[-- Type: text/x-diff, Size: 2617 bytes --]

--- Makefile	2007-03-30 11:53:05.000000000 +0200
+++ Makefile.my	2008-06-07 15:51:49.000000000 +0200
@@ -14,7 +14,7 @@
 
 removing = atsc_psip_section.c atsc_psip_section.h
 
-CPPFLAGS += -I/usr/include -DDATADIR=\"$(prefix)/share\"
+CPPFLAGS += -I../multiproto/linux/include -DDATADIR=\"$(prefix)/share\"
 
 .PHONY: all
 
@@ -27,8 +27,6 @@
 atsc_psip_section.c atsc_psip_section.h:
 	perl section_generate.pl atsc_psip_section.pl
 
-include ../../Make.rules
-
 install::
 	@echo installing scan files
 	@mkdir -p $(DESTDIR)$(sharedir)/dvb/atsc
--- scan.c	2008-06-07 16:04:49.000000000 +0200
+++ scan.c.my	2008-06-07 16:02:43.000000000 +0200
@@ -1673,38 +1673,22 @@
 		return -1;
 	}
 
-        struct dvbfe_info fe_info1;
-
-        // a temporary hack, need to clean
-        memset(&fe_info1, 0, sizeof (struct dvbfe_info));
-            
-        if(t->modulation_system == 0)
-            fe_info1.delivery = DVBFE_DELSYS_DVBS;
-        else if(t->modulation_system == 1)
-            fe_info1.delivery = DVBFE_DELSYS_DVBS2;
+        enum dvbfe_delsys delsys;           
+        if(t->modulation_system == 0) {
+            delsys = DVBFE_DELSYS_DVBS;info("using DVB-S");}
+        else if(t->modulation_system == 1) {
+            delsys = DVBFE_DELSYS_DVBS2;info("using DVB-S2");}
+        else {
+           info("unsupported modulation system: %d\n", t->modulation_system);
+           return -1;
+        }
             
-        int result = ioctl(frontend_fd, DVBFE_GET_INFO, &fe_info1);
+        int result = ioctl(frontend_fd, DVBFE_SET_DELSYS, &delsys);
         if (result < 0) {
-            perror("ioctl DVBFE_GET_INFO failed");
+            perror("ioctl DVBFE_SET_DELSYS failed");
             t->last_tuning_failed = 1;
             return -1;
         }
-        
-        switch (fe_info1.delivery) {
-            case DVBFE_DELSYS_DVBS:
-                info("----------------------------------> Using '%s' DVB-S\n", fe_info.name);
-                break;
-            case DVBFE_DELSYS_DSS:
-                info("----------------------------------> Using '%s' DSS\n", fe_info.name);
-                break;
-            case DVBFE_DELSYS_DVBS2:
-                info("----------------------------------> Using '%s' DVB-S2\n", fe_info.name);
-                break;
-            default:
-                info("Unsupported Delivery system (%d)!\n", fe_info1.delivery);
-                t->last_tuning_failed = 1;
-                return -1;
-        }
 
 	if (__tune_to_transponder (frontend_fd, t) == 0)
 		return 0;

[-- Attachment #1.2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 197 bytes --]

[-- Attachment #2: Type: text/plain, Size: 150 bytes --]

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] pctv452e and TT-S2-3600 step-by-step howto

[Goga777]

Приветствую, Dominik

>># update to most recent API
>>patch -p0 < ../scan_mp_fix.patch

where from does possible download this patch ?

did you try to use szap2 with this card for dvb-s2 channels ?



