* insmod problem
@ 2008-09-16 7:15 Bily
2008-09-17 8:19 ` mal reddy y
0 siblings, 1 reply; 11+ messages in thread
From: Bily @ 2008-09-16 7:15 UTC (permalink / raw)
To: linux-kernel
hi,all;
I want to insert an module:yaffs.ko into my kernel2.6.26,but i meet this question:
[\u@\h \W]$insmod yaffs.ko
yaffs: unknown relocation: 40
insmod: cannot insert 'yaffs.ko': invalid module format
and my busybox version is v1.11.1; may anyone tell me why ?thanks!
Bily
2008-09-13
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: insmod problem
2008-09-16 7:15 insmod problem Bily
@ 2008-09-17 8:19 ` mal reddy y
2008-09-17 8:27 ` Bily
0 siblings, 1 reply; 11+ messages in thread
From: mal reddy y @ 2008-09-17 8:19 UTC (permalink / raw)
To: Bily; +Cc: linux-kernel
give clear explanation how you have installed
regards,
YMR
On Tue, Sep 16, 2008 at 12:45 PM, Bily <hsssss1111@163.com> wrote:
> hi,all;
> I want to insert an module:yaffs.ko into my kernel2.6.26,but i meet this question:
>
> [\u@\h \W]$insmod yaffs.ko
> yaffs: unknown relocation: 40
> insmod: cannot insert 'yaffs.ko': invalid module format
>
> and my busybox version is v1.11.1; may anyone tell me why ?thanks!
>
>
> Bily
> 2008-09-13
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Re: insmod problem
2008-09-17 8:19 ` mal reddy y
@ 2008-09-17 8:27 ` Bily
2008-09-17 8:11 ` Benny Halevy
0 siblings, 1 reply; 11+ messages in thread
From: Bily @ 2008-09-17 8:27 UTC (permalink / raw)
To: mal reddy y; +Cc: linux-kernel
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="gb2312", Size: 1419 bytes --]
I am installing the linux kernel 2.6.26.2 to my AT91rm9200;I compile the kernel by using cross compiler arm-none-eabi-gcc (Sourcery G++ Lite 2008q1-126); and the kernel can run on AT91rm9200 normally;howerver if i want to insert modules into kernel ,it happen the mistake like this:
[\u@\h \W]$insmod yaffs.ko
yaffs: unknown relocation: 40
insmod: cannot insert 'yaffs.ko': invalid module format
thanks for help!~
Bily
2008-09-17
·¢¼þÈË£º mal reddy y
·¢ËÍʱ¼ä£º 2008-09-17 16:19:52
ÊÕ¼þÈË£º Bily
³ËÍ£º linux-kernel
Ö÷Ì⣺ Re: insmod problem
give clear explanation how you have installed
regards,
YMR
On Tue, Sep 16, 2008 at 12:45 PM, Bily <hsssss1111@163.com > wrote:
> hi,all;
> I want to insert an module:yaffs.ko into my kernel2.6.26,but i meet this question:
>
> [\u@\h \W]$insmod yaffs.ko
> yaffs: unknown relocation: 40
> insmod: cannot insert 'yaffs.ko': invalid module format
>
> and my busybox version is v1.11.1; may anyone tell me why ?thanks!
>
>
> Bily
> 2008-09-13
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
ÿôèº{.nÇ+‰·Ÿ®‰†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a¢f£¢·hšïêÿ‘êçz_è®\x03(階ŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨èÚ&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: insmod problem
2008-09-17 8:27 ` Bily
@ 2008-09-17 8:11 ` Benny Halevy
2008-09-18 0:44 ` Bily
0 siblings, 1 reply; 11+ messages in thread
From: Benny Halevy @ 2008-09-17 8:11 UTC (permalink / raw)
To: Bily; +Cc: mal reddy y, linux-kernel
Can you please provide your .config file?
