* [linux-dvb] tda1004x+saa7162+ PCTV 7010ix @ 2008-09-25 15:13 Wieslaw Kierbedz 2008-09-26 7:41 ` Wieslaw Kierbedz 0 siblings, 1 reply; 3+ messages in thread From: Wieslaw Kierbedz @ 2008-09-25 15:13 UTC (permalink / raw) To: linux-dvb Hi. I found, that Twinhan 6090 and my Pinnacle PCTV 7010ix have same components. First I added definitions to Manu's driver. saa716x_hybrid loaded successfully, udev created devices. Now the questions. How to check does it works without frontend? Is tda1004x just usable? I compiled and loaded it but it ignored my card. Then, how to force tda1004x to load firmware, check devices and create device file? I know, both drivers saa716x and tda1004x are very experimental. But simply wait is a little to hard for me. P.S. Extremaly lame. Don't shoot please. -- WK ---------------------------------------------------------------------- Znajdź mieszkanie w Twoim regionie! kliknij >>> http://link.interia.pl/f1f19 _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [linux-dvb] tda1004x+saa7162+ PCTV 7010ix 2008-09-25 15:13 [linux-dvb] tda1004x+saa7162+ PCTV 7010ix Wieslaw Kierbedz @ 2008-09-26 7:41 ` Wieslaw Kierbedz 2008-09-26 17:07 ` [linux-dvb] Common carrier_width Igor M. Liplianin 0 siblings, 1 reply; 3+ messages in thread From: Wieslaw Kierbedz @ 2008-09-26 7:41 UTC (permalink / raw) To: linux-dvb Wieslaw Kierbedz wrote: > Is tda1004x just usable? > I compiled and loaded it but it ignored my card. > Then, how to force tda1004x to load firmware, check devices and create > device file? I suppose I found. There is only demodulator definition for saa716x_averhc82_zl10353. To enable others I have to write saa716x_7010ix_tda1004x_config (for example) code? Has that some sens to adjust functions from other drivers? saa7134-dvb td1316? -- WK ---------------------------------------------------------------------- Znajdź mieszkanie w Twoim regionie! kliknij >>> http://link.interia.pl/f1f19 _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb ^ permalink raw reply [flat|nested] 3+ messages in thread
* [linux-dvb] Common carrier_width 2008-09-26 7:41 ` Wieslaw Kierbedz @ 2008-09-26 17:07 ` Igor M. Liplianin 0 siblings, 0 replies; 3+ messages in thread From: Igor M. Liplianin @ 2008-09-26 17:07 UTC (permalink / raw) To: linux-dvb Would it be a common thing to implement calculation of carrier width? static u32 carrier_width(u32 symbol_rate, fe_rolloff_t rolloff) { u32 rlf; switch(rolloff) { case ROLLOFF_20: rlf = 20; break; case ROLLOFF_25: rlf = 25; break; default: rlf = 35; break; } return (symbol_rate + (symbol_rate * rlf) / 100); } Igor _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2008-09-26 17:07 UTC | newest] Thread overview: 3+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2008-09-25 15:13 [linux-dvb] tda1004x+saa7162+ PCTV 7010ix Wieslaw Kierbedz 2008-09-26 7:41 ` Wieslaw Kierbedz 2008-09-26 17:07 ` [linux-dvb] Common carrier_width Igor M. Liplianin
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.