-- 
Удачи,
Игорь


_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] pctv452e and TT-S2-3600 step-by-step howto

[Michael Schöller]

[-- Attachment #1.1: Type: text/plain, Size: 1460 bytes --]

Dominik Kuhlen schrieb:
> Hi,
>
> I have attached a step-by-step howto for these devices
>
>
> Happy testing,
>  Dominik
>
>   
> ------------------------------------------------------------------------
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Well bad news...it's not working.
I try to notice any difference in my system to your description and well 
it's not much...
My dmesg line:

stb0899_get_dev_id: Device ID=[3], Release=[1]

Your dmesg line:

stb0899_get_dev_id: Device ID=[3], Release=[0]

all other dmesg messages are identical.

 next difference

ls -l /dev/dvb/adapter0/
# total 0
# crw------- 1 schomi root 212, 4 Jun  7 15:37 demux0
# crw------- 1 schomi root 212, 5 Jun  7 15:37 dvr0
# crw------- 1 schomi root 212, 3 Jun  7 15:37 frontend0
# crw------- 1 schomi root 212, 7 Jun  7 15:37 net0

well just do be sure I also tried chmod a+rw * but that didn't change anything. Well since schomi is my user I think that should be ok...

So now to the real problem...
./simpledvbtune -f 11954
using '/dev/dvb/adapter0/frontend0' as frontend
frontend fd=3: type=0
DVBFE_SET_DELSYS: Invalid argument
ioclt: FE_SET_VOLTAGE : 1
High band
tone: 1
dvbfe setparams :  delsys=1 1354MHz / Rate : 27500kBPS
DVBFE_SET_PARAMS: Invalid argument
tuning qpsk failed

@Dominik
By any chance do you live in austria and can visit me ^^.

Michael



[-- Attachment #1.2: Type: text/html, Size: 2112 bytes --]

[-- Attachment #2: Type: text/plain, Size: 150 bytes --]

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] pctv452e and TT-S2-3600 step-by-step howto

[Dominik Kuhlen]

[-- Attachment #1.1: Type: text/plain, Size: 2056 bytes --]

On Sunday 08 June 2008, Michael Schöller wrote:
> Dominik Kuhlen schrieb:
> > Hi,
> >
> > I have attached a step-by-step howto for these devices
> >
> >
> > Happy testing,
> >  Dominik
> >
> >   
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > linux-dvb mailing list
> > linux-dvb@linuxtv.org
> > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
> Well bad news...it's not working.
> I try to notice any difference in my system to your description and well 
> it's not much...
> My dmesg line:
> 
> stb0899_get_dev_id: Device ID=[3], Release=[1]
> 
> Your dmesg line:
> 
> stb0899_get_dev_id: Device ID=[3], Release=[0]
> 
> all other dmesg messages are identical.
> 
>  next difference
> 
> ls -l /dev/dvb/adapter0/
> # total 0
> # crw------- 1 schomi root 212, 4 Jun  7 15:37 demux0
> # crw------- 1 schomi root 212, 5 Jun  7 15:37 dvr0
> # crw------- 1 schomi root 212, 3 Jun  7 15:37 frontend0
> # crw------- 1 schomi root 212, 7 Jun  7 15:37 net0
> 
> well just do be sure I also tried chmod a+rw * but that didn't change anything. Well since schomi is my user I think that should be ok...
> 
> So now to the real problem...
> ./simpledvbtune -f 11954
> using '/dev/dvb/adapter0/frontend0' as frontend
> frontend fd=3: type=0
> DVBFE_SET_DELSYS: Invalid argument
> ioclt: FE_SET_VOLTAGE : 1
> High band
> tone: 1
> dvbfe setparams :  delsys=1 1354MHz / Rate : 27500kBPS
> DVBFE_SET_PARAMS: Invalid argument
> tuning qpsk failed
Hmm, this is strange. looks like you are using old drivers or old dvb-core module that doesn't support the new ioctls
Did you load the modules with
insmod ./dvb-core.ko
insmod ./dvb-usb.ko
insmod ./lnbp22.ko
insmod ./stb0899.ko
insmod ./stb6100.ko
insmod ./dvb-usb-pctv452e.ko
to be sure that no old/other modules were used?

