* PROBLEM: Kernel 2.6.26 oops if I unplug my Logitech USB 1.1 headset
@ 2008-09-04 23:05 Edgar Kalkowski
2008-09-05 0:28 ` Andrew Morton
0 siblings, 1 reply; 8+ messages in thread
From: Edgar Kalkowski @ 2008-09-04 23:05 UTC (permalink / raw)
To: linux-kernel
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Dear kernel hackers. ;)
[1.] One line summary of the problem: If I unplug my USB-Headset the kernel oopses.
[2.] Full description of the problem/report:
If I unplug the Logitech Headset, the kernel prints the following message to
/var/log/dmesg.log. I can unload the ehci module by executing "sudo rmmod
ehci_hcd" but "sudo rmmod uhci_hcd" blocks infinitely and thus I suppose the
Headset uses USB 1.1. "lsusb" shows the headset as
Bus 002 Device 004: ID 046d:0a01 Logitech, Inc. USB Headset
and I have no further information about the brand name or something. If I replug
the headset or any other usb device it is no longer recognized by the system.
I'm using a current arch linux install with KDE 4.1.1 on my Samsung R50 laptop.
The above data (except the oops message) was collected after a reboot with a
plugged in again and working headset.
The oops does not occur every time I unplug the headset but so far I have not
been able to determine how to trigger the oops. I have tried to plug and unplug
it a few times after a fresh reboot with no programs running but KDE and after
four or five plugs and unplugs the kernel oopsed.
I hope this bug report helps you guys a little and this bug get's fixed at some
time as it's quite annoying. ;)
[3.] Keywords (i.e., modules, networking, kernel): usb, usbcore, uhci_hcd,
kernel, module, oops, crash
[4.] Kernel version (from /proc/version): Linux version 2.6.26-ARCH
(root@T-POWA-LX) (gcc version 4.3.1 20080724 (prerelease) (GCC) ) #1 SMP PREEMPT
Tue Aug 26 21:15:43 UTC 2008
[5.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt)
usb 3-1: USB disconnect, address 2
BUG: unable to handle kernel paging request at 00100100
IP: [<f895f89d>] :snd:snd_ctl_dev_disconnect+0x5d/0x90
*pde = 00000000
Oops: 0000 [#1] PREEMPT SMP
Modules linked in: udf crc_itu_t michael_mic arc4 ecb ieee80211_crypt_tkip ipv6
radeon drm ntfs sdhci mmc_core pcspkr yenta_socket rsrc_nonstatic serio_raw
psmouse ohci1394 ieee1394 i2c_i801 i2c_core snd_usb_audio snd_usb_lib
snd_rawmidi snd_hwdep usb_storage video output intel_agp agpgart sg thermal fan
button battery ac cpufreq_ondemand acpi_cpufreq freq_table processor
snd_intel8x0m joydev snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device evdev
usblp snd_intel8x0 usbhid hid ff_memless snd_ac97_codec snd_pcm_oss snd_pcm
snd_timer snd_page_alloc snd_mixer_oss snd soundcore ac97_bus ipw2200 ieee80211
ieee80211_crypt b44 ssb pcmcia pcmcia_core firmware_class mii rtc_cmos rtc_core
rtc_lib ext3 jbd mbcache sr_mod sd_mod cdrom uhci_hcd ehci_hcd usbcore ata_piix
ata_generic pata_acpi libata scsi_mod dock
Pid: 764, comm: khubd Not tainted (2.6.26-ARCH #1)
EIP: 0060:[<f895f89d>] EFLAGS: 00010282 CPU: 0
EIP is at snd_ctl_dev_disconnect+0x5d/0x90 [snd]
EAX: 00000000 EBX: 00100100 ECX: 00020004 EDX: 0000001d
ESI: f70f0b70 EDI: f70f0a00 EBP: f70f0b4c ESP: f7063e30
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process khubd (pid: 764, ti=f7062000 task=f7bf87e0 task.ti=f7062000)
Stack: 00000000 f7b6a020 00000000 f70f0a00 f70f0b40 f8961e96 22222222 f7b6a020
f8961eea 00000000 f70f0a00 f70f0b8c 00000000 f895e1b8 22222222 f7b5de00
f7b5de00 f8b148c0 f7b952c0 f8b03c48 f70f0a00 f7b5de00 f8b148c0 f7b5de1c
Call Trace:
[<f8961e96>] snd_device_disconnect+0x66/0x90 [snd]
[<f8961eea>] snd_device_disconnect_all+0x2a/0x50 [snd]
[<f895e1b8>] snd_card_disconnect+0x148/0x1a0 [snd]
[<f8b03c48>] usb_audio_disconnect+0x58/0x140 [snd_usb_audio]
[<f88c1470>] usb_unbind_interface+0x50/0xa0 [usbcore]
[<c026a5b5>] __device_release_driver+0x75/0xc0
[<c026a6c0>] device_release_driver+0x20/0x40
[<c0269c2a>] bus_remove_device+0x8a/0xc0
[<c026868f>] device_del+0xef/0x150
[<f88be644>] usb_disable_device+0x84/0xf0 [usbcore]
[<f88ba180>] usb_disconnect+0xa0/0x140 [usbcore]
[<f88bad03>] hub_thread+0x313/0x1170 [usbcore]
[<c013f430>] autoremove_wake_function+0x0/0x50
[<f88ba9f0>] hub_thread+0x0/0x1170 [usbcore]
[<c013f149>] kthread+0x39/0x70
[<c013f110>] kthread+0x0/0x70
[<c0104c23>] kernel_thread_helper+0x7/0x14
=======================
Code: 18 b9 01 00 00 00 ba 03 00 00 00 c7 04 24 00 00 00 00 e8 c7 30 7c c7 8d 43
28 b9 04 0002 00 ba 1d 00 00 00 e8 a5 44 83 c7 8b 1b <8b> 03 0f 18 00 90 39 f3
75 c9 89 e8 e8 d2 3c 7e c7 89 fa 31 c0
EIP: [<f895f89d>] snd_ctl_dev_disconnect+0x5d/0x90 [snd] SS:ESP 0068:f7063e30
- ---[ end trace 05aa0b5534340422 ]---
[6.] A small shell script or example program which triggers the
problem (if possible)
[7.] Environment
[7.1.] Software (add the output of the ver_linux script here)
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux HEX 2.6.26-ARCH #1 SMP PREEMPT Tue Aug 26 21:15:43 UTC 2008 i686 Intel(R)
Pentium(R) M processor 1.73GHz GenuineIntel GNU/Linux
Gnu C 4.3.1
Gnu make 3.81
binutils 2.18.0.20080610
util-linux 2.14
mount support
module-init-tools 3.4
e2fsprogs 1.40.8
jfsutils 1.1.12
reiserfsprogs 3.6.20
xfsprogs 2.9.8
pcmciautils 014
PPP 2.4.4
Linux C Library 2.8
Dynamic linker (ldd) 2.8
Linux C++ Library so.6.0
Procps 3.2.7
Net-tools 1.60
Kbd 1.13
Sh-utils 6.12
udev 119
wireless-tools 29
Modules Loaded michael_mic arc4 ecb ieee80211_crypt_tkip
cpufreq_ondemand snd_usb_audio snd_usb_lib snd_rawmidi snd_hwdep ipv6 radeon drm
ntfs joydev pcspkr serio_raw psmouse i2c_i801 i2c_core usblp sdhci ohci1394
mmc_core ieee1394 yenta_socket rsrc_nonstatic usb_storage usbhid hid ff_memless
video output intel_agp agpgart sg thermal evdev fan button battery ac
acpi_cpufreq freq_table processor snd_intel8x0m snd_intel8x0 snd_ac97_codec
snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_pcm
snd_timer snd_page_alloc snd_mixer_oss snd soundcore ac97_bus ipw2200 ieee80211
ieee80211_crypt b44 ssb pcmcia pcmcia_core firmware_class mii rtc_cmos rtc_core
rtc_lib ext3 jbd mbcache sr_mod cdrom sd_mod ehci_hcd uhci_hcd usbcore ata_piix
ata_generic pata_acpi libata scsi_mod dock
[7.2.] Processor information (from /proc/cpuinfo):
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 13
model name : Intel(R) Pentium(R) M processor 1.73GHz
stepping : 8
cpu MHz : 1733.000
cache size : 2048 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat clflush dts acpi mmx fxsr sse sse2 ss tm pbe bts est tm2
bogomips : 3462.30
clflush size : 64
power management:
[7.3.] Module information (from /proc/modules):
michael_mic 4224 4 - Live 0xf8c4d000
arc4 3712 4 - Live 0xf8849000
ecb 4608 4 - Live 0xf8b65000
ieee80211_crypt_tkip 10752 2 - Live 0xf8c49000
cpufreq_ondemand 8716 1 - Live 0xf8c3c000
snd_usb_audio 81152 1 - Live 0xf94a0000
snd_usb_lib 17024 1 snd_usb_audio, Live 0xf8c50000
snd_rawmidi 21504 1 snd_usb_lib, Live 0xf8b16000
snd_hwdep 8964 1 snd_usb_audio, Live 0xf8b39000
ipv6 259684 63 - Live 0xf94d2000
radeon 137248 2 - Live 0xf8c60000
drm 73896 3 radeon, Live 0xf8b51000
ntfs 221664 1 - Live 0xf8b6a000
joydev 11584 0 - Live 0xf8b04000
pcspkr 4352 0 - Live 0xf8b01000
serio_raw 7044 0 - Live 0xf8acc000
psmouse 38288 0 - Live 0xf8b1d000
i2c_i801 10384 0 - Live 0xf8a93000
i2c_core 21140 1 i2c_i801, Live 0xf8b09000
usblp 13824 0 - Live 0xf8af0000
sdhci 16388 0 - Live 0xf8a8d000
ohci1394 30128 0 - Live 0xf8ae7000
mmc_core 43036 1 sdhci, Live 0xf8af5000
ieee1394 80696 1 ohci1394, Live 0xf8ab7000
yenta_socket 24972 1 - Live 0xf8aaf000
rsrc_nonstatic 12800 1 yenta_socket, Live 0xf8a88000
usb_storage 90560 1 - Live 0xf8acf000
usbhid 46016 0 - Live 0xf8aa2000
hid 40960 1 usbhid, Live 0xf8a97000
