From: Matthew Ranostay <mranostay@embeddedalley.com>
To: Jiri Slaby <jirislaby@gmail.com>
Cc: Takashi Iwai <tiwai@suse.de>,
Andrew Morton <akpm@linux-foundation.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
alsa-devel@alsa-project.org
Subject: Re: hda_intel (sigmatel) defunct in mmotm 2008-09-13-03-09
Date: Mon, 15 Sep 2008 10:16:15 -0400 [thread overview]
Message-ID: <48CE6E2F.1070902@embeddedalley.com> (raw)
In-Reply-To: <48CE6A90.1070309@gmail.com>
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hello Jiri,
Yeah the problem is my bounds checking isn't correct, submitting a patch upstream shortly.
Thanks,
Matt Ranostay
Jiri Slaby wrote:
> Hi,
>
> I've found my sound defunct in mmotm 2008-09-13-03-09 (opposing to
> 2008-09-10-19-39).
>
> My debug shows:
> HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
> HDA Intel 0000:00:1b.0: setting latency timer to 64
> azx_codec_create (1232): t=0, max=4, def=3, mask=4, probe_mask=ffffffff
> snd_hda_codec_new A: ffff88007b6988f8
> patch_stac927x A: 0
> stac92xx_parse_auto_config A
> stac92xx_parse_auto_config B
> stac92xx_parse_auto_config E
> stac92xx_parse_auto_config F
> stac92xx_parse_auto_config G
> stac92xx_parse_auto_config H
> stac92xx_parse_auto_config L: 0
> stac92xx_parse_auto_config M: 0
> stac92xx_parse_auto_config O
> stac92xx_parse_auto_config P
> stac92xx_parse_auto_config Q
> stac92xx_auto_create_spdif_mux_ctls: num_cons=5
> patch_stac927x B: -22
> snd_hda_codec_new E: -22
> azx_codec_create (1239): c=2, err=-22
> azx_codec_create (1251): cod=0, acod=0
> hda-intel: no codecs initialized
> HDA Intel 0000:00:1b.0: PCI INT A disabled
>
>
> The problem lays in the newly added function:
> stac92xx_auto_create_spdif_mux_ctls
> The count (=5) is out of bounds.
>
>
>
>
> The device is:
> 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller
> (rev 02)
> Subsystem: Intel Corporation Optiplex 755
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 22
> Region 0: Memory at ffa70000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Count=1/1
> Enable-
> Address: 0000000000000000 Data: 0000
> Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1
> <1us
> ExtTag- RBE- FLReset+
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
> LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency
> L0 <64ns, L1 <1us
> ClockPM- Suprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk-
> DLActive- BWMgmt- ABWMgmt-
> Capabilities: [100] Virtual Channel <?>
> Capabilities: [130] Root Complex Link <?>
> Kernel driver in use: HDA Intel
> 00: 86 80 3e 29 06 00 10 00 02 00 03 04 08 00 00 00
> 10: 04 00 a7 ff 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 3e 29
> 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00
>
>
>
>
> codec output from OK kernel:
> Codec: SigmaTel STAC9274D
> Address: 2
> Vendor Id: 0x83847621
> Subsystem Id: 0x100
> Revision Id: 0x100201
> No Modem Function Group found
> Default PCM:
> rates [0x7e0]: 44100 48000 88200 96000 176400 192000
> bits [0xe]: 16 20 24
> formats [0x1]: PCM
> Default Amp-In caps: ofs=0x00, nsteps=0x0e, stepsize=0x05, mute=0
> Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1
> GPIO: io=3, o=0, i=0, unsolicited=1, wake=1
> IO[0]: enable=1, dir=1, wake=0, sticky=0, data=1
> IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0
> IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0
> Node 0x02 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
> Amp-Out caps: N/A
> Amp-Out vals: [0x49 0x49]
> Converter: stream=5, channel=0
> Power: setting=D0, actual=D0
> Delay: 13 samples
> Node 0x03 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
> Amp-Out caps: N/A
> Amp-Out vals: [0x49 0x49]
> Converter: stream=5, channel=0
> Power: setting=D0, actual=D0
> Delay: 13 samples
> Node 0x04 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
> Amp-Out caps: N/A
> Amp-Out vals: [0x49 0x46]
> Converter: stream=5, channel=0
> Power: setting=D0, actual=D0
> Delay: 13 samples
> Node 0x05 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
> Amp-Out caps: N/A
> Amp-Out vals: [0x49 0x49]
> Converter: stream=5, channel=0
> Power: setting=D0, actual=D0
> Delay: 13 samples
> Node 0x06 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
> Amp-Out caps: N/A
> Amp-Out vals: [0xff 0xff]
> Converter: stream=0, channel=0
> Power: setting=D3, actual=D3
> Delay: 13 samples
> Node 0x07 [Audio Input] wcaps 0x1d0541: Stereo
> Converter: stream=0, channel=0
> SDI-Select: 0
> Power: setting=D0, actual=D0
> Delay: 13 samples
> Connection: 1
> 0x1b
> Processing caps: benign=0, ncoeff=0
> Node 0x08 [Audio Input] wcaps 0x1d0541: Stereo
> Converter: stream=0, channel=0
> SDI-Select: 0
> Power: setting=D0, actual=D0
> Delay: 13 samples
> Connection: 1
> 0x1c
> Processing caps: benign=0, ncoeff=0
> Node 0x09 [Audio Input] wcaps 0x1d0541: Stereo
> Converter: stream=0, channel=0
> SDI-Select: 0
> Power: setting=D0, actual=D0
> Delay: 13 samples
> Connection: 1
> 0x1d
> Processing caps: benign=0, ncoeff=0
> Node 0x0a [Pin Complex] wcaps 0x400181: Stereo
> Pincap 0x08173f: IN OUT HP Detect Trigger ImpSense
> Vref caps: HIZ 50 GRD 80
> Pin Default 0x02214020: [Jack] HP Out at Ext Front
> Conn = 1/8, Color = Green
> DefAssociation = 0x2, Sequence = 0x0
> Pin-ctls: 0xc0: OUT HP VREF_HIZ
> Unsolicited: tag=30, enabled=1
> Connection: 3
> 0x02* 0x03 0x06
> Node 0x0b [Pin Complex] wcaps 0x400181: Stereo
> Pincap 0x08173f: IN OUT HP Detect Trigger ImpSense
> Vref caps: HIZ 50 GRD 80
> Pin Default 0x02a19080: [Jack] Mic at Ext Front
> Conn = 1/8, Color = Pink
> DefAssociation = 0x8, Sequence = 0x0
> Pin-ctls: 0x24: IN VREF_80
> Unsolicited: tag=00, enabled=0
> Connection: 3
> 0x02* 0x03 0x06
> Node 0x0c [Pin Complex] wcaps 0x400181: Stereo
> Pincap 0x081737: IN OUT Detect Trigger ImpSense
> Vref caps: HIZ 50 GRD 80
> Pin Default 0x0181304e: [Jack] Line In at Ext Rear
> Conn = 1/8, Color = Blue
> DefAssociation = 0x4, Sequence = 0xe
> Pin-ctls: 0x20: IN VREF_HIZ
> Unsolicited: tag=00, enabled=0
> Connection: 1
> 0x03
> Node 0x0d [Pin Complex] wcaps 0x400181: Stereo
> Pincap 0x08173f: IN OUT HP Detect Trigger ImpSense
> Vref caps: HIZ 50 GRD 80
> Pin Default 0x01014010: [Jack] Line Out at Ext Rear
