* makedumpfile fails on SGI machine
@ 2008-07-30 14:14 Bernhard Walle
2008-07-31 1:46 ` Ken'ichi Ohmichi
0 siblings, 1 reply; 22+ messages in thread
From: Bernhard Walle @ 2008-07-30 14:14 UTC (permalink / raw)
To: Ken'ichi Ohmichi; +Cc: Jay Lan, kexec
Hi,
makedumpfile 1.2.7 fails on a SGI machine with following error:
readmem: Can't convert a virtual address(a0007fff8f900000) to offset.
The debug output is
--------------------------------------- 8< --------------------------
LOAD (0)
phys_start : 3014000000
phys_end : 301466d660
virt_start : a000000100000000
virt_end : a00000010066d660
LOAD (1)
phys_start : 3000080000
phys_end : 3000400000
virt_start : e000003000080000
virt_end : e000003000400000
LOAD (2)
phys_start : 3003000000
phys_end : 3006000000
virt_start : e000003003000000
virt_end : e000003006000000
LOAD (3)
phys_start : 3006000000
phys_end : 3014000000
virt_start : e000003006000000
virt_end : e000003014000000
LOAD (4)
phys_start : 3014000000
phys_end : 3014f0b000
virt_start : e000003014000000
virt_end : e000003014f0b000
LOAD (5)
phys_start : 3014f0b000
phys_end : 3018000000
virt_start : e000003014f0b000
virt_end : e000003018000000
LOAD (6)
phys_start : 3038000000
phys_end : 307bffe000
virt_start : e000003038000000
virt_end : e00000307bffe000
LOAD (7)
phys_start : b000080000
phys_end : b000400000
virt_start : e00000b000080000
virt_end : e00000b000400000
LOAD (8)
phys_start : b003000000
phys_end : b006000000
virt_start : e00000b003000000
virt_end : e00000b006000000
LOAD (9)
phys_start : b006000000
phys_end : b079e8c000
virt_start : e00000b006000000
virt_end : e00000b079e8c000
LOAD (10)
phys_start : b079e8c000
phys_end : b079e92000
virt_start : e00000b079e8c000
virt_end : e00000b079e92000
LOAD (11)
phys_start : b079e92000
phys_end : b079e93000
virt_start : e00000b079e92000
virt_end : e00000b079e93000
LOAD (12)
phys_start : b079e93000
phys_end : b07a3f2000
virt_start : e00000b079e93000
virt_end : e00000b07a3f2000
LOAD (13)
phys_start : b07a3f2000
phys_end : b07a452000
virt_start : e00000b07a3f2000
virt_end : e00000b07a452000
LOAD (14)
phys_start : b07a452000
phys_end : b07a7fe000
virt_start : e00000b07a452000
virt_end : e00000b07a7fe000
LOAD (15)
phys_start : b07b800000
phys_end : b07b801000
virt_start : e00000b07b800000
virt_end : e00000b07b801000
LOAD (16)
phys_start : b07b801000
phys_end : b07b88c000
virt_start : e00000b07b801000
virt_end : e00000b07b88c000
LOAD (17)
phys_start : b07b88c000
phys_end : b07b894000
virt_start : e00000b07b88c000
virt_end : e00000b07b894000
LOAD (18)
phys_start : b07b894000
phys_end : b07b896000
virt_start : e00000b07b894000
virt_end : e00000b07b896000
LOAD (19)
phys_start : b07b896000
phys_end : b07b89e000
virt_start : e00000b07b896000
virt_end : e00000b07b89e000
LOAD (20)
phys_start : b07b89e000
phys_end : b07b89f000
virt_start : e00000b07b89e000
virt_end : e00000b07b89f000
LOAD (21)
phys_start : b07b89f000
phys_end : b07ba00000
virt_start : e00000b07b89f000
virt_end : e00000b07ba00000
LOAD (22)
phys_start : b07ba00000
phys_end : b07bd5a000
virt_start : e00000b07ba00000
virt_end : e00000b07bd5a000
LOAD (23)
phys_start : b07bd94000
phys_end : b07be00000
virt_start : e00000b07bd94000
virt_end : e00000b07be00000
LOAD (24)
phys_start : b07be00000
phys_end : b07be12000
virt_start : e00000b07be00000
virt_end : e00000b07be12000
LOAD (25)
phys_start : b07be80000
phys_end : b07be8e000
virt_start : e00000b07be80000
virt_end : e00000b07be8e000
Linux kdump
max_mapnr : 2c1efa3
num of NODEs : 2
Memory type : DISCONTIGMEM
mem_map (0)
mem_map : 0
pfn_start : 0
pfn_end : c00c00
mem_map (1)
mem_map : a0007fff8f900000
pfn_start : c00c00
pfn_end : c1efff
mem_map (2)
mem_map : 0
pfn_start : c1efff
pfn_end : 2c00c00
mem_map (3)
mem_map : a0007fffff900000
pfn_start : 2c00c00
pfn_end : 2c1efa3
Checking for memory holes : [100 %] readmem: Can't convert a
virtual address(a0007fff8f900000) to offset.
--------------------------------------- >8 --------------------------
After debugging that, I didn't find an error code. That address is in
fact the beginning of the mem_map of that node, and is in fact not
mapped (I verified that in crash).
With an older kernel and an older makedumpfile it succeeds. The
debugging output here is:
---------------------------------------- 8< --------------------------
LOAD (0)
phys_start : 3014000000
phys_end : 30145ac840
virt_start : a000000100000000
virt_end : a0000001005ac840
LOAD (1)
phys_start : 3000080000
phys_end : 3000400000
virt_start : e000003000080000
virt_end : e000003000400000
LOAD (2)
phys_start : 3003000000
phys_end : 3006000000
virt_start : e000003003000000
virt_end : e000003006000000
LOAD (3)
phys_start : 3006000000
phys_end : 3014000000
virt_start : e000003006000000
virt_end : e000003014000000
LOAD (4)
phys_start : 3014000000
phys_end : 3015b9f000
virt_start : e000003014000000
virt_end : e000003015b9f000
LOAD (5)
phys_start : 3015b9f000
phys_end : 3018000000
virt_start : e000003015b9f000
virt_end : e000003018000000
LOAD (6)
phys_start : 3038000000
phys_end : 307bffe000
virt_start : e000003038000000
virt_end : e00000307bffe000
LOAD (7)
phys_start : b000080000
phys_end : b000400000
virt_start : e00000b000080000
virt_end : e00000b000400000
LOAD (8)
phys_start : b003000000
phys_end : b006000000
virt_start : e00000b003000000
virt_end : e00000b006000000
LOAD (9)
phys_start : b006000000
phys_end : b079ea2000
virt_start : e00000b006000000
virt_end : e00000b079ea2000
LOAD (10)
phys_start : b079ea2000
phys_end : b07a3f4000
virt_start : e00000b079ea2000
virt_end : e00000b07a3f4000
LOAD (11)
phys_start : b07a3f4000
phys_end : b07a452000
virt_start : e00000b07a3f4000
virt_end : e00000b07a452000
LOAD (12)
phys_start : b07a452000
phys_end : b07a7fe000
virt_start : e00000b07a452000
virt_end : e00000b07a7fe000
LOAD (13)
phys_start : b07b800000
phys_end : b07b801000
virt_start : e00000b07b800000
virt_end : e00000b07b801000
LOAD (14)
phys_start : b07b801000
phys_end : b07b88c000
virt_start : e00000b07b801000
virt_end : e00000b07b88c000
LOAD (15)
phys_start : b07b88c000
phys_end : b07b894000
virt_start : e00000b07b88c000
virt_end : e00000b07b894000
LOAD (16)
phys_start : b07b894000
phys_end : b07b896000
virt_start : e00000b07b894000
virt_end : e00000b07b896000
LOAD (17)
phys_start : b07b896000
phys_end : b07b89e000
virt_start : e00000b07b896000
virt_end : e00000b07b89e000
LOAD (18)
phys_start : b07b89e000
phys_end : b07b89f000
virt_start : e00000b07b89e000
virt_end : e00000b07b89f000
LOAD (19)
phys_start : b07b89f000
phys_end : b07ba00000
virt_start : e00000b07b89f000
virt_end : e00000b07ba00000
LOAD (20)
phys_start : b07ba00000
phys_end : b07bd5a000
virt_start : e00000b07ba00000
virt_end : e00000b07bd5a000
LOAD (21)
phys_start : b07bd94000
phys_end : b07be00000
virt_start : e00000b07bd94000
virt_end : e00000b07be00000
LOAD (22)
phys_start : b07be00000
phys_end : b07be12000
virt_start : e00000b07be00000
virt_end : e00000b07be12000
LOAD (23)
phys_start : b07be80000
phys_end : b07be8e000
virt_start : e00000b07be80000
virt_end : e00000b07be8e000
max_mapnr : 2c1efa3
num of NODEs : 2
Memory type : DISCONTIGMEM
pfn_end of node (1) is over max_mapnr.
pfn_start: 2c00000
pfn_end : 2c1f000
max_mapnr: 2c1efa3
mem_map (0)
mem_map : 0
pfn_start : 0
pfn_end : c00000
mem_map (1)
mem_map : a0007fff8f938000
pfn_start : c00000
pfn_end : c1f000
mem_map (2)
mem_map : 0
pfn_start : c1f000
pfn_end : 2c00000
mem_map (3)
mem_map : a0007fffff938000
pfn_start : 2c00000
pfn_end : 2c1efa3
--------------------- >8 -----------------------------------------
Can you help here? I'm currently a bit short in time ... :-(
Bernhard
--
Bernhard Walle, SUSE LINUX Products GmbH, Architecture Development
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: makedumpfile fails on SGI machine
2008-07-30 14:14 makedumpfile fails on SGI machine Bernhard Walle
@ 2008-07-31 1:46 ` Ken'ichi Ohmichi
2008-07-31 8:47 ` Bernhard Walle
0 siblings, 1 reply; 22+ messages in thread
From: Ken'ichi Ohmichi @ 2008-07-31 1:46 UTC (permalink / raw)
To: Bernhard Walle; +Cc: Jay Lan, kexec
[-- Attachment #1: Type: text/plain, Size: 736 bytes --]
Hi Bernhard,
Thank you for the report.
Bernhard Walle wrote:
> After debugging that, I didn't find an error code. That address is in
> fact the beginning of the mem_map of that node, and is in fact not
> mapped (I verified that in crash).
>
> With an older kernel and an older makedumpfile it succeeds.
I'd like to know whether this problem is due to the makedumpfile
regression or either the unsupported kernel. Could you please
fill the following items ?
* Problematic condition
kernel version: ?
makedumpfile version: 1.2.7
* Successful condition
kernel version: ?
makedumpfile version: ?
And could you please test the combination of successful kernel
and problematic makedumpfile(1.2.7) ?
Thanks
Ken'ichi Ohmichi
[-- Attachment #2: Type: text/plain, Size: 143 bytes --]
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: makedumpfile fails on SGI machine
2008-07-31 1:46 ` Ken'ichi Ohmichi
@ 2008-07-31 8:47 ` Bernhard Walle
2008-07-31 10:25 ` Ken'ichi Ohmichi
0 siblings, 1 reply; 22+ messages in thread
From: Bernhard Walle @ 2008-07-31 8:47 UTC (permalink / raw)
To: Ken'ichi Ohmichi; +Cc: Jay Lan, kexec
* Ken'ichi Ohmichi [2008-07-31 10:46]:
> Bernhard Walle wrote:
> > After debugging that, I didn't find an error code. That address is in
> > fact the beginning of the mem_map of that node, and is in fact not
> > mapped (I verified that in crash).
> >
> > With an older kernel and an older makedumpfile it succeeds.
>
> I'd like to know whether this problem is due to the makedumpfile
> regression or either the unsupported kernel. Could you please
> fill the following items ?
* Problematic condition
kernel version: 2.6.26
makedumpfile version: 1.2.7
* Successful condition
kernel version: 2.6.16.60 (SLES kernel)
makedumpfile version: 1.1.4 (SLES 10 SP2 version, but in fact that is
1.1.4 although -v displays something
different ;-))
> And could you please test the combination of successful kernel
> and problematic makedumpfile(1.2.7) ?
That works. Seems to be some kernel change.