ff_memless 6664 1 usbhid, Live 0xf8a2b000
video 18064 0 - Live 0xf8a82000
output 4608 1 video, Live 0xf8a51000
intel_agp 26428 0 - Live 0xf8a67000
agpgart 29652 2 drm,intel_agp, Live 0xf8a79000
sg 28596 0 - Live 0xf8a71000
thermal 16796 0 - Live 0xf8a61000
evdev 10880 10 - Live 0xf8a56000
fan 6020 0 - Live 0xf8a2e000
button 7824 0 - Live 0xf8a1c000
battery 12036 0 - Live 0xf8a4d000
ac 6020 0 - Live 0xf8a22000
acpi_cpufreq 9228 0 - Live 0xf8a27000
freq_table 5568 2 cpufreq_ondemand,acpi_cpufreq, Live 0xf8a1f000
processor 33836 3 thermal,acpi_cpufreq, Live 0xf89a6000
snd_intel8x0m 15500 0 - Live 0xf89cf000
snd_intel8x0 30748 1 - Live 0xf8a13000
snd_ac97_codec 99748 2 snd_intel8x0m,snd_intel8x0, Live 0xf8a33000
snd_seq_oss 31872 0 - Live 0xf89b1000
snd_seq_midi_event 8192 1 snd_seq_oss, Live 0xf897d000
snd_seq 49968 4 snd_seq_oss,snd_seq_midi_event, Live 0xf8a05000
snd_seq_device 8332 3 snd_rawmidi,snd_seq_oss,snd_seq, Live 0xf8979000
snd_pcm_oss 40192 0 - Live 0xf895b000
snd_pcm 69636 5
snd_usb_audio,snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss, Live
0xf89bc000
snd_timer 21384 2 snd_seq,snd_pcm, Live 0xf8947000
snd_page_alloc 9608 3 snd_intel8x0m,snd_intel8x0,snd_pcm, Live 0xf8957000
snd_mixer_oss 16512 1 snd_pcm_oss, Live 0xf8916000
snd 50724 17
snd_usb_audio,snd_rawmidi,snd_hwdep,snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss,
Live 0xf8967000
soundcore 8032 1 snd, Live 0xf8944000
ac97_bus 3584 1 snd_ac97_codec, Live 0xf8822000
ipw2200 142408 0 - Live 0xf8982000
ieee80211 31176 1 ipw2200, Live 0xf894e000
ieee80211_crypt 6532 2 ieee80211_crypt_tkip,ieee80211, Live 0xf88e4000
b44 26512 0 - Live 0xf893c000
ssb 39684 1 b44, Live 0xf88f6000
pcmcia 34476 1 ssb, Live 0xf890c000
pcmcia_core 34708 4 yenta_socket,rsrc_nonstatic,ssb,pcmcia, Live 0xf8902000
firmware_class 9088 2 ipw2200,pcmcia, Live 0xf88dc000
mii 6528 1 b44, Live 0xf88d9000
rtc_cmos 11424 0 - Live 0xf888c000
rtc_core 17436 1 rtc_cmos, Live 0xf887c000
rtc_lib 4480 1 rtc_core, Live 0xf8846000
ext3 125704 3 - Live 0xf891c000
jbd 45716 1 ext3, Live 0xf88e9000
mbcache 8708 1 ext3, Live 0xf8842000
sr_mod 16836 0 - Live 0xf8876000
cdrom 36128 1 sr_mod, Live 0xf8882000
sd_mod 25240 7 - Live 0xf886e000
ehci_hcd 35596 0 - Live 0xf8864000
uhci_hcd 23952 0 - Live 0xf8831000
usbcore 132080 8
snd_usb_audio,snd_usb_lib,usblp,usb_storage,usbhid,ehci_hcd,uhci_hcd, Live
0xf88b7000
ata_piix 17924 4 - Live 0xf8839000
ata_generic 6788 0 - Live 0xf882e000
pata_acpi 6016 0 - Live 0xf882b000
libata 150048 3 ata_piix,ata_generic,pata_acpi, Live 0xf8891000
scsi_mod 95692 5 usb_storage,sg,sr_mod,sd_mod,libata, Live 0xf884b000
dock 9488 1 libata, Live 0xf8827000
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
$ cat /proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-0060 : keyboard
0064-0064 : keyboard
0070-0077 : rtc0
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : 0000:00:1f.1
0170-0177 : ata_piix
01f0-01f7 : 0000:00:1f.1
01f0-01f7 : ata_piix
0376-0376 : 0000:00:1f.1
0376-0376 : ata_piix
03c0-03df : vga+
03f6-03f6 : 0000:00:1f.1
03f6-03f6 : ata_piix
0680-06ff : pnp 00:06
0800-080f : pnp 00:06
0900-090f : pnp 00:06
0cf8-0cff : PCI conf1
1000-107f : 0000:00:1f.0
1000-107f : pnp 00:06
1000-1003 : ACPI PM1a_EVT_BLK
1004-1005 : ACPI PM1a_CNT_BLK
1008-100b : ACPI PM_TMR
1010-1015 : ACPI CPU throttle
1020-1020 : ACPI PM2_CNT_BLK
1028-102f : ACPI GPE0_BLK
1180-11bf : 0000:00:1f.0
1180-11bf : pnp 00:06
1640-164f : pnp 00:06
1800-181f : 0000:00:1d.0
1800-181f : uhci_hcd
1820-183f : 0000:00:1d.1
1820-183f : uhci_hcd
1840-185f : 0000:00:1d.2
1840-185f : uhci_hcd
1860-187f : 0000:00:1d.3
1860-187f : uhci_hcd
1880-18bf : 0000:00:1e.2
1880-18bf : Intel ICH6
18c0-18cf : 0000:00:1f.1
18c0-18cf : ata_piix
18e0-18ff : 0000:00:1f.3
18e0-18ff : i801_smbus
1c00-1cff : 0000:00:1e.2
1c00-1cff : Intel ICH6
2000-207f : 0000:00:1e.3
2000-207f : Intel ICH6 Modem
2400-24ff : 0000:00:1e.3
2400-24ff : Intel ICH6 Modem
3000-3fff : PCI Bus 0000:01
3000-30ff : 0000:01:00.0
4000-4fff : PCI Bus 0000:02
5000-5fff : PCI Bus 0000:06
5000-50ff : PCI CardBus 0000:07
5400-54ff : PCI CardBus 0000:07
$ cat /proc/iomem
00000000-0009f7ff : System RAM
0009f800-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000ce1ff : Video ROM
000d0000-000d3fff : Adapter ROM
000d4000-000d4fff : Adapter ROM
000f0000-000fffff : System ROM
00100000-3fe9ffff : System RAM
00100000-0031211d : Kernel code
0031211e-003cc37f : Kernel data
00415000-004e527f : Kernel bss
3fea0000-3feb0fff : ACPI Tables
3feb1000-3fefffff : ACPI Non-volatile Storage
3ff00000-3fffffff : reserved
50000000-53ffffff : PCI CardBus 0000:07
54000000-543fffff : PCI CardBus 0000:07
c0000000-c00003ff : 0000:00:1d.7
c0000000-c00003ff : ehci_hcd
c0000400-c00004ff : 0000:00:1e.2
c0000400-c00004ff : Intel ICH6
c0000800-c00009ff : 0000:00:1e.2
c0000800-c00009ff : Intel ICH6
c0100000-c01fffff : PCI Bus 0000:01
c0100000-c010ffff : 0000:01:00.0
c0120000-c013ffff : 0000:01:00.0
c4000000-c7ffffff : PCI Bus 0000:02
c8000000-c80fffff : PCI Bus 0000:06
c8000000-c8000fff : 0000:06:07.0
c8000000-c8000fff : ipw2200
c8001000-c80017ff : 0000:06:09.1
c8001000-c80017ff : ohci1394
c8001800-c80018ff : 0000:06:09.2
c8001800-c80018ff : mmc0
c8001c00-c8001cff : 0000:06:09.3
c8002000-c80020ff : 0000:06:09.4
c8003000-c8003fff : 0000:06:09.0
c8003000-c8003fff : yenta_socket
c8004000-c8005fff : 0000:06:05.0
c8004000-c8005fff : 0000:06:05.0
d0000000-d7ffffff : PCI Bus 0000:01
d0000000-d7ffffff : 0000:01:00.0
d8000000-dbffffff : PCI Bus 0000:02
e0000000-f0005fff : reserved
e0000000-efffffff : PCI MMCONFIG 0
f0008000-f000bfff : reserved
fed00000-fed003ff : HPET 0
fed00000-fed003ff : reserved
fed20000-fed8ffff : reserved
ff000000-ffffffff : reserved
[7.5.] PCI information ('lspci -vvv' as root)
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express
Processor to DRAM Controller (rev 03)
Subsystem: Samsung Electronics Co Ltd Device b035
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information <?>
Kernel modules: intel-agp
00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root
Port (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: c0100000-c01fffff
Prefetchable memory behind bridge: d0000000-d7ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [88] Subsystem: Samsung Electronics Co Ltd Device b035
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable-
Address: 00000000 Data: 0000
Capabilities: [a0] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1
<1us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency
L0 <256ns, L1 <4us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain-
CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
Surpise-
Slot # 1, PowerLimit 75.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
Interlock-
Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100] Virtual Channel <?>
Capabilities: [140] Root Complex Link <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI
Express Port 1 (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: c4000000-c7ffffff
Prefetchable memory behind bridge: 00000000d8000000-00000000dbffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
unlimited, L1 unlimited
ExtTag+ RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency
L0 <1us, L1 <4us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+
Surpise+
Slot # 2, PowerLimit 6.500000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq-
LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power-
Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet-
Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Samsung Electronics Co Ltd Device b035
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Device b035