I'm mostly curious about
CONFIG_MODVERSIONS
CONFIG_MODULE_FORCE_LOAD
Benny
On Sep. 17, 2008, 3:27 -0500, "Bily" <hsssss1111@163.com> wrote:
> I am installing the linux kernel 2.6.26.2 to my AT91rm9200;I compile the kernel by using cross compiler arm-none-eabi-gcc (Sourcery G++ Lite 2008q1-126); and the kernel can run on AT91rm9200 normally;howerver if i want to insert modules into kernel ,it happen the mistake like this:
>
> [\u@\h \W]$insmod yaffs.ko
> yaffs: unknown relocation: 40
> insmod: cannot insert 'yaffs.ko': invalid module format
>
> thanks for help!~
>
>
>
>
>
> Bily
> 2008-09-17
>
>
>
> 发件人： mal reddy y
> 发送时间： 2008-09-17 16:19:52
> 收件人： Bily
> 抄送： linux-kernel
> 主题： Re: insmod problem
>
> give clear explanation how you have installed
>
> regards,
> YMR
>
> On Tue, Sep 16, 2008 at 12:45 PM, Bily <hsssss1111@163.com > wrote:
>> hi,all;
>> I want to insert an module:yaffs.ko into my kernel2.6.26,but i meet this question:
>>
>> [\u@\h \W]$insmod yaffs.ko
>> yaffs: unknown relocation: 40
>> insmod: cannot insert 'yaffs.ko': invalid module format
>>
>> and my busybox version is v1.11.1; may anyone tell me why ?thanks!
>>
>>
>> Bily
>> 2008-09-13
>>
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>> Please read the FAQ at http://www.tux.org/lkml/
>>
> N嫥叉靣笡y氊b瞂千v豝�)藓{.n�+壏{睉赙zXФ\x17洝塄}财爖�&j:+v墾�\a珣赙zZ+€�+zf＂穐殘啳嗃i�z�\x1e畐ア�?櫒璀�&�)撷^[f旟^j谦y呩@A玜囤\x7f�\f0鹅h�\x0f鍜i\x7f
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: Re: insmod problem
2008-09-17 8:11 ` Benny Halevy
@ 2008-09-18 0:44 ` Bily
2008-09-18 19:13 ` Benny Halevy
0 siblings, 1 reply; 11+ messages in thread
From: Bily @ 2008-09-18 0:44 UTC (permalink / raw)
To: Benny Halevy; +Cc: mal reddy y, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 2160 bytes --]
hi,Benny
here is my kernel2.6.26.2 .config file; and both the CONFIG_MODVERSIONS and CONFIG_MODULE_FORCE_LOAD is not set.thanks!~
Bily
2008-09-18
发件人： Benny Halevy
发送时间： 2008-09-17 21:11:54
收件人： Bily
抄送： mal reddy y; linux-kernel
主题： Re: insmod problem
Can you please provide your .config file?
I'm mostly curious about
CONFIG_MODVERSIONS
CONFIG_MODULE_FORCE_LOAD
Benny
On Sep. 17, 2008, 3:27 -0500, "Bily" <hsssss1111@163.com > wrote:
> I am installing the linux kernel 2.6.26.2 to my AT91rm9200;I compile the kernel by using cross compiler arm-none-eabi-gcc (Sourcery G++ Lite 2008q1-126); and the kernel can run on AT91rm9200 normally;howerver if i want to insert modules into kernel ,it happen the mistake like this:
>
> [\u@\h \W]$insmod yaffs.ko
> yaffs: unknown relocation: 40
> insmod: cannot insert 'yaffs.ko': invalid module format
>
> thanks for help!~
>
>
>
>
>
> Bily
> 2008-09-17
>
>
>
> 发件人： mal reddy y
> 发送时间： 2008-09-17 16:19:52
> 收件人： Bily
> 抄送： linux-kernel
> 主题： Re: insmod problem
>
> give clear explanation how you have installed
>
> regards,
> YMR
>
> On Tue, Sep 16, 2008 at 12:45 PM, Bily <hsssss1111@163.com > wrote:
> > hi,all;
> > I want to insert an module:yaffs.ko into my kernel2.6.26,but i meet this question:
> >
> > [\u@\h \W]$insmod yaffs.ko
> > yaffs: unknown relocation: 40
> > insmod: cannot insert 'yaffs.ko': invalid module format
> >
> > and my busybox version is v1.11.1; may anyone tell me why ?thanks!
