[Xenomai-help] Problem using xenomai threads with eclipse

[Xenomai-help] Problem using xenomai threads with eclipse

[Laurent.POYART]

Hi,

I'm compiling a xenomai user land application using eclipse CDT 3.2.2  and
my Pc hangs when I run it using debug (gbd). 

Context:

Linux kernel : 2.6.23
Xenomai : 2.4.1
Architecture: Pentium Dual Core (PC).
Xenomai Configuration : priority coupling.
Linker options: -Wl,--wrap,pthread_create -Wl,-soname=pthread_rt
(only pthread_create is wrapped)

The application code is the following (the problem is described after the
source code):

#include<iostream>
#include<cassert>
using namespace std;

#include <sys/mman.h>
#include <pthread.h>
#include <semaphore.h>
#include <mqueue.h>
#include <errno.h>

// Lock used to make the thread wait for start enable
sem_t s_SemThreadStartEnable;

// For Test
sem_t s_SemThreadTest;
 
// Thread function for the Xenomai RT Thread 
void* mythreadfunctionrt(void* arg)
{
	// Wait start Enable (not wrapped => linux syscall)
    int result = sem_wait(&s_SemThreadStartEnable);
    assert(result == 0);

    // Enter Thread Loop
	while(1)
	{
		// Wait for lock test (is not available => must preempt the
thread)
		result = sem_wait(&s_SemThreadTest);
		assert(result == 0);
		
		// Never reach this point because lock is never released
	}	   
		
	return(0);	
}

// Thread function for the linux Thread (not RT)
void* mythreadfunction(void* arg)
{
	mq_attr mqAttributs;
	mqAttributs.mq_flags = 0;
	mqAttributs.mq_maxmsg = 1; 
	mqAttributs.mq_msgsize =  sizeof(void*);	
	mqAttributs.mq_curmsgs = 0;
	// generates name
	mqd_t handle = mq_open("/OEmqTest",(O_RDWR | O_CREAT),(S_IRWXU |
S_IRWXG),&mqAttributs);
	assert(handle >= 0);
	
	while(1)
	{
		 // Pend on the message queue (message is a pointer size =
sizeof(void*))		
		 char* pt_obj = 0;
		 cout << "block on mqueue reception" << endl;
		 int result =
mq_receive(handle,(char*)&pt_obj,sizeof(void*),0);
		 assert(result == 0);
	}	   
		
	return(0);	
}

// ================================================================
// Function   : AppStartTask
// Goal    : Application Start Task
// ================================================================
void*  AppStartTask(void *p_arg)
{
    // ================  LINUX THREAD (NOT RT) ====================
    // ================  REAL TIME PRIORITY => 12 / SCHED FIFO ==========
	 cout << "Create Linux Thread" << endl;	
    // Thread Attributs Init
	pthread_t mythread;
	pthread_attr_t threadAttributs;
	int result = pthread_attr_init(&threadAttributs);	
	assert(result == 0);
	struct sched_param  scheduleParams;
	scheduleParams.sched_priority = 12;
	result =
pthread_attr_setschedparam(&threadAttributs,&scheduleParams);
	assert(result == 0);
	pthread_attr_setschedpolicy (&threadAttributs,SCHED_FIFO);
	assert(result == 0);
	pthread_attr_setinheritsched
(&threadAttributs,PTHREAD_EXPLICIT_SCHED);
	assert(result == 0);
    result = __real_pthread_create(&mythread,
    							&threadAttributs,
    							mythreadfunction,
    							0);
    assert(result == 0);

    // Lock that enable RT thread loop
    sem_init(&s_SemThreadStartEnable,false,0);		// not available