Bernhard
--
Bernhard Walle, SUSE LINUX Products GmbH, Architecture Development
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: makedumpfile fails on SGI machine
2008-07-31 8:47 ` Bernhard Walle
@ 2008-07-31 10:25 ` Ken'ichi Ohmichi
2008-07-31 11:18 ` Bernhard Walle
0 siblings, 1 reply; 22+ messages in thread
From: Ken'ichi Ohmichi @ 2008-07-31 10:25 UTC (permalink / raw)
To: Bernhard Walle; +Cc: Jay Lan, kexec
[-- Attachment #1: Type: text/plain, Size: 1363 bytes --]
Hi Bernhard,
Bernhard Walle wrote:
> * Ken'ichi Ohmichi [2008-07-31 10:46]:
>> Bernhard Walle wrote:
>>> After debugging that, I didn't find an error code. That address is in
>>> fact the beginning of the mem_map of that node, and is in fact not
>>> mapped (I verified that in crash).
>>>
>>> With an older kernel and an older makedumpfile it succeeds.
>> I'd like to know whether this problem is due to the makedumpfile
>> regression or either the unsupported kernel. Could you please
>> fill the following items ?
>
> * Problematic condition
> kernel version: 2.6.26
> makedumpfile version: 1.2.7
>
> * Successful condition
> kernel version: 2.6.16.60 (SLES kernel)
> makedumpfile version: 1.1.4 (SLES 10 SP2 version, but in fact that is
> 1.1.4 although -v displays something
> different ;-))
>
>> And could you please test the combination of successful kernel
>> and problematic makedumpfile(1.2.7) ?
>
> That works. Seems to be some kernel change.
Thank you for quick response.
I tried to reproduce this problem on my machine by using an ia64 linux-2.6.26
discontigmem kernel, but it could not do it. makeudmpifle did not fail.
I want to know whether this problem depends on the kernel or either the machine.
Could you send me the kernel .config file ?
Thanks
Ken'ichi Ohmichi
[-- Attachment #2: Type: text/plain, Size: 143 bytes --]
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: makedumpfile fails on SGI machine
2008-07-31 10:25 ` Ken'ichi Ohmichi
@ 2008-07-31 11:18 ` Bernhard Walle
2008-07-31 11:36 ` Ken'ichi Ohmichi
0 siblings, 1 reply; 22+ messages in thread
From: Bernhard Walle @ 2008-07-31 11:18 UTC (permalink / raw)
To: Ken'ichi Ohmichi; +Cc: Jay Lan, kexec
[-- Attachment #1: Type: text/plain, Size: 483 bytes --]
* Ken'ichi Ohmichi [2008-07-31 19:25]:
>
>
> I tried to reproduce this problem on my machine by using an ia64 linux-2.6.26
> discontigmem kernel, but it could not do it. makeudmpifle did not fail.
> I want to know whether this problem depends on the kernel or either the machine.
> Could you send me the kernel .config file ?
I think that problem is machine specific. However, here is the .config.
Bernhard
--
Bernhard Walle, SUSE LINUX Products GmbH, Architecture Development
[-- Attachment #2: config --]
[-- Type: application/octet-stream, Size: 75810 bytes --]
#
# Automatically generated make config: don't edit
#
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-default"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SUSE_KERNEL=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_MARKERS=y
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_CLASSIC_RCU=y
#
# Processor type and features
#
CONFIG_IA64=y
CONFIG_64BIT=y
CONFIG_ZONE_DMA=y
CONFIG_QUICKLIST=y
CONFIG_MMU=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_DMI=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_IA64_UNCACHED_ALLOCATOR=y
CONFIG_AUDIT_ARCH=y
CONFIG_IA64_GENERIC=y
# CONFIG_IA64_DIG is not set
# CONFIG_IA64_HP_ZX1 is not set
# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
# CONFIG_IA64_SGI_SN2 is not set
# CONFIG_IA64_SGI_UV is not set
# CONFIG_IA64_HP_SIM is not set
# CONFIG_ITANIUM is not set
CONFIG_MCKINLEY=y
# CONFIG_IA64_PAGE_SIZE_4KB is not set
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
# CONFIG_PGTABLE_3 is not set
CONFIG_PGTABLE_4=y
CONFIG_HZ=250
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
# CONFIG_SCHED_HRTICK is not set
CONFIG_IA64_L1_CACHE_SHIFT=7
CONFIG_IA64_CYCLONE=y
CONFIG_IOSAPIC=y
CONFIG_FORCE_MAX_ZONEORDER=17
# CONFIG_VIRT_CPU_ACCOUNTING is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=1024
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_SCHED_SMT=y
CONFIG_PERMIT_BSP_REMOVE=y
CONFIG_FORCE_CPEI_RETARGET=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_DISCONTIGMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_NR_QUICK=1
CONFIG_VIRT_TO_BUS=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=8
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_VIRTUAL_MEM_MAP=y
CONFIG_HOLES_IN_ZONE=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_HAVE_ARCH_NODEDATA_EXTENSION=y
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_IA64_MCA_RECOVERY=m
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
# CONFIG_IA64_MC_ERR_INJECT is not set
CONFIG_SGI_SN=y
# CONFIG_IA64_ESI is not set
CONFIG_IA64_HP_AML_NFW=y
#
# SN Devices
#
CONFIG_SGI_IOC3=m
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
#
# Firmware Drivers
#
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
CONFIG_DMIID=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
#
# Power management and ACPI
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_ACPI=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_DOCK=m
CONFIG_ACPI_BAY=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
# CONFIG_ACPI_CUSTOM_DSDT_INITRD is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_CONTAINER=m
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPUFreq processor drivers
#
CONFIG_IA64_ACPI_CPUFREQ=m
#
# Bus options (PCI, PCMCIA)
#
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
CONFIG_PCIEAER=y
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
CONFIG_HOTPLUG_PCI=m
CONFIG_HOTPLUG_PCI_FAKE=m
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_SHPC=m
CONFIG_HOTPLUG_PCI_SGI=m
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
# CONFIG_YENTA is not set
CONFIG_PD6729=m
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=m
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=m
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_DEFAULT_BIC is not set
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
CONFIG_DEFAULT_RENO=y
CONFIG_DEFAULT_TCP_CONG="reno"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CONNTRACK_SLP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=m
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=m
#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=m
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100
CONFIG_IP_DCCP_TFRC_LIB=m
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# CONFIG_NET_DCCPPROBE is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_TIPC is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
CONFIG_ATM_CLIP_NO_ICMP=y
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_DECNET=m
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=y
CONFIG_LLC2=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_X25=m
CONFIG_LAPB=m
CONFIG_ECONET=m
# CONFIG_ECONET_AUNUDP is not set
# CONFIG_ECONET_NATIVE is not set
CONFIG_WAN_ROUTER=m
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_TCPPROBE=m
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=m
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=m
CONFIG_ROSE=m
#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_YAM=m
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=m
# CONFIG_CAN_DEBUG_DEVICES is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
# CONFIG_BT_HCIUSB is not set
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=m
CONFIG_FIB_RULES=y
#
# Wireless
#
CONFIG_CFG80211=m
CONFIG_NL80211=y
CONFIG_WIRELESS_EXT=y
CONFIG_MAC80211=m
#
# Rate control algorithm selection
#
CONFIG_MAC80211_RC_DEFAULT_PID=y
# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
#
# Selecting 'y' for an algorithm will
#
#
# build the algorithm into mac80211.
#
CONFIG_MAC80211_RC_DEFAULT="pid"
CONFIG_MAC80211_RC_PID=y
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
# CONFIG_MAC80211_DEBUG is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_RFKILL=m
CONFIG_RFKILL_INPUT=m
CONFIG_RFKILL_LEDS=y
CONFIG_NET_9P=m
# CONFIG_NET_9P_DEBUG is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=m
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
CONFIG_MTD_AR7_PARTS=m
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
CONFIG_RFD_FTL=m
# CONFIG_SSFDC is not set
CONFIG_MTD_OOPS=m
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_GEOMETRY is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
CONFIG_MTD_ABSENT=m
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0x4000000
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_PCI=m
CONFIG_MTD_INTEL_VR_NOR=m
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
CONFIG_MTD_PMC551_BUGFIX=y
# CONFIG_MTD_PMC551_DEBUG is not set
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOC2000=m
CONFIG_MTD_DOC2001=m
CONFIG_MTD_DOC2001PLUS=m
CONFIG_MTD_DOCPROBE=m
CONFIG_MTD_DOCECC=m
CONFIG_MTD_DOCPROBE_ADVANCED=y
CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
CONFIG_MTD_DOCPROBE_HIGH=y
CONFIG_MTD_DOCPROBE_55AA=y
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
CONFIG_MTD_NAND_ECC_SMC=y
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
CONFIG_MTD_NAND_IDS=m
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
CONFIG_MTD_NAND_CAFE=m
CONFIG_MTD_NAND_NANDSIM=m
CONFIG_MTD_NAND_PLATFORM=m
CONFIG_MTD_ALAUDA=m
CONFIG_MTD_ONENAND=m
# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
CONFIG_MTD_ONENAND_OTP=y
CONFIG_MTD_ONENAND_2X_PROGRAM=y
CONFIG_MTD_ONENAND_SIM=m
#
# UBI - Unsorted block images
#
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
# CONFIG_MTD_UBI_GLUEBI is not set
#
# UBI debugging options
#
# CONFIG_MTD_UBI_DEBUG is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_PARIDE=m
#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
CONFIG_PARIDE_EPATC8=y
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=128000
CONFIG_BLK_DEV_XIP=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=m
CONFIG_CIPHER_TWOFISH=m
CONFIG_MISC_DEVICES=y
CONFIG_PHANTOM=m
CONFIG_EEPROM_93CX6=m
CONFIG_SGI_IOC4=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_SGI_XP=m
CONFIG_HAVE_IDE=y
CONFIG_IDE=m
CONFIG_IDE_MAX_HWIFS=10
CONFIG_BLK_DEV_IDE=m
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=m
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECS=m
# CONFIG_BLK_DEV_DELKIN is not set
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_BLK_DEV_IDESCSI=m
CONFIG_BLK_DEV_IDEACPI=y
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
CONFIG_BLK_DEV_PLATFORM=m
CONFIG_BLK_DEV_IDEPNP=m
CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_OFFBOARD=y
CONFIG_BLK_DEV_GENERIC=m
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_AEC62XX=m
CONFIG_BLK_DEV_ALI15X3=m
# CONFIG_BLK_DEV_AMD74XX is not set
CONFIG_BLK_DEV_CMD64X=m
CONFIG_BLK_DEV_TRIFLEX=m
CONFIG_BLK_DEV_CY82C693=m
CONFIG_BLK_DEV_CS5520=m
CONFIG_BLK_DEV_CS5530=m
CONFIG_BLK_DEV_HPT34X=m
CONFIG_HPT34X_AUTODMA=y
CONFIG_BLK_DEV_HPT366=m
CONFIG_BLK_DEV_JMICRON=m
CONFIG_BLK_DEV_SC1200=m
CONFIG_BLK_DEV_PIIX=m
# CONFIG_BLK_DEV_IT8213 is not set
CONFIG_BLK_DEV_IT821X=m
CONFIG_BLK_DEV_NS87415=m
CONFIG_BLK_DEV_PDC202XX_OLD=m
CONFIG_BLK_DEV_PDC202XX_NEW=m
CONFIG_BLK_DEV_SVWKS=m
CONFIG_BLK_DEV_SGIIOC4=m
CONFIG_BLK_DEV_SIIMAGE=m
CONFIG_BLK_DEV_SLC90E66=m
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=m
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=m
CONFIG_AIC94XX_DEBUG=y
CONFIG_SCSI_DPT_I2O=m
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_ARCMSR=m
CONFIG_SCSI_ARCMSR_AER=y
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_DMX3191D=m
# CONFIG_SCSI_FUTURE_DOMAIN is not set
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_MVSAS=m
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_SRP=m
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_QLOGIC is not set
CONFIG_PCMCIA_SYM53C500=m
CONFIG_ATA=m
CONFIG_ATA_NONSTANDARD=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y
CONFIG_SATA_SVW=m
CONFIG_ATA_PIIX=m
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SX4=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m
# CONFIG_SATA_INIC162X is not set
CONFIG_PATA_ACPI=m
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_CMD640_PCI=m