> >
> >
> > Bily
> > 2008-09-13
> >
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at http://www.tux.org/lkml/
> >
> N嫥叉靣笡y氊b瞂千v豝�)藓{.n�+壏{睉赙zXФ\x17洝塄}财爖�&j:+v墾�\a珣赙zZ+€�+zf＂穐殘啳嗃i�z�\x1e畐ア�?櫒璀�&�)撷^[f旟^j谦y呩@A玜囤\x7f�
0鹅h�\x0f鍜i\x7f
[-- Attachment #2: .config --]
[-- Type: application/octet-stream, Size: 23036 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.26.2
# Wed Sep 17 17:03:09 2008
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_ZONE_DMA=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
#
# System Type
#
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
CONFIG_ARCH_AT91=y
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_MSM7X00A is not set
#
# Boot options
#
#
# Power management
#
#
# Atmel AT91 System-on-Chip
#
CONFIG_ARCH_AT91RM9200=y
# CONFIG_ARCH_AT91SAM9260 is not set
# CONFIG_ARCH_AT91SAM9261 is not set
# CONFIG_ARCH_AT91SAM9263 is not set
# CONFIG_ARCH_AT91SAM9RL is not set
# CONFIG_ARCH_AT91CAP9 is not set
# CONFIG_ARCH_AT91X40 is not set
CONFIG_AT91_PMC_UNIT=y
#
# AT91RM9200 Board Type
#
# CONFIG_MACH_ONEARM is not set
CONFIG_ARCH_AT91RM9200DK=y
# CONFIG_MACH_AT91RM9200EK is not set
# CONFIG_MACH_CSB337 is not set
# CONFIG_MACH_CSB637 is not set
# CONFIG_MACH_CARMEVA is not set
# CONFIG_MACH_ATEB9200 is not set
# CONFIG_MACH_KB9200 is not set
# CONFIG_MACH_PICOTUX2XX is not set
# CONFIG_MACH_KAFA is not set
# CONFIG_MACH_CHUB is not set
# CONFIG_MACH_HOMEMATIC is not set
# CONFIG_MACH_ECBAT91 is not set
# CONFIG_MACH_SWEDATMS is not set
# CONFIG_MACH_TT9200 is not set
# CONFIG_MACH_YL9200 is not set
#
# AT91 Board Options
#
# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
#
# AT91 Feature Selections
#
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
CONFIG_AT91_TIMER_HZ=128
CONFIG_AT91_EARLY_DBGU=y
# CONFIG_AT91_EARLY_USART0 is not set
# CONFIG_AT91_EARLY_USART1 is not set
# CONFIG_AT91_EARLY_USART2 is not set
# CONFIG_AT91_EARLY_USART3 is not set
# CONFIG_AT91_EARLY_USART4 is not set
# CONFIG_AT91_EARLY_USART5 is not set
#
# Processor Type
#
CONFIG_CPU_32=y
CONFIG_CPU_ARM920T=y
CONFIG_CPU_32v4T=y
CONFIG_CPU_ABRT_EV4T=y
CONFIG_CPU_PABRT_NOIFAR=y
CONFIG_CPU_CACHE_V4WT=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_TLB_V4WBI=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
# CONFIG_ARM_THUMB is not set
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
# CONFIG_OUTER_CACHE is not set
#
# Bus support
#
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
#
# Kernel Features
#
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_PREEMPT=y
CONFIG_HZ=128
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
CONFIG_ALIGNMENT_TRAP=y
#
# Boot options
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE=""
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
#
# Floating point emulation
#
#
# At least one emulation must be selected
#
# CONFIG_FPE_NWFPE is not set
# CONFIG_FPE_FASTFPE is not set
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
# CONFIG_PM is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_PACKET is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
CONFIG_MTD_MAP_BANK_WIDTH_2=y
# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
# CONFIG_MTD_CFI_I2 is not set
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_START=0x10000000
CONFIG_MTD_PHYSMAP_LEN=0x1000000
CONFIG_MTD_PHYSMAP_BANKWIDTH=0
CONFIG_MTD_ARM_INTEGRATOR=y
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
CONFIG_MTD_BLOCK2MTD=y
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
CONFIG_MTD_NAND_AT91=y
CONFIG_MTD_NAND_AT91_ECC_SOFT=y
# CONFIG_MTD_NAND_AT91_ECC_HW is not set
# CONFIG_MTD_NAND_AT91_ECC_NONE is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ONENAND is not set
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
CONFIG_DAVICOM_PHY=y
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_ARM_AT91_ETHER=y
# CONFIG_AX88796 is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=y
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_PPP_DEFLATE is not set