    // Test Lock
    sem_init(&s_SemThreadTest,false,0);				// not
available
    
    // ================  XENOMAI THREAD  ====================
    // =======  REAL TIME PRIORITY => 11 / SCHED FIFO =======
	 cout << "Create Xenomai Thread" << endl;    
    pthread_t mythreadrt;//
	pthread_attr_t threadAttributsrt;
	int resultrt = pthread_attr_init(&threadAttributsrt);
	assert(resultrt == 0);
	struct sched_param  scheduleParamsrt;
	scheduleParamsrt.sched_priority = 11;
	resultrt =
pthread_attr_setschedparam(&threadAttributsrt,&scheduleParamsrt);
	assert(resultrt == 0);
	result = pthread_attr_setschedpolicy
(&threadAttributsrt,SCHED_FIFO);
	assert(resultrt == 0);
	resultrt = pthread_attr_setinheritsched
(&threadAttributsrt,PTHREAD_EXPLICIT_SCHED);
	assert(resultrt == 0);
    resultrt = pthread_create(&mythreadrt,
    							&threadAttributsrt,
    							mythreadfunctionrt,
    							0);
////// NOTE : NO PROBLEM IF A REPLACE pthread_create by
__real_pthread_create
    
    assert(resultrt == 0);
   
    
    // Enable Thread Start
	cout << "Enable Thread Loop Start" << endl;    
    resultrt = sem_post(&s_SemThreadStartEnable);
    assert(result == 0);
    
	// Suspend AppTask
    sem_t lockEnd;
    sem_init(&lockEnd,false,0);		// not available
	cout << "Infinite wait end app" << endl;     
    sem_wait(&lockEnd);

    return(0);
}

// Function   : Main
int main(int argc,char* argv[])
{
	// Mlock All for Xenomai
	mlockall(MCL_CURRENT | MCL_FUTURE);
	
	AppStartTask(0);	

	return 0;
}

Problem description:
when I run the application with eclipse using "run" command (no debug using
gdb) the application run correctly and I can stop it from eclipse.
The console output is:
Create Linux Thread
block on mqueue reception
Create Xenomai Thread
Enable Thread Loop Start
Infinite wait end app

when I launch the application with eclipse using "debug" command (gdb is
run). The console output is the same but when I stop the application, the PC
hangs (I need to push the reset button).

this problem doesn't occur when I only use linux standard threads (all
__real_pthread_create).

Do you have any idea? I'm I doing something totally wrong in my example.

Thanks in advance.
L.Poyart

Re: [Xenomai-help] Problem using xenomai threads with eclipse

[Gilles Chanteperdrix]