CONFIG_PATA_CMD64X=m
CONFIG_PATA_CS5520=m
CONFIG_PATA_CS5530=m
CONFIG_PATA_CYPRESS=m
CONFIG_PATA_EFAR=m
# CONFIG_ATA_GENERIC is not set
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
# CONFIG_PATA_HPT3X3_DMA is not set
CONFIG_PATA_IT821X=m
# CONFIG_PATA_IT8213 is not set
CONFIG_PATA_JMICRON=m
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_MPIIX=m
# CONFIG_PATA_OLDPIIX is not set
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NINJA32=m
CONFIG_PATA_NS87410=m
CONFIG_PATA_NS87415=m
CONFIG_PATA_OPTI=m
CONFIG_PATA_OPTIDMA=m
# CONFIG_PATA_PCMCIA is not set
CONFIG_PATA_PDC_OLD=m
CONFIG_PATA_RADISYS=m
CONFIG_PATA_RZ1000=m
CONFIG_PATA_SC1200=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_VIA=m
CONFIG_PATA_WINBOND=m
CONFIG_PATA_SCH=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_EMC=m
CONFIG_DM_MULTIPATH_RDAC=m
CONFIG_DM_MULTIPATH_HP=m
CONFIG_DM_DELAY=m
CONFIG_DM_UEVENT=y
CONFIG_DM_RAID45=m
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
#
# Enable only one of the two stacks, unless you know what you are doing
#
# CONFIG_FIREWIRE is not set
CONFIG_IEEE1394=m
CONFIG_IEEE1394_OHCI1394=m
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_DV1394=m
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_MACVLAN=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_VETH=m
# CONFIG_NET_SB1000 is not set
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
CONFIG_ARCNET_CAP=m
# CONFIG_ARCNET_COM90xx is not set
CONFIG_ARCNET_COM90xxIO=m
# CONFIG_ARCNET_RIM_I is not set
# CONFIG_ARCNET_COM20020 is not set
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_ICPLUS_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_MDIO_BITBANG=m
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_ENC28J60=m
# CONFIG_ENC28J60_WRITEVERIFY is not set
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_AMD8111_ETH=m
# CONFIG_AMD8111E_NAPI is not set
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_ADAPTEC_STARFIRE_NAPI=y
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=m
CONFIG_FORCEDETH_NAPI=y
CONFIG_EEPRO100=m
CONFIG_E100=m
# CONFIG_FEALNX is not set
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R6040=m
CONFIG_SIS900=m
CONFIG_EPIC100=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
CONFIG_VIA_RHINE_NAPI=y
CONFIG_SC92031=m
# CONFIG_NET_POCKET is not set
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
CONFIG_E1000E=m
CONFIG_E1000E_ENABLED=y
CONFIG_IP1000=m
CONFIG_IGB=m
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_R8169=m
# CONFIG_R8169_NAPI is not set
CONFIG_R8169_VLAN=y
CONFIG_SIS190=m
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=m
CONFIG_BNX2=m
CONFIG_QLA3XXX=m
CONFIG_ATL1=m
CONFIG_NETDEV_10000=y
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T1_NAPI=y
CONFIG_CHELSIO_T3=m
CONFIG_IXGBE=m
CONFIG_IXGB=m
CONFIG_IXGB_NAPI=y
CONFIG_S2IO=m
CONFIG_S2IO_NAPI=y
CONFIG_MYRI10GE=m
CONFIG_NETXEN_NIC=m
CONFIG_NIU=m
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
CONFIG_TEHUTI=m
CONFIG_BNX2X=m
CONFIG_SFC=m
CONFIG_TR=y
CONFIG_IBMOL=m
CONFIG_3C359=m
# CONFIG_TMS380TR is not set
#
# Wireless LAN
#
CONFIG_WLAN_PRE80211=y
CONFIG_STRIP=m
CONFIG_PCMCIA_WAVELAN=m
CONFIG_PCMCIA_NETWAVE=m
CONFIG_WLAN_80211=y
CONFIG_PCMCIA_RAYCS=m
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not set
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_CS=m
# CONFIG_LIBERTAS_DEBUG is not set
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_WL3501=m
# CONFIG_PRISM54 is not set
CONFIG_USB_ZD1201=m
CONFIG_USB_NET_RNDIS_WLAN=m
CONFIG_RTL8180=m
CONFIG_RTL8187=m
CONFIG_ADM8211=m
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
CONFIG_P54_PCI=m
CONFIG_ATH5K=m
# CONFIG_ATH5K_DEBUG is not set
CONFIG_IWLWIFI=m
CONFIG_IWLCORE=m
CONFIG_IWLWIFI_LEDS=y
CONFIG_IWLWIFI_RFKILL=y
CONFIG_IWL4965=m
CONFIG_IWL4965_HT=y
CONFIG_IWL4965_LEDS=y
CONFIG_IWL4965_SPECTRUM_MEASUREMENT=y
CONFIG_IWL4965_SENSITIVITY=y
# CONFIG_IWLWIFI_DEBUG is not set
CONFIG_IWL3945=m
CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y
CONFIG_IWL3945_LEDS=y
# CONFIG_IWL3945_DEBUG is not set
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
CONFIG_B43=m
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_PCMCIA=y
CONFIG_B43_PIO=y
CONFIG_B43_LEDS=y
CONFIG_B43_RFKILL=y
# CONFIG_B43_DEBUG is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_RFKILL=y
# CONFIG_B43LEGACY_DEBUG is not set
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_RT2X00=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_RFKILL=y
CONFIG_RT2X00_LIB_LEDS=y
CONFIG_RT2400PCI=m
CONFIG_RT2400PCI_RFKILL=y
CONFIG_RT2400PCI_LEDS=y
CONFIG_RT2500PCI=m
CONFIG_RT2500PCI_RFKILL=y
CONFIG_RT2500PCI_LEDS=y
CONFIG_RT61PCI=m
CONFIG_RT61PCI_RFKILL=y
CONFIG_RT61PCI_LEDS=y
CONFIG_RT2500USB=m
CONFIG_RT2500USB_LEDS=y
CONFIG_RT73USB=m
CONFIG_RT73USB_LEDS=y
# CONFIG_RT2X00_LIB_DEBUGFS is not set
# CONFIG_RT2X00_DEBUG is not set
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_HSO=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
CONFIG_WAN=y
CONFIG_LANMEDIA=m
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
CONFIG_HDLC_RAW_ETH=m
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
CONFIG_HDLC_X25=m
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
# CONFIG_PC300 is not set
CONFIG_PC300TOO=m
CONFIG_FARSYNC=m
# CONFIG_DSCC4 is not set
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
# CONFIG_WAN_ROUTER_DRIVERS is not set
CONFIG_LAPBETHER=m
CONFIG_X25_ASY=m
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=m
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
CONFIG_ATM_ZATM=m
# CONFIG_ATM_ZATM_DEBUG is not set
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
CONFIG_ATM_IDT77252_RCV_ALL=y
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
CONFIG_ATM_FORE200E_MAYBE=m
CONFIG_ATM_FORE200E_PCA=y
CONFIG_ATM_FORE200E_PCA_DEFAULT_FW=y
CONFIG_ATM_FORE200E_USE_TASKLET=y
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_FORE200E=m
CONFIG_ATM_HE=m
CONFIG_ATM_HE_USE_SUNI=y
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
CONFIG_SKFP=m
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=m
CONFIG_ROADRUNNER_LARGE_RINGS=y
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_ISDN=m
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
CONFIG_ISDN_PPP_BSDCOMP=m
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
CONFIG_ISDN_X25=y
#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m
#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
# CONFIG_HISAX_NO_SENDCOMPLETE is not set
# CONFIG_HISAX_NO_LLC is not set
# CONFIG_HISAX_NO_KEYPAD is not set
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC_PCI=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
CONFIG_HISAX_DEBUG=y
#
# HiSax PCMCIA card service modules
#
CONFIG_HISAX_SEDLBAUER_CS=m
CONFIG_HISAX_ELSA_CS=m
CONFIG_HISAX_AVM_A1_CS=m
CONFIG_HISAX_TELES_CS=m
#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
CONFIG_HISAX_HFCUSB=m
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
CONFIG_HISAX_HDLC=y
#
# Active cards
#
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not set
CONFIG_GIGASET_UNDOCREQ=y
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_CAPI_TRACE=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
CONFIG_ISDN_CAPI_CAPIFS=m
CONFIG_ISDN_CAPI_CAPIDRV=m
#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
CONFIG_CAPI_EICON=y
CONFIG_ISDN_DIVAS=m
CONFIG_ISDN_DIVAS_BRIPCI=y
CONFIG_ISDN_DIVAS_PRIPCI=y
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS_USERIDI=m
# CONFIG_ISDN_DIVAS_MAINT is not set
CONFIG_PHONE=m
CONFIG_PHONE_IXJ=m
CONFIG_PHONE_IXJ_PCMCIA=m
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_SUNKBD=m
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_NEWTON=m
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_WACOM=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
CONFIG_TOUCHSCREEN_UCB1400=m
CONFIG_TOUCHSCREEN_WM97XX=m
CONFIG_TOUCHSCREEN_WM9705=y
CONFIG_TOUCHSCREEN_WM9712=y
CONFIG_TOUCHSCREEN_WM9713=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_ATI_REMOTE=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_POWERMATE=m
# CONFIG_INPUT_YEALINK is not set
CONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
# CONFIG_GAMEPORT_EMU10K1 is not set
CONFIG_GAMEPORT_FM801=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=m
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
CONFIG_CYZ_INTR=y
CONFIG_DIGIEPCA=m
CONFIG_MOXA_INTELLIO=m
# CONFIG_MOXA_SMARTIO is not set
CONFIG_ISI=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_N_HDLC=m
CONFIG_RISCOM8=m
CONFIG_SPECIALIX=m
# CONFIG_SPECIALIX_RTSCTS is not set
CONFIG_SX=m
CONFIG_RIO=m
CONFIG_RIO_OLDPCI=y
CONFIG_STALDRV=y
CONFIG_NOZOMI=m
CONFIG_SGI_SNSC=y
CONFIG_SGI_TIOCX=y
CONFIG_SGI_MBCS=m
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_SGI_L1_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_SERIAL_SGI_IOC4=m
CONFIG_SERIAL_SGI_IOC3=m
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=0
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=m
CONFIG_R3964=m
CONFIG_APPLICOM=m
#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_IPWIRELESS=m
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=4096
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
CONFIG_MMTIMER=m
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
CONFIG_DEVPORT=y
CONFIG_CRASHER=m
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_OCORES=m
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
CONFIG_I2C_SIMTEC=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_STUB=m
CONFIG_I2C_TINY_USB=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m
CONFIG_I2C_PCA_PLATFORM=m
#
# Miscellaneous I2C Chip support
#
CONFIG_DS1682=m
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
CONFIG_PCF8575=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_MAX6875=m
CONFIG_SENSORS_TSL2550=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=m
CONFIG_SPI_BUTTERFLY=m
CONFIG_SPI_LM70_LLP=m
#
# SPI Protocol Masters
#
CONFIG_SPI_AT25=m
CONFIG_SPI_SPIDEV=m
CONFIG_SPI_TLE62X0=m
CONFIG_W1=m
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2433=m
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2760=m
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=m
CONFIG_BATTERY_DS2760=m
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7473=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
#
# Multifunction device drivers
#
CONFIG_MFD_SM501=m
CONFIG_HTC_PASIC3=m
#
# Multimedia devices
#
#
# Multimedia core support
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
# CONFIG_VIDEO_ALLOW_V4L1 is not set
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_DVB_CORE=m
CONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_MEDIA_ATTACH=y
CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEOBUF_DVB=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR_I2C=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9875=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_OV7670=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_CX25840=m
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_VIVI=m
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BT848_DVB=y
CONFIG_VIDEO_SAA6588=m
CONFIG_VIDEO_SAA5246A=m
CONFIG_VIDEO_SAA5249=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX23885=m
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CAFE_CCIC=m
CONFIG_V4L_USB_DRIVERS=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_USBVISION=m
CONFIG_USB_ET61X251=m
CONFIG_USB_SN9C102=m
CONFIG_USB_ZC0301=m
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_SOC_CAMERA=m
CONFIG_SOC_CAMERA_MT9M001=m
CONFIG_SOC_CAMERA_MT9V022=m
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_GEMTEK_PCI=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_MAESTRO=m
CONFIG_USB_DSBR=m
CONFIG_USB_SI470X=m
CONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported SAA7146 based PCI Adapters
#
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_AV7110=m
# CONFIG_DVB_AV7110_FIRMWARE is not set
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m
#
# Supported USB Adapters
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_DVB_CINERGYT2=m
# CONFIG_DVB_CINERGYT2_TUNING is not set
#
# Supported FlexCopII (B2C2) Adapters
#
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