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 1800 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Device b035
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Device b035
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #4 (rev 03) (prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Device b035
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI])
Subsystem: Samsung Electronics Co Ltd Device b035
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3) (prog-if
01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=06, subordinate=0a, sec-latency=32
I/O behind bridge: 00005000-00005fff
Memory behind bridge: c8000000-c80fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Gammagraphx, Inc. Device 0000
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW
(ICH6 Family) AC'97 Audio Controller (rev 03)
Subsystem: Samsung Electronics Co Ltd Device b035
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 1c00 [size=256]
Region 1: I/O ports at 1880 [size=64]
Region 2: Memory at c0000800 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at c0000400 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: Intel ICH
Kernel modules: snd-intel8x0
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem
Controller (rev 03) (prog-if 00 [Generic])
Subsystem: Samsung Electronics Co Ltd Device 2115
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 20
Region 0: I/O ports at 2400 [size=256]
Region 1: I/O ports at 2000 [size=128]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: Intel ICH Modem
Kernel modules: snd-intel8x0m
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
Subsystem: Samsung Electronics Co Ltd Device b035
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel modules: intel-rng
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE
Controller (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Samsung Electronics Co Ltd Device b035
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 18c0 [size=16]
Kernel driver in use: ata_piix
Kernel modules: ata_piix, piix
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus
Controller (rev 03)
Subsystem: Samsung Electronics Co Ltd Device b035
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 18e0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility X700
(PCIE) (prog-if 00 [VGA controller])
Subsystem: Samsung Electronics Co Ltd Device e003
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 3000 [size=256]
Region 2: Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at c0120000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns,
L1 <4us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency
L0 <256ns, L1 <2us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain-
CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [100] Advanced Error Reporting <?>
06:05.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
Subsystem: Samsung Electronics Co Ltd Device b035
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 22
Region 0: Memory at c8004000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: b44
Kernel modules: b44
06:07.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network
Connection (rev 05)
Subsystem: Intel Corporation Samsung P35 integrated WLAN
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (750ns min, 6000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at c8000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Kernel driver in use: ipw2200
Kernel modules: ipw2200
06:09.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
Subsystem: Samsung Electronics Co Ltd Device b035
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 16
Region 0: Memory at c8003000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176
Memory window 0: 54000000-543ff000 (prefetchable)
Memory window 1: 50000000-53fff000
I/O window 0: 00005000-000050ff
I/O window 1: 00005400-000054ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
06:09.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08)
(prog-if 10 [OHCI])
Subsystem: Samsung Electronics Co Ltd Device b035
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin B routed to IRQ 17
Region 0: Memory at c8001000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME+
Kernel driver in use: ohci1394
Kernel modules: ohci1394
06:09.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host
Adapter (rev 17)
Subsystem: Samsung Electronics Co Ltd Device b035
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin C routed to IRQ 18
Region 0: Memory at c8001800 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: sdhci
Kernel modules: sdhci
06:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter
(rev 08)
Subsystem: Samsung Electronics Co Ltd Device b035
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 255
Region 0: Memory at c8001c00 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
06:09.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 03)
Subsystem: Samsung Electronics Co Ltd Device b035
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 255
Region 0: Memory at c8002000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
[7.6.] SCSI information (from /proc/scsi/scsi)
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: SAMSUNG HM120JC Rev: YL10
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: TEAC Model: DV-W28EA Rev: S.0A
Type: CD-ROM ANSI SCSI revision: 05
Host: scsi2 Channel: 00 Id: 00 Lun: 00
Vendor: WDC WD25 Model: 00BB-00GUC0 Rev: 0811
Type: Direct-Access ANSI SCSI revision: 00
Host: scsi3 Channel: 00 Id: 00 Lun: 00
Vendor: HDT72252 Model: 5DLAT80 Rev: V44O
Type: Direct-Access ANSI SCSI revision: 00
[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you
think to be relevant):
I hope this helps you fix my problem. :)
Edgar Kalkowski
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iEYEARECAAYFAkjAaasACgkQ6s03tsVZHYGergCdFFqvhSRKhTO7zkyBDaMwU+20
ge0An2GoI9GBF16OBpKOkN+2y/TrAzG6
=feLy
-----END PGP SIGNATURE-----
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: PROBLEM: Kernel 2.6.26 oops if I unplug my Logitech USB 1.1 headset
2008-09-04 23:05 PROBLEM: Kernel 2.6.26 oops if I unplug my Logitech USB 1.1 headset Edgar Kalkowski
@ 2008-09-05 0:28 ` Andrew Morton
2008-09-05 7:09 ` Takashi Iwai
0 siblings, 1 reply; 8+ messages in thread
From: Andrew Morton @ 2008-09-05 0:28 UTC (permalink / raw)
To: Edgar Kalkowski; +Cc: linux-kernel, linux-usb, Takashi Iwai
On Fri, 05 Sep 2008 01:05:21 +0200
Edgar Kalkowski <eMail@edgar-kalkowski.de> wrote:
> Dear kernel hackers. ;)
>
> [1.] One line summary of the problem: If I unplug my USB-Headset the kernel oopses.
cc's added.
Might be USB, might be ALSA.
> [2.] Full description of the problem/report:
> If I unplug the Logitech Headset, the kernel prints the following message to
> /var/log/dmesg.log. I can unload the ehci module by executing "sudo rmmod
> ehci_hcd" but "sudo rmmod uhci_hcd" blocks infinitely and thus I suppose the
> Headset uses USB 1.1. "lsusb" shows the headset as
>
> Bus 002 Device 004: ID 046d:0a01 Logitech, Inc. USB Headset
>
> and I have no further information about the brand name or something. If I replug
> the headset or any other usb device it is no longer recognized by the system.
> I'm using a current arch linux install with KDE 4.1.1 on my Samsung R50 laptop.
> The above data (except the oops message) was collected after a reboot with a
> plugged in again and working headset.
>
> The oops does not occur every time I unplug the headset but so far I have not
> been able to determine how to trigger the oops. I have tried to plug and unplug
> it a few times after a fresh reboot with no programs running but KDE and after
> four or five plugs and unplugs the kernel oopsed.