Laurent.POYART@fr.thalesgroup.com wrote:
> Hi,
> 
> I'm compiling a xenomai user land application using eclipse CDT 3.2.2  and
> my Pc hangs when I run it using debug (gbd). 
> 
> Context:
> 
> Linux kernel : 2.6.23
> Xenomai : 2.4.1
> Architecture: Pentium Dual Core (PC).
> Xenomai Configuration : priority coupling.
> Linker options: -Wl,--wrap,pthread_create -Wl,-soname=pthread_rt
> (only pthread_create is wrapped)
> 
> The application code is the following (the problem is described after the
> source code):
> 
> #include<iostream>
> #include<cassert>
> using namespace std;
> 
> #include <sys/mman.h>
> #include <pthread.h>
> #include <semaphore.h>
> #include <mqueue.h>
> #include <errno.h>
> 
> // Lock used to make the thread wait for start enable
> sem_t s_SemThreadStartEnable;
> 
> // For Test
> sem_t s_SemThreadTest;
>  
> // Thread function for the Xenomai RT Thread 
> void* mythreadfunctionrt(void* arg)
> {
> 	// Wait start Enable (not wrapped => linux syscall)
>     int result = sem_wait(&s_SemThreadStartEnable);
>     assert(result == 0);
> 
>     // Enter Thread Loop
> 	while(1)
> 	{
> 		// Wait for lock test (is not available => must preempt the
> thread)
> 		result = sem_wait(&s_SemThreadTest);
> 		assert(result == 0);
> 		
> 		// Never reach this point because lock is never released
> 	}	   
> 		
> 	return(0);	
> }
> 
> // Thread function for the linux Thread (not RT)
> void* mythreadfunction(void* arg)
> {
> 	mq_attr mqAttributs;
> 	mqAttributs.mq_flags = 0;
> 	mqAttributs.mq_maxmsg = 1; 
> 	mqAttributs.mq_msgsize =  sizeof(void*);	
> 	mqAttributs.mq_curmsgs = 0;
> 	// generates name
> 	mqd_t handle = mq_open("/OEmqTest",(O_RDWR | O_CREAT),(S_IRWXU |
> S_IRWXG),&mqAttributs);
> 	assert(handle >= 0);
> 	
> 	while(1)
> 	{
> 		 // Pend on the message queue (message is a pointer size =
> sizeof(void*))		
> 		 char* pt_obj = 0;
> 		 cout << "block on mqueue reception" << endl;
> 		 int result =
> mq_receive(handle,(char*)&pt_obj,sizeof(void*),0);
> 		 assert(result == 0);
> 	}	   
> 		
> 	return(0);	
> }
> 
> // ================================================================
> // Function   : AppStartTask
> // Goal    : Application Start Task
> // ================================================================
> void*  AppStartTask(void *p_arg)
> {
>     // ================  LINUX THREAD (NOT RT) ====================
>     // ================  REAL TIME PRIORITY => 12 / SCHED FIFO ==========
> 	 cout << "Create Linux Thread" << endl;	
>     // Thread Attributs Init
> 	pthread_t mythread;
> 	pthread_attr_t threadAttributs;
> 	int result = pthread_attr_init(&threadAttributs);	
> 	assert(result == 0);
> 	struct sched_param  scheduleParams;
> 	scheduleParams.sched_priority = 12;
> 	result =
> pthread_attr_setschedparam(&threadAttributs,&scheduleParams);
> 	assert(result == 0);
> 	pthread_attr_setschedpolicy (&threadAttributs,SCHED_FIFO);
> 	assert(result == 0);
> 	pthread_attr_setinheritsched
> (&threadAttributs,PTHREAD_EXPLICIT_SCHED);
> 	assert(result == 0);
>     result = __real_pthread_create(&mythread,
>     							&threadAttributs,
>     							mythreadfunction,
>     							0);
>     assert(result == 0);
> 
>     // Lock that enable RT thread loop
>     sem_init(&s_SemThreadStartEnable,false,0);		// not available
> 
>     // Test Lock
>     sem_init(&s_SemThreadTest,false,0);				// not
> available
>     
>     // ================  XENOMAI THREAD  ====================
>     // =======  REAL TIME PRIORITY => 11 / SCHED FIFO =======
> 	 cout << "Create Xenomai Thread" << endl;    
>     pthread_t mythreadrt;//
> 	pthread_attr_t threadAttributsrt;
> 	int resultrt = pthread_attr_init(&threadAttributsrt);
> 	assert(resultrt == 0);
> 	struct sched_param  scheduleParamsrt;
> 	scheduleParamsrt.sched_priority = 11;
> 	resultrt =
> pthread_attr_setschedparam(&threadAttributsrt,&scheduleParamsrt);
> 	assert(resultrt == 0);
> 	result = pthread_attr_setschedpolicy
> (&threadAttributsrt,SCHED_FIFO);
> 	assert(resultrt == 0);
> 	resultrt = pthread_attr_setinheritsched
> (&threadAttributsrt,PTHREAD_EXPLICIT_SCHED);
> 	assert(resultrt == 0);
>     resultrt = pthread_create(&mythreadrt,
>     							&threadAttributsrt,
>     							mythreadfunctionrt,
>     							0);
> ////// NOTE : NO PROBLEM IF A REPLACE pthread_create by
> __real_pthread_create
>     
>     assert(resultrt == 0);
>    
>     
>     // Enable Thread Start
> 	cout << "Enable Thread Loop Start" << endl;    
>     resultrt = sem_post(&s_SemThreadStartEnable);
>     assert(result == 0);
>     
> 	// Suspend AppTask
>     sem_t lockEnd;
>     sem_init(&lockEnd,false,0);		// not available
> 	cout << "Infinite wait end app" << endl;     
>     sem_wait(&lockEnd);
> 
>     return(0);
> }
> 
> // Function   : Main
> int main(int argc,char* argv[])
> {
> 	// Mlock All for Xenomai
> 	mlockall(MCL_CURRENT | MCL_FUTURE);
> 	
> 	AppStartTask(0);	
> 
> 	return 0;
> }
> 
> Problem description:
> when I run the application with eclipse using "run" command (no debug using
> gdb) the application run correctly and I can stop it from eclipse.
> The console output is:
> Create Linux Thread
> block on mqueue reception
> Create Xenomai Thread
> Enable Thread Loop Start
> Infinite wait end app
> 
> when I launch the application with eclipse using "debug" command (gdb is
> run). The console output is the same but when I stop the application, the PC
> hangs (I need to push the reset button).
> 
> this problem doesn't occur when I only use linux standard threads (all
> __real_pthread_create).
> 
> Do you have any idea? I'm I doing something totally wrong in my example.

