From: Marco Stornelli <marco.stornelli@coritel.it>
To: Zhivko Yordanov <jivkojj@uni-kassel.de>
Cc: linuxppc-embedded@ozlabs.org
Subject: Re: Run Linux Kernel 2.6.26 with u-boot 1.1.2 - problem
Date: Tue, 05 Aug 2008 15:22:20 +0200 [thread overview]
Message-ID: <4898540C.2060105@coritel.it> (raw)
In-Reply-To: <200808051109.20398.jivkojj@uni-kassel.de>
Zhivko Yordanov ha scritto:
> Hi all,
>
> I have a PowerPC embedded board with CPU 7448 and Chipset Marvell 64560.
> Till now, on board runs U-boot 1.1.2 and Linux kernel 2.6.12, with patches
> from Marvell.
>
> I ported the Marvell patch to Linux 2.6.26, but I can't start it. Now I'm
> searching for the problem. Is this possible with old u-boot (1.1.2) to start
> new versions of Linux kernel, or I need to port u-boot too?
>
> Best regards,
> Zhivko Yordanov
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>
Have you wrote the dts file? I suggest you to change Uboot, 1.1.2 is
pretty old and if I remember correctly it doesn't support the dts, so
you should build a cuImage with the dts embedded in the kernel.
--
Marco Stornelli
Embedded Software Engineer
CoRiTeL - Consorzio di Ricerca sulle Telecomunicazioni
http://www.coritel.it
marco.stornelli@coritel.it
+39 06 72582838
prev parent reply other threads:[~2008-08-05 13:20 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-05 9:09 Run Linux Kernel 2.6.26 with u-boot 1.1.2 - problem Zhivko Yordanov
2008-08-05 13:22 ` Marco Stornelli [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4898540C.2060105@coritel.it \
--to=marco.stornelli@coritel.it \
--cc=jivkojj@uni-kassel.de \
--cc=linuxppc-embedded@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.