#
# Supported BT878 Adapters
#
CONFIG_DVB_BT8XX=m
#
# Supported Pluto2 Adapters
#
CONFIG_DVB_PLUTO2=m
#
# Supported DVB Frontends
#
#
# Customise DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_TDA10048=m
#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_S5H1411=m
#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
#
# SEC control devices for DVB-S
#
CONFIG_DVB_LNBP21=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DAB=y
CONFIG_USB_DABUSB=m
#
# Graphics support
#
CONFIG_AGP=m
CONFIG_AGP_I460=m
CONFIG_AGP_HP_ZX1=m
CONFIG_AGP_SGI_TIOCA=m
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
# CONFIG_DRM_VIA is not set
CONFIG_DRM_SAVAGE=m
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=m
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m
CONFIG_FB_PM2=m
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_CYBER2000=m
# CONFIG_FB_ASILIANT is not set
CONFIG_FB_IMSTT=y
CONFIG_FB_UVESA=m
CONFIG_FB_S1D13XXX=m
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=m
CONFIG_FB_RIVA_I2C=y
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_RIVA_BACKLIGHT=y
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=m
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
# CONFIG_FB_S3 is not set
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
# CONFIG_FB_SIS is not set
CONFIG_FB_NEOMAGIC=m
# CONFIG_FB_KYRO is not set
CONFIG_FB_3DFX=m
CONFIG_FB_3DFX_ACCEL=y
CONFIG_FB_VOODOO1=m
CONFIG_FB_VT8623=m
CONFIG_FB_TRIDENT=m
CONFIG_FB_TRIDENT_ACCEL=y
CONFIG_FB_ARK=m
CONFIG_FB_PM3=m
CONFIG_FB_SM501=m
# CONFIG_FB_VIRTUAL is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_LTV350QV=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_CORGI=m
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m
#
# Display hardware drivers
#
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
#
# Bootsplash configuration
#
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_DETECT is not set
# CONFIG_SND_PCM_XRUN_DEBUG is not set
CONFIG_SND_VMASTER=y
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
#
# PCI devices
#
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AW2=m
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_FM801=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_HIFIER=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
# CONFIG_SND_KORG1212_FIRMWARE_IN_KERNEL is not set
CONFIG_SND_MAESTRO3=m
# CONFIG_SND_MAESTRO3_FIRMWARE_IN_KERNEL is not set
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
# CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
#
# SPI devices
#
#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
#
# PCMCIA devices
#
CONFIG_SND_VXPOCKET=m
CONFIG_SND_PDAUDIOCF=m
#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set
#
# ALSA SoC audio for Freescale SOCs
#
#
# SoC Audio for the Texas Instruments OMAP
#
#
# Open Sound System
#
CONFIG_SOUND_PRIME=m
CONFIG_SOUND_TRIDENT=m
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_PANTHERLORD_FF=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=m
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_ISP1760_HCD=m
CONFIG_USB_ISP1760_PCI=y
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_U132_HCD is not set
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_CS=m
CONFIG_USB_R8A66597_HCD=m
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_ONETOUCH=y
CONFIG_USB_STORAGE_KARMA=y
CONFIG_USB_STORAGE_CYPRESS_ATACB=y
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
CONFIG_USB_MON=y
#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MOTOROLA=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_BERRY_CHARGE=m
# CONFIG_USB_LED is not set
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_PHIDGET=m
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETMOTORCONTROL=m
CONFIG_USB_PHIDGETSERVO=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
CONFIG_USB_ISIGHTFW=m
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
#
# LED drivers
#
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_IPATH=m
CONFIG_INFINIBAND_AMSO1100=m
# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
CONFIG_INFINIBAND_CXGB3=m
# CONFIG_INFINIBAND_CXGB3_DEBUG is not set
CONFIG_MLX4_INFINIBAND=m
CONFIG_INFINIBAND_NES=m
# CONFIG_INFINIBAND_NES_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_ISER=m
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=m
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_S35390A=m
CONFIG_RTC_DRV_FM3130=m
#
# SPI RTC drivers
#
CONFIG_RTC_DRV_MAX6902=m
CONFIG_RTC_DRV_R9701=m
CONFIG_RTC_DRV_RS5C348=m
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_STK17TA8=m
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_V3020=m
#
# on-CPU RTC drivers
#
CONFIG_AUXDISPLAY=y
# CONFIG_KS0108 is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_SMX=m
CONFIG_MSPEC=m
#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_NFS4ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4DEV_FS=m
CONFIG_EXT4DEV_FS_XATTR=y
CONFIG_EXT4DEV_FS_POSIX_ACL=y
CONFIG_EXT4DEV_FS_SECURITY=y
CONFIG_JBD=m
CONFIG_JBD_DEBUG=y
CONFIG_JBD2=m
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FS_NFS4ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_NOLOCK=m
CONFIG_GFS2_FS_LOCKING_DLM=m
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=m
CONFIG_MINIX_FS=y
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_ROMFS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
CONFIG_UFS_FS_WRITE=y
# CONFIG_UFS_DEBUG is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_XPRT_RDMA=m
# CONFIG_SUNRPC_BIND34 is not set
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
CONFIG_AFS_FS=m
# CONFIG_AFS_DEBUG is not set
CONFIG_9P_FS=m
CONFIG_NOVFS=m
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not set
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_PER_CPU=y
#
# HP Simulator drivers
#
# CONFIG_HP_SIMETH is not set
# CONFIG_HP_SIMSERIAL is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
CONFIG_RCU_TORTURE_TEST=m
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_LKDTM=m
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
# CONFIG_IA64_PRINT_HAZARDS is not set
# CONFIG_DISABLE_VHPT is not set
# CONFIG_IA64_DEBUG_CMPXCHG is not set
# CONFIG_IA64_DEBUG_IRQ is not set
CONFIG_KDB=y
CONFIG_KDB_MODULES=m
CONFIG_KDB_OFF=y
CONFIG_KDB_CONTINUE_CATASTROPHIC=2
CONFIG_KDB_USB=y
CONFIG_SYSVIPC_COMPAT=y
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
CONFIG_SECURITY_CAPABILITIES=y
CONFIG_SECURITY_FILE_CAPABILITIES=y
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT=y
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
CONFIG_SECURITY_APPARMOR=y
CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1
CONFIG_SECURITY_APPARMOR_DISABLE=y
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_HIFN_795X=m
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
[-- Attachment #3: Type: text/plain, Size: 143 bytes --]
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: makedumpfile fails on SGI machine
2008-07-31 11:18 ` Bernhard Walle
@ 2008-07-31 11:36 ` Ken'ichi Ohmichi
2008-07-31 11:38 ` Bernhard Walle
2008-08-05 12:07 ` Ken'ichi Ohmichi
0 siblings, 2 replies; 22+ messages in thread
From: Ken'ichi Ohmichi @ 2008-07-31 11:36 UTC (permalink / raw)
To: Bernhard Walle; +Cc: Jay Lan, kexec
[-- Attachment #1: Type: text/plain, Size: 581 bytes --]
Hi Bernhard,
Bernhard Walle wrote:
> * Ken'ichi Ohmichi [2008-07-31 19:25]:
>>
>> I tried to reproduce this problem on my machine by using an ia64 linux-2.6.26
>> discontigmem kernel, but it could not do it. makeudmpifle did not fail.
>> I want to know whether this problem depends on the kernel or either the machine.
>> Could you send me the kernel .config file ?
>
> I think that problem is machine specific. However, here is the .config.
Thank you for config file.
I'm starting the kernel compiling.
I'll investigate this problem the next week.
Thanks
Ken'ichi Ohmichi
[-- Attachment #2: Type: text/plain, Size: 143 bytes --]
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: makedumpfile fails on SGI machine
2008-07-31 11:36 ` Ken'ichi Ohmichi
@ 2008-07-31 11:38 ` Bernhard Walle
2008-08-05 12:07 ` Ken'ichi Ohmichi
1 sibling, 0 replies; 22+ messages in thread
From: Bernhard Walle @ 2008-07-31 11:38 UTC (permalink / raw)
To: Ken'ichi Ohmichi; +Cc: Jay Lan, kexec
* Ken'ichi Ohmichi [2008-07-31 20:36]:
>
> Thank you for config file.
>
> I'm starting the kernel compiling.
> I'll investigate this problem the next week.
Thanks in advance.
Bernhard
--
Bernhard Walle, SUSE LINUX Products GmbH, Architecture Development
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: makedumpfile fails on SGI machine
2008-07-31 11:36 ` Ken'ichi Ohmichi
2008-07-31 11:38 ` Bernhard Walle
@ 2008-08-05 12:07 ` Ken'ichi Ohmichi
2008-08-05 15:11 ` Bernhard Walle
1 sibling, 1 reply; 22+ messages in thread
From: Ken'ichi Ohmichi @ 2008-08-05 12:07 UTC (permalink / raw)
To: Bernhard Walle; +Cc: Jay Lan, kexec
[-- Attachment #1: Type: text/plain, Size: 2251 bytes --]
Hi Bernhard,
Ken'ichi Ohmichi wrote:
>> * Ken'ichi Ohmichi [2008-07-31 19:25]:
>>> I tried to reproduce this problem on my machine by using an ia64 linux-2.6.26
>>> discontigmem kernel, but it could not do it. makeudmpifle did not fail.
>>> I want to know whether this problem depends on the kernel or either the machine.
>>> Could you send me the kernel .config file ?
>> I think that problem is machine specific. However, here is the .config.
>
> Thank you for config file.
>
> I'm starting the kernel compiling.
> I'll investigate this problem the next week.
Unfortunately, the compiled kernel got panic when booting.
So I cannot reproduce this problem on my machine yet.
I'm trying it again.
BTW, I'd like to know some conditions of this problem.
So please let me know the makedumpfile commandline which you run.
Ex. # makedumpfile -d 31 -x vmlinux /proc/vmcore dumpfile
I doubt that makedumpfile cannot distinguish the pgtable correctly.
I created the debugging patch. Please run makedumpfile-1.2.7 applied
with it by '-D' option, and report the output.
According to your kernel .config file, the output should contain
"PAGETABLE_4L : ON".
Thanks
Ken'ichi Ohmichi
---
diff -puN backup/v1.2.7/ia64.c makedumpfile/ia64.c
--- backup/v1.2.7/ia64.c 2008-07-18 11:23:29.000000000 +0900
+++ makedumpfile/ia64.c 2008-08-06 05:40:27.000000000 +0900
@@ -67,21 +67,20 @@ get_machdep_info_ia64(void)
else
info->vmalloc_start = KERNEL_VMALLOC_BASE;
- if ((vt.mem_flags & MEMORY_PAGETABLE_4L)
- || (vt.mem_flags & MEMORY_PAGETABLE_3L))
- return TRUE;
-
/*
* Check the pgtable (3 Levels or 4 Levels).
*/
- if (!strncmp(SRCFILE(pud_t), STR_PUD_T_4L, strlen(STR_PUD_T_4L)))
+ if ((vt.mem_flags & MEMORY_PAGETABLE_4L)
+ || !strncmp(SRCFILE(pud_t), STR_PUD_T_4L, strlen(STR_PUD_T_4L))) {
vt.mem_flags |= MEMORY_PAGETABLE_4L;
-
- else if (!strncmp(SRCFILE(pud_t), STR_PUD_T_3L, strlen(STR_PUD_T_3L)))
+ DEBUG_MSG("PAGETABLE_4L : ON\n");
+ } else if ((vt.mem_flags & MEMORY_PAGETABLE_3L)
+ || !strncmp(SRCFILE(pud_t), STR_PUD_T_3L, strlen(STR_PUD_T_3L))) {
vt.mem_flags |= MEMORY_PAGETABLE_3L;
-
- else
+ DEBUG_MSG("PAGETABLE_3L : ON\n");
+ } else {
MSG("Can't distinguish the pgtable.\n");
+ }
return TRUE;
}
[-- Attachment #2: Type: text/plain, Size: 143 bytes --]
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: makedumpfile fails on SGI machine
2008-08-05 12:07 ` Ken'ichi Ohmichi
@ 2008-08-05 15:11 ` Bernhard Walle
2008-08-18 7:19 ` Ken'ichi Ohmichi
0 siblings, 1 reply; 22+ messages in thread
From: Bernhard Walle @ 2008-08-05 15:11 UTC (permalink / raw)
To: Ken'ichi Ohmichi; +Cc: Jay Lan, kexec
[-- Attachment #1: Type: text/plain, Size: 675 bytes --]
* Ken'ichi Ohmichi [2008-08-05 21:07]:
>
> BTW, I'd like to know some conditions of this problem.
> So please let me know the makedumpfile commandline which you run.
> Ex. # makedumpfile -d 31 -x vmlinux /proc/vmcore dumpfile
# makedumpfile -d 3 -D vmcore.sles11 vmcore.sles11.filtered
> I doubt that makedumpfile cannot distinguish the pgtable correctly.
> I created the debugging patch. Please run makedumpfile-1.2.7 applied
> with it by '-D' option, and report the output.
> According to your kernel .config file, the output should contain
> "PAGETABLE_4L : ON".