> Conn = 1/8, Color = Green
> DefAssociation = 0x1, Sequence = 0x0
> Pin-ctls: 0x40: OUT VREF_HIZ
> Unsolicited: tag=00, enabled=0
> Connection: 1
> 0x02
> Node 0x0e [Pin Complex] wcaps 0x400181: Stereo
> Pincap 0x081737: IN OUT Detect Trigger ImpSense
> Vref caps: HIZ 50 GRD 80
> Pin Default 0x01a19040: [Jack] Mic at Ext Rear
> Conn = 1/8, Color = Pink
> DefAssociation = 0x4, Sequence = 0x0
> Pin-ctls: 0x24: IN VREF_80
> Unsolicited: tag=00, enabled=0
> Connection: 1
> 0x04
> Node 0x0f [Pin Complex] wcaps 0x400181: Stereo
> Pincap 0x081737: IN OUT Detect Trigger ImpSense
> Vref caps: HIZ 50 GRD 80
> Pin Default 0x01011012: [Jack] Line Out at Ext Rear
> Conn = 1/8, Color = Black
> DefAssociation = 0x1, Sequence = 0x2
> Pin-ctls: 0x40: OUT VREF_HIZ
> Unsolicited: tag=00, enabled=0
> Connection: 1
> 0x05
> Node 0x10 [Pin Complex] wcaps 0x400181: Stereo
> Pincap 0x0837: IN OUT Detect Trigger ImpSense
> Pin Default 0x01016011: [Jack] Line Out at Ext Rear
> Conn = 1/8, Color = Orange
> DefAssociation = 0x1, Sequence = 0x1
> Pin-ctls: 0x40: OUT
> Unsolicited: tag=00, enabled=0
> Connection: 1
> 0x04
> Node 0x11 [Pin Complex] wcaps 0x400181: Stereo
> Pincap 0x0837: IN OUT Detect Trigger ImpSense
> Pin Default 0x01012014: [Jack] Line Out at Ext Rear
> Conn = 1/8, Color = Grey
> DefAssociation = 0x1, Sequence = 0x4
> Pin-ctls: 0x40: OUT
> Unsolicited: tag=00, enabled=0
> Connection: 1
> 0x03
> Node 0x12 [Pin Complex] wcaps 0x400001: Stereo
> Pincap 0x0820: IN
> Pin Default 0x503301f0: [N/A] CD at Int N/A
> Conn = ATAPI, Color = Unknown
> DefAssociation = 0xf, Sequence = 0x0
> Misc = NO_PRESENCE
> Pin-ctls: 0x00:
> Node 0x13 [Pin Complex] wcaps 0x400001: Stereo
> Pincap 0x0820: IN
> Pin Default 0x50a001f0: [N/A] Mic at Int N/A
> Conn = Unknown, Color = Unknown
> DefAssociation = 0xf, Sequence = 0x0
> Misc = NO_PRESENCE
> Pin-ctls: 0x00:
> Node 0x14 [Pin Complex] wcaps 0x400001: Stereo
> Pincap 0x0820: IN
> Pin Default 0x50a001f0: [N/A] Mic at Int N/A
> Conn = Unknown, Color = Unknown
> DefAssociation = 0xf, Sequence = 0x0
> Misc = NO_PRESENCE
> Pin-ctls: 0x00:
> Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
> Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
> Amp-Out vals: [0x00 0x00]
> Connection: 9
> 0x0e* 0x12 0x0f 0x0b 0x0c 0x0d 0x0a 0x10 0x11
> Node 0x16 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
> Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
> Amp-Out vals: [0x00 0x00]
> Connection: 9
> 0x0e* 0x12 0x0f 0x0b 0x0c 0x0d 0x0a 0x10 0x11
> Node 0x17 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
> Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
> Amp-Out vals: [0x00 0x00]
> Connection: 9
> 0x0e* 0x12 0x0f 0x0b 0x0c 0x0d 0x0a 0x10 0x11
> Node 0x18 [Audio Selector] wcaps 0x300103: Stereo Amp-In
> Amp-In caps: N/A
> Amp-In vals: [0x00 0x00]
> Connection: 1
> 0x15
> Node 0x19 [Audio Selector] wcaps 0x300103: Stereo Amp-In
> Amp-In caps: N/A
> Amp-In vals: [0x00 0x00]
> Connection: 1
> 0x16
> Node 0x1a [Audio Selector] wcaps 0x300103: Stereo Amp-In
> Amp-In caps: N/A
> Amp-In vals: [0x00 0x00]