When running under gdb, a lot of signals are sent, so, you should be 
prepared to restart syscalls when EINTR is returned, instead of simply 
failing with assert. However, assert should not cause your system to freeze.

Can you get any kernel messages, either by redirecting the console to a 
serial driver, or by running your example (with gdb) in plain text mode ?

-- 


					    Gilles.

Re: [Xenomai-help] Problem using xenomai threads with eclipse

[Laurent.POYART]

Hi,
I have tested with gdb in text mode and my Pc still freezes without any
message. I saw in the mailing list that there was some problems under title
"gdb + multi-threaded-applications + intel dual core" (which is my case) and
someone told to disable the dual core capability in the BIOS . I made this
test and I have no more the problem. I'm going to use this configuration as
it is not my final target.

Regards.
L.Poyart

> -----Message d'origine-----
> De : Gilles Chanteperdrix [mailto:gilles.chanteperdrix@xenomai.org]
> Envoyé : jeudi 19 juin 2008 02:16
> À : Laurent.POYART@fr.thalesgroup.com
> Cc : xenomai@xenomai.org
> Objet : Re: [Xenomai-help] Problem using xenomai threads with eclipse
> 
> 
> Laurent.POYART@fr.thalesgroup.com wrote:
> > Hi,
> > 
> > I'm compiling a xenomai user land application using eclipse 
> CDT 3.2.2  and
> > my Pc hangs when I run it using debug (gbd). 
> > 
> > Context:
> > 
> > Linux kernel : 2.6.23
> > Xenomai : 2.4.1
> > Architecture: Pentium Dual Core (PC).
> > Xenomai Configuration : priority coupling.
> > Linker options: -Wl,--wrap,pthread_create -Wl,-soname=pthread_rt
> > (only pthread_create is wrapped)
> > 
> > The application code is the following (the problem is 
> described after the
> > source code):
> > 
> > #include<iostream>
> > #include<cassert>
> > using namespace std;
> > 
> > #include <sys/mman.h>
> > #include <pthread.h>
> > #include <semaphore.h>
> > #include <mqueue.h>
> > #include <errno.h>
> > 
> > // Lock used to make the thread wait for start enable
> > sem_t s_SemThreadStartEnable;
> > 
> > // For Test
> > sem_t s_SemThreadTest;
> >  
> > // Thread function for the Xenomai RT Thread 
> > void* mythreadfunctionrt(void* arg)
> > {
> > 	// Wait start Enable (not wrapped => linux syscall)
> >     int result = sem_wait(&s_SemThreadStartEnable);
> >     assert(result == 0);
> > 
> >     // Enter Thread Loop
> > 	while(1)
> > 	{
> > 		// Wait for lock test (is not available => must 
> preempt the
> > thread)
> > 		result = sem_wait(&s_SemThreadTest);
> > 		assert(result == 0);
> > 		
> > 		// Never reach this point because lock is never released
> > 	}	   
> > 		
> > 	return(0);	
> > }
> > 
> > // Thread function for the linux Thread (not RT)
> > void* mythreadfunction(void* arg)
> > {
> > 	mq_attr mqAttributs;
> > 	mqAttributs.mq_flags = 0;
> > 	mqAttributs.mq_maxmsg = 1; 
> > 	mqAttributs.mq_msgsize =  sizeof(void*);	
> > 	mqAttributs.mq_curmsgs = 0;
> > 	// generates name
> > 	mqd_t handle = mq_open("/OEmqTest",(O_RDWR | O_CREAT),(S_IRWXU |
> > S_IRWXG),&mqAttributs);
> > 	assert(handle >= 0);
> > 	
> > 	while(1)
> > 	{
> > 		 // Pend on the message queue (message is a 
> pointer size =
> > sizeof(void*))		
> > 		 char* pt_obj = 0;
> > 		 cout << "block on mqueue reception" << endl;
> > 		 int result =
> > mq_receive(handle,(char*)&pt_obj,sizeof(void*),0);
> > 		 assert(result == 0);
> > 	}	   
> > 		
> > 	return(0);	
> > }
> > 
> > // ================================================================
> > // Function   : AppStartTask
> > // Goal    : Application Start Task
> > // ================================================================
> > void*  AppStartTask(void *p_arg)
> > {
> >     // ================  LINUX THREAD (NOT RT) ====================
> >     // ================  REAL TIME PRIORITY => 12 / SCHED 
> FIFO ==========