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=y
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=y
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
# CONFIG_SERIAL_ATMEL_PDC is not set
# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_AT91_SPI is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_WATCHDOG is not set
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
#
# CONFIG_DAB is not set
#
# Graphics support
#
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=m
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_AT91RM9200=m
# CONFIG_UIO is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT2_FS_XIP=y
CONFIG_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_YAFFS_FS=m
CONFIG_YAFFS_YAFFS1=y
# CONFIG_YAFFS_9BYTE_TAGS is not set
CONFIG_YAFFS_DOES_ECC=y
CONFIG_YAFFS_ECC_WRONG_ORDER=y
CONFIG_YAFFS_YAFFS2=y
CONFIG_YAFFS_AUTO_YAFFS2=y
CONFIG_YAFFS_DISABLE_LAZY_LOAD=y
CONFIG_YAFFS_DISABLE_WIDE_TNODES=y
CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED=y
CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_ERRORS is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_LL is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: insmod problem
2008-09-18 0:44 ` Bily
@ 2008-09-18 19:13 ` Benny Halevy
0 siblings, 0 replies; 11+ messages in thread
From: Benny Halevy @ 2008-09-18 19:13 UTC (permalink / raw)
To: Bily; +Cc: mal reddy y, linux-kernel
Bily wrote:
> hi,Benny
> here is my kernel2.6.26.2 .config file; and both the CONFIG_MODVERSIONS and CONFIG_MODULE_FORCE_LOAD is not set.thanks!~
OK. These should be fine.
This seems to be the culprit:
>> yaffs: unknown relocation: 40
It indicates that apply_relocate() is failing with -ENOEXEC
where it doesn't know the r_info code "40".
It could be a problem with your cross-platform linker.
Benny
>
>
>
> Bily
> 2008-09-18
>
>
>
> 发件人： Benny Halevy
> 发送时间： 2008-09-17 21:11:54
> 收件人： Bily
> 抄送： mal reddy y; linux-kernel
> 主题： Re: insmod problem
>
> Can you please provide your .config file?
> I'm mostly curious about
> CONFIG_MODVERSIONS
> CONFIG_MODULE_FORCE_LOAD
>
> Benny
>
> On Sep. 17, 2008, 3:27 -0500, "Bily" <hsssss1111@163.com > wrote:
>> I am installing the linux kernel 2.6.26.2 to my AT91rm9200;I compile the kernel by using cross compiler arm-none-eabi-gcc (Sourcery G++ Lite 2008q1-126); and the kernel can run on AT91rm9200 normally;howerver if i want to insert modules into kernel ,it happen the mistake like this:
>>
>> [\u@\h \W]$insmod yaffs.ko
>> yaffs: unknown relocation: 40
>> insmod: cannot insert 'yaffs.ko': invalid module format
>>
>> thanks for help!~
>>
>>
>>
>>
>>
>> Bily
>> 2008-09-17
>>
>>
>>
>> 发件人： mal reddy y
>> 发送时间： 2008-09-17 16:19:52
>> 收件人： Bily
>> 抄送： linux-kernel
>> 主题： Re: insmod problem
>>
>> give clear explanation how you have installed
>>
>> regards,
>> YMR
>>
>> On Tue, Sep 16, 2008 at 12:45 PM, Bily <hsssss1111@163.com > wrote:
>>> hi,all;
>>> I want to insert an module:yaffs.ko into my kernel2.6.26,but i meet this question:
>>>
>>> [\u@\h \W]$insmod yaffs.ko
>>> yaffs: unknown relocation: 40
>>> insmod: cannot insert 'yaffs.ko': invalid module format
>>>
>>> and my busybox version is v1.11.1; may anyone tell me why ?thanks!
>>>
>>>
>>> Bily
>>> 2008-09-13
>>>
>>>
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>>> the body of a message to majordomo@vger.kernel.org
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>> Please read the FAQ at http://www.tux.org/lkml/
>>>
>> N嫥叉靣笡y氊b瞂千v豝�)藓{.n�+壏{睉赙zXФ\x17洝塄}财爖�&j:+v墾�\a珣赙zZ+€�+zf＂穐殘啳嗃i�z�\x1e畐ア�?櫒璀�&�)撷^[f旟^j谦y呩@A玜囤\x7f�
> 0鹅h�\x0f鍜i\x7f
^ permalink raw reply [flat|nested] 11+ messages in thread
* insmod problem
@ 2005-05-13 12:33 Marco Schramel
2005-05-13 12:46 ` Pantelis Antoniou
0 siblings, 1 reply; 11+ messages in thread
From: Marco Schramel @ 2005-05-13 12:33 UTC (permalink / raw)
To: PPC_LINUX
Hi,
we use a custom mpc8270 system. Everything works fine.