> Connection: 1
> 0x17
> Node 0x1b [Audio Selector] wcaps 0x30090d: Stereo Amp-Out R/L
> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-Out vals: [0x00 0x00]
> Connection: 3
> 0x18* 0x13 0x14
> Node 0x1c [Audio Selector] wcaps 0x30090d: Stereo Amp-Out R/L
> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-Out vals: [0x80 0x80]
> Connection: 3
> 0x19* 0x13 0x14
> Node 0x1d [Audio Selector] wcaps 0x30090d: Stereo Amp-Out R/L
> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-Out vals: [0x80 0x80]
> Connection: 3
> 0x1a* 0x13 0x14
> Node 0x1e [Audio Output] wcaps 0x40211: Stereo Digital
> Converter: stream=0, channel=0
> Digital:
> Digital category: 0x0
> PCM:
> rates [0x7e0]: 44100 48000 88200 96000 176400 192000
> bits [0xe]: 16 20 24
> formats [0x5]: PCM AC3
> Delay: 4 samples
> Node 0x1f [Vendor Defined Widget] wcaps 0xf30201: Stereo Digital
> Delay: 3 samples
> Node 0x20 [Audio Input] wcaps 0x140311: Stereo Digital
> Converter: stream=0, channel=0
> SDI-Select: 0
> Digital:
> Digital category: 0x0
> PCM:
> rates [0x160]: 44100 48000 96000
> bits [0xe]: 16 20 24
> formats [0x5]: PCM AC3
> Delay: 4 samples
> Connection: 1
> 0x22
> Node 0x21 [Pin Complex] wcaps 0x400301: Stereo Digital
> Pincap 0x0810: OUT
> Pin Default 0x01442170: [Jack] SPDIF Out at Ext Rear
> Conn = RCA, Color = Grey
> DefAssociation = 0x7, Sequence = 0x0
> Misc = NO_PRESENCE
> Pin-ctls: 0x40: OUT
> Connection: 5
> 0x1e* 0x1f 0x1b 0x1c 0x1d
> Node 0x22 [Pin Complex] wcaps 0x430681: Stereo Digital
> Pincap 0x0810024: IN EAPD Detect
> EAPD 0x0:
> Pin Default 0x81c42090: [Fixed] SPDIF In at Ext Rear
> Conn = RCA, Color = Grey
> DefAssociation = 0x9, Sequence = 0x0
> Pin-ctls: 0x20: IN
> Unsolicited: tag=00, enabled=0
> Power: setting=D0, actual=D0
> Delay: 3 samples
> Node 0x23 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
> Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=0
> Amp-Out vals: [0x00]
> Node 0x24 [Volume Knob Widget] wcaps 0x600000: Mono
> Volume-Knob: delta=1, steps=127, direct=1, val=127
> Connection: 5
> 0x02* 0x03 0x04 0x05 0x06
>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (Darwin)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iEYEARECAAYFAkjObi8ACgkQ7s2wy7nhBHW4FgCdEHD/SGJYCArw8pIdsdFiXruT
piIAn13101Q+dkQnP6bcrLzSqRUUsNw4
=61nc
-----END PGP SIGNATURE-----
WARNING: multiple messages have this Message-ID (diff)
From: Matthew Ranostay <mranostay@embeddedalley.com>
To: Jiri Slaby <jirislaby@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Takashi Iwai <tiwai@suse.de>,
alsa-devel@alsa-project.org
Subject: Re: hda_intel (sigmatel) defunct in mmotm 2008-09-13-03-09
Date: Mon, 15 Sep 2008 10:16:15 -0400 [thread overview]
Message-ID: <48CE6E2F.1070902@embeddedalley.com> (raw)
In-Reply-To: <48CE6A90.1070309@gmail.com>
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hello Jiri,
Yeah the problem is my bounds checking isn't correct, submitting a patch upstream shortly.
Thanks,
Matt Ranostay
Jiri Slaby wrote:
> Hi,
>
> I've found my sound defunct in mmotm 2008-09-13-03-09 (opposing to
> 2008-09-10-19-39).