>
> I hope this bug report helps you guys a little and this bug get's fixed at some
> time as it's quite annoying. ;)
>
> [3.] Keywords (i.e., modules, networking, kernel): usb, usbcore, uhci_hcd,
> kernel, module, oops, crash
>
> [4.] Kernel version (from /proc/version): Linux version 2.6.26-ARCH
> (root@T-POWA-LX) (gcc version 4.3.1 20080724 (prerelease) (GCC) ) #1 SMP PREEMPT
> Tue Aug 26 21:15:43 UTC 2008
>
> [5.] Output of Oops.. message (if applicable) with symbolic information
> resolved (see Documentation/oops-tracing.txt)
>
> usb 3-1: USB disconnect, address 2
> BUG: unable to handle kernel paging request at 00100100
> IP: [<f895f89d>] :snd:snd_ctl_dev_disconnect+0x5d/0x90
> *pde = 00000000
> Oops: 0000 [#1] PREEMPT SMP
> Modules linked in: udf crc_itu_t michael_mic arc4 ecb ieee80211_crypt_tkip ipv6
> radeon drm ntfs sdhci mmc_core pcspkr yenta_socket rsrc_nonstatic serio_raw
> psmouse ohci1394 ieee1394 i2c_i801 i2c_core snd_usb_audio snd_usb_lib
> snd_rawmidi snd_hwdep usb_storage video output intel_agp agpgart sg thermal fan
> button battery ac cpufreq_ondemand acpi_cpufreq freq_table processor
> snd_intel8x0m joydev snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device evdev
> usblp snd_intel8x0 usbhid hid ff_memless snd_ac97_codec snd_pcm_oss snd_pcm
> snd_timer snd_page_alloc snd_mixer_oss snd soundcore ac97_bus ipw2200 ieee80211
> ieee80211_crypt b44 ssb pcmcia pcmcia_core firmware_class mii rtc_cmos rtc_core
> rtc_lib ext3 jbd mbcache sr_mod sd_mod cdrom uhci_hcd ehci_hcd usbcore ata_piix
> ata_generic pata_acpi libata scsi_mod dock
>
> Pid: 764, comm: khubd Not tainted (2.6.26-ARCH #1)
> EIP: 0060:[<f895f89d>] EFLAGS: 00010282 CPU: 0
> EIP is at snd_ctl_dev_disconnect+0x5d/0x90 [snd]
> EAX: 00000000 EBX: 00100100 ECX: 00020004 EDX: 0000001d
> ESI: f70f0b70 EDI: f70f0a00 EBP: f70f0b4c ESP: f7063e30
> DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
> Process khubd (pid: 764, ti=f7062000 task=f7bf87e0 task.ti=f7062000)
> Stack: 00000000 f7b6a020 00000000 f70f0a00 f70f0b40 f8961e96 22222222 f7b6a020
> f8961eea 00000000 f70f0a00 f70f0b8c 00000000 f895e1b8 22222222 f7b5de00
> f7b5de00 f8b148c0 f7b952c0 f8b03c48 f70f0a00 f7b5de00 f8b148c0 f7b5de1c
> Call Trace:
> [<f8961e96>] snd_device_disconnect+0x66/0x90 [snd]
> [<f8961eea>] snd_device_disconnect_all+0x2a/0x50 [snd]
> [<f895e1b8>] snd_card_disconnect+0x148/0x1a0 [snd]
> [<f8b03c48>] usb_audio_disconnect+0x58/0x140 [snd_usb_audio]
> [<f88c1470>] usb_unbind_interface+0x50/0xa0 [usbcore]
> [<c026a5b5>] __device_release_driver+0x75/0xc0
> [<c026a6c0>] device_release_driver+0x20/0x40
> [<c0269c2a>] bus_remove_device+0x8a/0xc0
> [<c026868f>] device_del+0xef/0x150
> [<f88be644>] usb_disable_device+0x84/0xf0 [usbcore]
> [<f88ba180>] usb_disconnect+0xa0/0x140 [usbcore]
> [<f88bad03>] hub_thread+0x313/0x1170 [usbcore]
> [<c013f430>] autoremove_wake_function+0x0/0x50
> [<f88ba9f0>] hub_thread+0x0/0x1170 [usbcore]
> [<c013f149>] kthread+0x39/0x70
> [<c013f110>] kthread+0x0/0x70
> [<c0104c23>] kernel_thread_helper+0x7/0x14
> =======================
> Code: 18 b9 01 00 00 00 ba 03 00 00 00 c7 04 24 00 00 00 00 e8 c7 30 7c c7 8d 43
> 28 b9 04 0002 00 ba 1d 00 00 00 e8 a5 44 83 c7 8b 1b <8b> 03 0f 18 00 90 39 f3
> 75 c9 89 e8 e8 d2 3c 7e c7 89 fa 31 c0
> EIP: [<f895f89d>] snd_ctl_dev_disconnect+0x5d/0x90 [snd] SS:ESP 0068:f7063e30
> - ---[ end trace 05aa0b5534340422 ]---
>
> [6.] A small shell script or example program which triggers the
> problem (if possible)
>
> [7.] Environment
> [7.1.] Software (add the output of the ver_linux script here)
>
> If some fields are empty or look unusual you may have an old version.
>
> Compare to the current minimal requirements in Documentation/Changes.
>
>
>
> Linux HEX 2.6.26-ARCH #1 SMP PREEMPT Tue Aug 26 21:15:43 UTC 2008 i686 Intel(R)
> Pentium(R) M processor 1.73GHz GenuineIntel GNU/Linux
>
>
>
> Gnu C 4.3.1
>
> Gnu make 3.81
>
> binutils 2.18.0.20080610
>
> util-linux 2.14
>
> mount support
>
> module-init-tools 3.4
>
> e2fsprogs 1.40.8
>
> jfsutils 1.1.12
>
> reiserfsprogs 3.6.20
>
> xfsprogs 2.9.8
>
> pcmciautils 014
>
> PPP 2.4.4
>
> Linux C Library 2.8
>
> Dynamic linker (ldd) 2.8
>
> Linux C++ Library so.6.0
>
> Procps 3.2.7
>
> Net-tools 1.60
>
> Kbd 1.13
>
> Sh-utils 6.12
>
> udev 119
>
> wireless-tools 29
>
> Modules Loaded michael_mic arc4 ecb ieee80211_crypt_tkip
> cpufreq_ondemand snd_usb_audio snd_usb_lib snd_rawmidi snd_hwdep ipv6 radeon drm
> ntfs joydev pcspkr serio_raw psmouse i2c_i801 i2c_core usblp sdhci ohci1394
> mmc_core ieee1394 yenta_socket rsrc_nonstatic usb_storage usbhid hid ff_memless
> video output intel_agp agpgart sg thermal evdev fan button battery ac
> acpi_cpufreq freq_table processor snd_intel8x0m snd_intel8x0 snd_ac97_codec
> snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_pcm
> snd_timer snd_page_alloc snd_mixer_oss snd soundcore ac97_bus ipw2200 ieee80211
> ieee80211_crypt b44 ssb pcmcia pcmcia_core firmware_class mii rtc_cmos rtc_core
> rtc_lib ext3 jbd mbcache sr_mod cdrom sd_mod ehci_hcd uhci_hcd usbcore ata_piix
> ata_generic pata_acpi libata scsi_mod dock
>
> [7.2.] Processor information (from /proc/cpuinfo):
>
> processor : 0
>
> vendor_id : GenuineIntel
>
> cpu family : 6
> model : 13
> model name : Intel(R) Pentium(R) M processor 1.73GHz
> stepping : 8
> cpu MHz : 1733.000
> cache size : 2048 KB
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 2
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
> pat clflush dts acpi mmx fxsr sse sse2 ss tm pbe bts est tm2
> bogomips : 3462.30
> clflush size : 64
> power management:
>
> [7.3.] Module information (from /proc/modules):
>
> michael_mic 4224 4 - Live 0xf8c4d000
> arc4 3712 4 - Live 0xf8849000
> ecb 4608 4 - Live 0xf8b65000
> ieee80211_crypt_tkip 10752 2 - Live 0xf8c49000
> cpufreq_ondemand 8716 1 - Live 0xf8c3c000
> snd_usb_audio 81152 1 - Live 0xf94a0000
> snd_usb_lib 17024 1 snd_usb_audio, Live 0xf8c50000
> snd_rawmidi 21504 1 snd_usb_lib, Live 0xf8b16000
> snd_hwdep 8964 1 snd_usb_audio, Live 0xf8b39000
> ipv6 259684 63 - Live 0xf94d2000
> radeon 137248 2 - Live 0xf8c60000
> drm 73896 3 radeon, Live 0xf8b51000
> ntfs 221664 1 - Live 0xf8b6a000
> joydev 11584 0 - Live 0xf8b04000
> pcspkr 4352 0 - Live 0xf8b01000
> serio_raw 7044 0 - Live 0xf8acc000
> psmouse 38288 0 - Live 0xf8b1d000
> i2c_i801 10384 0 - Live 0xf8a93000
> i2c_core 21140 1 i2c_i801, Live 0xf8b09000
> usblp 13824 0 - Live 0xf8af0000
> sdhci 16388 0 - Live 0xf8a8d000
> ohci1394 30128 0 - Live 0xf8ae7000
> mmc_core 43036 1 sdhci, Live 0xf8af5000
> ieee1394 80696 1 ohci1394, Live 0xf8ab7000
> yenta_socket 24972 1 - Live 0xf8aaf000
> rsrc_nonstatic 12800 1 yenta_socket, Live 0xf8a88000
> usb_storage 90560 1 - Live 0xf8acf000
> usbhid 46016 0 - Live 0xf8aa2000
> hid 40960 1 usbhid, Live 0xf8a97000
> ff_memless 6664 1 usbhid, Live 0xf8a2b000
> video 18064 0 - Live 0xf8a82000
> output 4608 1 video, Live 0xf8a51000
> intel_agp 26428 0 - Live 0xf8a67000
> agpgart 29652 2 drm,intel_agp, Live 0xf8a79000
> sg 28596 0 - Live 0xf8a71000
> thermal 16796 0 - Live 0xf8a61000
> evdev 10880 10 - Live 0xf8a56000
> fan 6020 0 - Live 0xf8a2e000
> button 7824 0 - Live 0xf8a1c000
> battery 12036 0 - Live 0xf8a4d000
> ac 6020 0 - Live 0xf8a22000
> acpi_cpufreq 9228 0 - Live 0xf8a27000
> freq_table 5568 2 cpufreq_ondemand,acpi_cpufreq, Live 0xf8a1f000
> processor 33836 3 thermal,acpi_cpufreq, Live 0xf89a6000
> snd_intel8x0m 15500 0 - Live 0xf89cf000
> snd_intel8x0 30748 1 - Live 0xf8a13000
> snd_ac97_codec 99748 2 snd_intel8x0m,snd_intel8x0, Live 0xf8a33000
> snd_seq_oss 31872 0 - Live 0xf89b1000
> snd_seq_midi_event 8192 1 snd_seq_oss, Live 0xf897d000
> snd_seq 49968 4 snd_seq_oss,snd_seq_midi_event, Live 0xf8a05000
> snd_seq_device 8332 3 snd_rawmidi,snd_seq_oss,snd_seq, Live 0xf8979000
> snd_pcm_oss 40192 0 - Live 0xf895b000
> snd_pcm 69636 5
> snd_usb_audio,snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss, Live
> 0xf89bc000
>
> snd_timer 21384 2 snd_seq,snd_pcm, Live 0xf8947000
>
> snd_page_alloc 9608 3 snd_intel8x0m,snd_intel8x0,snd_pcm, Live 0xf8957000
>
> snd_mixer_oss 16512 1 snd_pcm_oss, Live 0xf8916000
>