> > 	 cout << "Create Linux Thread" << endl;	
> >     // Thread Attributs Init
> > 	pthread_t mythread;
> > 	pthread_attr_t threadAttributs;
> > 	int result = pthread_attr_init(&threadAttributs);	
> > 	assert(result == 0);
> > 	struct sched_param  scheduleParams;
> > 	scheduleParams.sched_priority = 12;
> > 	result =
> > pthread_attr_setschedparam(&threadAttributs,&scheduleParams);
> > 	assert(result == 0);
> > 	pthread_attr_setschedpolicy (&threadAttributs,SCHED_FIFO);
> > 	assert(result == 0);
> > 	pthread_attr_setinheritsched
> > (&threadAttributs,PTHREAD_EXPLICIT_SCHED);
> > 	assert(result == 0);
> >     result = __real_pthread_create(&mythread,
> >     							
> &threadAttributs,
> >     							
> mythreadfunction,
> >     							0);
> >     assert(result == 0);
> > 
> >     // Lock that enable RT thread loop
> >     sem_init(&s_SemThreadStartEnable,false,0);		
> // not available
> > 
> >     // Test Lock
> >     sem_init(&s_SemThreadTest,false,0);			
> 	// not
> > available
> >     
> >     // ================  XENOMAI THREAD  ====================
> >     // =======  REAL TIME PRIORITY => 11 / SCHED FIFO =======
> > 	 cout << "Create Xenomai Thread" << endl;    
> >     pthread_t mythreadrt;//
> > 	pthread_attr_t threadAttributsrt;
> > 	int resultrt = pthread_attr_init(&threadAttributsrt);
> > 	assert(resultrt == 0);
> > 	struct sched_param  scheduleParamsrt;
> > 	scheduleParamsrt.sched_priority = 11;
> > 	resultrt =
> > pthread_attr_setschedparam(&threadAttributsrt,&scheduleParamsrt);
> > 	assert(resultrt == 0);
> > 	result = pthread_attr_setschedpolicy
> > (&threadAttributsrt,SCHED_FIFO);
> > 	assert(resultrt == 0);
> > 	resultrt = pthread_attr_setinheritsched
> > (&threadAttributsrt,PTHREAD_EXPLICIT_SCHED);
> > 	assert(resultrt == 0);
> >     resultrt = pthread_create(&mythreadrt,
> >     							
> &threadAttributsrt,
> >     							
> mythreadfunctionrt,
> >     							0);
> > ////// NOTE : NO PROBLEM IF A REPLACE pthread_create by
> > __real_pthread_create
> >     
> >     assert(resultrt == 0);
> >    
> >     
> >     // Enable Thread Start
> > 	cout << "Enable Thread Loop Start" << endl;    
> >     resultrt = sem_post(&s_SemThreadStartEnable);
> >     assert(result == 0);
> >     
> > 	// Suspend AppTask
> >     sem_t lockEnd;
> >     sem_init(&lockEnd,false,0);		// not available
> > 	cout << "Infinite wait end app" << endl;     
> >     sem_wait(&lockEnd);
> > 
> >     return(0);
> > }
> > 
> > // Function   : Main
> > int main(int argc,char* argv[])
> > {
> > 	// Mlock All for Xenomai
> > 	mlockall(MCL_CURRENT | MCL_FUTURE);
> > 	
> > 	AppStartTask(0);	
> > 
> > 	return 0;
> > }
> > 
> > Problem description:
> > when I run the application with eclipse using "run" command 
> (no debug using
> > gdb) the application run correctly and I can stop it from eclipse.
> > The console output is:
> > Create Linux Thread
> > block on mqueue reception
> > Create Xenomai Thread
> > Enable Thread Loop Start
> > Infinite wait end app
> > 
> > when I launch the application with eclipse using "debug" 
> command (gdb is
> > run). The console output is the same but when I stop the 
> application, the PC
> > hangs (I need to push the reset button).
> > 
> > this problem doesn't occur when I only use linux standard 
> threads (all
> > __real_pthread_create).
> > 
> > Do you have any idea? I'm I doing something totally wrong 
> in my example.
> 
> When running under gdb, a lot of signals are sent, so, you should be 
> prepared to restart syscalls when EINTR is returned, instead 
> of simply 
> failing with assert. However, assert should not cause your 
> system to freeze.
> 
> Can you get any kernel messages, either by redirecting the 
> console to a 
> serial driver, or by running your example (with gdb) in plain 
> text mode ?
> 
> -- 
> 
> 
> 					    Gilles.
> 