>
> My debug shows:
> HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
> HDA Intel 0000:00:1b.0: setting latency timer to 64
> azx_codec_create (1232): t=0, max=4, def=3, mask=4, probe_mask=ffffffff
> snd_hda_codec_new A: ffff88007b6988f8
> patch_stac927x A: 0
> stac92xx_parse_auto_config A
> stac92xx_parse_auto_config B
> stac92xx_parse_auto_config E
> stac92xx_parse_auto_config F
> stac92xx_parse_auto_config G
> stac92xx_parse_auto_config H
> stac92xx_parse_auto_config L: 0
> stac92xx_parse_auto_config M: 0
> stac92xx_parse_auto_config O
> stac92xx_parse_auto_config P
> stac92xx_parse_auto_config Q
> stac92xx_auto_create_spdif_mux_ctls: num_cons=5
> patch_stac927x B: -22
> snd_hda_codec_new E: -22
> azx_codec_create (1239): c=2, err=-22
> azx_codec_create (1251): cod=0, acod=0
> hda-intel: no codecs initialized
> HDA Intel 0000:00:1b.0: PCI INT A disabled
>
>
> The problem lays in the newly added function:
> stac92xx_auto_create_spdif_mux_ctls
> The count (=5) is out of bounds.
>
>
>
>
> The device is:
> 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller
> (rev 02)
> Subsystem: Intel Corporation Optiplex 755
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 22
> Region 0: Memory at ffa70000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Count=1/1
> Enable-
> Address: 0000000000000000 Data: 0000
> Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1
> <1us
> ExtTag- RBE- FLReset+
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
> LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency
> L0 <64ns, L1 <1us
> ClockPM- Suprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk-
> DLActive- BWMgmt- ABWMgmt-
> Capabilities: [100] Virtual Channel <?>
> Capabilities: [130] Root Complex Link <?>
> Kernel driver in use: HDA Intel
> 00: 86 80 3e 29 06 00 10 00 02 00 03 04 08 00 00 00
> 10: 04 00 a7 ff 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 3e 29
> 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00
>
>
>
>
> codec output from OK kernel:
> Codec: SigmaTel STAC9274D
> Address: 2
> Vendor Id: 0x83847621
> Subsystem Id: 0x100
> Revision Id: 0x100201
> No Modem Function Group found
> Default PCM:
> rates [0x7e0]: 44100 48000 88200 96000 176400 192000
> bits [0xe]: 16 20 24
> formats [0x1]: PCM
> Default Amp-In caps: ofs=0x00, nsteps=0x0e, stepsize=0x05, mute=0
> Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1
> GPIO: io=3, o=0, i=0, unsolicited=1, wake=1
> IO[0]: enable=1, dir=1, wake=0, sticky=0, data=1
> IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0
> IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0
> Node 0x02 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
> Amp-Out caps: N/A
> Amp-Out vals: [0x49 0x49]
> Converter: stream=5, channel=0
> Power: setting=D0, actual=D0
> Delay: 13 samples
> Node 0x03 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
> Amp-Out caps: N/A
> Amp-Out vals: [0x49 0x49]
> Converter: stream=5, channel=0
> Power: setting=D0, actual=D0
> Delay: 13 samples
> Node 0x04 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
> Amp-Out caps: N/A
> Amp-Out vals: [0x49 0x46]
> Converter: stream=5, channel=0