See the attachment.
Bernhard
--
Bernhard Walle, SUSE LINUX Products GmbH, Architecture Development
[-- Attachment #2: log --]
[-- Type: application/octet-stream, Size: 3925 bytes --]
\rChecking for memory holes : [ 0 %] \rChecking for memory holes : [100 %] readmem: Can't convert a virtual address(a0007fff8f900000) to offset.
create_2nd_bitmap: Can't exclude unnecessary pages.
LOAD (0)
phys_start : 3014000000
phys_end : 3014639580
virt_start : a000000100000000
virt_end : a000000100639580
LOAD (1)
phys_start : 3000080000
phys_end : 3000400000
virt_start : e000003000080000
virt_end : e000003000400000
LOAD (2)
phys_start : 3003000000
phys_end : 3006000000
virt_start : e000003003000000
virt_end : e000003006000000
LOAD (3)
phys_start : 3006000000
phys_end : 3014000000
virt_start : e000003006000000
virt_end : e000003014000000
LOAD (4)
phys_start : 3014000000
phys_end : 3014ec3000
virt_start : e000003014000000
virt_end : e000003014ec3000
LOAD (5)
phys_start : 3014ec3000
phys_end : 3018000000
virt_start : e000003014ec3000
virt_end : e000003018000000
LOAD (6)
phys_start : 3038000000
phys_end : 307bffe000
virt_start : e000003038000000
virt_end : e00000307bffe000
LOAD (7)
phys_start : b000080000
phys_end : b000400000
virt_start : e00000b000080000
virt_end : e00000b000400000
LOAD (8)
phys_start : b003000000
phys_end : b006000000
virt_start : e00000b003000000
virt_end : e00000b006000000
LOAD (9)
phys_start : b006000000
phys_end : b079ea0000
virt_start : e00000b006000000
virt_end : e00000b079ea0000
LOAD (10)
phys_start : b079ea0000
phys_end : b079ea6000
virt_start : e00000b079ea0000
virt_end : e00000b079ea6000
LOAD (11)
phys_start : b079ea6000
phys_end : b079ea7000
virt_start : e00000b079ea6000
virt_end : e00000b079ea7000
LOAD (12)
phys_start : b079ea7000
phys_end : b07a3f2000
virt_start : e00000b079ea7000
virt_end : e00000b07a3f2000
LOAD (13)
phys_start : b07a3f2000
phys_end : b07a452000
virt_start : e00000b07a3f2000
virt_end : e00000b07a452000
LOAD (14)
phys_start : b07a452000
phys_end : b07a7fe000
virt_start : e00000b07a452000
virt_end : e00000b07a7fe000
LOAD (15)
phys_start : b07b800000
phys_end : b07b801000
virt_start : e00000b07b800000
virt_end : e00000b07b801000
LOAD (16)
phys_start : b07b801000
phys_end : b07b88c000
virt_start : e00000b07b801000
virt_end : e00000b07b88c000
LOAD (17)
phys_start : b07b88c000
phys_end : b07b894000
virt_start : e00000b07b88c000
virt_end : e00000b07b894000
LOAD (18)
phys_start : b07b894000
phys_end : b07b896000
virt_start : e00000b07b894000
virt_end : e00000b07b896000
LOAD (19)
phys_start : b07b896000
phys_end : b07b89e000
virt_start : e00000b07b896000
virt_end : e00000b07b89e000
LOAD (20)
phys_start : b07b89e000
phys_end : b07b89f000
virt_start : e00000b07b89e000
virt_end : e00000b07b89f000
LOAD (21)
phys_start : b07b89f000
phys_end : b07ba00000
virt_start : e00000b07b89f000
virt_end : e00000b07ba00000
LOAD (22)
phys_start : b07ba00000
phys_end : b07bd5a000
virt_start : e00000b07ba00000
virt_end : e00000b07bd5a000
LOAD (23)
phys_start : b07bd94000
phys_end : b07be00000
virt_start : e00000b07bd94000
virt_end : e00000b07be00000
LOAD (24)
phys_start : b07be00000
phys_end : b07be12000
virt_start : e00000b07be00000
virt_end : e00000b07be12000
LOAD (25)
phys_start : b07be80000
phys_end : b07be8e000
virt_start : e00000b07be80000
virt_end : e00000b07be8e000
Linux kdump
max_mapnr : 2c1efa3
PAGETABLE_4L : ON
num of NODEs : 2
Memory type : DISCONTIGMEM
mem_map (0)
mem_map : 0
pfn_start : 0
pfn_end : c00c00
mem_map (1)
mem_map : a0007fff8f900000
pfn_start : c00c00
pfn_end : c1efff
mem_map (2)
mem_map : 0
pfn_start : c1efff
pfn_end : 2c00c00
mem_map (3)
mem_map : a0007fffff900000
pfn_start : 2c00c00
pfn_end : 2c1efa3
makedumpfile Failed.
[-- Attachment #3: Type: text/plain, Size: 143 bytes --]
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: makedumpfile fails on SGI machine
2008-08-05 15:11 ` Bernhard Walle
@ 2008-08-18 7:19 ` Ken'ichi Ohmichi
2008-08-18 11:00 ` Bernhard Walle
0 siblings, 1 reply; 22+ messages in thread
From: Ken'ichi Ohmichi @ 2008-08-18 7:19 UTC (permalink / raw)
To: Bernhard Walle; +Cc: Jay Lan, kexec
[-- Attachment #1: Type: text/plain, Size: 931 bytes --]
Hi Bernhard,
Bernhard Walle wrote:
> * Ken'ichi Ohmichi [2008-08-05 21:07]:
>> BTW, I'd like to know some conditions of this problem.
>> So please let me know the makedumpfile commandline which you run.
>> Ex. # makedumpfile -d 31 -x vmlinux /proc/vmcore dumpfile
>
> # makedumpfile -d 3 -D vmcore.sles11 vmcore.sles11.filtered
>
>> I doubt that makedumpfile cannot distinguish the pgtable correctly.
>> I created the debugging patch. Please run makedumpfile-1.2.7 applied
>> with it by '-D' option, and report the output.
>> According to your kernel .config file, the output should contain
>> "PAGETABLE_4L : ON".
>
> See the attachment.
Thanks for the log.
makedumpfile can distinguish the pgtable correctly.
Can the crash utility translate the virtual address 0xa0007fff8f900000
to physical address ? Please run the following subcommand on the crash
utility.
crash> vtop 0xa0007fff8f900000
Thanks
Ken'ichi Ohmichi
[-- Attachment #2: Type: text/plain, Size: 143 bytes --]
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: makedumpfile fails on SGI machine
2008-08-18 7:19 ` Ken'ichi Ohmichi
@ 2008-08-18 11:00 ` Bernhard Walle
2008-08-19 12:14 ` Ken'ichi Ohmichi
2008-08-27 9:00 ` Ken'ichi Ohmichi
0 siblings, 2 replies; 22+ messages in thread
From: Bernhard Walle @ 2008-08-18 11:00 UTC (permalink / raw)
To: Ken'ichi Ohmichi; +Cc: Jay Lan, kexec
Hi,
* Ken'ichi Ohmichi [2008-08-18 16:19]:
> Bernhard Walle wrote:
> > * Ken'ichi Ohmichi [2008-08-05 21:07]:
> >> BTW, I'd like to know some conditions of this problem.
> >> So please let me know the makedumpfile commandline which you run.
> >> Ex. # makedumpfile -d 31 -x vmlinux /proc/vmcore dumpfile
> >
> > # makedumpfile -d 3 -D vmcore.sles11 vmcore.sles11.filtered
> >
> >> I doubt that makedumpfile cannot distinguish the pgtable correctly.
> >> I created the debugging patch. Please run makedumpfile-1.2.7 applied
> >> with it by '-D' option, and report the output.
> >> According to your kernel .config file, the output should contain
> >> "PAGETABLE_4L : ON".
> >
> > See the attachment.
>
> Thanks for the log.
> makedumpfile can distinguish the pgtable correctly.
>
> Can the crash utility translate the virtual address 0xa0007fff8f900000
> to physical address ? Please run the following subcommand on the crash
> utility.
>
> crash> vtop 0xa0007fff8f900000
crash> vtop 0xa0007fff8f900000
VIRTUAL PHYSICAL
a0007fff8f900000 (not mapped)
PAGE DIRECTORY: a000000100914000
PGD: a000000100914000 => 30030bc000
PUD: e0000030030bfff8 => 30030c0000
PMD: e0000030030c3e38 => 30030c4000
PTE: e0000030030c7200 => 0
But I guess that's normal with virtual memory maps:
$ zgrep VIRTUAL_M /proc/config.gz
CONFIG_VIRTUAL_MEM_MAP=y
Bernhard
--
Bernhard Walle, SUSE LINUX Products GmbH, Architecture Development
“Make everything as simple as possible, but not simpler.”
-- Albert Einstein
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: makedumpfile fails on SGI machine
2008-08-18 11:00 ` Bernhard Walle
@ 2008-08-19 12:14 ` Ken'ichi Ohmichi
2008-08-27 9:00 ` Ken'ichi Ohmichi
1 sibling, 0 replies; 22+ messages in thread
From: Ken'ichi Ohmichi @ 2008-08-19 12:14 UTC (permalink / raw)
To: Bernhard Walle; +Cc: Jay Lan, kexec
[-- Attachment #1: Type: text/plain, Size: 1371 bytes --]
Hi,
Bernhard Walle wrote:
>>> * Ken'ichi Ohmichi [2008-08-05 21:07]:
>>>> BTW, I'd like to know some conditions of this problem.
>>>> So please let me know the makedumpfile commandline which you run.
>>>> Ex. # makedumpfile -d 31 -x vmlinux /proc/vmcore dumpfile
>>> # makedumpfile -d 3 -D vmcore.sles11 vmcore.sles11.filtered
>>>
>>>> I doubt that makedumpfile cannot distinguish the pgtable correctly.
>>>> I created the debugging patch. Please run makedumpfile-1.2.7 applied
>>>> with it by '-D' option, and report the output.
>>>> According to your kernel .config file, the output should contain
>>>> "PAGETABLE_4L : ON".
>>> See the attachment.
>> Thanks for the log.
>> makedumpfile can distinguish the pgtable correctly.
>>
>> Can the crash utility translate the virtual address 0xa0007fff8f900000
>> to physical address ? Please run the following subcommand on the crash
>> utility.
>>
>> crash> vtop 0xa0007fff8f900000
>
> crash> vtop 0xa0007fff8f900000
> VIRTUAL PHYSICAL
> a0007fff8f900000 (not mapped)
>
> PAGE DIRECTORY: a000000100914000
> PGD: a000000100914000 => 30030bc000
> PUD: e0000030030bfff8 => 30030c0000
> PMD: e0000030030c3e38 => 30030c4000
> PTE: e0000030030c7200 => 0
Thank you for the report :-)
I'll compare the vtop logic of the crash utility with the one of makedumpfile.
Thanks
Ken'ichi Ohmichi
[-- Attachment #2: Type: text/plain, Size: 143 bytes --]
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: makedumpfile fails on SGI machine
2008-08-18 11:00 ` Bernhard Walle
2008-08-19 12:14 ` Ken'ichi Ohmichi
@ 2008-08-27 9:00 ` Ken'ichi Ohmichi
2008-08-28 1:43 ` Jay Lan
1 sibling, 1 reply; 22+ messages in thread
From: Ken'ichi Ohmichi @ 2008-08-27 9:00 UTC (permalink / raw)
To: Bernhard Walle; +Cc: Jay Lan, kexec
[-- Attachment #1: Type: text/plain, Size: 4935 bytes --]
Hi Bernhard,
Bernhard Walle wrote:
>>> * Ken'ichi Ohmichi [2008-08-05 21:07]:
>>>> BTW, I'd like to know some conditions of this problem.
>>>> So please let me know the makedumpfile commandline which you run.
>>>> Ex. # makedumpfile -d 31 -x vmlinux /proc/vmcore dumpfile
>>> # makedumpfile -d 3 -D vmcore.sles11 vmcore.sles11.filtered
>>>
>>>> I doubt that makedumpfile cannot distinguish the pgtable correctly.
>>>> I created the debugging patch. Please run makedumpfile-1.2.7 applied
>>>> with it by '-D' option, and report the output.
>>>> According to your kernel .config file, the output should contain
>>>> "PAGETABLE_4L : ON".
>>> See the attachment.
>> Thanks for the log.
>> makedumpfile can distinguish the pgtable correctly.
>>
>> Can the crash utility translate the virtual address 0xa0007fff8f900000
>> to physical address ? Please run the following subcommand on the crash
>> utility.
>>
>> crash> vtop 0xa0007fff8f900000
>
> crash> vtop 0xa0007fff8f900000
> VIRTUAL PHYSICAL
> a0007fff8f900000 (not mapped)
>
> PAGE DIRECTORY: a000000100914000
> PGD: a000000100914000 => 30030bc000
> PUD: e0000030030bfff8 => 30030c0000
> PMD: e0000030030c3e38 => 30030c4000
> PTE: e0000030030c7200 => 0
>
>
> But I guess that's normal with virtual memory maps:
>
> $ zgrep VIRTUAL_M /proc/config.gz
> CONFIG_VIRTUAL_MEM_MAP=y
Thank you for your help.
I found an ia64 discontigmem kernel problem that the 'pgdat_list.node_mem_map'
has an unexpected value, and I created the attached patch for avoiding the
problem. If applying this patch, makedumpfile takes mem_map's information
from a symbol 'vmem_map' instead of 'pgdat_list.node_mem_map'.
It is for makedumpfile-1.2.8. Could you please test it ?
Note:
This solution needs a symbol 'vmem_map', but vmcoreinfo data in /proc/vmcore
does not contain it. So "-x" option is necessary for running makedumpfile
like the following.
# makedumpfile -c -d31 -x vmlinux /proc/vmcore dumpfile
Thanks
Ken'ichi Ohmichi
diff -puN backup/v1.2.8/makedumpfile.c makedumpfile/makedumpfile.c
--- backup/v1.2.8/makedumpfile.c 2008-08-12 12:17:24.000000000 +0900
+++ makedumpfile/makedumpfile.c 2008-08-28 02:07:47.000000000 +0900
@@ -1819,6 +1819,7 @@ get_symbol_info()
* Get symbol info.
*/
SYMBOL_INIT(mem_map, "mem_map");
+ SYMBOL_INIT(vmem_map, "vmem_map");
SYMBOL_INIT(mem_section, "mem_section");
SYMBOL_INIT(pkmap_count, "pkmap_count");
SYMBOL_INIT_NEXT(pkmap_count_next, "pkmap_count");
@@ -2110,6 +2111,7 @@ generate_vmcoreinfo()
* write the symbol of 1st kernel
*/
WRITE_SYMBOL("mem_map", mem_map);
+ WRITE_SYMBOL("vmem_map", vmem_map);
WRITE_SYMBOL("mem_section", mem_section);
WRITE_SYMBOL("pkmap_count", pkmap_count);
WRITE_SYMBOL("pkmap_count_next", pkmap_count_next);
@@ -2350,6 +2352,7 @@ read_vmcoreinfo()
return FALSE;
READ_SYMBOL("mem_map", mem_map);
+ READ_SYMBOL("vmem_map", vmem_map);
READ_SYMBOL("mem_section", mem_section);
READ_SYMBOL("pkmap_count", pkmap_count);
READ_SYMBOL("pkmap_count_next", pkmap_count_next);
@@ -2912,6 +2915,7 @@ get_mm_discontigmem()
{
int i, j, id_mm, node, num_mem_map, separate_mm = FALSE;
unsigned long pgdat, mem_map, pfn_start, pfn_end, node_spanned_pages;
+ unsigned long vmem_map;
struct mem_map_data temp_mmd;
num_mem_map = get_num_mm_discontigmem();
@@ -2924,6 +2928,13 @@ get_mm_discontigmem()
separate_mm = TRUE;
}
+ if (SYMBOL(vmem_map) != NOT_FOUND_SYMBOL) {
+ if (!readmem(VADDR, SYMBOL(vmem_map), &vmem_map, sizeof vmem_map)) {
+ ERRMSG("Can't get vmem_map.\n");
+ return FALSE;
+ }
+ }
+
/*
* Get the first node_id.
*/
@@ -2937,11 +2948,6 @@ get_mm_discontigmem()
}
id_mm = 0;
for (i = 0; i < vt.numnodes; i++) {
- if (!readmem(VADDR, pgdat + OFFSET(pglist_data.node_mem_map),
- &mem_map, sizeof mem_map)) {
- ERRMSG("Can't get mem_map.\n");
- return FALSE;
- }
if (!readmem(VADDR, pgdat + OFFSET(pglist_data.node_start_pfn),
&pfn_start, sizeof pfn_start)) {
ERRMSG("Can't get node_start_pfn.\n");
@@ -2954,6 +2960,15 @@ get_mm_discontigmem()
}
pfn_end = pfn_start + node_spanned_pages;
+ if (SYMBOL(vmem_map) == NOT_FOUND_SYMBOL) {
+ if (!readmem(VADDR, pgdat + OFFSET(pglist_data.node_mem_map),
+ &mem_map, sizeof mem_map)) {
+ ERRMSG("Can't get mem_map.\n");
+ return FALSE;
+ }
+ } else
+ mem_map = vmem_map + SIZE(page) * pfn_start;
+
if (separate_mm) {
/*
* For some ia64 NUMA systems.
diff -puN backup/v1.2.8/makedumpfile.h makedumpfile/makedumpfile.h
--- backup/v1.2.8/makedumpfile.h 2008-08-12 12:17:24.000000000 +0900
+++ makedumpfile/makedumpfile.h 2008-08-28 02:06:40.000000000 +0900
@@ -814,6 +814,7 @@ extern struct vm_table vt;
struct symbol_table {
unsigned long long mem_map;
+ unsigned long long vmem_map;
unsigned long long mem_section;
unsigned long long pkmap_count;
unsigned long long pkmap_count_next;
[-- Attachment #2: Type: text/plain, Size: 143 bytes --]
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: makedumpfile fails on SGI machine
2008-08-27 9:00 ` Ken'ichi Ohmichi
@ 2008-08-28 1:43 ` Jay Lan
2008-08-28 4:33 ` Ken'ichi Ohmichi
2008-08-28 7:25 ` Bernhard Walle
0 siblings, 2 replies; 22+ messages in thread
From: Jay Lan @ 2008-08-28 1:43 UTC (permalink / raw)
To: Ken'ichi Ohmichi; +Cc: Bernhard Walle, kexec
[-- Attachment #1: Type: text/plain, Size: 5965 bytes --]
Ken'ichi Ohmichi wrote:
> Hi Bernhard,
>
> Bernhard Walle wrote:
>>>> * Ken'ichi Ohmichi [2008-08-05 21:07]:
>>>>> BTW, I'd like to know some conditions of this problem.
>>>>> So please let me know the makedumpfile commandline which you run.
>>>>> Ex. # makedumpfile -d 31 -x vmlinux /proc/vmcore dumpfile
>>>> # makedumpfile -d 3 -D vmcore.sles11 vmcore.sles11.filtered
>>>>
>>>>> I doubt that makedumpfile cannot distinguish the pgtable correctly.
>>>>> I created the debugging patch. Please run makedumpfile-1.2.7 applied
>>>>> with it by '-D' option, and report the output.
>>>>> According to your kernel .config file, the output should contain
>>>>> "PAGETABLE_4L : ON".
>>>> See the attachment.
>>> Thanks for the log.
>>> makedumpfile can distinguish the pgtable correctly.
>>>
>>> Can the crash utility translate the virtual address 0xa0007fff8f900000
>>> to physical address ? Please run the following subcommand on the crash
>>> utility.
>>>
>>> crash> vtop 0xa0007fff8f900000
>> crash> vtop 0xa0007fff8f900000
>> VIRTUAL PHYSICAL
>> a0007fff8f900000 (not mapped)
>>
>> PAGE DIRECTORY: a000000100914000
>> PGD: a000000100914000 => 30030bc000
>> PUD: e0000030030bfff8 => 30030c0000
>> PMD: e0000030030c3e38 => 30030c4000
>> PTE: e0000030030c7200 => 0
>>
>>
>> But I guess that's normal with virtual memory maps:
>>
>> $ zgrep VIRTUAL_M /proc/config.gz
>> CONFIG_VIRTUAL_MEM_MAP=y
>
> Thank you for your help.
>
> I found an ia64 discontigmem kernel problem that the 'pgdat_list.node_mem_map'
> has an unexpected value, and I created the attached patch for avoiding the
> problem. If applying this patch, makedumpfile takes mem_map's information
> from a symbol 'vmem_map' instead of 'pgdat_list.node_mem_map'.
> It is for makedumpfile-1.2.8. Could you please test it ?
>
> Note:
> This solution needs a symbol 'vmem_map', but vmcoreinfo data in /proc/vmcore
> does not contain it. So "-x" option is necessary for running makedumpfile
> like the following.
>
> # makedumpfile -c -d31 -x vmlinux /proc/vmcore dumpfile
Hi Ken'ichi,
Thanks for your patch!
I am wondering if the discontigmem kernel has a legitimate bug,
we probably should report it?
I tested your patch on a machine that used to fail in executing
'makedumpfile'. It now generated a dump file fine.
Running 4.0.7.1 crash against the dump file looked good!
I will test on other types machines later.
Thanks for your help (and Bernhard's) while i was chasing down
a nasty bug that panicked kdump kernel at boot with 2.6.27
kernel on an IA64 machine.
Regards,
- jay
>
>
> Thanks
> Ken'ichi Ohmichi
>
> diff -puN backup/v1.2.8/makedumpfile.c makedumpfile/makedumpfile.c
> --- backup/v1.2.8/makedumpfile.c 2008-08-12 12:17:24.000000000 +0900
> +++ makedumpfile/makedumpfile.c 2008-08-28 02:07:47.000000000 +0900
> @@ -1819,6 +1819,7 @@ get_symbol_info()
> * Get symbol info.
> */
> SYMBOL_INIT(mem_map, "mem_map");
> + SYMBOL_INIT(vmem_map, "vmem_map");
> SYMBOL_INIT(mem_section, "mem_section");
> SYMBOL_INIT(pkmap_count, "pkmap_count");
> SYMBOL_INIT_NEXT(pkmap_count_next, "pkmap_count");
> @@ -2110,6 +2111,7 @@ generate_vmcoreinfo()
> * write the symbol of 1st kernel
> */
> WRITE_SYMBOL("mem_map", mem_map);
> + WRITE_SYMBOL("vmem_map", vmem_map);
> WRITE_SYMBOL("mem_section", mem_section);
> WRITE_SYMBOL("pkmap_count", pkmap_count);
> WRITE_SYMBOL("pkmap_count_next", pkmap_count_next);
> @@ -2350,6 +2352,7 @@ read_vmcoreinfo()
> return FALSE;
>
> READ_SYMBOL("mem_map", mem_map);
> + READ_SYMBOL("vmem_map", vmem_map);
> READ_SYMBOL("mem_section", mem_section);
> READ_SYMBOL("pkmap_count", pkmap_count);
> READ_SYMBOL("pkmap_count_next", pkmap_count_next);
> @@ -2912,6 +2915,7 @@ get_mm_discontigmem()
> {
> int i, j, id_mm, node, num_mem_map, separate_mm = FALSE;
> unsigned long pgdat, mem_map, pfn_start, pfn_end, node_spanned_pages;
> + unsigned long vmem_map;
> struct mem_map_data temp_mmd;
>
> num_mem_map = get_num_mm_discontigmem();
> @@ -2924,6 +2928,13 @@ get_mm_discontigmem()
> separate_mm = TRUE;
> }
>
> + if (SYMBOL(vmem_map) != NOT_FOUND_SYMBOL) {
> + if (!readmem(VADDR, SYMBOL(vmem_map), &vmem_map, sizeof vmem_map)) {
> + ERRMSG("Can't get vmem_map.\n");
> + return FALSE;
> + }
> + }
> +
> /*
> * Get the first node_id.
> */
> @@ -2937,11 +2948,6 @@ get_mm_discontigmem()
> }
> id_mm = 0;
> for (i = 0; i < vt.numnodes; i++) {
> - if (!readmem(VADDR, pgdat + OFFSET(pglist_data.node_mem_map),
> - &mem_map, sizeof mem_map)) {
> - ERRMSG("Can't get mem_map.\n");
> - return FALSE;
> - }
> if (!readmem(VADDR, pgdat + OFFSET(pglist_data.node_start_pfn),
> &pfn_start, sizeof pfn_start)) {
> ERRMSG("Can't get node_start_pfn.\n");
> @@ -2954,6 +2960,15 @@ get_mm_discontigmem()
> }
> pfn_end = pfn_start + node_spanned_pages;
>
> + if (SYMBOL(vmem_map) == NOT_FOUND_SYMBOL) {
> + if (!readmem(VADDR, pgdat + OFFSET(pglist_data.node_mem_map),
> + &mem_map, sizeof mem_map)) {
> + ERRMSG("Can't get mem_map.\n");
> + return FALSE;
> + }
> + } else
> + mem_map = vmem_map + SIZE(page) * pfn_start;
> +
> if (separate_mm) {
> /*
> * For some ia64 NUMA systems.