> snd 50724 17
> snd_usb_audio,snd_rawmidi,snd_hwdep,snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss,
> Live 0xf8967000
> soundcore 8032 1 snd, Live 0xf8944000
>
> ac97_bus 3584 1 snd_ac97_codec, Live 0xf8822000
>
> ipw2200 142408 0 - Live 0xf8982000
>
> ieee80211 31176 1 ipw2200, Live 0xf894e000
>
> ieee80211_crypt 6532 2 ieee80211_crypt_tkip,ieee80211, Live 0xf88e4000
>
> b44 26512 0 - Live 0xf893c000
>
> ssb 39684 1 b44, Live 0xf88f6000
>
> pcmcia 34476 1 ssb, Live 0xf890c000
>
> pcmcia_core 34708 4 yenta_socket,rsrc_nonstatic,ssb,pcmcia, Live 0xf8902000
>
> firmware_class 9088 2 ipw2200,pcmcia, Live 0xf88dc000
>
> mii 6528 1 b44, Live 0xf88d9000
> rtc_cmos 11424 0 - Live 0xf888c000
> rtc_core 17436 1 rtc_cmos, Live 0xf887c000
> rtc_lib 4480 1 rtc_core, Live 0xf8846000
> ext3 125704 3 - Live 0xf891c000
> jbd 45716 1 ext3, Live 0xf88e9000
> mbcache 8708 1 ext3, Live 0xf8842000
> sr_mod 16836 0 - Live 0xf8876000
> cdrom 36128 1 sr_mod, Live 0xf8882000
> sd_mod 25240 7 - Live 0xf886e000
> ehci_hcd 35596 0 - Live 0xf8864000
> uhci_hcd 23952 0 - Live 0xf8831000
> usbcore 132080 8
> snd_usb_audio,snd_usb_lib,usblp,usb_storage,usbhid,ehci_hcd,uhci_hcd, Live
> 0xf88b7000
> ata_piix 17924 4 - Live 0xf8839000
> ata_generic 6788 0 - Live 0xf882e000
> pata_acpi 6016 0 - Live 0xf882b000
> libata 150048 3 ata_piix,ata_generic,pata_acpi, Live 0xf8891000
> scsi_mod 95692 5 usb_storage,sg,sr_mod,sd_mod,libata, Live 0xf884b000
> dock 9488 1 libata, Live 0xf8827000
>
> [7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
>
> $ cat /proc/ioports
>
> 0000-001f : dma1
>
> 0020-0021 : pic1
>
> 0040-0043 : timer0
>
> 0050-0053 : timer1
>
> 0060-0060 : keyboard
>
> 0064-0064 : keyboard
>
> 0070-0077 : rtc0
>
> 0080-008f : dma page reg
>
> 00a0-00a1 : pic2
>
> 00c0-00df : dma2
>
> 00f0-00ff : fpu
>
> 0170-0177 : 0000:00:1f.1
>
> 0170-0177 : ata_piix
>
> 01f0-01f7 : 0000:00:1f.1
>
> 01f0-01f7 : ata_piix
>
> 0376-0376 : 0000:00:1f.1
>
> 0376-0376 : ata_piix
>
> 03c0-03df : vga+
>
> 03f6-03f6 : 0000:00:1f.1
>
> 03f6-03f6 : ata_piix
>
> 0680-06ff : pnp 00:06
>
> 0800-080f : pnp 00:06
>
> 0900-090f : pnp 00:06
>
> 0cf8-0cff : PCI conf1
>
> 1000-107f : 0000:00:1f.0
>
> 1000-107f : pnp 00:06
>
> 1000-1003 : ACPI PM1a_EVT_BLK
>
> 1004-1005 : ACPI PM1a_CNT_BLK
>
> 1008-100b : ACPI PM_TMR
>
> 1010-1015 : ACPI CPU throttle
>
> 1020-1020 : ACPI PM2_CNT_BLK
>
> 1028-102f : ACPI GPE0_BLK
>
> 1180-11bf : 0000:00:1f.0
>
> 1180-11bf : pnp 00:06
>
> 1640-164f : pnp 00:06
>
> 1800-181f : 0000:00:1d.0
>
> 1800-181f : uhci_hcd
>
> 1820-183f : 0000:00:1d.1
>
> 1820-183f : uhci_hcd
>
> 1840-185f : 0000:00:1d.2
>
> 1840-185f : uhci_hcd
>
> 1860-187f : 0000:00:1d.3
> 1860-187f : uhci_hcd
> 1880-18bf : 0000:00:1e.2
> 1880-18bf : Intel ICH6
> 18c0-18cf : 0000:00:1f.1
> 18c0-18cf : ata_piix
> 18e0-18ff : 0000:00:1f.3
> 18e0-18ff : i801_smbus
> 1c00-1cff : 0000:00:1e.2
> 1c00-1cff : Intel ICH6
> 2000-207f : 0000:00:1e.3
> 2000-207f : Intel ICH6 Modem
> 2400-24ff : 0000:00:1e.3
> 2400-24ff : Intel ICH6 Modem
> 3000-3fff : PCI Bus 0000:01
> 3000-30ff : 0000:01:00.0
> 4000-4fff : PCI Bus 0000:02
> 5000-5fff : PCI Bus 0000:06
> 5000-50ff : PCI CardBus 0000:07
> 5400-54ff : PCI CardBus 0000:07
>
> $ cat /proc/iomem
>
> 00000000-0009f7ff : System RAM
> 0009f800-0009ffff : reserved
> 000a0000-000bffff : Video RAM area
> 000c0000-000ce1ff : Video ROM
> 000d0000-000d3fff : Adapter ROM
> 000d4000-000d4fff : Adapter ROM
> 000f0000-000fffff : System ROM
> 00100000-3fe9ffff : System RAM
> 00100000-0031211d : Kernel code
> 0031211e-003cc37f : Kernel data
> 00415000-004e527f : Kernel bss
> 3fea0000-3feb0fff : ACPI Tables
> 3feb1000-3fefffff : ACPI Non-volatile Storage
> 3ff00000-3fffffff : reserved
> 50000000-53ffffff : PCI CardBus 0000:07
> 54000000-543fffff : PCI CardBus 0000:07
> c0000000-c00003ff : 0000:00:1d.7
> c0000000-c00003ff : ehci_hcd
> c0000400-c00004ff : 0000:00:1e.2
> c0000400-c00004ff : Intel ICH6
> c0000800-c00009ff : 0000:00:1e.2
> c0000800-c00009ff : Intel ICH6
> c0100000-c01fffff : PCI Bus 0000:01
> c0100000-c010ffff : 0000:01:00.0
> c0120000-c013ffff : 0000:01:00.0
> c4000000-c7ffffff : PCI Bus 0000:02
> c8000000-c80fffff : PCI Bus 0000:06
> c8000000-c8000fff : 0000:06:07.0
> c8000000-c8000fff : ipw2200
> c8001000-c80017ff : 0000:06:09.1
> c8001000-c80017ff : ohci1394
> c8001800-c80018ff : 0000:06:09.2
> c8001800-c80018ff : mmc0
> c8001c00-c8001cff : 0000:06:09.3
> c8002000-c80020ff : 0000:06:09.4
> c8003000-c8003fff : 0000:06:09.0
> c8003000-c8003fff : yenta_socket
> c8004000-c8005fff : 0000:06:05.0
> c8004000-c8005fff : 0000:06:05.0
> d0000000-d7ffffff : PCI Bus 0000:01
> d0000000-d7ffffff : 0000:01:00.0
> d8000000-dbffffff : PCI Bus 0000:02
> e0000000-f0005fff : reserved
> e0000000-efffffff : PCI MMCONFIG 0
> f0008000-f000bfff : reserved
> fed00000-fed003ff : HPET 0
> fed00000-fed003ff : reserved
> fed20000-fed8ffff : reserved
> ff000000-ffffffff : reserved
>
> [7.5.] PCI information ('lspci -vvv' as root)
>
> 00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express
> Processor to DRAM Controller (rev 03)
>
> Subsystem: Samsung Electronics Co Ltd Device b035
>
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
>
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort+ >SERR- <PERR- INTx-
>
> Latency: 0
>
> Capabilities: [e0] Vendor Specific Information <?>
>
> Kernel modules: intel-agp
>
>
> 00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root
> Port (rev 03) (prog-if 00 [Normal decode])
>
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
>
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
>
> Latency: 0, Cache Line Size: 32 bytes
>
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>
> I/O behind bridge: 00003000-00003fff
>
> Memory behind bridge: c0100000-c01fffff
>
> Prefetchable memory behind bridge: d0000000-d7ffffff
>
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort+ <SERR- <PERR-
>
> BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
>
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>
> Capabilities: [88] Subsystem: Samsung Electronics Co Ltd Device b035
>
> Capabilities: [80] Power Management version 2
>
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
> Enable-
> Address: 00000000 Data: 0000
>
> Capabilities: [a0] Express (v1) Root Port (Slot+), MSI 00
>
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1
> <1us
> ExtTag- RBE- FLReset-
>
> DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
> Unsupported+
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>
> MaxPayload 128 bytes, MaxReadReq 128 bytes
>
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
> TransPend-
> LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency
> L0 <256ns, L1 <4us
>
> ClockPM- Suprise- LLActRep- BwNot-
>
> LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain-
> CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>
> LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
>
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
> Surpise-
> Slot # 1, PowerLimit 75.000000; Interlock- NoCompl-
>
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
> LinkChg-
> Control: AttnInd Off, PwrInd On, Power- Interlock-
>
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
> Interlock-
> Changed: MRL- PresDet+ LinkState-
>
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
> CRSVisible-
> RootCap: CRSVisible-
>
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>
> Capabilities: [100] Virtual Channel <?>
>
> Capabilities: [140] Root Complex Link <?>
>
> Kernel driver in use: pcieport-driver
>
> Kernel modules: shpchp
>
>
> 00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI
> Express Port 1 (rev 03) (prog-if 00 [Normal decode])
>
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
>
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
>
> Latency: 0, Cache Line Size: 32 bytes
>
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
>
> I/O behind bridge: 00004000-00004fff
>
> Memory behind bridge: c4000000-c7ffffff
>
> Prefetchable memory behind bridge: 00000000d8000000-00000000dbffffff
>
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- <SERR- <PERR-
>