> Power: setting=D0, actual=D0
> Delay: 13 samples
> Node 0x05 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
> Amp-Out caps: N/A
> Amp-Out vals: [0x49 0x49]
> Converter: stream=5, channel=0
> Power: setting=D0, actual=D0
> Delay: 13 samples
> Node 0x06 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
> Amp-Out caps: N/A
> Amp-Out vals: [0xff 0xff]
> Converter: stream=0, channel=0
> Power: setting=D3, actual=D3
> Delay: 13 samples
> Node 0x07 [Audio Input] wcaps 0x1d0541: Stereo
> Converter: stream=0, channel=0
> SDI-Select: 0
> Power: setting=D0, actual=D0
> Delay: 13 samples
> Connection: 1
> 0x1b
> Processing caps: benign=0, ncoeff=0
> Node 0x08 [Audio Input] wcaps 0x1d0541: Stereo
> Converter: stream=0, channel=0
> SDI-Select: 0
> Power: setting=D0, actual=D0
> Delay: 13 samples
> Connection: 1
> 0x1c
> Processing caps: benign=0, ncoeff=0
> Node 0x09 [Audio Input] wcaps 0x1d0541: Stereo
> Converter: stream=0, channel=0
> SDI-Select: 0
> Power: setting=D0, actual=D0
> Delay: 13 samples
> Connection: 1
> 0x1d
> Processing caps: benign=0, ncoeff=0
> Node 0x0a [Pin Complex] wcaps 0x400181: Stereo
> Pincap 0x08173f: IN OUT HP Detect Trigger ImpSense
> Vref caps: HIZ 50 GRD 80
> Pin Default 0x02214020: [Jack] HP Out at Ext Front
> Conn = 1/8, Color = Green
> DefAssociation = 0x2, Sequence = 0x0
> Pin-ctls: 0xc0: OUT HP VREF_HIZ
> Unsolicited: tag=30, enabled=1
> Connection: 3
> 0x02* 0x03 0x06
> Node 0x0b [Pin Complex] wcaps 0x400181: Stereo
> Pincap 0x08173f: IN OUT HP Detect Trigger ImpSense
> Vref caps: HIZ 50 GRD 80
> Pin Default 0x02a19080: [Jack] Mic at Ext Front
> Conn = 1/8, Color = Pink
> DefAssociation = 0x8, Sequence = 0x0
> Pin-ctls: 0x24: IN VREF_80
> Unsolicited: tag=00, enabled=0
> Connection: 3
> 0x02* 0x03 0x06
> Node 0x0c [Pin Complex] wcaps 0x400181: Stereo
> Pincap 0x081737: IN OUT Detect Trigger ImpSense
> Vref caps: HIZ 50 GRD 80
> Pin Default 0x0181304e: [Jack] Line In at Ext Rear
> Conn = 1/8, Color = Blue
> DefAssociation = 0x4, Sequence = 0xe
> Pin-ctls: 0x20: IN VREF_HIZ
> Unsolicited: tag=00, enabled=0
> Connection: 1
> 0x03
> Node 0x0d [Pin Complex] wcaps 0x400181: Stereo
> Pincap 0x08173f: IN OUT HP Detect Trigger ImpSense
> Vref caps: HIZ 50 GRD 80
> Pin Default 0x01014010: [Jack] Line Out at Ext Rear
> Conn = 1/8, Color = Green
> DefAssociation = 0x1, Sequence = 0x0
> Pin-ctls: 0x40: OUT VREF_HIZ
> Unsolicited: tag=00, enabled=0
> Connection: 1
> 0x02
> Node 0x0e [Pin Complex] wcaps 0x400181: Stereo
> Pincap 0x081737: IN OUT Detect Trigger ImpSense
> Vref caps: HIZ 50 GRD 80
> Pin Default 0x01a19040: [Jack] Mic at Ext Rear
> Conn = 1/8, Color = Pink
> DefAssociation = 0x4, Sequence = 0x0
> Pin-ctls: 0x24: IN VREF_80
> Unsolicited: tag=00, enabled=0
> Connection: 1
> 0x04
> Node 0x0f [Pin Complex] wcaps 0x400181: Stereo
> Pincap 0x081737: IN OUT Detect Trigger ImpSense
> Vref caps: HIZ 50 GRD 80
> Pin Default 0x01011012: [Jack] Line Out at Ext Rear
> Conn = 1/8, Color = Black
> DefAssociation = 0x1, Sequence = 0x2
> Pin-ctls: 0x40: OUT VREF_HIZ
> Unsolicited: tag=00, enabled=0
> Connection: 1
> 0x05
> Node 0x10 [Pin Complex] wcaps 0x400181: Stereo
