From: "Steven A. Falco" <sfalco@harris.com>
To: "Maciej W. Rozycki" <macro@linux-mips.org>
Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp>,
alessandro.zummo@towertech.it, rtc-linux@googlegroups.com,
will.newton@gmail.com, linux-kernel@vger.kernel.org
Subject: Re: [rtc-linux] Re: [RFC] Driver for Real Time Clock chip ST M41T65
Date: Wed, 27 Aug 2008 13:22:05 -0400 [thread overview]
Message-ID: <48B58D3D.6030808@harris.com> (raw)
In-Reply-To: <Pine.LNX.4.55.0808271717110.5930@cliff.in.clinika.pl>
Add support for M41T65 Real Time Clock chip
Signed-off-by: Steven A. Falco <sfalco@harris.com>
---
Fair enough. Here is a sorted version.
drivers/rtc/Kconfig | 14 +++++++-------
drivers/rtc/rtc-m41t80.c | 43 +++++++++++++++++++++++++++++++++----------
2 files changed, 40 insertions(+), 17 deletions(-)
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 4949dc4..c7586bc 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -220,22 +220,22 @@ config RTC_DRV_PCF8583
will be called rtc-pcf8583.
config RTC_DRV_M41T80
- tristate "ST M41T80/81/82/83/84/85/87"
+ tristate "ST M41T65/M41T80/81/82/83/84/85/87"
help
- If you say Y here you will get support for the
- ST M41T80 RTC chips series. Currently following chips are
- supported: M41T80, M41T81, M41T82, M41T83, M41ST84, M41ST85
- and M41ST87.
+ If you say Y here you will get support for the ST M41T60
+ and M41T80 RTC chips series. Currently, the following chips are
+ supported: M41T65, M41T80, M41T81, M41T82, M41T83, M41ST84,
+ M41ST85, and M41ST87.
This driver can also be built as a module. If so, the module
will be called rtc-m41t80.
config RTC_DRV_M41T80_WDT
- bool "ST M41T80 series RTC watchdog timer"
+ bool "ST M41T65/M41T80 series RTC watchdog timer"
depends on RTC_DRV_M41T80
help
If you say Y here you will get support for the
- watchdog timer in ST M41T80 RTC chips series.
+ watchdog timer in the ST M41T60 and M41T80 RTC chips series.
config RTC_DRV_TWL92330
boolean "TI TWL92330/Menelaus"
diff --git a/drivers/rtc/rtc-m41t80.c b/drivers/rtc/rtc-m41t80.c
index a3e0880..7eb4e05 100644
--- a/drivers/rtc/rtc-m41t80.c
+++ b/drivers/rtc/rtc-m41t80.c
@@ -55,21 +55,27 @@
#define M41T80_ALHOUR_HT (1 << 6) /* HT: Halt Update Bit */
#define M41T80_FLAGS_AF (1 << 6) /* AF: Alarm Flag Bit */
#define M41T80_FLAGS_BATT_LOW (1 << 4) /* BL: Battery Low Bit */
+#define M41T80_WATCHDOG_RB2 (1 << 7) /* RB: Watchdog resolution */
+#define M41T80_WATCHDOG_RB1 (1 << 1) /* RB: Watchdog resolution */
+#define M41T80_WATCHDOG_RB0 (1 << 0) /* RB: Watchdog resolution */
-#define M41T80_FEATURE_HT (1 << 0)
-#define M41T80_FEATURE_BL (1 << 1)
+#define M41T80_FEATURE_HT (1 << 0) /* Halt feature */
+#define M41T80_FEATURE_BL (1 << 1) /* Battery low indicator */
+#define M41T80_FEATURE_SQ (1 << 2) /* Squarewave feature */
+#define M41T80_FEATURE_WD (1 << 3) /* Extra watchdog resolution */
#define DRV_VERSION "0.05"
static const struct i2c_device_id m41t80_id[] = {
- { "m41t80", 0 },
- { "m41t81", M41T80_FEATURE_HT },
- { "m41t81s", M41T80_FEATURE_HT | M41T80_FEATURE_BL },
- { "m41t82", M41T80_FEATURE_HT | M41T80_FEATURE_BL },