> diff -puN backup/v1.2.8/makedumpfile.h makedumpfile/makedumpfile.h
> --- backup/v1.2.8/makedumpfile.h 2008-08-12 12:17:24.000000000 +0900
> +++ makedumpfile/makedumpfile.h 2008-08-28 02:06:40.000000000 +0900
> @@ -814,6 +814,7 @@ extern struct vm_table vt;
>
> struct symbol_table {
> unsigned long long mem_map;
> + unsigned long long vmem_map;
> unsigned long long mem_section;
> unsigned long long pkmap_count;
> unsigned long long pkmap_count_next;
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> kexec mailing list
> kexec@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/kexec
[-- Attachment #2: Type: text/plain, Size: 143 bytes --]
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: makedumpfile fails on SGI machine
2008-08-28 1:43 ` Jay Lan
@ 2008-08-28 4:33 ` Ken'ichi Ohmichi
2008-08-28 7:25 ` Bernhard Walle
1 sibling, 0 replies; 22+ messages in thread
From: Ken'ichi Ohmichi @ 2008-08-28 4:33 UTC (permalink / raw)
To: Jay Lan; +Cc: Bernhard Walle, kexec
[-- Attachment #1: Type: text/plain, Size: 1241 bytes --]
Hi Jay,
Jay Lan wrote:
>> I found an ia64 discontigmem kernel problem that the 'pgdat_list.node_mem_map'
>> has an unexpected value, and I created the attached patch for avoiding the
>> problem. If applying this patch, makedumpfile takes mem_map's information
>> from a symbol 'vmem_map' instead of 'pgdat_list.node_mem_map'.
>> It is for makedumpfile-1.2.8. Could you please test it ?
>>
>> Note:
>> This solution needs a symbol 'vmem_map', but vmcoreinfo data in /proc/vmcore
>> does not contain it. So "-x" option is necessary for running makedumpfile
>> like the following.
>>
>> # makedumpfile -c -d31 -x vmlinux /proc/vmcore dumpfile
>
> Hi Ken'ichi,
>
> Thanks for your patch!
>
> I am wondering if the discontigmem kernel has a legitimate bug,
> we probably should report it?
Yes, we should.
I'm investigating this problem more to report it.
> I tested your patch on a machine that used to fail in executing
> 'makedumpfile'. It now generated a dump file fine.
>
> Running 4.0.7.1 crash against the dump file looked good!
Thank you for your testing.
It is a good news to me, and I will merge the patch into the next
makedumpfile.
> I will test on other types machines later.
Thanks too.
Thanks
Ken'ichi Ohmichi
[-- Attachment #2: Type: text/plain, Size: 143 bytes --]
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: makedumpfile fails on SGI machine
2008-08-28 1:43 ` Jay Lan
2008-08-28 4:33 ` Ken'ichi Ohmichi
@ 2008-08-28 7:25 ` Bernhard Walle
2008-08-29 6:45 ` [PATCH][ia64] Fix the difference between node_mem_map and node_start_pfn. (Re: makedumpfile fails on SGI machine) Ken'ichi Ohmichi
1 sibling, 1 reply; 22+ messages in thread
From: Bernhard Walle @ 2008-08-28 7:25 UTC (permalink / raw)
To: Jay Lan; +Cc: Ken'ichi Ohmichi, kexec
Hi Ken'ichi Ohmichi,
* Jay Lan [2008-08-27 18:43]:
>
> Thanks for your patch!
>
> I am wondering if the discontigmem kernel has a legitimate bug,
> we probably should report it?
>
> I tested your patch on a machine that used to fail in executing
> 'makedumpfile'. It now generated a dump file fine.
thanks for the patch, I can also report that with the patch and with
vmlinux it works now. However, shouldn't we add that vmem_map to
VMCOREINFO of the kernel?
Thanks also Jay for testing!
Bernhard
--
Bernhard Walle, SUSE Linux Products GmbH, Architecture Development
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH][ia64] Fix the difference between node_mem_map and node_start_pfn. (Re: makedumpfile fails on SGI machine)
2008-08-28 7:25 ` Bernhard Walle
@ 2008-08-29 6:45 ` Ken'ichi Ohmichi
2008-08-29 16:54 ` Bernhard Walle
2008-08-29 18:14 ` Jay Lan
0 siblings, 2 replies; 22+ messages in thread
From: Ken'ichi Ohmichi @ 2008-08-29 6:45 UTC (permalink / raw)
To: Bernhard Walle, Jay Lan; +Cc: kexec
[-- Attachment #1: Type: text/plain, Size: 2743 bytes --]
Hi Bernhard, Jay,
Bernhard Walle wrote:
> Hi Ken'ichi Ohmichi,
>
> * Jay Lan [2008-08-27 18:43]:
>> Thanks for your patch!
>>
>> I am wondering if the discontigmem kernel has a legitimate bug,
>> we probably should report it?
>>
>> I tested your patch on a machine that used to fail in executing
>> 'makedumpfile'. It now generated a dump file fine.
>
> thanks for the patch, I can also report that with the patch and with
> vmlinux it works now.
Thank you for the report. It's a good news :-)
> However, shouldn't we add that vmem_map to VMCOREINFO of the kernel?
I think that we would rather fix the kernel bug than add vmem_map to
VMCOREINFO of the kernel. If fixing it, makedumpfile does not need
vmem_map.
The attached patch fixes the kernel bug, and makedumpfile can work without
'-x' option. I tested it on my ia64 none-NUMA machine, and it works fine.
Could you test the attached patch on your machine again ?
Thanks
Ken'ichi Ohmichi
---
[PATCH][ia64] Fix the difference between node_mem_map and node_start_pfn.
makedumpfile[1] cannot run on ia64 discontigmem kernel, because the member
node_mem_map of struct pgdat_list has invalid value. This patch fixes it.
node_start_pfn shows the start pfn of each node, and node_mem_map should
point 'struct page' of each node's node_start_pfn.
On my machine, node0's node_start_pfn shows 0x400 and its node_mem_map points
0xa0007fffbf000000. This address is the same as vmem_map, so the node_mem_map
points 'struct page' of pfn 0, even if its node_start_pfn shows 0x400.
The cause is due to the round down of min_pfn in count_node_pages().
This patch fixes it.
makedumpfile[1]: dump filtering command
https://sourceforge.net/projects/makedumpfile/
Signed-off-by: Ken'ichi Ohmichi <oomichi@mxs.nes.nec.co.jp>
---
--- a/arch/ia64/mm/discontig.c 2008-08-29 23:05:52.000000000 +0900
+++ b/arch/ia64/mm/discontig.c 2008-08-29 23:06:59.000000000 +0900
@@ -631,7 +631,6 @@ static __init int count_node_pages(unsig
(min(end, __pa(MAX_DMA_ADDRESS)) - start) >>PAGE_SHIFT;
#endif
start = GRANULEROUNDDOWN(start);
- start = ORDERROUNDDOWN(start);
end = GRANULEROUNDUP(end);
mem_data[node].max_pfn = max(mem_data[node].max_pfn,
end >> PAGE_SHIFT);
--- a/include/asm-ia64/meminit.h 2008-08-29 23:06:36.000000000 +0900
+++ b/include/asm-ia64/meminit.h 2008-08-29 23:06:48.000000000 +0900
@@ -47,7 +47,6 @@ extern int reserve_elfcorehdr(unsigned l
*/
#define GRANULEROUNDDOWN(n) ((n) & ~(IA64_GRANULE_SIZE-1))
#define GRANULEROUNDUP(n) (((n)+IA64_GRANULE_SIZE-1) & ~(IA64_GRANULE_SIZE-1))
-#define ORDERROUNDDOWN(n) ((n) & ~((PAGE_SIZE<<MAX_ORDER)-1))
#ifdef CONFIG_NUMA
extern void call_pernode_memory (unsigned long start, unsigned long len, void *func);
_
[-- Attachment #2: Type: text/plain, Size: 143 bytes --]
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH][ia64] Fix the difference between node_mem_map and node_start_pfn. (Re: makedumpfile fails on SGI machine)
2008-08-29 6:45 ` [PATCH][ia64] Fix the difference between node_mem_map and node_start_pfn. (Re: makedumpfile fails on SGI machine) Ken'ichi Ohmichi
@ 2008-08-29 16:54 ` Bernhard Walle
2008-09-01 2:13 ` Ken'ichi Ohmichi
2008-08-29 18:14 ` Jay Lan
1 sibling, 1 reply; 22+ messages in thread
From: Bernhard Walle @ 2008-08-29 16:54 UTC (permalink / raw)
To: Ken'ichi Ohmichi; +Cc: Jay Lan, kexec
Hi,
* Ken'ichi Ohmichi [2008-08-29 15:45]:
>
>
> > However, shouldn't we add that vmem_map to VMCOREINFO of the kernel?
>
> I think that we would rather fix the kernel bug than add vmem_map to
> VMCOREINFO of the kernel. If fixing it, makedumpfile does not need
> vmem_map.
>
> The attached patch fixes the kernel bug, and makedumpfile can work without
> '-x' option. I tested it on my ia64 none-NUMA machine, and it works fine.
> Could you test the attached patch on your machine again ?
Thanks for the patch! This works fine on my machine.
Bernhard
Bernhard
--
Bernhard Walle, SUSE Linux Products GmbH, Architecture Development
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH][ia64] Fix the difference between node_mem_map and node_start_pfn. (Re: makedumpfile fails on SGI machine)
2008-08-29 6:45 ` [PATCH][ia64] Fix the difference between node_mem_map and node_start_pfn. (Re: makedumpfile fails on SGI machine) Ken'ichi Ohmichi
2008-08-29 16:54 ` Bernhard Walle
@ 2008-08-29 18:14 ` Jay Lan
2008-08-29 20:12 ` Jay Lan
1 sibling, 1 reply; 22+ messages in thread
From: Jay Lan @ 2008-08-29 18:14 UTC (permalink / raw)
To: Ken'ichi Ohmichi; +Cc: Bernhard Walle, kexec
[-- Attachment #1: Type: text/plain, Size: 3816 bytes --]
Ken'ichi Ohmichi wrote:
> Hi Bernhard, Jay,
>
> Bernhard Walle wrote:
>> Hi Ken'ichi Ohmichi,
>>
>> * Jay Lan [2008-08-27 18:43]:
>>> Thanks for your patch!
>>>
>>> I am wondering if the discontigmem kernel has a legitimate bug,
>>> we probably should report it?
>>>
>>> I tested your patch on a machine that used to fail in executing
>>> 'makedumpfile'. It now generated a dump file fine.
>> thanks for the patch, I can also report that with the patch and with
>> vmlinux it works now.
>
> Thank you for the report. It's a good news :-)
>
>
>> However, shouldn't we add that vmem_map to VMCOREINFO of the kernel?
Hmm, it failed on a shub2 machine. (The previous on that worked was a
shub1 machine, an A3700. An A4700 is a shub2.) I assumed the warning
about kernel version 2.6.27 not supported was harmless?
a4700rac:~ # /bin/makedumpfile-1.2.7-0.2 -c -d31 -x
/boot/vmlinux-2.6.27-rc4-vanilla /proc/vmcore /diskdump/dumpfile
Can't distinguish the pgtable.
The kernel version is not supported.
The created dumpfile may be incomplete.
Excluding unnecessary pages : [ 0 %] readmem: Can't convert a
virtual address(a07ffff9df8f5800) to offset.
create_2nd_bitmap: Can't exclude unnecessary pages.
makedumpfile Failed.
a4700rac:~ #
I will try your kernel patch next.
Regards,
- jay
>
> I think that we would rather fix the kernel bug than add vmem_map to
> VMCOREINFO of the kernel. If fixing it, makedumpfile does not need
> vmem_map.
>
> The attached patch fixes the kernel bug, and makedumpfile can work without
> '-x' option. I tested it on my ia64 none-NUMA machine, and it works fine.
> Could you test the attached patch on your machine again ?
>
>
> Thanks
> Ken'ichi Ohmichi
>
> ---
> [PATCH][ia64] Fix the difference between node_mem_map and node_start_pfn.
>
> makedumpfile[1] cannot run on ia64 discontigmem kernel, because the member
> node_mem_map of struct pgdat_list has invalid value. This patch fixes it.
>
> node_start_pfn shows the start pfn of each node, and node_mem_map should
> point 'struct page' of each node's node_start_pfn.
