From: <jmsgrtn-alsa@yahoo.com>
To: alsa-devel@lists.sourceforge.net
Subject: No sound with intel hda driver on a sony vaio vgx xl100 system
Date: Mon, 22 Jan 2007 22:22:01 +0100 (CET) [thread overview]
Message-ID: <486159.63650.qm@web36806.mail.mud.yahoo.com> (raw)
Hi
I can't have any sound on my sony VAIO vgx-xl100 system with the 1.0.14rc2
build on a 2.6.18 kernel (debian)
the output of lspci -nv is :
00:1b.0 0403: 8086:27d8 (rev 01)
Subsystem: 104d:81f7
Flags: bus master, fast devsel, latency 0, IRQ 169
Memory at fdff8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
dmesg gives :
ACPI: PCI interrupt for device 0000:00:1b.0 disabled
PCI: Enabling device 0000:00:1b.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:696:
codec_mask = 0x1
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:611:
AUD_IN = 6
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:233:
UNMUTE IN: NID=0x6 IDX=0x0
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:233:
UNMUTE IN: NID=0xe IDX=0x0
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:233:
UNMUTE IN: NID=0x7 IDX=0x0
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:217:
UNMUTE OUT: NID=0x7
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:648:
[Capture Source] NID=0x6, #SRC=1
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:651:
[Line] IDX=0x0
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:289:
AUD_OUT found 2
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:233:
UNMUTE IN: NID=0xa IDX=0x0
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:217:
UNMUTE OUT: NID=0xa
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:217:
UNMUTE OUT: NID=0xa
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:251:
CONNECT: NID=0x6 IDX=0x0
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:713:
[Master Playback Switch] NID=0x2, DIR=OUT
ALSA
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:733:
[Master Playback Volume] NID=0x2, DIR=OUT
and the contents of /proc/asound/card0/codec# is :
Codec: SigmaTel CXD9872RD/K
Address: 0
Vendor Id: 0x83847661
Subsystem Id: 0x104d0b00
Revision Id: 0x104201
Default PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1
Node 0x02 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x3c 0x3c]
Power: 0x0
Node 0x03 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0xff 0xff]
Power: 0x0
Node 0x04 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0xff 0xff]
Power: 0x0
Node 0x05 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x3c 0x3c]
Power: 0x0
Node 0x06 [Audio Input] wcaps 0x1d0541: Stereo
Power: 0x0
Connection: 1
0x07
Node 0x07 [Audio Selector] wcaps 0x300903: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Connection: 1
0x0e
Node 0x08 [Audio Input] wcaps 0x1d0541: Stereo
Power: 0x0
Connection: 1
0x09
Node 0x09 [Audio Selector] wcaps 0x300903: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x80 0x80]
Connection: 1
0x15
Node 0x0a [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x08173c: IN OUT HP Detect
Pin Default 0x02024110: [Jack] Line Out at Ext Front
Conn = 1/4, Color = Green
Pin-ctls: 0xc0: OUT HP
Connection: 1
0x02
Node 0x0b [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0814: OUT Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x00:
Connection: 1
0x04
Node 0x0c [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0814: OUT Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x00:
Connection: 1
0x03
Node 0x0d [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x08173c: IN OUT HP Detect
Pin Default 0x02a19920: [Jack] Mic at Ext Front
Conn = 1/8, Color = Pink
Pin-ctls: 0x24: IN
Connection: 1
0x02
Node 0x0e [Pin Complex] wcaps 0x400081: Stereo
Pincap 0x0824: IN Detect
Pin Default 0x01845121: [Jack] Line In at Ext Rear
Conn = RCA, Color = Red
Pin-ctls: 0x20: IN
Node 0x0f [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0814: OUT Detect
Pin Default 0x01045111: [Jack] Line Out at Ext Rear
Conn = RCA, Color = Red
Pin-ctls: 0x40: OUT
Connection: 1
0x05
Node 0x10 [Audio Output] wcaps 0x40211: Stereo Digital
PCM:
rates [0x3e0]: 44100 48000 88200 96000 176400
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Node 0x11 [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x01451112: [Jack] SPDIF Out at Ext Rear
Conn = Optical, Color = Black
Pin-ctls: 0x00:
Connection: 2
0x10* 0x09
Node 0x12 [Audio Input] wcaps 0x140311: Stereo Digital
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Connection: 1
0x13
Node 0x13 [Pin Complex] wcaps 0x440381: Stereo Digital
Pincap 0x0834: IN OUT Detect
Pin Default 0x01c51122: [Jack] SPDIF In at Ext Rear
Conn = Optical, Color = Black
Pin-ctls: 0x00:
Connection: 1
0x18
Node 0x14 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x20: IN
Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=1
Amp-Out vals: [0x00 0x00]
Connection: 4
0x0a 0x0d* 0x14 0x02
Node 0x16 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=0
Amp-Out vals: [0x00]
Node 0x17 [Volume Knob Widget] wcaps 0x600000: Mono
Node 0x18 [Audio Output] wcaps 0x40201: Stereo Digital
---------------------------------
Jean-Marc Segretain
mailto:jmsegretain@yahoo.com
___________________________________________________________________________
Découvrez une nouvelle façon d'obtenir des réponses à toutes vos questions !
Profitez des connaissances, des opinions et des expériences des internautes sur Yahoo! Questions/Réponses
http://fr.answers.yahoo.com
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
next reply other threads:[~2007-01-22 21:22 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-01-22 21:22 jmsgrtn-alsa [this message]
2007-01-22 22:10 ` No sound with intel hda driver on a sony vaio vgx xl100 system Tobin Davis
2007-01-23 22:46 ` RE : " jmsgrtn-alsa
2007-01-25 12:28 ` Takashi Iwai
2007-01-25 22:20 ` RE : " jmsgrtn-alsa
2007-01-26 15:59 ` Takashi Iwai
2007-01-26 21:02 ` RE : " jmsgrtn-alsa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=486159.63650.qm@web36806.mail.mud.yahoo.com \
--to=jmsgrtn-alsa@yahoo.com \
--cc=alsa-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.