From: Jeff Garzik <jgarzik@pobox.com>
To: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Cc: netdev@vger.kernel.org, linuxppc-dev@ozlabs.org
Subject: Re: [PATCH] ibm_emac: Remove the ibm_emac driver
Date: Tue, 17 Jun 2008 23:30:56 -0400 [thread overview]
Message-ID: <48588170.3010303@pobox.com> (raw)
In-Reply-To: <20080617193523.028d4cc2@zod.rchland.ibm.com>
Josh Boyer wrote:
> The arch/ppc sub-tree has been removed in the powerpc git tree. The old
> ibm_emac driver is no longer used by anything as a result of this. This
> removes it, leaving the ibm_newemac driver as the proper driver to use for
> PowerPC boards with the EMAC hardware.
>
> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
> ---
> MAINTAINERS | 8 -
> drivers/net/Kconfig | 1 -
> drivers/net/ibm_emac/Kconfig | 70 -
> drivers/net/ibm_emac/Makefile | 11 -
> drivers/net/ibm_emac/ibm_emac.h | 329 -----
> drivers/net/ibm_emac/ibm_emac_core.c | 2263 ---------------------------------
> drivers/net/ibm_emac/ibm_emac_core.h | 222 ----
> drivers/net/ibm_emac/ibm_emac_debug.c | 211 ---
> drivers/net/ibm_emac/ibm_emac_debug.h | 62 -
> drivers/net/ibm_emac/ibm_emac_mal.c | 570 ---------
> drivers/net/ibm_emac/ibm_emac_mal.h | 267 ----
> drivers/net/ibm_emac/ibm_emac_phy.c | 398 ------
> drivers/net/ibm_emac/ibm_emac_phy.h | 80 --
> drivers/net/ibm_emac/ibm_emac_rgmii.c | 200 ---
> drivers/net/ibm_emac/ibm_emac_rgmii.h | 64 -
> drivers/net/ibm_emac/ibm_emac_tah.c | 110 --
> drivers/net/ibm_emac/ibm_emac_tah.h | 87 --
> drivers/net/ibm_emac/ibm_emac_zmii.c | 253 ----
> drivers/net/ibm_emac/ibm_emac_zmii.h | 82 --
> 19 files changed, 0 insertions(+), 5288 deletions(-)
> delete mode 100644 drivers/net/ibm_emac/Kconfig
> delete mode 100644 drivers/net/ibm_emac/Makefile
> delete mode 100644 drivers/net/ibm_emac/ibm_emac.h
> delete mode 100644 drivers/net/ibm_emac/ibm_emac_core.c
> delete mode 100644 drivers/net/ibm_emac/ibm_emac_core.h
> delete mode 100644 drivers/net/ibm_emac/ibm_emac_debug.c
> delete mode 100644 drivers/net/ibm_emac/ibm_emac_debug.h
> delete mode 100644 drivers/net/ibm_emac/ibm_emac_mal.c
> delete mode 100644 drivers/net/ibm_emac/ibm_emac_mal.h
> delete mode 100644 drivers/net/ibm_emac/ibm_emac_phy.c
> delete mode 100644 drivers/net/ibm_emac/ibm_emac_phy.h
> delete mode 100644 drivers/net/ibm_emac/ibm_emac_rgmii.c
> delete mode 100644 drivers/net/ibm_emac/ibm_emac_rgmii.h
> delete mode 100644 drivers/net/ibm_emac/ibm_emac_tah.c
> delete mode 100644 drivers/net/ibm_emac/ibm_emac_tah.h
> delete mode 100644 drivers/net/ibm_emac/ibm_emac_zmii.c
> delete mode 100644 drivers/net/ibm_emac/ibm_emac_zmii.h
applied
WARNING: multiple messages have this Message-ID (diff)
From: Jeff Garzik <jgarzik@pobox.com>
To: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Cc: ebs@ebshome.net, netdev@vger.kernel.org, linuxppc-dev@ozlabs.org
Subject: Re: [PATCH] ibm_emac: Remove the ibm_emac driver
Date: Tue, 17 Jun 2008 23:30:56 -0400 [thread overview]
Message-ID: <48588170.3010303@pobox.com> (raw)
In-Reply-To: <20080617193523.028d4cc2@zod.rchland.ibm.com>
Josh Boyer wrote:
> The arch/ppc sub-tree has been removed in the powerpc git tree. The old
> ibm_emac driver is no longer used by anything as a result of this. This
> removes it, leaving the ibm_newemac driver as the proper driver to use for
> PowerPC boards with the EMAC hardware.