Now i have to handle some float values in a device driver. If i insert the compiled module my target prints out
insmod: unresolved symbol __addsf3
insmod: unresolved symbol __floatsisf
Are there any missing libraries ?
Any other ideas?
Best regards
Marco
--
---------
Marco Schramel
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: insmod problem
2005-05-13 12:33 Marco Schramel
@ 2005-05-13 12:46 ` Pantelis Antoniou
2005-05-13 13:14 ` Mark Chambers
0 siblings, 1 reply; 11+ messages in thread
From: Pantelis Antoniou @ 2005-05-13 12:46 UTC (permalink / raw)
To: Marco Schramel; +Cc: PPC_LINUX
Marco Schramel wrote:
> Hi,
>
> we use a custom mpc8270 system. Everything works fine.
> Now i have to handle some float values in a device driver. If i insert the compiled module my target prints out
>
> insmod: unresolved symbol __addsf3
> insmod: unresolved symbol __floatsisf
>
> Are there any missing libraries ?
>
> Any other ideas?
>
> Best regards
>
> Marco
>
>
You're using floating arithmetic in the kernel.
That's not supported.
Regards
Pantelis
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: insmod problem
2005-05-13 12:46 ` Pantelis Antoniou
@ 2005-05-13 13:14 ` Mark Chambers
2005-05-13 13:46 ` Kumar Gala
0 siblings, 1 reply; 11+ messages in thread
From: Mark Chambers @ 2005-05-13 13:14 UTC (permalink / raw)
To: Pantelis Antoniou; +Cc: PPC_LINUX
>
>
> You're using floating arithmetic in the kernel.
>
> That's not supported.
>
> Regards
>
> Pantelis
>
Just for my edification: Is floating point itself not supported (floating
point register
corruption or something like that) or just linking to user space libraries?
Mark Chambers
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: insmod problem
2005-05-13 13:14 ` Mark Chambers
@ 2005-05-13 13:46 ` Kumar Gala
0 siblings, 0 replies; 11+ messages in thread
From: Kumar Gala @ 2005-05-13 13:46 UTC (permalink / raw)
To: Mark Chambers; +Cc: PPC_LINUX
On May 13, 2005, at 8:14 AM, Mark Chambers wrote:
> >
> >
> > You're using floating arithmetic in the kernel.
> >
> > That's not supported.
> >
> > Regards
> >
> > Pantelis
> >
>
> Just for my edification:=A0 Is floating point itself not supported=20
> (floating
> point register
> corruption or something like that) or just linking to user space=20
> libraries?
Use of floating point registers and instructions. Its possible to use=20=
FP in rare cases inside the kernel buts its extremely discouraged.
- kumar
^ permalink raw reply [flat|nested] 11+ messages in thread
* insmod problem
@ 2005-01-25 4:46 Muruganandam
0 siblings, 0 replies; 11+ messages in thread
From: Muruganandam @ 2005-01-25 4:46 UTC (permalink / raw)
To: linux-kernel
When i execute the command insmod module.o ,its giving the eror version
mismatch.i am using the kernel 2.4.21-4.el.but it says 2.4.20.what is
the problem.
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2008-09-18 19:28 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-09-16 7:15 insmod problem Bily
2008-09-17 8:19 ` mal reddy y
2008-09-17 8:27 ` Bily
2008-09-17 8:11 ` Benny Halevy
2008-09-18 0:44 ` Bily
2008-09-18 19:13 ` Benny Halevy
-- strict thread matches above, loose matches on Subject: below --
2005-05-13 12:33 Marco Schramel
2005-05-13 12:46 ` Pantelis Antoniou
2005-05-13 13:14 ` Mark Chambers
2005-05-13 13:46 ` Kumar Gala
2005-01-25 4:46 Muruganandam
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.