> On my machine, node0's node_start_pfn shows 0x400 and its node_mem_map points
> 0xa0007fffbf000000. This address is the same as vmem_map, so the node_mem_map
> points 'struct page' of pfn 0, even if its node_start_pfn shows 0x400.
>
> The cause is due to the round down of min_pfn in count_node_pages().
> This patch fixes it.
>
>
> makedumpfile[1]: dump filtering command
> https://sourceforge.net/projects/makedumpfile/
>
> Signed-off-by: Ken'ichi Ohmichi <oomichi@mxs.nes.nec.co.jp>
> ---
> --- a/arch/ia64/mm/discontig.c 2008-08-29 23:05:52.000000000 +0900
> +++ b/arch/ia64/mm/discontig.c 2008-08-29 23:06:59.000000000 +0900
> @@ -631,7 +631,6 @@ static __init int count_node_pages(unsig
> (min(end, __pa(MAX_DMA_ADDRESS)) - start) >>PAGE_SHIFT;
> #endif
> start = GRANULEROUNDDOWN(start);
> - start = ORDERROUNDDOWN(start);
> end = GRANULEROUNDUP(end);
> mem_data[node].max_pfn = max(mem_data[node].max_pfn,
> end >> PAGE_SHIFT);
> --- a/include/asm-ia64/meminit.h 2008-08-29 23:06:36.000000000 +0900
> +++ b/include/asm-ia64/meminit.h 2008-08-29 23:06:48.000000000 +0900
> @@ -47,7 +47,6 @@ extern int reserve_elfcorehdr(unsigned l
> */
> #define GRANULEROUNDDOWN(n) ((n) & ~(IA64_GRANULE_SIZE-1))
> #define GRANULEROUNDUP(n) (((n)+IA64_GRANULE_SIZE-1) & ~(IA64_GRANULE_SIZE-1))
> -#define ORDERROUNDDOWN(n) ((n) & ~((PAGE_SIZE<<MAX_ORDER)-1))
>
> #ifdef CONFIG_NUMA
> extern void call_pernode_memory (unsigned long start, unsigned long len, void *func);
> _
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> kexec mailing list
> kexec@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/kexec
[-- Attachment #2: Type: text/plain, Size: 143 bytes --]
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH][ia64] Fix the difference between node_mem_map and node_start_pfn. (Re: makedumpfile fails on SGI machine)
2008-08-29 18:14 ` Jay Lan
@ 2008-08-29 20:12 ` Jay Lan
2008-09-01 2:32 ` Ken'ichi Ohmichi
0 siblings, 1 reply; 22+ messages in thread
From: Jay Lan @ 2008-08-29 20:12 UTC (permalink / raw)
To: Ken'ichi Ohmichi; +Cc: Bernhard Walle, kexec
[-- Attachment #1: Type: text/plain, Size: 4569 bytes --]
Jay Lan wrote:
> Ken'ichi Ohmichi wrote:
>> Hi Bernhard, Jay,
>>
>> Bernhard Walle wrote:
>>> Hi Ken'ichi Ohmichi,
>>>
>>> * Jay Lan [2008-08-27 18:43]:
>>>> Thanks for your patch!
>>>>
>>>> I am wondering if the discontigmem kernel has a legitimate bug,
>>>> we probably should report it?
>>>>
>>>> I tested your patch on a machine that used to fail in executing
>>>> 'makedumpfile'. It now generated a dump file fine.
>>> thanks for the patch, I can also report that with the patch and with
>>> vmlinux it works now.
>> Thank you for the report. It's a good news :-)
>>
>>
>>> However, shouldn't we add that vmem_map to VMCOREINFO of the kernel?
>
> Hmm, it failed on a shub2 machine. (The previous on that worked was a
> shub1 machine, an A3700. An A4700 is a shub2.) I assumed the warning
> about kernel version 2.6.27 not supported was harmless?
>
> a4700rac:~ # /bin/makedumpfile-1.2.7-0.2 -c -d31 -x
> /boot/vmlinux-2.6.27-rc4-vanilla /proc/vmcore /diskdump/dumpfile
> Can't distinguish the pgtable.
> The kernel version is not supported.
> The created dumpfile may be incomplete.
> Excluding unnecessary pages : [ 0 %] readmem: Can't convert a
> virtual address(a07ffff9df8f5800) to offset.
> create_2nd_bitmap: Can't exclude unnecessary pages.
>
> makedumpfile Failed.
> a4700rac:~ #
Sorry, it was from makedumpfile-1.2.7-0.2. I should have used 1.2.8.
Here is another test. I used 2.6.26 kernel with your kernel patch
and 1.2.8 makedumpfile.
a4700rac:~ # /bin/makedumpfile-1.2.8 -c -d31 -D /proc/vmcore
/diskdump/dumpfile
LOAD (0)
phys_start : 6044000000
phys_end : 60447bd920
virt_start : a000000100000000
virt_end : a0000001007bd920
[bunch of other LOAD messages]
Linux kdump
max_mapnr : 2069efeb
num of NODEs : 33
Memory type : DISCONTIGMEM
mem_map (0)
mem_map : 0
pfn_start : 0
pfn_end : 600300
[bunch of other mem_map messages]
Copying data : [ 0 %]
Oops, the kdump kernel MCA'ed at this point! The system was rebooted.
But at least makedumpfile understood the /proc/vmcore.
I think MCA on copying data is a different issue. It MCA'ed even on
'cp /proc/vmcore /diskdump/vmcore' :(
- jay
>
> I will try your kernel patch next.
>
> Regards,
> - jay
>
>> I think that we would rather fix the kernel bug than add vmem_map to
>> VMCOREINFO of the kernel. If fixing it, makedumpfile does not need
>> vmem_map.
>>
>> The attached patch fixes the kernel bug, and makedumpfile can work without
>> '-x' option. I tested it on my ia64 none-NUMA machine, and it works fine.
>> Could you test the attached patch on your machine again ?
>>
>>
>> Thanks
>> Ken'ichi Ohmichi
>>
>> ---
>> [PATCH][ia64] Fix the difference between node_mem_map and node_start_pfn.
>>
>> makedumpfile[1] cannot run on ia64 discontigmem kernel, because the member
>> node_mem_map of struct pgdat_list has invalid value. This patch fixes it.
>>
>> node_start_pfn shows the start pfn of each node, and node_mem_map should
>> point 'struct page' of each node's node_start_pfn.
>> On my machine, node0's node_start_pfn shows 0x400 and its node_mem_map points
>> 0xa0007fffbf000000. This address is the same as vmem_map, so the node_mem_map
>> points 'struct page' of pfn 0, even if its node_start_pfn shows 0x400.
>>
>> The cause is due to the round down of min_pfn in count_node_pages().
>> This patch fixes it.
>>
>>
>> makedumpfile[1]: dump filtering command
>> https://sourceforge.net/projects/makedumpfile/
>>
>> Signed-off-by: Ken'ichi Ohmichi <oomichi@mxs.nes.nec.co.jp>
>> ---
>> --- a/arch/ia64/mm/discontig.c 2008-08-29 23:05:52.000000000 +0900
>> +++ b/arch/ia64/mm/discontig.c 2008-08-29 23:06:59.000000000 +0900
>> @@ -631,7 +631,6 @@ static __init int count_node_pages(unsig
>> (min(end, __pa(MAX_DMA_ADDRESS)) - start) >>PAGE_SHIFT;
>> #endif
>> start = GRANULEROUNDDOWN(start);
>> - start = ORDERROUNDDOWN(start);
>> end = GRANULEROUNDUP(end);
>> mem_data[node].max_pfn = max(mem_data[node].max_pfn,
>> end >> PAGE_SHIFT);
>> --- a/include/asm-ia64/meminit.h 2008-08-29 23:06:36.000000000 +0900
>> +++ b/include/asm-ia64/meminit.h 2008-08-29 23:06:48.000000000 +0900
>> @@ -47,7 +47,6 @@ extern int reserve_elfcorehdr(unsigned l
>> */
>> #define GRANULEROUNDDOWN(n) ((n) & ~(IA64_GRANULE_SIZE-1))
>> #define GRANULEROUNDUP(n) (((n)+IA64_GRANULE_SIZE-1) & ~(IA64_GRANULE_SIZE-1))
>> -#define ORDERROUNDDOWN(n) ((n) & ~((PAGE_SIZE<<MAX_ORDER)-1))
>>
>> #ifdef CONFIG_NUMA
>> extern void call_pernode_memory (unsigned long start, unsigned long len, void *func);
>> _
[-- Attachment #2: Type: text/plain, Size: 143 bytes --]
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH][ia64] Fix the difference between node_mem_map and node_start_pfn. (Re: makedumpfile fails on SGI machine)
2008-08-29 16:54 ` Bernhard Walle
@ 2008-09-01 2:13 ` Ken'ichi Ohmichi
0 siblings, 0 replies; 22+ messages in thread
From: Ken'ichi Ohmichi @ 2008-09-01 2:13 UTC (permalink / raw)
To: Bernhard Walle; +Cc: Jay Lan, kexec
[-- Attachment #1: Type: text/plain, Size: 632 bytes --]
Hi Bernhard,
Bernhard Walle wrote:
>>> However, shouldn't we add that vmem_map to VMCOREINFO of the kernel?
>> I think that we would rather fix the kernel bug than add vmem_map to
>> VMCOREINFO of the kernel. If fixing it, makedumpfile does not need
>> vmem_map.
>>
>> The attached patch fixes the kernel bug, and makedumpfile can work without
>> '-x' option. I tested it on my ia64 none-NUMA machine, and it works fine.
>> Could you test the attached patch on your machine again ?
>
> Thanks for the patch! This works fine on my machine.
Thank you for the testing !
I'll send this patch to linux-mm.
Thanks
Ken'ichi Ohmichi
[-- Attachment #2: Type: text/plain, Size: 143 bytes --]
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH][ia64] Fix the difference between node_mem_map and node_start_pfn. (Re: makedumpfile fails on SGI machine)
2008-08-29 20:12 ` Jay Lan
@ 2008-09-01 2:32 ` Ken'ichi Ohmichi
0 siblings, 0 replies; 22+ messages in thread
From: Ken'ichi Ohmichi @ 2008-09-01 2:32 UTC (permalink / raw)
To: Jay Lan; +Cc: Bernhard Walle, kexec
[-- Attachment #1: Type: text/plain, Size: 471 bytes --]
Hi Jay,
Jay Lan wrote:
> Copying data : [ 0 %]
>
> Oops, the kdump kernel MCA'ed at this point! The system was rebooted.
> But at least makedumpfile understood the /proc/vmcore.
Thank you for the test.
It is a good news that makedumpfile understood /proc/vmcore.
> I think MCA on copying data is a different issue. It MCA'ed even on
> 'cp /proc/vmcore /diskdump/vmcore' :(
I also think that is a different issue.
Thanks
Ken'ichi Ohmichi
[-- Attachment #2: Type: text/plain, Size: 143 bytes --]
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
^ permalink raw reply [flat|nested] 22+ messages in thread
end of thread, other threads:[~2008-09-01 3:14 UTC | newest]
Thread overview: 22+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-07-30 14:14 makedumpfile fails on SGI machine Bernhard Walle
2008-07-31 1:46 ` Ken'ichi Ohmichi
2008-07-31 8:47 ` Bernhard Walle
2008-07-31 10:25 ` Ken'ichi Ohmichi
2008-07-31 11:18 ` Bernhard Walle
2008-07-31 11:36 ` Ken'ichi Ohmichi
2008-07-31 11:38 ` Bernhard Walle
2008-08-05 12:07 ` Ken'ichi Ohmichi
2008-08-05 15:11 ` Bernhard Walle
2008-08-18 7:19 ` Ken'ichi Ohmichi
2008-08-18 11:00 ` Bernhard Walle
2008-08-19 12:14 ` Ken'ichi Ohmichi
2008-08-27 9:00 ` Ken'ichi Ohmichi
2008-08-28 1:43 ` Jay Lan
2008-08-28 4:33 ` Ken'ichi Ohmichi
2008-08-28 7:25 ` Bernhard Walle
2008-08-29 6:45 ` [PATCH][ia64] Fix the difference between node_mem_map and node_start_pfn. (Re: makedumpfile fails on SGI machine) Ken'ichi Ohmichi
2008-08-29 16:54 ` Bernhard Walle
2008-09-01 2:13 ` Ken'ichi Ohmichi
2008-08-29 18:14 ` Jay Lan
2008-08-29 20:12 ` Jay Lan
2008-09-01 2:32 ` Ken'ichi Ohmichi
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.