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>
> Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
>
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> unlimited, L1 unlimited
>
> ExtTag+ RBE- FLReset-
>
> DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
> Unsupported+
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>
> MaxPayload 128 bytes, MaxReadReq 128 bytes
>
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
> TransPend-
> LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency
> L0 <1us, L1 <4us
>
> ClockPM- Suprise- LLActRep- BwNot-
>
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>
> LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
>
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+
> Surpise+
> Slot # 2, PowerLimit 6.500000; Interlock- NoCompl-
>
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq-
> LinkChg-
> Control: AttnInd Unknown, PwrInd Unknown, Power-
> Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet-
> Interlock-
> Changed: MRL- PresDet- LinkState-
>
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
> CRSVisible-
> RootCap: CRSVisible-
>
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>
> Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
> Enable-
> Address: 00000000 Data: 0000
>
> Capabilities: [90] Subsystem: Samsung Electronics Co Ltd Device b035
>
> Capabilities: [a0] Power Management version 2
>
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> Capabilities: [100] Virtual Channel <?>
>
> Capabilities: [180] Root Complex Link <?>
>
> Kernel driver in use: pcieport-driver
>
> Kernel modules: shpchp
>
>
> 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
> USB UHCI #1 (rev 03) (prog-if 00 [UHCI])
>
> Subsystem: Samsung Electronics Co Ltd Device b035
>
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
>
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> Latency: 0
>
> Interrupt: pin A routed to IRQ 23
>
> Region 4: I/O ports at 1800 [size=32]
>
> Kernel driver in use: uhci_hcd
>
> Kernel modules: uhci-hcd
>
>
> 00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
> USB UHCI #2 (rev 03) (prog-if 00 [UHCI])
>
> Subsystem: Samsung Electronics Co Ltd Device b035
>
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
>
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> Latency: 0
>
> Interrupt: pin B routed to IRQ 19
>
> Region 4: I/O ports at 1820 [size=32]
>
> Kernel driver in use: uhci_hcd
>
> Kernel modules: uhci-hcd
>
>
> 00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
> USB UHCI #3 (rev 03) (prog-if 00 [UHCI])
>
> Subsystem: Samsung Electronics Co Ltd Device b035
>
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
>
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> Latency: 0
>
> Interrupt: pin C routed to IRQ 18
>
> Region 4: I/O ports at 1840 [size=32]
>
> Kernel driver in use: uhci_hcd
>
> Kernel modules: uhci-hcd
>
>
> 00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
> USB UHCI #4 (rev 03) (prog-if 00 [UHCI])
>
> Subsystem: Samsung Electronics Co Ltd Device b035
>
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
>
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> Latency: 0
>
> Interrupt: pin D routed to IRQ 16
>
> Region 4: I/O ports at 1860 [size=32]
>
> Kernel driver in use: uhci_hcd
>
> Kernel modules: uhci-hcd
>
>
> 00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
> USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI])
>
> Subsystem: Samsung Electronics Co Ltd Device b035
>
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
>
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> Latency: 0
>
> Interrupt: pin A routed to IRQ 23
>
> Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=1K]
>
> Capabilities: [50] Power Management version 2
>
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> Capabilities: [58] Debug port: BAR=1 offset=00a0
>
> Kernel driver in use: ehci_hcd
>
> Kernel modules: ehci-hcd
>
>
> 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3) (prog-if
> 01 [Subtractive decode])
>
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
>
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
>
> Latency: 0
>
> Bus: primary=00, secondary=06, subordinate=0a, sec-latency=32
>
> I/O behind bridge: 00005000-00005fff
>
> Memory behind bridge: c8000000-c80fffff
>
> Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
>
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort+ <SERR- <PERR-
>
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>
> Capabilities: [50] Subsystem: Gammagraphx, Inc. Device 0000
>
>
> 00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW
> (ICH6 Family) AC'97 Audio Controller (rev 03)
>
> Subsystem: Samsung Electronics Co Ltd Device b035
>
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
>
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> Latency: 0
>
> Interrupt: pin A routed to IRQ 17
>
> Region 0: I/O ports at 1c00 [size=256]
>
> Region 1: I/O ports at 1880 [size=64]
>
> Region 2: Memory at c0000800 (32-bit, non-prefetchable) [size=512]
>
> Region 3: Memory at c0000400 (32-bit, non-prefetchable) [size=256]
>
> Capabilities: [50] Power Management version 2
>
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> Kernel driver in use: Intel ICH
>
> Kernel modules: snd-intel8x0
>
>
> 00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem
> Controller (rev 03) (prog-if 00 [Generic])
>
> Subsystem: Samsung Electronics Co Ltd Device 2115
>
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
>
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> Latency: 0
>
> Interrupt: pin B routed to IRQ 20
>
> Region 0: I/O ports at 2400 [size=256]
>
> Region 1: I/O ports at 2000 [size=128]
>
> Capabilities: [50] Power Management version 2
>
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> Kernel driver in use: Intel ICH Modem
>
> Kernel modules: snd-intel8x0m
>
>
> 00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
> Subsystem: Samsung Electronics Co Ltd Device b035
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
>
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> Latency: 0
>
> Kernel modules: intel-rng
>
>
> 00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE
> Controller (rev 03) (prog-if 8a [Master SecP PriP])
>
> Subsystem: Samsung Electronics Co Ltd Device b035
>
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
>
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> Latency: 0
>
> Interrupt: pin A routed to IRQ 18
>
> Region 0: I/O ports at 01f0 [size=8]
>
> Region 1: I/O ports at 03f4 [size=1]
>
> Region 2: I/O ports at 0170 [size=8]
>
> Region 3: I/O ports at 0374 [size=1]
>
> Region 4: I/O ports at 18c0 [size=16]
>
> Kernel driver in use: ata_piix
>
> Kernel modules: ata_piix, piix
>
>
> 00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus
> Controller (rev 03)
>
> Subsystem: Samsung Electronics Co Ltd Device b035
>
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
>
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> Interrupt: pin B routed to IRQ 19
>
> Region 4: I/O ports at 18e0 [size=32]
>
> Kernel driver in use: i801_smbus
>
> Kernel modules: i2c-i801
>
>
> 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility X700
> (PCIE) (prog-if 00 [VGA controller])
>
> Subsystem: Samsung Electronics Co Ltd Device e003
>
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
>
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
>
> Latency: 0, Cache Line Size: 32 bytes
>
> Interrupt: pin A routed to IRQ 16
>
> Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
>
> Region 1: I/O ports at 3000 [size=256]
>
> Region 2: Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
>
> [virtual] Expansion ROM at c0120000 [disabled] [size=128K]
>
> Capabilities: [50] Power Management version 2
>
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> Capabilities: [58] Express (v1) Endpoint, MSI 00
>
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns,
> L1 <4us
> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
>
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>
> MaxPayload 128 bytes, MaxReadReq 128 bytes
>