> Pincap 0x0837: IN OUT Detect Trigger ImpSense
> Pin Default 0x01016011: [Jack] Line Out at Ext Rear
> Conn = 1/8, Color = Orange
> DefAssociation = 0x1, Sequence = 0x1
> Pin-ctls: 0x40: OUT
> Unsolicited: tag=00, enabled=0
> Connection: 1
> 0x04
> Node 0x11 [Pin Complex] wcaps 0x400181: Stereo
> Pincap 0x0837: IN OUT Detect Trigger ImpSense
> Pin Default 0x01012014: [Jack] Line Out at Ext Rear
> Conn = 1/8, Color = Grey
> DefAssociation = 0x1, Sequence = 0x4
> Pin-ctls: 0x40: OUT
> Unsolicited: tag=00, enabled=0
> Connection: 1
> 0x03
> Node 0x12 [Pin Complex] wcaps 0x400001: Stereo
> Pincap 0x0820: IN
> Pin Default 0x503301f0: [N/A] CD at Int N/A
> Conn = ATAPI, Color = Unknown
> DefAssociation = 0xf, Sequence = 0x0
> Misc = NO_PRESENCE
> Pin-ctls: 0x00:
> Node 0x13 [Pin Complex] wcaps 0x400001: Stereo
> Pincap 0x0820: IN
> Pin Default 0x50a001f0: [N/A] Mic at Int N/A
> Conn = Unknown, Color = Unknown
> DefAssociation = 0xf, Sequence = 0x0
> Misc = NO_PRESENCE
> Pin-ctls: 0x00:
> Node 0x14 [Pin Complex] wcaps 0x400001: Stereo
> Pincap 0x0820: IN
> Pin Default 0x50a001f0: [N/A] Mic at Int N/A
> Conn = Unknown, Color = Unknown
> DefAssociation = 0xf, Sequence = 0x0
> Misc = NO_PRESENCE
> Pin-ctls: 0x00:
> Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
> Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
> Amp-Out vals: [0x00 0x00]
> Connection: 9
> 0x0e* 0x12 0x0f 0x0b 0x0c 0x0d 0x0a 0x10 0x11
> Node 0x16 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
> Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
> Amp-Out vals: [0x00 0x00]
> Connection: 9
> 0x0e* 0x12 0x0f 0x0b 0x0c 0x0d 0x0a 0x10 0x11
> Node 0x17 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
> Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
> Amp-Out vals: [0x00 0x00]
> Connection: 9
> 0x0e* 0x12 0x0f 0x0b 0x0c 0x0d 0x0a 0x10 0x11
> Node 0x18 [Audio Selector] wcaps 0x300103: Stereo Amp-In
> Amp-In caps: N/A
> Amp-In vals: [0x00 0x00]
> Connection: 1
> 0x15
> Node 0x19 [Audio Selector] wcaps 0x300103: Stereo Amp-In
> Amp-In caps: N/A
> Amp-In vals: [0x00 0x00]
> Connection: 1
> 0x16
> Node 0x1a [Audio Selector] wcaps 0x300103: Stereo Amp-In
> Amp-In caps: N/A
> Amp-In vals: [0x00 0x00]
> Connection: 1
> 0x17
> Node 0x1b [Audio Selector] wcaps 0x30090d: Stereo Amp-Out R/L
> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-Out vals: [0x00 0x00]
> Connection: 3
> 0x18* 0x13 0x14
> Node 0x1c [Audio Selector] wcaps 0x30090d: Stereo Amp-Out R/L
> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-Out vals: [0x80 0x80]
> Connection: 3
> 0x19* 0x13 0x14
> Node 0x1d [Audio Selector] wcaps 0x30090d: Stereo Amp-Out R/L
> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-Out vals: [0x80 0x80]
> Connection: 3
> 0x1a* 0x13 0x14
> Node 0x1e [Audio Output] wcaps 0x40211: Stereo Digital
> Converter: stream=0, channel=0
> Digital:
> Digital category: 0x0
> PCM:
> rates [0x7e0]: 44100 48000 88200 96000 176400 192000
> bits [0xe]: 16 20 24
> formats [0x5]: PCM AC3
> Delay: 4 samples
> Node 0x1f [Vendor Defined Widget] wcaps 0xf30201: Stereo Digital
> Delay: 3 samples
> Node 0x20 [Audio Input] wcaps 0x140311: Stereo Digital
> Converter: stream=0, channel=0