Re: [Xenomai-help] Problem using xenomai threads with eclipse

[Jan Kiszka]

Laurent.POYART@fr.thalesgroup.com wrote:
> Hi,
> 
> I'm compiling a xenomai user land application using eclipse CDT 3.2.2  and
> my Pc hangs when I run it using debug (gbd). 
> 
> Context:
> 
> Linux kernel : 2.6.23
> Xenomai : 2.4.1
> Architecture: Pentium Dual Core (PC).

We recently fixed some gdb issues, so it is probably wise to check with
an up-to-date version of Xenomai first.

Jan

-- 
Siemens AG, Corporate Technology, CT SE 2
Corporate Competence Center Embedded Linux

Re: [Xenomai-help] Problem using xenomai threads with eclipse

[Gilles Chanteperdrix]

Jan Kiszka wrote:
> Laurent.POYART@fr.thalesgroup.com wrote:
> 
>>Hi,
>>
>>I'm compiling a xenomai user land application using eclipse CDT 3.2.2  and
>>my Pc hangs when I run it using debug (gbd). 
>>
>>Context:
>>
>>Linux kernel : 2.6.23
>>Xenomai : 2.4.1
>>Architecture: Pentium Dual Core (PC).
> 
> 
> We recently fixed some gdb issues, so it is probably wise to check with
> an up-to-date version of Xenomai first.

Right. I missed that point. Generally, if you want to report a problem,
please check with the latest release if you have the problem as well, it
will save everybody's time.

-- 
                                                 Gilles Chanteperdrix