From: <jmsgrtn-alsa@yahoo.com>
To: Tobin Davis <tdavis@dsl-only.net>
Cc: alsa-devel@lists.sourceforge.net
Subject: RE : Re: No sound with intel hda driver on a sony vaio vgx xl100 system
Date: Tue, 23 Jan 2007 23:46:42 +0100 (CET) [thread overview]
Message-ID: <472402.83858.qm@web36808.mail.mud.yahoo.com> (raw)
In-Reply-To: <1169503839.31789.100.camel@localhost>
I have tried both model. none of them works.
Is there anything I missed ?
--- Tobin Davis <tdavis@dsl-only.net> a écrit :
> Your subsystem ID (104d:81f7) is not listed in the driver currently.
> The driver is configured to use the generic parser if it can't find a
> match.
>
> There are two defined models for your codec (vaio, vaio-ar). Try
> loading the driver with one of those models as follows:
> modprobe -r snd-hda-intel # remove driver
> modprobe snd-hda-intel model=vaio # reload with model deffinition
>
> Try both model deffinitions to see which works better for you. Report
> back your results and we'll get it added.
>
> Thanks,
>
> Tobin Davis
>
> On Mon, 2007-01-22 at 22:22 +0100, jmsgrtn-alsa@yahoo.com wrote:
>
> > Hi
> >
> > I can't have any sound on my sony VAIO vgx-xl100 system with the 1.0.14rc2
> > build on a 2.6.18 kernel (debian)
> >
> > the output of lspci -nv is :
> >
> > 00:1b.0 0403: 8086:27d8 (rev 01)
> > Subsystem: 104d:81f7
> > Flags: bus master, fast devsel, latency 0, IRQ 169
> > Memory at fdff8000 (64-bit, non-prefetchable) [size=16K]
> > Capabilities: <access denied>
> >
> > dmesg gives :
> >
> > ACPI: PCI interrupt for device 0000:00:1b.0 disabled
> > PCI: Enabling device 0000:00:1b.0 (0000 -> 0002)
> > ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
> > PCI: Setting latency timer of device 0000:00:1b.0 to 64
> > ALSA
> >
>
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:696:
> > codec_mask = 0x1
> > ALSA
> >
>
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:611:
> > AUD_IN = 6
> > ALSA
> >
>
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:233:
> > UNMUTE IN: NID=0x6 IDX=0x0
> > ALSA
> >
>
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:233:
> > UNMUTE IN: NID=0xe IDX=0x0
> > ALSA
> >
>
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:233:
> > UNMUTE IN: NID=0x7 IDX=0x0
> > ALSA
> >
>
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:217:
> > UNMUTE OUT: NID=0x7
> > ALSA
> >
>
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:648:
> > [Capture Source] NID=0x6, #SRC=1
> > ALSA
> >
>
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:651:
> > [Line] IDX=0x0
> > ALSA
> >
>
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:289:
> > AUD_OUT found 2
> > ALSA
> >
>
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:233:
> > UNMUTE IN: NID=0xa IDX=0x0
> > ALSA
> >
>
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:217:
> > UNMUTE OUT: NID=0xa
> > ALSA
> >
>
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:217:
> > UNMUTE OUT: NID=0xa
> > ALSA
> >
>
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:251:
> > CONNECT: NID=0x6 IDX=0x0
> > ALSA
> >
>
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:713:
> > [Master Playback Switch] NID=0x2, DIR=OUT
> > ALSA
> >
>
/home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_generic.c:733:
> > [Master Playback Volume] NID=0x2, DIR=OUT
> >
> > and the contents of /proc/asound/card0/codec# is :
> >
> > Codec: SigmaTel CXD9872RD/K
> > Address: 0
> > Vendor Id: 0x83847661
> > Subsystem Id: 0x104d0b00
> > Revision Id: 0x104201
> > Default PCM:
> > rates [0x7e0]: 44100 48000 88200 96000 176400 192000
> > bits [0xe]: 16 20 24
> > formats [0x1]: PCM
> > Default Amp-In caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
> > Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1
> > Node 0x02 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
