* [linux-dvb] Conexant Device 8852
@ 2008-06-29 21:20 Fabrizio Regalli
2008-06-29 21:27 ` Michael Krufky
0 siblings, 1 reply; 6+ messages in thread
From: Fabrizio Regalli @ 2008-06-29 21:20 UTC (permalink / raw)
To: linux-dvb
Hello.
I've the follow tv card on my linux box:
03:00.0 Multimedia video controller: Conexant Device 8852 (rev 02)
Subsystem: Hauppauge computer works Inc. Device 71d1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f9c00000 (64-bit, non-prefetchable) [size=2M]
Capabilities: [40] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0
<2us, L1 <4us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Vital Product Data <?>
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [200] Virtual Channel <?>
Kernel driver in use: cx23885
Kernel modules: cx23885
I try to use cx23885 driver (with card=<1,2,3,4,5,6> option) but doesn't works.
Could someone please help me?
Thanks.
Fab
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [linux-dvb] Conexant Device 8852
2008-06-29 21:20 [linux-dvb] Conexant Device 8852 Fabrizio Regalli
@ 2008-06-29 21:27 ` Michael Krufky
2008-06-29 21:37 ` Fabrizio Regalli
0 siblings, 1 reply; 6+ messages in thread
From: Michael Krufky @ 2008-06-29 21:27 UTC (permalink / raw)
To: Fabrizio Regalli; +Cc: linux-dvb
Fabrizio Regalli wrote:
> Hello.
>
> I've the follow tv card on my linux box:
>
> 03:00.0 Multimedia video controller: Conexant Device 8852 (rev 02)
> Subsystem: Hauppauge computer works Inc. Device 71d1
[snip]
>
> I try to use cx23885 driver (with card=<1,2,3,4,5,6> option) but doesn't works.
> Could someone please help me?
Use the cx23885 driver from linuxtv.org master branch -- Hauppauge WinTV-HVR1200 will be supported with the 2.6.26 kernel.
Regards,
Mike
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [linux-dvb] Conexant Device 8852
2008-06-29 21:27 ` Michael Krufky
@ 2008-06-29 21:37 ` Fabrizio Regalli
2008-06-29 21:39 ` Michael Krufky
0 siblings, 1 reply; 6+ messages in thread
From: Fabrizio Regalli @ 2008-06-29 21:37 UTC (permalink / raw)
To: Michael Krufky; +Cc: linux-dvb
Hi Michael
thanks for your reply.
Which extacly are the files needed? Maybe
http://linuxtv.org/downloads/linuxtv-dvb-1.1.1.tar.bz2
and
http://linuxtv.org/downloads/linuxtv-dvb-apps-1.1.1.tar.bz2
Thanks again.
Fab
2008/6/29 Michael Krufky <mkrufky@linuxtv.org>:
> Fabrizio Regalli wrote:
>> Hello.
>>
>> I've the follow tv card on my linux box:
>>
>> 03:00.0 Multimedia video controller: Conexant Device 8852 (rev 02)
>> Subsystem: Hauppauge computer works Inc. Device 71d1
> [snip]
>>
>> I try to use cx23885 driver (with card=<1,2,3,4,5,6> option) but doesn't works.
>> Could someone please help me?
>
>
> Use the cx23885 driver from linuxtv.org master branch -- Hauppauge WinTV-HVR1200 will be supported with the 2.6.26 kernel.
>
> Regards,
>
> Mike
>
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [linux-dvb] Conexant Device 8852
2008-06-29 21:37 ` Fabrizio Regalli
@ 2008-06-29 21:39 ` Michael Krufky
2008-06-29 22:00 ` Fabrizio Regalli
0 siblings, 1 reply; 6+ messages in thread
From: Michael Krufky @ 2008-06-29 21:39 UTC (permalink / raw)
To: Fabrizio Regalli; +Cc: linux-dvb
2008/6/29 Michael Krufky <mkrufky@linuxtv.org>:
>> Fabrizio Regalli wrote:
>>
>>> Hello.
>>>
>>> I've the follow tv card on my linux box:
>>>
>>> 03:00.0 Multimedia video controller: Conexant Device 8852 (rev 02)
>>> Subsystem: Hauppauge computer works Inc. Device 71d1
>>>
>> [snip]
>>
>>> I try to use cx23885 driver (with card=<1,2,3,4,5,6> option) but doesn't works.
>>> Could someone please help me?
>>>
>> Use the cx23885 driver from linuxtv.org master branch -- Hauppauge WinTV-HVR1200 will be supported with the 2.6.26 kernel.
>>
>> Regards,
>>
>> Mike
>>
>>
Fabrizio Regalli wrote:
> Hi Michael
>
> thanks for your reply.
> Which extacly are the files needed? Maybe
>
> http://linuxtv.org/downloads/linuxtv-dvb-1.1.1.tar.bz2
>
> and
>
> http://linuxtv.org/downloads/linuxtv-dvb-apps-1.1.1.tar.bz2
>
> Thanks again.
> Fab
>
Follow these instructions:
http://linuxtv.org/repo/#mercurial
Good luck!
-Mike
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [linux-dvb] Conexant Device 8852
2008-06-29 21:39 ` Michael Krufky
@ 2008-06-29 22:00 ` Fabrizio Regalli
2008-06-30 17:44 ` Fabrizio Regalli
0 siblings, 1 reply; 6+ messages in thread
From: Fabrizio Regalli @ 2008-06-29 22:00 UTC (permalink / raw)
To: Michael Krufky; +Cc: linux-dvb
Ok, I've installed the cvs version of driver.
Now I've another problem loading of cx23885 module:
WARNING: Error inserting videobuf_core
(/lib/modules/2.6.25.9/kernel/drivers/media/video/videobuf-core.ko):
Invalid argument
WARNING: Error inserting dvb_core
(/lib/modules/2.6.25.9/kernel/drivers/media/dvb/dvb-core/dvb-core.ko):
Invalid argument
WARNING: Error inserting videobuf_dvb
(/lib/modules/2.6.25.9/kernel/drivers/media/video/videobuf-dvb.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting videobuf_dma_sg
(/lib/modules/2.6.25.9/kernel/drivers/media/video/videobuf-dma-sg.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting compat_ioctl32
(/lib/modules/2.6.25.9/kernel/drivers/media/video/compat_ioctl32.ko):
Invalid module format
WARNING: Error inserting v4l1_compat
(/lib/modules/2.6.25.9/kernel/drivers/media/video/v4l1-compat.ko):
Invalid argument
WARNING: Error inserting videodev
(/lib/modules/2.6.25.9/kernel/drivers/media/video/videodev.ko):
Invalid module format
FATAL: Error inserting cx23885
(/lib/modules/2.6.25.9/kernel/drivers/media/video/cx23885/cx23885.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
Maybe I must disable the kernel native module before compile this new one?
Thanks.
Fab
2008/6/29 Michael Krufky <mkrufky@linuxtv.org>:
> 2008/6/29 Michael Krufky <mkrufky@linuxtv.org>:
>>> Fabrizio Regalli wrote:
>>>
>>>> Hello.
>>>>
>>>> I've the follow tv card on my linux box:
>>>>
>>>> 03:00.0 Multimedia video controller: Conexant Device 8852 (rev 02)
>>>> Subsystem: Hauppauge computer works Inc. Device 71d1
>>>>
>>> [snip]
>>>
>>>> I try to use cx23885 driver (with card=<1,2,3,4,5,6> option) but doesn't works.
>>>> Could someone please help me?
>>>>
>>> Use the cx23885 driver from linuxtv.org master branch -- Hauppauge WinTV-HVR1200 will be supported with the 2.6.26 kernel.
>>>
>>> Regards,
>>>
>>> Mike
>>>
>>>
>
> Fabrizio Regalli wrote:
>> Hi Michael
>>
>> thanks for your reply.
>> Which extacly are the files needed? Maybe
>>
>> http://linuxtv.org/downloads/linuxtv-dvb-1.1.1.tar.bz2
>>
>> and
>>
>> http://linuxtv.org/downloads/linuxtv-dvb-apps-1.1.1.tar.bz2
>>
>> Thanks again.
>> Fab
>>
>
> Follow these instructions:
>
> http://linuxtv.org/repo/#mercurial
>
> Good luck!
>
> -Mike
>
>
>
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [linux-dvb] Conexant Device 8852
2008-06-29 22:00 ` Fabrizio Regalli
@ 2008-06-30 17:44 ` Fabrizio Regalli
0 siblings, 0 replies; 6+ messages in thread
From: Fabrizio Regalli @ 2008-06-30 17:44 UTC (permalink / raw)
To: Michael Krufky; +Cc: linux-dvb
Yo! Now it's ok.
Follow these steps.
Get a new kernel soruce from kernel.org, recompile it *WITHOUT* any
devices like V4L or DVD.
Reboot the machine, install dvb from mercurial.
modprobe cx23885
and dmesg says:
CORE cx23885[0]: subsystem: 0070:71d1, board: Hauppauge WinTV-HVR1200
[card=7,autodetected]
cx23885[0]: i2c bus 0 registered
cx23885[0]: i2c bus 1 registered
cx23885[0]: i2c bus 2 registered
tveeprom 1-0050: Hauppauge model 71999, rev J1E9, serial# 3545326
tveeprom 1-0050: MAC address is 00-0D-FE-36-18-EE
tveeprom 1-0050: tuner model is Philips 18271_8295 (idx 149, type 54)
tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K)
ATSC/DVB Digital (eeprom 0xf4)
tveeprom 1-0050: audio processor is CX23885 (idx 39)
tveeprom 1-0050: decoder processor is CX23885B (idx 41)
tveeprom 1-0050: has no radio, has no IR receiver, has no IR transmitter
cx23885[0]: hauppauge eeprom: model=71999
cx23885[0]: cx23885 based dvb card
tda829x 2-0042: type set to tda8295
tda18271 2-0060: creating new instance
TDA18271HD/C1 detected @ 2-0060
DVB: registering new adapter (cx23885[0])
DVB: registering frontend 0 (NXP TDA10048HN DVB-T)...
cx23885_dev_checkrevision() Hardware revision = 0xb0
cx23885[0]/0: found at 0000:03:00.0, rev: 2, irq: 16, latency: 0,
mmio: 0xf9c00000
PCI: Setting latency timer of device 0000:03:00.0 to 64
The modules loads fine.
Now I can't try the card with some software because I'm remotely
connected, but later I'll trying.
Thanks to all, in particoular "sn9" from #linuxtv
Regards.
Fabrizio
2008/6/30 Fabrizio Regalli <fabreg@gmail.com>:
> Ok, I've installed the cvs version of driver.
>
> Now I've another problem loading of cx23885 module:
>
> WARNING: Error inserting videobuf_core
> (/lib/modules/2.6.25.9/kernel/drivers/media/video/videobuf-core.ko):
> Invalid argument
> WARNING: Error inserting dvb_core
> (/lib/modules/2.6.25.9/kernel/drivers/media/dvb/dvb-core/dvb-core.ko):
> Invalid argument
> WARNING: Error inserting videobuf_dvb
> (/lib/modules/2.6.25.9/kernel/drivers/media/video/videobuf-dvb.ko):
> Unknown symbol in module, or unknown parameter (see dmesg)
> WARNING: Error inserting videobuf_dma_sg
> (/lib/modules/2.6.25.9/kernel/drivers/media/video/videobuf-dma-sg.ko):
> Unknown symbol in module, or unknown parameter (see dmesg)
> WARNING: Error inserting compat_ioctl32
> (/lib/modules/2.6.25.9/kernel/drivers/media/video/compat_ioctl32.ko):
> Invalid module format
> WARNING: Error inserting v4l1_compat
> (/lib/modules/2.6.25.9/kernel/drivers/media/video/v4l1-compat.ko):
> Invalid argument
> WARNING: Error inserting videodev
> (/lib/modules/2.6.25.9/kernel/drivers/media/video/videodev.ko):
> Invalid module format
> FATAL: Error inserting cx23885
> (/lib/modules/2.6.25.9/kernel/drivers/media/video/cx23885/cx23885.ko):
> Unknown symbol in module, or unknown parameter (see dmesg)
>
> Maybe I must disable the kernel native module before compile this new one?
>
> Thanks.
> Fab
>
> 2008/6/29 Michael Krufky <mkrufky@linuxtv.org>:
>> 2008/6/29 Michael Krufky <mkrufky@linuxtv.org>:
>>>> Fabrizio Regalli wrote:
>>>>
>>>>> Hello.
>>>>>
>>>>> I've the follow tv card on my linux box:
>>>>>
>>>>> 03:00.0 Multimedia video controller: Conexant Device 8852 (rev 02)
>>>>> Subsystem: Hauppauge computer works Inc. Device 71d1
>>>>>
>>>> [snip]
>>>>
>>>>> I try to use cx23885 driver (with card=<1,2,3,4,5,6> option) but doesn't works.
>>>>> Could someone please help me?
>>>>>
>>>> Use the cx23885 driver from linuxtv.org master branch -- Hauppauge WinTV-HVR1200 will be supported with the 2.6.26 kernel.
>>>>
>>>> Regards,
>>>>
>>>> Mike
>>>>
>>>>
>>
>> Fabrizio Regalli wrote:
>>> Hi Michael
>>>
>>> thanks for your reply.
>>> Which extacly are the files needed? Maybe
>>>
>>> http://linuxtv.org/downloads/linuxtv-dvb-1.1.1.tar.bz2
>>>
>>> and
>>>
>>> http://linuxtv.org/downloads/linuxtv-dvb-apps-1.1.1.tar.bz2
>>>
>>> Thanks again.
>>> Fab
>>>
>>
>> Follow these instructions:
>>
>> http://linuxtv.org/repo/#mercurial
>>
>> Good luck!
>>
>> -Mike
>>
>>
>>
>
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2008-06-30 17:44 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-06-29 21:20 [linux-dvb] Conexant Device 8852 Fabrizio Regalli
2008-06-29 21:27 ` Michael Krufky
2008-06-29 21:37 ` Fabrizio Regalli
2008-06-29 21:39 ` Michael Krufky
2008-06-29 22:00 ` Fabrizio Regalli
2008-06-30 17:44 ` Fabrizio Regalli
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.