> SDI-Select: 0
> Digital:
> Digital category: 0x0
> PCM:
> rates [0x160]: 44100 48000 96000
> bits [0xe]: 16 20 24
> formats [0x5]: PCM AC3
> Delay: 4 samples
> Connection: 1
> 0x22
> Node 0x21 [Pin Complex] wcaps 0x400301: Stereo Digital
> Pincap 0x0810: OUT
> Pin Default 0x01442170: [Jack] SPDIF Out at Ext Rear
> Conn = RCA, Color = Grey
> DefAssociation = 0x7, Sequence = 0x0
> Misc = NO_PRESENCE
> Pin-ctls: 0x40: OUT
> Connection: 5
> 0x1e* 0x1f 0x1b 0x1c 0x1d
> Node 0x22 [Pin Complex] wcaps 0x430681: Stereo Digital
> Pincap 0x0810024: IN EAPD Detect
> EAPD 0x0:
> Pin Default 0x81c42090: [Fixed] SPDIF In at Ext Rear
> Conn = RCA, Color = Grey
> DefAssociation = 0x9, Sequence = 0x0
> Pin-ctls: 0x20: IN
> Unsolicited: tag=00, enabled=0
> Power: setting=D0, actual=D0
> Delay: 3 samples
> Node 0x23 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
> Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=0
> Amp-Out vals: [0x00]
> Node 0x24 [Volume Knob Widget] wcaps 0x600000: Mono
> Volume-Knob: delta=1, steps=127, direct=1, val=127
> Connection: 5
> 0x02* 0x03 0x04 0x05 0x06
>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (Darwin)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iEYEARECAAYFAkjObi8ACgkQ7s2wy7nhBHW4FgCdEHD/SGJYCArw8pIdsdFiXruT
piIAn13101Q+dkQnP6bcrLzSqRUUsNw4
=61nc
-----END PGP SIGNATURE-----
next prev parent reply other threads:[~2008-09-15 14:16 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-09-15 14:00 hda_intel (sigmatel) defunct in mmotm 2008-09-13-03-09 Jiri Slaby
2008-09-15 14:16 ` Matthew Ranostay [this message]
2008-09-15 14:16 ` Matthew Ranostay
2008-09-16 14:43 ` Matthew Ranostay
2008-09-17 8:58 ` Jiri Slaby
2008-09-17 14:09 ` Matthew Ranostay
2008-09-24 9:42 ` Jiri Slaby
2008-09-17 16:46 ` suspend (uhci_hcd) " Jiri Slaby
2008-09-18 21:14 ` Alan Stern
2008-09-18 21:14 ` Alan Stern
2008-09-24 10:55 ` Jiri Slaby
2008-09-24 10:55 ` Jiri Slaby
2008-09-24 14:49 ` Alan Stern
2008-09-24 14:49 ` Alan Stern
2008-09-24 16:04 ` Jiri Slaby
2008-09-24 16:38 ` Alan Stern
2008-09-24 18:14 ` Greg KH
2008-09-24 18:14 ` Greg KH
2008-09-24 18:19 ` Jiri Slaby
2008-09-24 18:54 ` Jiri Slaby
2008-09-24 21:29 ` Alan Stern
2008-09-24 21:29 ` Alan Stern
2008-09-25 20:51 ` Jiri Slaby
2008-09-25 21:07 ` [PATCH] PM: use pm_op methods for device types Alan Stern
2008-09-25 21:27 ` Rafael J. Wysocki
2008-09-25 21:27 ` Rafael J. Wysocki
2008-09-25 22:06 ` Greg KH
2008-09-26 13:56 ` Alan Stern
2008-09-26 13:56 ` Alan Stern
2008-09-26 17:59 ` Greg KH
2008-09-26 17:59 ` Greg KH
2008-10-06 15:11 ` Pavel Machek
2008-10-06 15:11 ` Pavel Machek
2008-09-25 22:06 ` Greg KH
2008-09-25 21:07 ` Alan Stern
2008-09-25 20:51 ` suspend (uhci_hcd) defunct in mmotm 2008-09-13-03-09 Jiri Slaby
2008-09-24 18:54 ` Jiri Slaby
2008-09-24 18:19 ` Jiri Slaby
2008-09-24 16:38 ` Alan Stern
2008-09-24 16:04 ` Jiri Slaby
2008-09-17 16:46 ` Jiri Slaby
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48CE6E2F.1070902@embeddedalley.com \
--to=mranostay@embeddedalley.com \
--cc=akpm@linux-foundation.org \
--cc=alsa-devel@alsa-project.org \
--cc=jirislaby@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.