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
> TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency
> L0 <256ns, L1 <2us
>
> ClockPM- Suprise- LLActRep- BwNot-
>
> LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain-
> CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>
> LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
>
> Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
> Enable-
> Address: 0000000000000000 Data: 0000
>
> Capabilities: [100] Advanced Error Reporting <?>
>
>
> 06:05.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
> Subsystem: Samsung Electronics Co Ltd Device b035
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
>
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
>
> Latency: 32
>
> Interrupt: pin A routed to IRQ 22
>
> Region 0: Memory at c8004000 (32-bit, non-prefetchable) [size=8K]
>
> Capabilities: [40] Power Management version 2
>
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>
> Kernel driver in use: b44
>
> Kernel modules: b44
>
>
> 06:07.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network
> Connection (rev 05)
> Subsystem: Intel Corporation Samsung P35 integrated WLAN
>
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
>
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> Latency: 32 (750ns min, 6000ns max), Cache Line Size: 32 bytes
>
> Interrupt: pin A routed to IRQ 20
>
> Region 0: Memory at c8000000 (32-bit, non-prefetchable) [size=4K]
>
> Capabilities: [dc] Power Management version 2
>
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=1 PME-
>
> Kernel driver in use: ipw2200
>
> Kernel modules: ipw2200
>
>
> 06:09.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
> Subsystem: Samsung Electronics Co Ltd Device b035
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
>
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> Latency: 168
>
> Interrupt: pin A routed to IRQ 16
>
> Region 0: Memory at c8003000 (32-bit, non-prefetchable) [size=4K]
>
> Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176
>
> Memory window 0: 54000000-543ff000 (prefetchable)
>
> Memory window 1: 50000000-53fff000
>
> I/O window 0: 00005000-000050ff
>
> I/O window 1: 00005400-000054ff
>
> BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
>
> 16-bit legacy interface ports at 0001
>
> Kernel driver in use: yenta_cardbus
>
> Kernel modules: yenta_socket
>
>
> 06:09.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08)
> (prog-if 10 [OHCI])
>
> Subsystem: Samsung Electronics Co Ltd Device b035
>
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
>
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> Latency: 64 (500ns min, 1000ns max)
>
> Interrupt: pin B routed to IRQ 17
>
> Region 0: Memory at c8001000 (32-bit, non-prefetchable) [size=2K]
>
> Capabilities: [dc] Power Management version 2
>
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME+
>
> Kernel driver in use: ohci1394
>
> Kernel modules: ohci1394
>
>
> 06:09.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host
> Adapter (rev 17)
> Subsystem: Samsung Electronics Co Ltd Device b035
>
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
>
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> Latency: 32
>
> Interrupt: pin C routed to IRQ 18
>
> Region 0: Memory at c8001800 (32-bit, non-prefetchable) [size=256]
>
> Capabilities: [80] Power Management version 2
>
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>
> Kernel driver in use: sdhci
>
> Kernel modules: sdhci
>
>
> 06:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter
> (rev 08)
> Subsystem: Samsung Electronics Co Ltd Device b035
>
> Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
>
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin C routed to IRQ 255
> Region 0: Memory at c8001c00 (32-bit, non-prefetchable) [size=256]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>
> 06:09.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 03)
> Subsystem: Samsung Electronics Co Ltd Device b035
> Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin C routed to IRQ 255
> Region 0: Memory at c8002000 (32-bit, non-prefetchable) [size=256]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>
> [7.6.] SCSI information (from /proc/scsi/scsi)
>
> Attached devices:
> Host: scsi0 Channel: 00 Id: 00 Lun: 00
> Vendor: ATA Model: SAMSUNG HM120JC Rev: YL10
> Type: Direct-Access ANSI SCSI revision: 05
> Host: scsi0 Channel: 00 Id: 01 Lun: 00
> Vendor: TEAC Model: DV-W28EA Rev: S.0A
> Type: CD-ROM ANSI SCSI revision: 05
> Host: scsi2 Channel: 00 Id: 00 Lun: 00
> Vendor: WDC WD25 Model: 00BB-00GUC0 Rev: 0811
> Type: Direct-Access ANSI SCSI revision: 00
> Host: scsi3 Channel: 00 Id: 00 Lun: 00
> Vendor: HDT72252 Model: 5DLAT80 Rev: V44O
> Type: Direct-Access ANSI SCSI revision: 00
>
> [7.7.] Other information that might be relevant to the problem
> (please look in /proc and include all information that you
> think to be relevant):
>
> I hope this helps you fix my problem. :)
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: PROBLEM: Kernel 2.6.26 oops if I unplug my Logitech USB 1.1 headset
2008-09-05 0:28 ` Andrew Morton
@ 2008-09-05 7:09 ` Takashi Iwai
2008-09-05 7:58 ` Vegard Nossum
2008-09-10 7:43 ` Edgar Kalkowski
0 siblings, 2 replies; 8+ messages in thread
From: Takashi Iwai @ 2008-09-05 7:09 UTC (permalink / raw)
To: Andrew Morton; +Cc: Edgar Kalkowski, linux-kernel, linux-usb
At Thu, 4 Sep 2008 17:28:22 -0700,
Andrew Morton wrote:
>
> On Fri, 05 Sep 2008 01:05:21 +0200
> Edgar Kalkowski <eMail@edgar-kalkowski.de> wrote:
>
> > Dear kernel hackers. ;)
> >
> > [1.] One line summary of the problem: If I unplug my USB-Headset the kernel oopses.
>
> cc's added.
>
> Might be USB, might be ALSA.
Hm, it's hard to guess...
Edgar, could you check whether it happens with 2.6.25?
thanks,
Takashi
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: PROBLEM: Kernel 2.6.26 oops if I unplug my Logitech USB 1.1 headset
2008-09-05 7:09 ` Takashi Iwai
@ 2008-09-05 7:58 ` Vegard Nossum
2008-09-05 8:01 ` Vegard Nossum
2008-09-10 7:43 ` Edgar Kalkowski
1 sibling, 1 reply; 8+ messages in thread
From: Vegard Nossum @ 2008-09-05 7:58 UTC (permalink / raw)
To: Takashi Iwai; +Cc: Andrew Morton, Edgar Kalkowski, linux-kernel, linux-usb
On Fri, Sep 5, 2008 at 9:09 AM, Takashi Iwai <tiwai@suse.de> wrote:
> At Thu, 4 Sep 2008 17:28:22 -0700,
> Andrew Morton wrote:
>>
>> On Fri, 05 Sep 2008 01:05:21 +0200
>> Edgar Kalkowski <eMail@edgar-kalkowski.de> wrote:
>>
>> > Dear kernel hackers. ;)
>> >
>> > [1.] One line summary of the problem: If I unplug my USB-Headset the kernel oopses.
>>
>> cc's added.
>>
>> Might be USB, might be ALSA.
>
> Hm, it's hard to guess...
> Edgar, could you check whether it happens with 2.6.25?
Hi,
I recognize this address:
>>> BUG: unable to handle kernel paging request at 00100100
Is this a magic value? I also got it, see for example:
http://lkml.org/lkml/2008/8/21/426
Google will also recognize it:
http://www.google.com/search?hl=en&q="unable+to+handle+kernel+paging+request"+00100100
Where does it come from?
Vegard
--
"The animistic metaphor of the bug that maliciously sneaked in while
the programmer was not looking is intellectually dishonest as it
disguises that the error is the programmer's own creation."
-- E. W. Dijkstra, EWD1036
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: PROBLEM: Kernel 2.6.26 oops if I unplug my Logitech USB 1.1 headset
2008-09-05 7:58 ` Vegard Nossum
@ 2008-09-05 8:01 ` Vegard Nossum
2008-09-05 8:18 ` Vegard Nossum
0 siblings, 1 reply; 8+ messages in thread
From: Vegard Nossum @ 2008-09-05 8:01 UTC (permalink / raw)
To: Takashi Iwai; +Cc: Andrew Morton, Edgar Kalkowski, linux-kernel, linux-usb
On Fri, Sep 5, 2008 at 9:58 AM, Vegard Nossum <vegard.nossum@gmail.com> wrote:
> On Fri, Sep 5, 2008 at 9:09 AM, Takashi Iwai <tiwai@suse.de> wrote:
>> At Thu, 4 Sep 2008 17:28:22 -0700,
>> Andrew Morton wrote:
>>>
>>> On Fri, 05 Sep 2008 01:05:21 +0200
>>> Edgar Kalkowski <eMail@edgar-kalkowski.de> wrote:
>>>
>>> > Dear kernel hackers. ;)
>>> >
>>> > [1.] One line summary of the problem: If I unplug my USB-Headset the kernel oopses.