> > Amp-Out caps: N/A
> > Amp-Out vals: [0x3c 0x3c]
> > Power: 0x0
> > Node 0x03 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
> > Amp-Out caps: N/A
> > Amp-Out vals: [0xff 0xff]
> > Power: 0x0
> > Node 0x04 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
> > Amp-Out caps: N/A
> > Amp-Out vals: [0xff 0xff]
> > Power: 0x0
> > Node 0x05 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out
> > Amp-Out caps: N/A
> > Amp-Out vals: [0x3c 0x3c]
> > Power: 0x0
> > Node 0x06 [Audio Input] wcaps 0x1d0541: Stereo
> > Power: 0x0
> > Connection: 1
> > 0x07
> > Node 0x07 [Audio Selector] wcaps 0x300903: Stereo Amp-In
> > Amp-In caps: N/A
> > Amp-In vals: [0x00 0x00]
> > Connection: 1
> > 0x0e
> > Node 0x08 [Audio Input] wcaps 0x1d0541: Stereo
> > Power: 0x0
> > Connection: 1
> > 0x09
> > Node 0x09 [Audio Selector] wcaps 0x300903: Stereo Amp-In
> > Amp-In caps: N/A
> > Amp-In vals: [0x80 0x80]
> > Connection: 1
> > 0x15
> > Node 0x0a [Pin Complex] wcaps 0x400181: Stereo
> > Pincap 0x08173c: IN OUT HP Detect
> > Pin Default 0x02024110: [Jack] Line Out at Ext Front
> > Conn = 1/4, Color = Green
> > Pin-ctls: 0xc0: OUT HP
> > Connection: 1
> > 0x02
> > Node 0x0b [Pin Complex] wcaps 0x400181: Stereo
> > Pincap 0x0814: OUT Detect
> > Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
> > Conn = 1/8, Color = Black
> > Pin-ctls: 0x00:
> > Connection: 1
> > 0x04
> > Node 0x0c [Pin Complex] wcaps 0x400181: Stereo
> > Pincap 0x0814: OUT Detect
> > Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
> > Conn = 1/8, Color = Black
> > Pin-ctls: 0x00:
> > Connection: 1
> > 0x03
> > Node 0x0d [Pin Complex] wcaps 0x400181: Stereo
> > Pincap 0x08173c: IN OUT HP Detect
> > Pin Default 0x02a19920: [Jack] Mic at Ext Front
> > Conn = 1/8, Color = Pink
> > Pin-ctls: 0x24: IN
> > Connection: 1
> > 0x02
> > Node 0x0e [Pin Complex] wcaps 0x400081: Stereo
> > Pincap 0x0824: IN Detect
> > Pin Default 0x01845121: [Jack] Line In at Ext Rear
> > Conn = RCA, Color = Red
> > Pin-ctls: 0x20: IN
> > Node 0x0f [Pin Complex] wcaps 0x400181: Stereo
> > Pincap 0x0814: OUT Detect
> > Pin Default 0x01045111: [Jack] Line Out at Ext Rear
> > Conn = RCA, Color = Red
> > Pin-ctls: 0x40: OUT
> > Connection: 1
> > 0x05
> > Node 0x10 [Audio Output] wcaps 0x40211: Stereo Digital
> > PCM:
> > rates [0x3e0]: 44100 48000 88200 96000 176400
> > bits [0xe]: 16 20 24
> > formats [0x5]: PCM AC3
> > Node 0x11 [Pin Complex] wcaps 0x400301: Stereo Digital
> > Pincap 0x0810: OUT
> > Pin Default 0x01451112: [Jack] SPDIF Out at Ext Rear
> > Conn = Optical, Color = Black
> > Pin-ctls: 0x00:
> > Connection: 2
> > 0x10* 0x09
> > Node 0x12 [Audio Input] wcaps 0x140311: Stereo Digital
> > PCM:
> > rates [0x160]: 44100 48000 96000
> > bits [0xe]: 16 20 24
>
=== message truncated ===
___________________________________________________________________________
Découvrez une nouvelle façon d'obtenir des réponses à toutes vos questions !
Profitez des connaissances, des opinions et des expériences des internautes sur Yahoo! Questions/Réponses
http://fr.answers.yahoo.com
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
next prev parent reply other threads:[~2007-01-23 22:46 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-01-22 21:22 No sound with intel hda driver on a sony vaio vgx xl100 system jmsgrtn-alsa
2007-01-22 22:10 ` Tobin Davis
2007-01-23 22:46 ` jmsgrtn-alsa [this message]
2007-01-25 12:28 ` RE : " Takashi Iwai
2007-01-25 22:20 ` RE : " jmsgrtn-alsa
2007-01-26 15:59 ` Takashi Iwai
2007-01-26 21:02 ` RE : " jmsgrtn-alsa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=472402.83858.qm@web36808.mail.mud.yahoo.com \
--to=jmsgrtn-alsa@yahoo.com \
--cc=alsa-devel@lists.sourceforge.net \
--cc=tdavis@dsl-only.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.