- { "m41t83", M41T80_FEATURE_HT | M41T80_FEATURE_BL },
- { "m41st84", M41T80_FEATURE_HT | M41T80_FEATURE_BL },
- { "m41st85", M41T80_FEATURE_HT | M41T80_FEATURE_BL },
- { "m41st87", M41T80_FEATURE_HT | M41T80_FEATURE_BL },
+ { "m41t65", M41T80_FEATURE_HT | M41T80_FEATURE_WD },
+ { "m41t80", M41T80_FEATURE_SQ },
+ { "m41t81", M41T80_FEATURE_HT | M41T80_FEATURE_SQ},
+ { "m41t81s", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
+ { "m41t82", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
+ { "m41t83", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
+ { "m41st84", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
+ { "m41st85", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
+ { "m41st87", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ },
{ }
};
MODULE_DEVICE_TABLE(i2c, m41t80_id);
@@ -385,8 +391,12 @@ static ssize_t m41t80_sysfs_show_sqwfreq(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct i2c_client *client = to_i2c_client(dev);
+ struct m41t80_data *clientdata = i2c_get_clientdata(client);
int val;
+ if (!(clientdata->features & M41T80_FEATURE_SQ))
+ return -EINVAL;
+
val = i2c_smbus_read_byte_data(client, M41T80_REG_SQW);
if (val < 0)
return -EIO;
@@ -407,9 +417,13 @@ static ssize_t m41t80_sysfs_set_sqwfreq(struct device *dev,
const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
+ struct m41t80_data *clientdata = i2c_get_clientdata(client);
int almon, sqw;
int val = simple_strtoul(buf, NULL, 0);
+ if (!(clientdata->features & M41T80_FEATURE_SQ))
+ return -EINVAL;
+
if (val) {
if (!is_power_of_2(val))
return -EINVAL;
@@ -498,6 +512,8 @@ static void wdt_ping(void)
.buf = i2c_data,
},
};
+ struct m41t80_data *clientdata = i2c_get_clientdata(save_client);
+
i2c_data[0] = 0x09; /* watchdog register */
if (wdt_margin > 31)
@@ -508,6 +524,13 @@ static void wdt_ping(void)
*/
i2c_data[1] = wdt_margin<<2 | 0x82;
+ /*
+ * M41T65 has three bits for watchdog resolution. Don't set bit 7, as
+ * that would be an invalid resolution.
+ */
+ if (clientdata->features & M41T80_FEATURE_WD)
+ i2c_data[1] &= ~M41T80_WATCHDOG_RB2;
+
i2c_transfer(save_client->adapter, msgs1, 1);
}
--
1.5.5.1
next prev parent reply other threads:[~2008-08-27 17:22 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-25 17:27 [RFC] Driver for Real Time Clock chip ST M41T65 Steven A. Falco
2008-08-26 8:30 ` Will Newton
2008-08-26 13:55 ` Steven A. Falco
2008-08-26 14:00 ` Will Newton
2008-08-26 14:13 ` [rtc-linux] " Alessandro Zummo
2008-08-26 14:39 ` Steven A. Falco
2008-08-27 12:35 ` Atsushi Nemoto
2008-08-27 13:32 ` Steven A. Falco
2008-08-27 13:53 ` Atsushi Nemoto
2008-08-27 16:25 ` Maciej W. Rozycki
2008-08-27 17:22 ` Steven A. Falco [this message]
2008-08-27 19:27 ` Maciej W. Rozycki
2008-08-27 19:44 ` Alessandro Zummo
2008-08-26 14:42 ` Maciej W. Rozycki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48B58D3D.6030808@harris.com \
--to=sfalco@harris.com \
--cc=alessandro.zummo@towertech.it \
--cc=anemo@mba.ocn.ne.jp \
--cc=linux-kernel@vger.kernel.org \
--cc=macro@linux-mips.org \
--cc=rtc-linux@googlegroups.com \
--cc=will.newton@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.