>>>
>>> cc's added.
>>>
>>> Might be USB, might be ALSA.
>>
>> Hm, it's hard to guess...
>> Edgar, could you check whether it happens with 2.6.25?
>
> Hi,
>
> I recognize this address:
>
>>>> BUG: unable to handle kernel paging request at 00100100
>
> Is this a magic value? I also got it, see for example:
> http://lkml.org/lkml/2008/8/21/426
>
> Google will also recognize it:
> http://www.google.com/search?hl=en&q="unable+to+handle+kernel+paging+request"+00100100
>
> Where does it come from?
Oh. It _is_ LIST_POISON1. Sorry for the bit of noise.
Vegard
--
"The animistic metaphor of the bug that maliciously sneaked in while
the programmer was not looking is intellectually dishonest as it
disguises that the error is the programmer's own creation."
-- E. W. Dijkstra, EWD1036
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: PROBLEM: Kernel 2.6.26 oops if I unplug my Logitech USB 1.1 headset
2008-09-05 8:01 ` Vegard Nossum
@ 2008-09-05 8:18 ` Vegard Nossum
2008-09-07 9:56 ` Takashi Iwai
0 siblings, 1 reply; 8+ messages in thread
From: Vegard Nossum @ 2008-09-05 8:18 UTC (permalink / raw)
To: Takashi Iwai; +Cc: Andrew Morton, Edgar Kalkowski, linux-kernel, linux-usb
On Fri, Sep 5, 2008 at 10:01 AM, Vegard Nossum <vegard.nossum@gmail.com> wrote:
> On Fri, Sep 5, 2008 at 9:58 AM, Vegard Nossum <vegard.nossum@gmail.com> wrote:
>> On Fri, Sep 5, 2008 at 9:09 AM, Takashi Iwai <tiwai@suse.de> wrote:
>>> At Thu, 4 Sep 2008 17:28:22 -0700,
>>> Andrew Morton wrote:
>>>>
>>>> On Fri, 05 Sep 2008 01:05:21 +0200
>>>> Edgar Kalkowski <eMail@edgar-kalkowski.de> wrote:
>>>>
>>>> > Dear kernel hackers. ;)
>>>> >
>>>> > [1.] One line summary of the problem: If I unplug my USB-Headset the kernel oopses.
>>>>
>>>> cc's added.
>>>>
>>>> Might be USB, might be ALSA.
>>>
>>> Hm, it's hard to guess...
>>> Edgar, could you check whether it happens with 2.6.25?
>>
>> Hi,
>>
>> I recognize this address:
>>
>>>>> BUG: unable to handle kernel paging request at 00100100
>>
>> Is this a magic value? I also got it, see for example:
>> http://lkml.org/lkml/2008/8/21/426
>>
>> Google will also recognize it:
>> http://www.google.com/search?hl=en&q="unable+to+handle+kernel+paging+request"+00100100
>>
>> Where does it come from?
>
> Oh. It _is_ LIST_POISON1. Sorry for the bit of noise.
Probably totally unrelated, but I couldn't help to find this bit of
code somewhat odd. In snd_ctl_dev_disconnect():
down_read(&card->controls_rwsem);
list_for_each_entry(ctl, &card->ctl_files, list) {
wake_up(&ctl->change_sleep);
kill_fasync(&ctl->fasync, SIGIO, POLL_ERR);
}
up_read(&card->controls_rwsem);
...shouldn't that be using &card->ctl_files_rwlock instead of
&card->controls_rwsem? That one is always used to protect the list ops
on &card->ctl_files in all the other places. Or maybe it is already
locked from higher ups?
Vegard
--
"The animistic metaphor of the bug that maliciously sneaked in while
the programmer was not looking is intellectually dishonest as it
disguises that the error is the programmer's own creation."
-- E. W. Dijkstra, EWD1036
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: PROBLEM: Kernel 2.6.26 oops if I unplug my Logitech USB 1.1 headset
2008-09-05 8:18 ` Vegard Nossum
@ 2008-09-07 9:56 ` Takashi Iwai
0 siblings, 0 replies; 8+ messages in thread
From: Takashi Iwai @ 2008-09-07 9:56 UTC (permalink / raw)
To: Vegard Nossum; +Cc: Andrew Morton, Edgar Kalkowski, linux-kernel, linux-usb
At Fri, 5 Sep 2008 10:18:06 +0200,
Vegard Nossum wrote:
>
> On Fri, Sep 5, 2008 at 10:01 AM, Vegard Nossum <vegard.nossum@gmail.com> wrote:
> > On Fri, Sep 5, 2008 at 9:58 AM, Vegard Nossum <vegard.nossum@gmail.com> wrote:
> >> On Fri, Sep 5, 2008 at 9:09 AM, Takashi Iwai <tiwai@suse.de> wrote:
> >>> At Thu, 4 Sep 2008 17:28:22 -0700,
> >>> Andrew Morton wrote:
> >>>>
> >>>> On Fri, 05 Sep 2008 01:05:21 +0200
> >>>> Edgar Kalkowski <eMail@edgar-kalkowski.de> wrote:
> >>>>
> >>>> > Dear kernel hackers. ;)
> >>>> >
> >>>> > [1.] One line summary of the problem: If I unplug my USB-Headset the kernel oopses.
> >>>>
> >>>> cc's added.
> >>>>
> >>>> Might be USB, might be ALSA.
> >>>
> >>> Hm, it's hard to guess...
> >>> Edgar, could you check whether it happens with 2.6.25?
> >>
> >> Hi,
> >>
> >> I recognize this address:
> >>
> >>>>> BUG: unable to handle kernel paging request at 00100100
> >>
> >> Is this a magic value? I also got it, see for example:
> >> http://lkml.org/lkml/2008/8/21/426
> >>
> >> Google will also recognize it:
> >> http://www.google.com/search?hl=en&q="unable+to+handle+kernel+paging+request"+00100100
> >>
> >> Where does it come from?
> >
> > Oh. It _is_ LIST_POISON1. Sorry for the bit of noise.
>
> Probably totally unrelated, but I couldn't help to find this bit of
> code somewhat odd. In snd_ctl_dev_disconnect():
>
> down_read(&card->controls_rwsem);
> list_for_each_entry(ctl, &card->ctl_files, list) {
> wake_up(&ctl->change_sleep);
> kill_fasync(&ctl->fasync, SIGIO, POLL_ERR);
> }
> up_read(&card->controls_rwsem);
>
> ...shouldn't that be using &card->ctl_files_rwlock instead of
> &card->controls_rwsem? That one is always used to protect the list ops
> on &card->ctl_files in all the other places. Or maybe it is already
> locked from higher ups?
I think you're right. This should be card->ctl_files_rwlock.
Will fix up the code later.
thanks,
Takashi
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: PROBLEM: Kernel 2.6.26 oops if I unplug my Logitech USB 1.1 headset
2008-09-05 7:09 ` Takashi Iwai
2008-09-05 7:58 ` Vegard Nossum
@ 2008-09-10 7:43 ` Edgar Kalkowski
1 sibling, 0 replies; 8+ messages in thread
From: Edgar Kalkowski @ 2008-09-10 7:43 UTC (permalink / raw)
To: Takashi Iwai; +Cc: Andrew Morton, linux-kernel, linux-usb
Sorry that it lasted a while, I had to compile a 2.6.25 kernel. But the error is
just the same with it. The funny thing is that it does not happen always but
only sometimes (I have to unplug and replug about 5 times until the error
occurrs). Looks to me like a threading issue if I may dare to guess. ;)
Regards!
Edgar
Takashi Iwai wrote:
> At Thu, 4 Sep 2008 17:28:22 -0700,
> Andrew Morton wrote:
>> On Fri, 05 Sep 2008 01:05:21 +0200
>> Edgar Kalkowski <eMail@edgar-kalkowski.de> wrote:
>>
>>> Dear kernel hackers. ;)
>>>
>>> [1.] One line summary of the problem: If I unplug my USB-Headset the kernel oopses.
>> cc's added.
>>
>> Might be USB, might be ALSA.
>
> Hm, it's hard to guess...
> Edgar, could you check whether it happens with 2.6.25?
>
>
> thanks,
>
> Takashi
>
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2008-09-10 7:45 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-09-04 23:05 PROBLEM: Kernel 2.6.26 oops if I unplug my Logitech USB 1.1 headset Edgar Kalkowski
2008-09-05 0:28 ` Andrew Morton
2008-09-05 7:09 ` Takashi Iwai
2008-09-05 7:58 ` Vegard Nossum
2008-09-05 8:01 ` Vegard Nossum
2008-09-05 8:18 ` Vegard Nossum
2008-09-07 9:56 ` Takashi Iwai
2008-09-10 7:43 ` Edgar Kalkowski
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.