>
> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
> ---
> MAINTAINERS | 8 -
> drivers/net/Kconfig | 1 -
> drivers/net/ibm_emac/Kconfig | 70 -
> drivers/net/ibm_emac/Makefile | 11 -
> drivers/net/ibm_emac/ibm_emac.h | 329 -----
> drivers/net/ibm_emac/ibm_emac_core.c | 2263 ---------------------------------
> drivers/net/ibm_emac/ibm_emac_core.h | 222 ----
> drivers/net/ibm_emac/ibm_emac_debug.c | 211 ---
> drivers/net/ibm_emac/ibm_emac_debug.h | 62 -
> drivers/net/ibm_emac/ibm_emac_mal.c | 570 ---------
> drivers/net/ibm_emac/ibm_emac_mal.h | 267 ----
> drivers/net/ibm_emac/ibm_emac_phy.c | 398 ------
> drivers/net/ibm_emac/ibm_emac_phy.h | 80 --
> drivers/net/ibm_emac/ibm_emac_rgmii.c | 200 ---
> drivers/net/ibm_emac/ibm_emac_rgmii.h | 64 -
> drivers/net/ibm_emac/ibm_emac_tah.c | 110 --
> drivers/net/ibm_emac/ibm_emac_tah.h | 87 --
> drivers/net/ibm_emac/ibm_emac_zmii.c | 253 ----
> drivers/net/ibm_emac/ibm_emac_zmii.h | 82 --
> 19 files changed, 0 insertions(+), 5288 deletions(-)
> delete mode 100644 drivers/net/ibm_emac/Kconfig
> delete mode 100644 drivers/net/ibm_emac/Makefile
> delete mode 100644 drivers/net/ibm_emac/ibm_emac.h
> delete mode 100644 drivers/net/ibm_emac/ibm_emac_core.c
> delete mode 100644 drivers/net/ibm_emac/ibm_emac_core.h
> delete mode 100644 drivers/net/ibm_emac/ibm_emac_debug.c
> delete mode 100644 drivers/net/ibm_emac/ibm_emac_debug.h
> delete mode 100644 drivers/net/ibm_emac/ibm_emac_mal.c
> delete mode 100644 drivers/net/ibm_emac/ibm_emac_mal.h
> delete mode 100644 drivers/net/ibm_emac/ibm_emac_phy.c
> delete mode 100644 drivers/net/ibm_emac/ibm_emac_phy.h
> delete mode 100644 drivers/net/ibm_emac/ibm_emac_rgmii.c
> delete mode 100644 drivers/net/ibm_emac/ibm_emac_rgmii.h
> delete mode 100644 drivers/net/ibm_emac/ibm_emac_tah.c
> delete mode 100644 drivers/net/ibm_emac/ibm_emac_tah.h
> delete mode 100644 drivers/net/ibm_emac/ibm_emac_zmii.c
> delete mode 100644 drivers/net/ibm_emac/ibm_emac_zmii.h
applied
next prev parent reply other threads:[~2008-06-18 3:31 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-17 23:35 [PATCH] ibm_emac: Remove the ibm_emac driver Josh Boyer
2008-06-18 0:11 ` Sean MacLennan
2008-06-18 0:34 ` Benjamin Herrenschmidt
2008-06-18 0:39 ` Josh Boyer
2008-06-18 0:39 ` Josh Boyer
2008-06-18 1:57 ` Eugene Surovegin
2008-06-18 1:57 ` Eugene Surovegin
2008-06-18 3:30 ` Jeff Garzik [this message]
2008-06-18 3:30 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48588170.3010303@pobox.com \
--to=jgarzik@pobox.com \
--cc=jwboyer@linux.vnet.ibm.com \
--cc=linuxppc-dev@ozlabs.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.