EMU10K1 Problem. Im stumped.

EMU10K1 Problem. Im stumped.

[Travis Place]

Just had a user on #alsa with an EMU10K1 problem.

To summarize, the card shows up in linux (but doesnt work), yet the card
works perfectly in windows. The correct modules are loading, but ALSA
doesnt see the card.

It had the user unload/reload snd-emu10k1 and check dmesg output, and
the relevant result is as follows.

EMU10K1_Audigy: probe of 0000:00:0a.0 failed with error -16

There complete alsa-info.sh output can be found at
http://pastebin.ca/1062377

I have had the user run this both with and without the onboard AC97 card
enabled (just to be sure).

What seems odd to me, is that the card is at 00:0a.0 and the SB Live
revision is showing as (rev 0a). Just doesnt look right to me.. 

The card is an Creative SBLive! 'SB0220'. I have one of these exact
cards here, if its needed for testing, but its never caused me any
issues.

Anyway, any help would be appreciated.

Thanks,
Travis Place (wishie)

Re: EMU10K1 Problem. Im stumped.

[James Courtier-Dutton]

Travis Place wrote:
> Just had a user on #alsa with an EMU10K1 problem.
>
> To summarize, the card shows up in linux (but doesnt work), yet the card
> works perfectly in windows. The correct modules are loading, but ALSA
> doesnt see the card.
>
> It had the user unload/reload snd-emu10k1 and check dmesg output, and
> the relevant result is as follows.
>
> EMU10K1_Audigy: probe of 0000:00:0a.0 failed with error -16
>
>   
The driver is requesting an IRQ to use, but fails to get it.
the output of
cat /proc/interrupts

and the entire dmesg output would help track this one down.