[linux-dvb] [Fwd: Re: dvb mpeg2?]

[linux-dvb] [Fwd: Re: dvb mpeg2?]

[Tim Farrington]

[-- Attachment #1: Type: text/plain, Size: 1 bytes --]



[-- Attachment #2: Re: [linux-dvb] dvb mpeg2?.eml --]
[-- Type: message/rfc822, Size: 2370 bytes --]

From: Tim Farrington <timf@iinet.net.au>
To: tobi@to-st.de
Subject: Re: [linux-dvb] dvb mpeg2?
Date: Thu, 24 Jul 2008 19:53:01 +0800
Message-ID: <48886D1D.20305@iinet.net.au>

Tobias Stoeber wrote:
> Hi Tim,
>
> well if its an TS it should look similiar like this (saying something 
> like "TS demuxer" etc.
>
> Playing /tmp/ProSieben_13.10.07-04.32.27.mpeg.
> Cache fill:  0.00% (0 bytes)    TS file format detected.
> DEMUX OPEN, AUDIO_ID: -1, VIDEO_ID: -1, SUBTITLE_ID: -1,
> PROBING UP TO 2000000, PROG: 0
> VIDEO MPEG2(pid=305)AUDIO MPA(pid=306) NO SUBS (yet)!  PROGRAM N. 0
> Opened TS demuxer, audio: 50(pid 306), video: 10000002(pid 
> 305)...POS=23688
> VIDEO:  MPEG2  720x576  (aspect 2)  25.000 fps  15000.0 kbps (1875.0 
> kbyte/s)
> ========================================================================== 
>
> Trying to force audio codec driver family libmad...
> Opening audio decoder: [libmad] libmad mpeg audio decoder
> AUDIO: 48000 Hz, 2 ch, s16le, 192.0 kbit/12.50% (ratio: 24000->192000)
> Selected audio codec: [mad] afm:libmad (libMAD MPEG layer 1-2-3)
> ========================================================================== 
>
> ID_FILENAME=/tmp/ProSieben_13.10.07-04.32.27.mpeg
> ID_VIDEO_FORMAT=0x10000002
> ID_VIDEO_BITRATE=15000000
> ID_VIDEO_WIDTH=720
> ID_VIDEO_HEIGHT=576
> ID_VIDEO_FPS=25.000
> ID_VIDEO_ASPECT=1.3333
> ID_AUDIO_CODEC=mad
> ID_AUDIO_FORMAT=80
> ID_AUDIO_BITRATE=192000
> ID_AUDIO_RATE=48000
> ID_AUDIO_NCH=2
> ID_LENGTH=2
>
> Cheers, Tobias
>
Hi Tobias,

Yes, that first one worked fine (even with all the frame data).
I can see that it's:
VIDEO MPEG2(pid=305)AUDIO MPA(pid=306) NO SUBS (yet)!  PROGRAM N. 0
Opened TS demuxer, audio: 50(pid 306), video: 10000002(pid 305)...POS=23688
VIDEO:  MPEG2  720x576  (aspect 2)  25.000 fps  15000.0 kbps (1875.0 
kbyte/s)

in mine, so that must mean that all is ok through the system - it is a 
MPEG2-TS stream
being dumped to file.

Now to figure out how to install replex!

Very many thanks for your help,
Tim Farrington



[-- Attachment #3: Type: text/plain, Size: 150 bytes --]

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] [Fwd: Re: dvb mpeg2?]

[Nico Sabbi]

On Thursday 24 July 2008 14:05:04 Tim Farrington wrote:

>
> Yes, that first one worked fine (even with all the frame data).
> I can see that it's:
> VIDEO MPEG2(pid=305)AUDIO MPA(pid=306) NO SUBS (yet)!  PROGRAM N. 0
> Opened TS demuxer, audio: 50(pid 306), video: 10000002(pid
> 305)...POS=23688 VIDEO:  MPEG2  720x576  (aspect 2)  25.000 fps
>  15000.0 kbps (1875.0 kbyte/s)
>
> in mine, so that must mean that all is ok through the system - it
> is a MPEG2-TS stream
> being dumped to file.
>
> Now to figure out how to install replex!
>
> Very many thanks for your help,
> Tim Farrington


the more stuff you insert in your pipeline the higher the chance
of breaking something (especially sync)

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb