[U-Boot-Users] [PATCH 1/1] Add support for the hammerhead (AVR32) board

[Michal Simek <monstr@seznam.cz>]

Could someone explain me what this message has relation with AVR32?
This is 100% microblaze relate problems.
Please change subject and cc to me if you have any problem with latest U-BOOT
for Microblaze.

Michal Simek



> Hi John,
> 
> look at
> http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/archive/2008/05/msg00163.html
> 
> Please use 
> 
>> Hi, again.
>>
>> I've used a new vendor/platform, I have the uclinux running in the same
>> target a ML501 with an older version based on ise and edk 8.2, but I need
>> approach the advantages of microblaze v7.00 and the PLB. Please thanks for
>> your help, and excuse my English.
>>
>> I don't know about inittab, and that init is selected in the application
>> menu.
>>
>>
>> 2008/7/24 Mostafa Ali <extra_brain@yahoo.com>:
>>
>>> Look there are so many reasons for this problem, Please mention more
>>> detalis(like have you used one of the predefined platforms in the
>>> vendor/platform menu or you created a new one).
>>>
>>> One of the reasons is that the kernel doesn't find a start up application.
>>> Make sure that inittab is exist in /romfs and init is selected in the
>>> application menu in petalinux configuration wizard. I need more de tails fro
>>> you, I'll be waiting.
>>>
>>> --- On *Thu, 7/24/08, John Osorio <kala855@gmail.com>* wrote:
>>>
>>> From: John Osorio <kala855@gmail.com>
>>> Subject: [microblaze-uclinux] Help with kernel boot, PLEASE
>>> To: microblaze-uclinux at itee.uq.edu.au
>>> Date: Thursday, July 24, 2008, 8:36 AM
>>>
>>>
>>>  Hi, folks
>>>
>>> I have a problem with the kernel boot, I'm using petalinux-v0.30-rc1 and
>>> kernel 2.6, my hardware is development under EDK 9.2_02 and ISE 9.2_04. When
>>> I'll try boot the image, the boot show in kermit the following:
>>>
>>>
>>> ## Booting image at 8c080000 ...
>>>    Image Name:   PetaLinux Kernel 2.6
>>>    Image Type:   Microblaze Linux Kernel Image (uncompressed)
>>>    Data Size:    2678812 Bytes =  2.6 MB
>>>    Load Address: 90000000
>>>    Entry Point:  90000000
>>>    Verifying Checksum ... OK
>>> OK
>>>
>>> That's  all I don't know, what's the problem, Please I need your Help, Bye.
>>> The boot is freeze, Kermit don't show anything
>>>
>>> --
>>> John Osorio
>>>
>>>
>>>
>>
>> -- 
>> John Osorio
>>
>>
>>
> 
> No virus found in this incoming message.
> Checked by AVG - http://www.avg.com 
> Version: 8.0.138 / Virus Database: 270.5.5/1571 - Release Date: 24.7.2008 05:42
> 
> 
>