> 
> @Dominik
> By any chance do you live in austria and can visit me ^^.
No, sorry I don't.
> 
> Michael
> 
> 
> 

Dominik


[-- Attachment #1.2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 197 bytes --]

[-- Attachment #2: Type: text/plain, Size: 150 bytes --]

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] pctv452e and TT-S2-3600 step-by-step howto

[Michael Schöller]

[-- Attachment #1.1: Type: text/plain, Size: 803 bytes --]

Dominik Kuhlen schrieb:
> Hmm, this is strange. looks like you are using old drivers or old 
> dvb-core module that doesn't support the new ioctls
> Did you load the modules with
> insmod ./dvb-core.ko
> insmod ./dvb-usb.ko
> insmod ./lnbp22.ko
> insmod ./stb0899.ko
> insmod ./stb6100.ko
> insmod ./dvb-usb-pctv452e.ko
> to be sure that no old/other modules were used?
>
>   

Yes, I did as described. I also checked if no old modules are loaded. 
Just do be sure I downloaded the newest kernel from the PS3-kernel tree 
and compiled it before following the step by step how to.

However the error is still the same.
Well I try a shoot into the blue and say this is a compatibility problem 
of the code with the ppc architecture. Since this is the only 
significant difference I can think of.

Michael

[-- Attachment #1.2: Type: text/html, Size: 1137 bytes --]

[-- Attachment #2: Type: text/plain, Size: 150 bytes --]

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] pctv452e and TT-S2-3600 step-by-step howto

[Michael Schöller]

[-- Attachment #1.1: Type: text/plain, Size: 1803 bytes --]

I did an other test and compiled an new kernel Version 2.6.26-rc5 from 
the ps3 kernel tree and disabled all video 4 linux and dvb support in 
the kernel. After that I dried that step by step howto again. With the 
same result. So I was thinking maybe thats exactly the wrong way and 
someone is missing...are there any optins in the "Device 
Driver->multimedia device" tabs that must be enabled so that the hole 
stuff works.

BTW I noticed an really odd message when compiling multiproto drivers. I 
don't know remember exactly but It goes something like "VIDEO PLANB: 
need at leas kernel version 2.6.99".

I hope someone can finally help me.

Michael

Michael Schöller schrieb:
> Dominik Kuhlen schrieb:
>> Hmm, this is strange. looks like you are using old drivers or old 
>> dvb-core module that doesn't support the new ioctls
>> Did you load the modules with
>> insmod ./dvb-core.ko
>> insmod ./dvb-usb.ko
>> insmod ./lnbp22.ko
>> insmod ./stb0899.ko
>> insmod ./stb6100.ko
>> insmod ./dvb-usb-pctv452e.ko
>> to be sure that no old/other modules were used?
>>
>>   
>
> Yes, I did as described. I also checked if no old modules are loaded. 
> Just do be sure I downloaded the newest kernel from the PS3-kernel 
> tree and compiled it before following the step by step how to.
>
> However the error is still the same.
> Well I try a shoot into the blue and say this is a compatibility 
> problem of the code with the ppc architecture. Since this is the only 
> significant difference I can think of.
>
> Michael
> ------------------------------------------------------------------------
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb


[-- Attachment #1.2: Type: text/html, Size: 2484 bytes --]

[-- Attachment #2: Type: text/plain, Size: 150 bytes --]

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[linux-dvb] pctv452e + PS3 + PPC Linux(YDL, Fedora)

[Michael Schöller]

Well I just want to point out that my hole Problem with the pctv452e 
still exists.

Maybe after one month there is a solution now?

An exact problem description is found here
http://www.linuxtv.org/pipermail/linux-dvb/2008-June/026824.html
and
http://www.linuxtv.org/pipermail/linux-dvb/2008-June/026495.html
and
http://www.linuxtv.org/pipermail/linux-dvb/2008-June/026823.html

Michael

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] pctv452e and TT-S2-3600 step-by-step howto

[Michael Schöller]

[-- Attachment #1.1: Type: text/plain, Size: 3272 bytes --]

Maybe this is an hint that will enable you to find the problem. I just 
looked at the dmesg messages right after I tried ./simpledvbtune -f 
11954 and well this are the messages:

pctv452e_power_ctrl: 1
ioctl32(simpledvbtune:5591): Unknown cmd fd(3) cmd(80046f57){t:'o';sz:4} 
arg(ff8c43e8) on /dev/dvb/adapter0/frontend0
lnbp22_set_voltage: 1 (18V=1 13V=0)
lnbp22_set_voltage: 0x72)
ioctl32(simpledvbtune:5591): Unknown cmd fd(3) 
cmd(80ac6f53){t:'o';sz:172} arg(ff8c433c) on /dev/dvb/adapter0/frontend0
lnbp22_set_voltage: 2 (18V=1 13V=0)
lnbp22_set_voltage: 0x60)
pctv452e_power_ctrl: 0

Maybe that helps..
Oh I almost forgot. The leds on the Receiver. After loading the kernel 
modules they go from orange to green. After trying simpledvbtune they go 
from green to orange and never back.

Michael

Dominik Kuhlen schrieb:
> On Sunday 08 June 2008, Michael Schöller wrote:
>   
>> Dominik Kuhlen schrieb:
>>     
>>> Hi,
>>>
>>> I have attached a step-by-step howto for these devices
>>>
>>>
>>> Happy testing,
>>>  Dominik
>>>
>>>   
>>> ------------------------------------------------------------------------
>>>
>>> _______________________________________________
>>> linux-dvb mailing list
>>> linux-dvb@linuxtv.org
>>> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>>>       
>> Well bad news...it's not working.
>> I try to notice any difference in my system to your description and well 
>> it's not much...
>> My dmesg line:
>>
>> stb0899_get_dev_id: Device ID=[3], Release=[1]
>>
>> Your dmesg line:
>>
>> stb0899_get_dev_id: Device ID=[3], Release=[0]
>>
>> all other dmesg messages are identical.
>>
>>  next difference
>>
>> ls -l /dev/dvb/adapter0/
>> # total 0
>> # crw------- 1 schomi root 212, 4 Jun  7 15:37 demux0
>> # crw------- 1 schomi root 212, 5 Jun  7 15:37 dvr0
>> # crw------- 1 schomi root 212, 3 Jun  7 15:37 frontend0
>> # crw------- 1 schomi root 212, 7 Jun  7 15:37 net0
>>
>> well just do be sure I also tried chmod a+rw * but that didn't change anything. Well since schomi is my user I think that should be ok...
>>
>> So now to the real problem...
>> ./simpledvbtune -f 11954
>> using '/dev/dvb/adapter0/frontend0' as frontend
>> frontend fd=3: type=0
>> DVBFE_SET_DELSYS: Invalid argument
>> ioclt: FE_SET_VOLTAGE : 1
>> High band
>> tone: 1
>> dvbfe setparams :  delsys=1 1354MHz / Rate : 27500kBPS
>> DVBFE_SET_PARAMS: Invalid argument
>> tuning qpsk failed
>>     
> Hmm, this is strange. looks like you are using old drivers or old dvb-core module that doesn't support the new ioctls
> Did you load the modules with
> insmod ./dvb-core.ko
> insmod ./dvb-usb.ko
> insmod ./lnbp22.ko
> insmod ./stb0899.ko
> insmod ./stb6100.ko
> insmod ./dvb-usb-pctv452e.ko
> to be sure that no old/other modules were used?
>
>   
>> @Dominik
>> By any chance do you live in austria and can visit me ^^.
>>     
> No, sorry I don't.
>   
>> Michael
>>
>>
>>
>>     
>
> Dominik
>
>   
> ------------------------------------------------------------------------
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb


[-- Attachment #1.2: Type: text/html, Size: 4171 bytes --]

[-- Attachment #2: Type: text/plain, Size: 150 bytes --]

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb