* RE: "SCR access via SIDPR is available but doesn't work"
2008-10-08 21:50 ` Tejun Heo
@ 2008-10-09 11:14 ` Rob Whitton
2008-10-13 7:28 ` Tejun Heo
0 siblings, 1 reply; 5+ messages in thread
From: Rob Whitton @ 2008-10-09 11:14 UTC (permalink / raw)
To: Tejun Heo; +Cc: linux-ide
[-- Attachment #1: Type: text/plain, Size: 2779 bytes --]
> -----Original Message-----
> From: Tejun Heo [mailto:tj@kernel.org]
> Sent: 08 October 2008 22:50
> To: Rob Whitton
> Cc: linux-ide@vger.kernel.org
> Subject: Re: "SCR access via SIDPR is available but doesn't work"
>
> Tejun Heo wrote:
> > Rob Whitton wrote:
> >> I have run this test and I can confirm that NumLock does still
work,
> >> although unreliably. What I mean by this is that once we get to
this
> >> point often it takes a number of presses of numlock to get the
state
> of
> >> the LED to change. Before we get to this point it seems to behave
> fine.
> >> Ctrl-alt-sysrq-t doesn't appear to dump anything to the console.
> After
> >> doing ctrl-alt-sysrq-t numlock no longer functions at all.
> >>
> >> Something I forgot to mention in my original email is that using
> >> "noapic" at boot is also a work around for the problem. It isn't an
> >> option for us as we are going to be using advanced features such as
> MSI
> >> that are only available via the APIC route.
> >
> > I don't think MSI has anything to do with noapic. Can you please
> post
> > the result of "lspci -nn"? Also, what kind of motherboard is it?
>
> Oh.. and one more thing, can you please confirm that commenting out
> PIIX_FLAG_SIDPR settings in piix_port_info structures fix the problem?
>
> Thanks.
>
> --
> Tejun
We experience the same problem with two different motherboards (the only
motherboards we have tried in this system):
TYAN S5211
Intel S3210SHLC
The original boot logs were from the Tyan motherboard which is what we
have been working with almost exclusively. However, in the lab we
currently have the Intel board in use and as such I've recreated the
failing and succeeding boot logs on the Intel board so that the boots
logs are consistent with the output of "lspci -nn" which is also
attached.
With regard to changing piix_port_info structures this will have to wait
for the moment. Our kernel building expert is currently on vacation. But
maybe this step will be unnecessary - see below.
I note that in the Intel boot logs whilst booting stops at the same
point it doesn't display the message which started this thread and
tended to point the finger of suspicion at the PIIX driver (probably
should change the subject line of the email). Maybe it is a more
fundamental kernel problem? I'm still very surprised that simply moving
the SATA disk between ports causes this problem. Maybe it relates to
interrupt routing or similar. I assume that the two SATA controllers in
the Intel chipset use different interrupts.
Thank you for your info regarding "noapic" and "MSI". We will look into
this more thoroughly but are some way from that point at the moment.
Cheers
Rob
[-- Attachment #2: intel_rob_s5.cap --]
[-- Type: application/octet-stream, Size: 38250 bytes --]
Stopping X font server: xfs[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 2.6.25-2-amd64 (Debian 2.6.25-7) (maks@debian.org)
(gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Mon Jul 14 11
:05:23 UTC 2008
[ 0.000000] Command line: root=UUID=5475086d-47aa-426f-80b8-b4d25a7327f1 ro c
onsole=ttyS0,115200 loglevel=8
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfcf0000 (usable)
[ 0.000000] BIOS-e820: 00000000bfcf0000 - 00000000bfd96000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfd96000 - 00000000bfdfd000 (usable)
[ 0.000000] BIOS-e820: 00000000bfdfd000 - 00000000bfe5f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfe5f000 - 00000000bfe6a000 (usable)
[ 0.000000] BIOS-e820: 00000000bfe6a000 - 00000000bfedf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfedf000 - 00000000bfee7000 (usable)
[ 0.000000] BIOS-e820: 00000000bfee7000 - 00000000bfeff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfeff000 - 00000000bff00000 (usable)
[ 0.000000] BIOS-e820: 00000000bff00000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 00000000fff8c000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000240000000 (usable)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 785648) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 785814, 785917) 2 entries of 3200 us
ed
[ 0.000000] Entering add_active_range(0, 786015, 786026) 3 entries of 3200 us
ed
[ 0.000000] Entering add_active_range(0, 786143, 786151) 4 entries of 3200 us
ed
[ 0.000000] Entering add_active_range(0, 786175, 786176) 5 entries of 3200 us
ed
[ 0.000000] Entering add_active_range(0, 1048576, 2359296) 6 entries of 3200
used
[ 0.000000] end_pfn_map = 2359296
[ 0.000000] DMI 2.5 present.
[ 0.000000] ACPI: RSDP 000F03C0, 0024 (r2 INTEL )
[ 0.000000] ACPI: XSDT BFEFE120, 009C (r1 INTEL S3200SHC 0 INTL 1000
013)
[ 0.000000] ACPI: FACP BFEFB000, 00F4 (r3 INTEL S3200SHC 0 MSFT 1000
013)
[ 0.000000] ACPI: DSDT BFEF5000, 568D (r1 INTEL S3200SHC 0 MSFT 1000
013)
[ 0.000000] ACPI: FACS BFE6A000, 0040
[ 0.000000] ACPI: APIC BFEF4000, 0084 (r1 INTEL S3200SHC 0 MSFT 1000
013)
[ 0.000000] ACPI: WDDT BFEF3000, 0040 (r1 INTEL S3200SHC 0 MSFT 1000
013)
[ 0.000000] ACPI: MCFG BFEF2000, 003C (r1 INTEL S3200SHC 0 MSFT 1000
013)
[ 0.000000] ACPI: SPCR BFEF1000, 0050 (r1 INTEL S3200SHC 0 MSFT 1000
013)
[ 0.000000] ACPI: DMAR BFEF0000, 0110 (r1 INTEL S3200SHC 1 MSFT 1000
013)
[ 0.000000] ACPI: SSDT BFEEF000, 0175 (r1 INTEL Cpu0Ist 10 MSFT 1000
013)
[ 0.000000] ACPI: SSDT BFEEE000, 0175 (r1 INTEL Cpu1Ist 10 MSFT 1000
013)
[ 0.000000] ACPI: SSDT BFEED000, 0175 (r1 INTEL Cpu2Ist 10 MSFT 1000
013)
[ 0.000000] ACPI: SSDT BFEEC000, 0175 (r1 INTEL Cpu3Ist 10 MSFT 1000
013)
[ 0.000000] ACPI: SSDT BFEEB000, 01BC (r1 INTEL CpuPm 10 MSFT 1000
013)
[ 0.000000] ACPI: HEST BFEEA000, 00A8 (r1 INTEL S3200SHC 1 INTL
1)
[ 0.000000] ACPI: BERT BFEE9000, 0030 (r1 INTEL S3200SHC 1 INTL
1)
[ 0.000000] ACPI: ERST BFEE8000, 0230 (r1 INTEL S3200SHC 1 INTL
1)
[ 0.000000] ACPI: EINJ BFEE7000, 0130 (r1 INTEL S3200SHC 1 INTL
1)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000240000000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 785648) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 785814, 785917) 2 entries of 3200 us
ed
[ 0.000000] Entering add_active_range(0, 786015, 786026) 3 entries of 3200 us
ed
[ 0.000000] Entering add_active_range(0, 786143, 786151) 4 entries of 3200 us
ed
[ 0.000000] Entering add_active_range(0, 786175, 786176) 5 entries of 3200 us
ed
[ 0.000000] Entering add_active_range(0, 1048576, 2359296) 6 entries of 3200
used
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000240000000
[ 0.000000] NODE_DATA [0000000000012000 - 0000000000018fff]
[ 0.000000] bootmap [0000000000019000 - 0000000000060fff] pages 48
[ 0.000000] early res: 0 [0-fff] BIOS data page
[ 0.000000] early res: 1 [6000-7fff] SMP_TRAMPOLINE
[ 0.000000] early res: 2 [200000-63d2f7] TEXT DATA BSS
[ 0.000000] early res: 3 [378fb000-37fef756] RAMDISK
[ 0.000000] early res: 4 [9fc00-a0bff] EBDA
[ 0.000000] early res: 5 [8000-11fff] PGTABLE
[ 0.000000] [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on no
de 0
[ 0.000000] [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on no
de 0
[ 0.000000] [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on no
de 0
[ 0.000000] [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on no
de 0
[ 0.000000] [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on no
de 0
[ 0.000000] [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on no
de 0
[ 0.000000] [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on no
de 0
[ 0.000000] [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on no
de 0
[ 0.000000] [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on no
de 0
[ 0.000000] [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on no
de 0
[ 0.000000] [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on no
de 0
[ 0.000000] [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on no
de 0
[ 0.000000] [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on no
de 0
[ 0.000000] [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on no
de 0
[ 0.000000] [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on no
de 0
[ 0.000000] [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on no
de 0
[ 0.000000] [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on no
de 0
[ 0.000000] [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on no
de 0
[ 0.000000] [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on no
de 0
[ 0.000000] [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on no
de 0
[ 0.000000] [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on no
de 0
[ 0.000000] [ffffe20003800000-ffffe200039fffff] PMD ->ffff810006600000 on no
de 0
[ 0.000000] [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810006a00000 on no
de 0
[ 0.000000] [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810006e00000 on no
de 0
[ 0.000000] [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810007200000 on no
de 0
[ 0.000000] [ffffe20004000000-ffffe200041fffff] PMD ->ffff810007600000 on no
de 0
[ 0.000000] [ffffe20004200000-ffffe200043fffff] PMD ->ffff810007a00000 on no
de 0
[ 0.000000] [ffffe20004400000-ffffe200045fffff] PMD ->ffff810007e00000 on no
de 0
[ 0.000000] [ffffe20004600000-ffffe200047fffff] PMD ->ffff810008200000 on no
de 0
[ 0.000000] [ffffe20004800000-ffffe200049fffff] PMD ->ffff810008600000 on no
de 0
[ 0.000000] [ffffe20004a00000-ffffe20004bfffff] PMD ->ffff810008a00000 on no
de 0
[ 0.000000] [ffffe20004c00000-ffffe20004dfffff] PMD ->ffff810008e00000 on no
de 0
[ 0.000000] [ffffe20004e00000-ffffe20004ffffff] PMD ->ffff810009200000 on no
de 0
[ 0.000000] [ffffe20005000000-ffffe200051fffff] PMD ->ffff810009600000 on no
de 0
[ 0.000000] [ffffe20005200000-ffffe200053fffff] PMD ->ffff810009a00000 on no
de 0
[ 0.000000] [ffffe20005400000-ffffe200055fffff] PMD ->ffff810009e00000 on no
de 0
[ 0.000000] [ffffe20005600000-ffffe200057fffff] PMD ->ffff81000a200000 on no
de 0
[ 0.000000] [ffffe20005800000-ffffe200059fffff] PMD ->ffff81000a600000 on no
de 0
[ 0.000000] [ffffe20005a00000-ffffe20005bfffff] PMD ->ffff81000aa00000 on no
de 0
[ 0.000000] [ffffe20005c00000-ffffe20005dfffff] PMD ->ffff81000ae00000 on no
de 0
[ 0.000000] [ffffe20005e00000-ffffe20005ffffff] PMD ->ffff81000b200000 on no
de 0
[ 0.000000] [ffffe20006000000-ffffe200061fffff] PMD ->ffff81000b600000 on no
de 0
[ 0.000000] [ffffe20006200000-ffffe200063fffff] PMD ->ffff81000ba00000 on no
de 0
[ 0.000000] [ffffe20006400000-ffffe200065fffff] PMD ->ffff81000be00000 on no
de 0
[ 0.000000] [ffffe20006600000-ffffe200067fffff] PMD ->ffff81000c200000 on no
de 0
[ 0.000000] [ffffe20006800000-ffffe200069fffff] PMD ->ffff81000c600000 on no
de 0
[ 0.000000] [ffffe20006a00000-ffffe20006bfffff] PMD ->ffff81000ca00000 on no
de 0
[ 0.000000] [ffffe20006c00000-ffffe20006dfffff] PMD ->ffff81000ce00000 on no
de 0
[ 0.000000] [ffffe20006e00000-ffffe20006ffffff] PMD ->ffff81000d200000 on no
de 0
[ 0.000000] [ffffe20007000000-ffffe200071fffff] PMD ->ffff81000d600000 on no
de 0
[ 0.000000] [ffffe20007200000-ffffe200073fffff] PMD ->ffff81000da00000 on no
de 0
[ 0.000000] [ffffe20007400000-ffffe200075fffff] PMD ->ffff81000de00000 on no
de 0
[ 0.000000] [ffffe20007600000-ffffe200077fffff] PMD ->ffff81000e200000 on no
de 0
[ 0.000000] [ffffe20007800000-ffffe200079fffff] PMD ->ffff81000e600000 on no
de 0
[ 0.000000] [ffffe20007a00000-ffffe20007bfffff] PMD ->ffff81000ea00000 on no
de 0
[ 0.000000] [ffffe20007c00000-ffffe20007dfffff] PMD ->ffff81000ee00000 on no
de 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 2359296
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[7] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 785648
[ 0.000000] 0: 785814 -> 785917
[ 0.000000] 0: 786015 -> 786026
[ 0.000000] 0: 786143 -> 786151
[ 0.000000] 0: 786175 -> 786176
[ 0.000000] 0: 1048576 -> 2359296
[ 0.000000] On node 0 totalpages: 2096394
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1101 pages reserved
[ 0.000000] DMA zone: 2842 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 767395 pages, LIFO batch:31
[ 0.000000] Normal zone: 17920 pages used for memmap
[ 0.000000] Normal zone: 1292800 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 5, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bfcf0000 - 00000000bfd96000
[ 0.000000] PM: Registered nosave memory: 00000000bfdfd000 - 00000000bfe5f000
[ 0.000000] PM: Registered nosave memory: 00000000bfe6a000 - 00000000bfedf000
[ 0.000000] PM: Registered nosave memory: 00000000bfee7000 - 00000000bfeff000
[ 0.000000] PM: Registered nosave memory: 00000000bff00000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fff80000
[ 0.000000] PM: Registered nosave memory: 00000000fff80000 - 00000000fff8c000
[ 0.000000] PM: Registered nosave memory: 00000000fff8c000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:3000
0000)
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PERCPU: Allocating 35096 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag
es: 2063037
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=UUID=5475086d-47aa-426f-80b8-b4d25a7327
f1 ro console=ttyS0,115200 loglevel=8
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] TSC calibrated against PM_TIMER
[ 0.000001] time.c: Detected 2659.999 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [ttyS0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.004000] Placing software IO TLB between 0xf033000 - 0x13033000
[ 0.004000] Memory: 8192756k/9437184k available (2184k kernel code, 192820k r
eserved, 1012k data, 372k init)
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.084007] Calibrating delay using timer specific routine.. 5324.08 BogoMIPS
(lpj=10648177)
[ 0.092038] Security Framework initialized
[ 0.096010] SELinux: Disabled at boot.
[ 0.100010] Capability LSM initialized
[ 0.104583] Dentry cache hash table entries: 1048576 (order: 11, 8388608 byte
s)
[ 0.114655] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.120227] Mount-cache hash table entries: 256
[ 0.124128] Initializing cgroup subsys ns
[ 0.128013] Initializing cgroup subsys cpuacct
[ 0.132027] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.140010] CPU: L2 cache: 4096K
[ 0.143599] CPU 0/0 -> Node 0
[ 0.144011] CPU: Physical Processor ID: 0
[ 0.148011] CPU: Processor Core ID: 0
[ 0.152017] CPU0: Thermal monitoring enabled (TM2)
[ 0.156011] using mwait in idle threads.
[ 0.160669] ACPI: Core revision 20070126
[ 0.219342] Using local APIC timer interrupts.
[ 0.224015] APIC timer calibration result 20781243
[ 0.228015] Detected 20.781 MHz APIC timer.
[ 0.232129] Booting processor 1/2 APIC 0x1
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 5320.00 BogoMIPS
(lpj=10640013)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU 1/1 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.004000] Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz stepping 0b
[ 0.324539] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.328054] Brought up 2 CPUs
[ 0.332105] CPU0 attaching sched-domain:
[ 0.336039] domain 0: span 00000003
[ 0.340039] groups: 00000001 00000002
[ 0.345126] domain 1: span 00000003
[ 0.349501] groups: 00000003
[ 0.353126] CPU1 attaching sched-domain:
[ 0.356040] domain 0: span 00000003
[ 0.361501] groups: 00000002 00000001
[ 0.366008] domain 1: span 00000003
[ 0.369502] groups: 00000003
[ 0.373332] net_namespace: 1016 bytes
[ 0.376043] Booting paravirtualized kernel on bare hardware
[ 0.380188] NET: Registered protocol family 16
[ 0.384178] ACPI: bus type pci registered
[ 0.401102] PCI: Using MMCONFIG at f0000000 - ffffffff
[ 0.404043] PCI: Using configuration type 1
[ 0.412764] ACPI: EC: Look up EC in DSDT
[ 0.420107] ACPI: Interpreter enabled
[ 0.424045] ACPI: (supports S0 S1 S4 S5)
[ 0.428345] ACPI: Using IOAPIC for interrupt routing
[ 0.437597] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.440648] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.444048] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GP
IO/TCO
[ 0.448047] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 0.452460] PCI: Transparent bridge - 0000:00:1e.0
[ 0.460062] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.464436] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE6._PRT]
[ 0.468162] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 0.472234] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.476166] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.487405] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.490472] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.498268] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.505858] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.513151] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.520752] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.528140] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.534472] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.538687] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.540071] pnp: PnP ACPI init
[ 0.544056] ACPI: bus type pnp registered
[ 0.548777] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.557137] 00:01: calling quirk 0xffffffff8035ba3a: quirk_system_pci_resour
ces+0x0/0x173()
[ 0.564083] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.570187] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.573950] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.581165] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.588090] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.596064] 00:06: calling quirk 0xffffffff8035ba3a: quirk_system_pci_resour
ces+0x0/0x173()
[ 0.604087] pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.612487] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.620450] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.628117] pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active
)
[ 0.636117] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active
)
[ 0.644443] pnp 00:0b: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.652133] pnp 00:0c: Plug and Play ACPI device, IDs PNP0003 (active)
[ 0.657971] pnp: PnP ACPI: found 13 devices
[ 0.660059] ACPI: ACPI bus type pnp unregistered
[ 0.664184] usbcore: registered new interface driver usbfs
[ 0.668097] usbcore: registered new interface driver hub
[ 0.672087] usbcore: registered new device driver usb
[ 0.676152] PCI: Using ACPI for IRQ routing
[ 0.680060] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 0.700068] PCI-GART: No AMD northbridge found.
[ 0.704144] hpet clockevent registered
[ 0.708064] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.713373] hpet0: 4 64-bit timers, 14318180 Hz
[ 0.717084] ACPI: RTC can wake from S4
[ 0.732066] pnp: the driver 'system' has been registered
[ 0.736069] system 00:01: iomem range 0xf0000000-0xf3ffffff could not be rese
rved
[ 0.740064] system 00:01: iomem range 0xfeb00000-0xfeb03fff has been reserved
[ 0.744065] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.748065] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.752065] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.756065] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.760066] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.764066] system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved
[ 0.768066] system 00:01: iomem range 0xc0000-0xdffff could not be reserved
[ 0.772066] system 00:01: iomem range 0xe0000-0xfffff could not be reserved
[ 0.776067] system 00:01: iomem range 0xffc00000-0xffffffff could not be rese
rved
[ 0.780067] system 00:01: driver attached
[ 0.784070] system 00:06: ioport range 0x500-0x53f has been reserved
[ 0.788067] system 00:06: ioport range 0x400-0x47f has been reserved
[ 0.792068] system 00:06: ioport range 0xca0-0xcaf has been reserved
[ 0.796068] system 00:06: ioport range 0x680-0x6ff has been reserved
[ 0.800068] system 00:06: ioport range 0x800-0x87f has been reserved
[ 0.804068] system 00:06: ioport range 0x600-0x61f has been reserved
[ 0.808068] system 00:06: driver attached
[ 0.812337] PCI: Bridge: 0000:00:06.0
[ 0.816069] IO window: disabled.
[ 0.820070] MEM window: disabled.
[ 0.824070] PREFETCH window: 0x00000000c0000000-0x00000000dfffffff
[ 0.828071] PCI: Bridge: 0000:00:1c.0
[ 0.832069] IO window: disabled.
[ 0.836072] MEM window: disabled.
[ 0.840071] PREFETCH window: disabled.
[ 0.844074] PCI: Bridge: 0000:00:1c.4
[ 0.848070] IO window: disabled.
[ 0.852073] MEM window: 0xe1000000-0xe18fffff
[ 0.856073] PREFETCH window: 0x00000000e0000000-0x00000000e0ffffff
[ 0.860074] PCI: Bridge: 0000:00:1e.0
[ 0.864072] IO window: 1000-1fff
[ 0.868074] MEM window: 0xe1900000-0xe19fffff
[ 0.872073] PREFETCH window: disabled.
[ 0.876082] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ
16
[ 0.884074] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 0.888084] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ
17
[ 0.896075] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.900085] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ
17
[ 0.908076] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 0.912081] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.916093] NET: Registered protocol family 2
[ 0.960257] IP route cache hash table entries: 262144 (order: 9, 2097152 byte
s)
[ 0.965115] TCP established hash table entries: 524288 (order: 11, 8388608 by
tes)
[ 0.972683] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.976473] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.980079] TCP reno registered
[ 0.996237] checking if image is initramfs...<7>Switched to high resolution m
ode on CPU 1
[ 1.208095] Switched to high resolution mode on CPU 0
[ 1.219534] it is
[ 1.450322] Freeing initrd memory: 7121k freed
[ 1.285234] audit: initializing netlink socket (disabled)
[ 1.288110] type=2000 audit(1223549029.552:1): initialized
[ 1.292589] Total HugeTLB memory allocated, 0
[ 1.296169] VFS: Disk quotas dquot_6.5.1
[ 1.300129] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.304164] io scheduler noop registered
[ 1.308100] io scheduler anticipatory registered
[ 1.312100] io scheduler deadline registered
[ 1.316107] io scheduler cfq registered (default)
[ 1.320410] pci 0000:03:00.0: Boot video device
[ 1.324163] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 1.328118] assign_interrupt_mode Found MSI capability
[ 1.332118] Allocate Port Service[0000:00:06.0:pcie00]
[ 1.336126] Allocate Port Service[0000:00:06.0:pcie03]
[ 1.340151] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 1.344124] assign_interrupt_mode Found MSI capability
[ 1.348124] Allocate Port Service[0000:00:1c.0:pcie00]
[ 1.352124] Allocate Port Service[0000:00:1c.0:pcie02]
[ 1.356124] Allocate Port Service[0000:00:1c.0:pcie03]
[ 1.360160] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 1.364125] assign_interrupt_mode Found MSI capability
[ 1.368125] Allocate Port Service[0000:00:1c.4:pcie00]
[ 1.372126] Allocate Port Service[0000:00:1c.4:pcie02]
[ 1.376126] Allocate Port Service[0000:00:1c.4:pcie03]
[ 1.385606] Real Time Clock Driver v1.12ac
[ 1.388171] Linux agpgart interface v0.103
[ 1.392105] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 1.396212] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.400203] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.404207] pnp: the driver 'serial' has been registered
[ 1.408260] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.412131] serial 00:07: driver attached
[ 1.416213] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.420131] serial 00:08: driver attached
[ 1.424646] brd: module loaded
[ 1.428149] input: Macintosh mouse button emulation as /class/input/input0
[ 1.432165] pnp: the driver 'i8042 kbd' has been registered
[ 1.436115] i8042 kbd 00:0a: driver attached
[ 1.440125] pnp: the driver 'i8042 aux' has been registered
[ 1.444116] i8042 aux 00:09: driver attached
[ 1.448127] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq
1,12
[ 1.457714] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.460111] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.484153] mice: PS/2 mouse device common for all mice
[ 1.488136] cpuidle: using governor ladder
[ 1.492111] cpuidle: using governor menu
[ 1.496358] TCP cubic registered
[ 1.500117] NET: Registered protocol family 1
[ 1.504118] NET: Registered protocol family 17
[ 1.508189] registered taskstats version 1
[ 1.512198] Freeing unused kernel memory: 372k freed
Loading, please wait...
[ 1.534002] input: AT Translated Set 2 keyboard as /class/input/input1
Couldnt get a file descriptor referring to the console
Couldnt get a file descriptor referring to the console
Couldnt get a file descriptor referring to the console
Begin: Loading essential drivers ...
Do[ 1.832419] ACPI: ACPI0007:00 is registered as cooling_device0
ne.
Begin: Runn[ 1.836276] ACPI: ACPI0007:01 is registered as cooling_device1
ing /scripts/init-premount ...
[ 1.717000] e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0
[ 1.720134] e1000e: Copyright (c) 1999-2007 Intel Corporation.
[ 1.724158] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ
20
[ 1.732133] PCI: Setting latency timer of device 0000:00:19.0 to 64
[ 1.767750] USB Universal Host Controller Interface driver v3.0
[ 1.811238] Uniform Multi-Platform E-IDE driver
[ 1.812132] ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
[ 1.846379] eth0: (PCI Express:2.5GB/s:Width x1) 00:15:17:27:67:bc
[ 1.848134] eth0: Intel(R) PRO/1000 Network Connection
[ 1.852153] eth0: MAC: 5, PHY: 6, PBA No: 0070ff-0ff
[ 1.856191] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 17 (level, low) -> IRQ
17
[ 2.142399] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
[ 2.142401] Copyright (c) 1999-2006 Intel Corporation.
[ 1.864155] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 1.868139] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.872227] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus numbe
r 1
[ 1.882920] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.884138] PCI: cache line size of 32 is not supported by device 0000:00:1a.
7
[ 1.888143] ehci_hcd 0000:00:1a.7: irq 17, io mem 0xe1a21400
[ 1.908141] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 2.222527] FDC 0 is a National Semiconductor PC87306
[ 1.912610] usb usb1: configuration #1 chosen from 1 choice
[ 1.916154] hub 1-0:1.0: USB hub found
[ 1.920142] hub 1-0:1.0: 6 ports detected
[ 1.952181] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.956141] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=
1
[ 1.960140] usb usb1: Product: EHCI Host Controller
[ 1.964140] usb usb1: Manufacturer: Linux 2.6.25-2-amd64 ehci_hcd
[ 1.968140] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.972164] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ
23
[ 1.980148] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 1.984142] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.988175] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus numbe
r 2
[ 1.998007] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.000145] PCI: cache line size of 32 is not supported by device 0000:00:1d.
7
[ 2.004148] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe1a21000
[ 2.024147] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 2.028199] usb usb2: configuration #1 chosen from 1 choice
[ 2.032159] hub 2-0:1.0: USB hub found
[ 2.036148] hub 2-0:1.0: 6 ports detected
[ 2.044183] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.048147] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=
1
[ 2.052146] usb usb2: Product: EHCI Host Controller
[ 2.056146] usb usb2: Manufacturer: Linux 2.6.25-2-amd64 ehci_hcd
[ 2.060146] usb usb2: SerialNumber: 0000:00:1d.7
[ 2.429698] ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 18 (level, low) -> IRQ
18
[ 2.436580] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 18 (level, low) -> IRQ
18
[ 2.444175] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 2.448173] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.452216] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus numbe
r 3
[ 2.456199] uhci_hcd 0000:00:1a.0: irq 18, io base 0x000020c0
[ 2.460257] usb usb3: configuration #1 chosen from 1 choice
[ 2.464188] hub 3-0:1.0: USB hub found
[ 2.468176] hub 3-0:1.0: 2 ports detected
[ 2.148875] e1000: 0000:04:02.0: e1000_probe: (PCI:33MHz:32-bit) 00:15:17:27:
67:ba
[ 2.505937] No dock devices found.
[ 2.513640] SCSI subsystem initialized
[ 2.523418] libata version 3.00 loaded.
[ 2.572234] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.576180] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=
1
[ 2.580179] usb usb3: Product: UHCI Host Controller
[ 2.584179] usb usb3: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 2.588179] usb usb3: SerialNumber: 0000:00:1a.0
[ 2.592204] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ
21
[ 2.600185] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 2.604182] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.608214] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus numbe
r 4
[ 2.612203] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000020a0
[ 2.616253] usb usb4: configuration #1 chosen from 1 choice
[ 2.620197] hub 4-0:1.0: USB hub found
[ 2.624185] hub 4-0:1.0: 2 ports detected
[ 2.317757] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 2.668232] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.672185] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=
1
[ 2.676185] usb usb4: Product: UHCI Host Controller
[ 2.680185] usb usb4: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 2.684185] usb usb4: SerialNumber: 0000:00:1a.1
[ 2.688206] ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 17 (level, low) -> IRQ
17
[ 2.696189] PCI: Setting latency timer of device 0000:00:1a.2 to 64
[ 2.700188] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 2.704217] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus numbe
r 5
[ 2.708205] uhci_hcd 0000:00:1a.2: irq 17, io base 0x00002080
[ 2.712255] usb usb5: configuration #1 chosen from 1 choice
[ 2.716204] hub 5-0:1.0: USB hub found
[ 2.720203] hub 5-0:1.0: 2 ports detected
[ 2.764228] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.768191] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=
1
[ 2.772191] usb usb5: Product: UHCI Host Controller
[ 2.776191] usb usb5: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 2.780191] usb usb5: SerialNumber: 0000:00:1a.2
[ 2.784214] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ
23
[ 2.792195] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 2.796193] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.800222] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus numbe
r 6
[ 2.804211] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002060
[ 2.808258] usb usb6: configuration #1 chosen from 1 choice
[ 2.812209] hub 6-0:1.0: USB hub found
[ 2.816197] hub 6-0:1.0: 2 ports detected
[ 2.848236] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.852197] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=
1
[ 2.856197] usb usb6: Product: UHCI Host Controller
[ 2.860197] usb usb6: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 2.864197] usb usb6: SerialNumber: 0000:00:1d.0
[ 2.868215] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ
19
[ 2.876200] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 2.880199] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.884225] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus numbe
r 7
[ 2.888218] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002040
[ 2.892263] usb usb7: configuration #1 chosen from 1 choice
[ 2.896214] hub 7-0:1.0: USB hub found
[ 2.900202] hub 7-0:1.0: 2 ports detected
[ 2.928244] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.932202] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=
1
[ 2.936201] usb usb7: Product: UHCI Host Controller
[ 2.940224] usb usb7: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 2.944202] usb usb7: SerialNumber: 0000:00:1d.1
[ 2.948218] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ
18
[ 2.956205] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 2.960204] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.964232] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus numbe
r 8
[ 2.968221] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002020
[ 2.972269] usb usb8: configuration #1 chosen from 1 choice
[ 2.976219] hub 8-0:1.0: USB hub found
[ 2.980207] hub 8-0:1.0: 2 ports detected
[ 3.020245] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.024208] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=
1
[ 3.028207] usb usb8: Product: UHCI Host Controller
[ 3.032207] usb usb8: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 3.036208] usb usb8: SerialNumber: 0000:00:1d.2
[ 2.816794] ata_piix 0000:00:1f.2: version 2.12
[ 2.820206] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 21 (level, low) -> IRQ
21
[ 2.828196] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 2.833827] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 2.840239] scsi0 : ata_piix
[ 2.843486] scsi1 : ata_piix
[ 2.845160] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2430 irq 14
[ 2.848199] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2438 irq 15
[ 2.952224] ata1: SATA link down (SStatus 0 SControl 300)
[ 3.000225] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.008236] ACPI: PCI Interrupt 0000:00:1f.5[A] -> GSI 21 (level, low) -> IRQ
21
[ 3.016208] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 3.021831] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 3.210054] scsi2 : ata_piix
[ 3.212395] scsi3 : ata_piix
[ 3.217245] ata3: SATA max UDMA/133 cmd 0x2448 ctl 0x2464 bmdma 0x2410 irq 21
[ 3.220221] ata4: SATA max UDMA/133 cmd 0x2440 ctl 0x2460 bmdma 0x2418 irq 21
[ 3.296234] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.352246] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.360397] ata4.00: ATA-8: FUJITSU MHY2120BH, 0000000B, max UDMA/100
[ 3.364229] ata4.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.376400] ata4.00: configured for UDMA/100
[ 3.380296] scsi 3:0:0:0: Direct-Access ATA FUJITSU MHY2120B 0000 PQ
: 0 ANSI: 5
[ 3.117022] Driver 'sd' needs updating - please use bus_type methods
[ 3.120267] sd 3:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 3.128682] sd 3:0:0:0: [sda] Write Protect is off
[ 3.132214] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.136365] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, does
n't support DPO or FUA
[ 3.140250] sd 3:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 3.144231] sd 3:0:0:0: [sda] Write Protect is off
[ 3.148215] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.152228] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, does
n't support DPO or FUA
[ 3.156215] sda: sda1 sda2 < sda5 >
[ 3.162695] sd 3:0:0:0: [sda] Attached SCSI disk
[-- Attachment #3: intel_lspci_rob.txt --]
[-- Type: text/plain, Size: 2258 bytes --]
00:00.0 Host bridge [0600]: Intel Corporation 3200/3210 Chipset DRAM Controller [8086:29f0]
00:06.0 PCI bridge [0604]: Intel Corporation 3210 Chipset Host-Secondary PCI Express Bridge [8086:29f9]
00:19.0 Ethernet controller [0200]: Intel Corporation 82566DM-2 Gigabit Network Connection [8086:10bd] (rev 02)
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02)
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02)
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02)
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02)
00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 02)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801IR (ICH9R) LPC Interface Controller [8086:2916] (rev 02)
00:1f.2 IDE interface [0101]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA IDE Controller [8086:2920] (rev 02)
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02)
00:1f.5 IDE interface [0101]: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller [8086:2926] (rev 02)
01:00.0 Mass storage controller [0180]: Device [1a10:0001]
03:00.0 VGA compatible controller [0300]: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) [102b:0522] (rev 02)
04:02.0 Ethernet controller [0200]: Intel Corporation 82541GI Gigabit Ethernet Controller [8086:1076] (rev 05)
[-- Attachment #4: intel_rob_s0.cap --]
[-- Type: application/octet-stream, Size: 42830 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 2.6.25-2-amd64 (Debian 2.6.25-7) (maks@debian.org)
(gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Mon Jul 14 11
:05:23 UTC 2008
[ 0.000000] Command line: root=UUID=5475086d-47aa-426f-80b8-b4d25a7327f1 ro c
onsole=ttyS0,115200 loglevel=8
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfcf0000 (usable)
[ 0.000000] BIOS-e820: 00000000bfcf0000 - 00000000bfd96000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfd96000 - 00000000bfdfd000 (usable)
[ 0.000000] BIOS-e820: 00000000bfdfd000 - 00000000bfe5f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfe5f000 - 00000000bfe6a000 (usable)
[ 0.000000] BIOS-e820: 00000000bfe6a000 - 00000000bfedf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfedf000 - 00000000bfee7000 (usable)
[ 0.000000] BIOS-e820: 00000000bfee7000 - 00000000bfeff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfeff000 - 00000000bff00000 (usable)
[ 0.000000] BIOS-e820: 00000000bff00000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 00000000fff8c000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000240000000 (usable)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 785648) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 785814, 785917) 2 entries of 3200 us
ed
[ 0.000000] Entering add_active_range(0, 786015, 786026) 3 entries of 3200 us
ed
[ 0.000000] Entering add_active_range(0, 786143, 786151) 4 entries of 3200 us
ed
[ 0.000000] Entering add_active_range(0, 786175, 786176) 5 entries of 3200 us
ed
[ 0.000000] Entering add_active_range(0, 1048576, 2359296) 6 entries of 3200
used
[ 0.000000] end_pfn_map = 2359296
[ 0.000000] DMI 2.5 present.
[ 0.000000] ACPI: RSDP 000F03C0, 0024 (r2 INTEL )
[ 0.000000] ACPI: XSDT BFEFE120, 009C (r1 INTEL S3200SHC 0 INTL 1000
013)
[ 0.000000] ACPI: FACP BFEFB000, 00F4 (r3 INTEL S3200SHC 0 MSFT 1000
013)
[ 0.000000] ACPI: DSDT BFEF5000, 568D (r1 INTEL S3200SHC 0 MSFT 1000
013)
[ 0.000000] ACPI: FACS BFE6A000, 0040
[ 0.000000] ACPI: APIC BFEF4000, 0084 (r1 INTEL S3200SHC 0 MSFT 1000
013)
[ 0.000000] ACPI: WDDT BFEF3000, 0040 (r1 INTEL S3200SHC 0 MSFT 1000
013)
[ 0.000000] ACPI: MCFG BFEF2000, 003C (r1 INTEL S3200SHC 0 MSFT 1000
013)
[ 0.000000] ACPI: SPCR BFEF1000, 0050 (r1 INTEL S3200SHC 0 MSFT 1000
013)
[ 0.000000] ACPI: DMAR BFEF0000, 0110 (r1 INTEL S3200SHC 1 MSFT 1000
013)
[ 0.000000] ACPI: SSDT BFEEF000, 0175 (r1 INTEL Cpu0Ist 10 MSFT 1000
013)
[ 0.000000] ACPI: SSDT BFEEE000, 0175 (r1 INTEL Cpu1Ist 10 MSFT 1000
013)
[ 0.000000] ACPI: SSDT BFEED000, 0175 (r1 INTEL Cpu2Ist 10 MSFT 1000
013)
[ 0.000000] ACPI: SSDT BFEEC000, 0175 (r1 INTEL Cpu3Ist 10 MSFT 1000
013)
[ 0.000000] ACPI: SSDT BFEEB000, 01BC (r1 INTEL CpuPm 10 MSFT 1000
013)
[ 0.000000] ACPI: HEST BFEEA000, 00A8 (r1 INTEL S3200SHC 1 INTL
1)
[ 0.000000] ACPI: BERT BFEE9000, 0030 (r1 INTEL S3200SHC 1 INTL
1)
[ 0.000000] ACPI: ERST BFEE8000, 0230 (r1 INTEL S3200SHC 1 INTL
1)
[ 0.000000] ACPI: EINJ BFEE7000, 0130 (r1 INTEL S3200SHC 1 INTL
1)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000240000000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 785648) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 785814, 785917) 2 entries of 3200 us
ed
[ 0.000000] Entering add_active_range(0, 786015, 786026) 3 entries of 3200 us
ed
[ 0.000000] Entering add_active_range(0, 786143, 786151) 4 entries of 3200 us
ed
[ 0.000000] Entering add_active_range(0, 786175, 786176) 5 entries of 3200 us
ed
[ 0.000000] Entering add_active_range(0, 1048576, 2359296) 6 entries of 3200
used
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000240000000
[ 0.000000] NODE_DATA [0000000000012000 - 0000000000018fff]
[ 0.000000] bootmap [0000000000019000 - 0000000000060fff] pages 48
[ 0.000000] early res: 0 [0-fff] BIOS data page
[ 0.000000] early res: 1 [6000-7fff] SMP_TRAMPOLINE
[ 0.000000] early res: 2 [200000-63d2f7] TEXT DATA BSS
[ 0.000000] early res: 3 [378fb000-37fef756] RAMDISK
[ 0.000000] early res: 4 [9fc00-a0bff] EBDA
[ 0.000000] early res: 5 [8000-11fff] PGTABLE
[ 0.000000] [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on no
de 0
[ 0.000000] [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on no
de 0
[ 0.000000] [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on no
de 0
[ 0.000000] [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on no
de 0
[ 0.000000] [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on no
de 0
[ 0.000000] [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on no
de 0
[ 0.000000] [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on no
de 0
[ 0.000000] [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on no
de 0
[ 0.000000] [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on no
de 0
[ 0.000000] [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on no
de 0
[ 0.000000] [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on no
de 0
[ 0.000000] [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on no
de 0
[ 0.000000] [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on no
de 0
[ 0.000000] [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on no
de 0
[ 0.000000] [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on no
de 0
[ 0.000000] [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on no
de 0
[ 0.000000] [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on no
de 0
[ 0.000000] [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on no
de 0
[ 0.000000] [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on no
de 0
[ 0.000000] [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on no
de 0
[ 0.000000] [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on no
de 0
[ 0.000000] [ffffe20003800000-ffffe200039fffff] PMD ->ffff810006600000 on no
de 0
[ 0.000000] [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810006a00000 on no
de 0
[ 0.000000] [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810006e00000 on no
de 0
[ 0.000000] [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810007200000 on no
de 0
[ 0.000000] [ffffe20004000000-ffffe200041fffff] PMD ->ffff810007600000 on no
de 0
[ 0.000000] [ffffe20004200000-ffffe200043fffff] PMD ->ffff810007a00000 on no
de 0
[ 0.000000] [ffffe20004400000-ffffe200045fffff] PMD ->ffff810007e00000 on no
de 0
[ 0.000000] [ffffe20004600000-ffffe200047fffff] PMD ->ffff810008200000 on no
de 0
[ 0.000000] [ffffe20004800000-ffffe200049fffff] PMD ->ffff810008600000 on no
de 0
[ 0.000000] [ffffe20004a00000-ffffe20004bfffff] PMD ->ffff810008a00000 on no
de 0
[ 0.000000] [ffffe20004c00000-ffffe20004dfffff] PMD ->ffff810008e00000 on no
de 0
[ 0.000000] [ffffe20004e00000-ffffe20004ffffff] PMD ->ffff810009200000 on no
de 0
[ 0.000000] [ffffe20005000000-ffffe200051fffff] PMD ->ffff810009600000 on no
de 0
[ 0.000000] [ffffe20005200000-ffffe200053fffff] PMD ->ffff810009a00000 on no
de 0
[ 0.000000] [ffffe20005400000-ffffe200055fffff] PMD ->ffff810009e00000 on no
de 0
[ 0.000000] [ffffe20005600000-ffffe200057fffff] PMD ->ffff81000a200000 on no
de 0
[ 0.000000] [ffffe20005800000-ffffe200059fffff] PMD ->ffff81000a600000 on no
de 0
[ 0.000000] [ffffe20005a00000-ffffe20005bfffff] PMD ->ffff81000aa00000 on no
de 0
[ 0.000000] [ffffe20005c00000-ffffe20005dfffff] PMD ->ffff81000ae00000 on no
de 0
[ 0.000000] [ffffe20005e00000-ffffe20005ffffff] PMD ->ffff81000b200000 on no
de 0
[ 0.000000] [ffffe20006000000-ffffe200061fffff] PMD ->ffff81000b600000 on no
de 0
[ 0.000000] [ffffe20006200000-ffffe200063fffff] PMD ->ffff81000ba00000 on no
de 0
[ 0.000000] [ffffe20006400000-ffffe200065fffff] PMD ->ffff81000be00000 on no
de 0
[ 0.000000] [ffffe20006600000-ffffe200067fffff] PMD ->ffff81000c200000 on no
de 0
[ 0.000000] [ffffe20006800000-ffffe200069fffff] PMD ->ffff81000c600000 on no
de 0
[ 0.000000] [ffffe20006a00000-ffffe20006bfffff] PMD ->ffff81000ca00000 on no
de 0
[ 0.000000] [ffffe20006c00000-ffffe20006dfffff] PMD ->ffff81000ce00000 on no
de 0
[ 0.000000] [ffffe20006e00000-ffffe20006ffffff] PMD ->ffff81000d200000 on no
de 0
[ 0.000000] [ffffe20007000000-ffffe200071fffff] PMD ->ffff81000d600000 on no
de 0
[ 0.000000] [ffffe20007200000-ffffe200073fffff] PMD ->ffff81000da00000 on no
de 0
[ 0.000000] [ffffe20007400000-ffffe200075fffff] PMD ->ffff81000de00000 on no
de 0
[ 0.000000] [ffffe20007600000-ffffe200077fffff] PMD ->ffff81000e200000 on no
de 0
[ 0.000000] [ffffe20007800000-ffffe200079fffff] PMD ->ffff81000e600000 on no
de 0
[ 0.000000] [ffffe20007a00000-ffffe20007bfffff] PMD ->ffff81000ea00000 on no
de 0
[ 0.000000] [ffffe20007c00000-ffffe20007dfffff] PMD ->ffff81000ee00000 on no
de 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 2359296
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[7] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 785648
[ 0.000000] 0: 785814 -> 785917
[ 0.000000] 0: 786015 -> 786026
[ 0.000000] 0: 786143 -> 786151
[ 0.000000] 0: 786175 -> 786176
[ 0.000000] 0: 1048576 -> 2359296
[ 0.000000] On node 0 totalpages: 2096394
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1101 pages reserved
[ 0.000000] DMA zone: 2842 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 767395 pages, LIFO batch:31
[ 0.000000] Normal zone: 17920 pages used for memmap
[ 0.000000] Normal zone: 1292800 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 5, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bfcf0000 - 00000000bfd96000
[ 0.000000] PM: Registered nosave memory: 00000000bfdfd000 - 00000000bfe5f000
[ 0.000000] PM: Registered nosave memory: 00000000bfe6a000 - 00000000bfedf000
[ 0.000000] PM: Registered nosave memory: 00000000bfee7000 - 00000000bfeff000
[ 0.000000] PM: Registered nosave memory: 00000000bff00000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fff80000
[ 0.000000] PM: Registered nosave memory: 00000000fff80000 - 00000000fff8c000
[ 0.000000] PM: Registered nosave memory: 00000000fff8c000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:3000
0000)
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PERCPU: Allocating 35096 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag
es: 2063037
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=UUID=5475086d-47aa-426f-80b8-b4d25a7327
f1 ro console=ttyS0,115200 loglevel=8
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] TSC calibrated against PM_TIMER
[ 0.000002] time.c: Detected 2659.988 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [ttyS0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.004000] Placing software IO TLB between 0xf033000 - 0x13033000
[ 0.004000] Memory: 8192756k/9437184k available (2184k kernel code, 192820k r
eserved, 1012k data, 372k init)
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.084008] Calibrating delay using timer specific routine.. 5324.10 BogoMIPS
(lpj=10648218)
[ 0.092038] Security Framework initialized
[ 0.096010] SELinux: Disabled at boot.
[ 0.100009] Capability LSM initialized
[ 0.104585] Dentry cache hash table entries: 1048576 (order: 11, 8388608 byte
s)
[ 0.114661] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.120231] Mount-cache hash table entries: 256
[ 0.124128] Initializing cgroup subsys ns
[ 0.128013] Initializing cgroup subsys cpuacct
[ 0.132027] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.140010] CPU: L2 cache: 4096K
[ 0.143600] CPU 0/0 -> Node 0
[ 0.144011] CPU: Physical Processor ID: 0
[ 0.148011] CPU: Processor Core ID: 0
[ 0.152017] CPU0: Thermal monitoring enabled (TM2)
[ 0.156011] using mwait in idle threads.
[ 0.160669] ACPI: Core revision 20070126
[ 0.219210] Using local APIC timer interrupts.
[ 0.224015] APIC timer calibration result 20781156
[ 0.228015] Detected 20.781 MHz APIC timer.
[ 0.232129] Booting processor 1/2 APIC 0x1
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 5319.99 BogoMIPS
(lpj=10639989)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU 1/1 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.004000] Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz stepping 0b
[ 0.324530] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.328054] Brought up 2 CPUs
[ 0.332105] CPU0 attaching sched-domain:
[ 0.336039] domain 0: span 00000003
[ 0.340039] groups: 00000001 00000002
[ 0.345126] domain 1: span 00000003
[ 0.349501] groups: 00000003
[ 0.353127] CPU1 attaching sched-domain:
[ 0.356040] domain 0: span 00000003
[ 0.361501] groups: 00000002 00000001
[ 0.366008] domain 1: span 00000003
[ 0.369502] groups: 00000003
[ 0.373330] net_namespace: 1016 bytes
[ 0.376043] Booting paravirtualized kernel on bare hardware
[ 0.380188] NET: Registered protocol family 16
[ 0.384178] ACPI: bus type pci registered
[ 0.401080] PCI: Using MMCONFIG at f0000000 - ffffffff
[ 0.404043] PCI: Using configuration type 1
[ 0.412752] ACPI: EC: Look up EC in DSDT
[ 0.420089] ACPI: Interpreter enabled
[ 0.424044] ACPI: (supports S0 S1 S4 S5)
[ 0.428345] ACPI: Using IOAPIC for interrupt routing
[ 0.437552] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.440650] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.444048] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GP
IO/TCO
[ 0.448047] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 0.452461] PCI: Transparent bridge - 0000:00:1e.0
[ 0.456066] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.460432] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE6._PRT]
[ 0.464162] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 0.468233] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.472168] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.483357] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.486473] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.494268] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.501655] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.509150] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.516752] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.524140] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.530474] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.534688] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.536071] pnp: PnP ACPI init
[ 0.540055] ACPI: bus type pnp registered
[ 0.544770] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.553136] 00:01: calling quirk 0xffffffff8035ba3a: quirk_system_pci_resour
ces+0x0/0x173()
[ 0.560083] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.566186] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.569951] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.577165] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.584089] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.592064] 00:06: calling quirk 0xffffffff8035ba3a: quirk_system_pci_resour
ces+0x0/0x173()
[ 0.600087] pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.608486] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.616448] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.624117] pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active
)
[ 0.632116] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active
)
[ 0.640440] pnp 00:0b: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.648133] pnp 00:0c: Plug and Play ACPI device, IDs PNP0003 (active)
[ 0.653971] pnp: PnP ACPI: found 13 devices
[ 0.656059] ACPI: ACPI bus type pnp unregistered
[ 0.660185] usbcore: registered new interface driver usbfs
[ 0.664097] usbcore: registered new interface driver hub
[ 0.668088] usbcore: registered new device driver usb
[ 0.672152] PCI: Using ACPI for IRQ routing
[ 0.676060] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 0.696068] PCI-GART: No AMD northbridge found.
[ 0.700143] hpet clockevent registered
[ 0.704064] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.709373] hpet0: 4 64-bit timers, 14318180 Hz
[ 0.713084] ACPI: RTC can wake from S4
[ 0.728066] pnp: the driver 'system' has been registered
[ 0.732068] system 00:01: iomem range 0xf0000000-0xf3ffffff could not be rese
rved
[ 0.736064] system 00:01: iomem range 0xfeb00000-0xfeb03fff has been reserved
[ 0.740064] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.744065] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.748065] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.752065] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.756065] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.760065] system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved
[ 0.764066] system 00:01: iomem range 0xc0000-0xdffff could not be reserved
[ 0.768066] system 00:01: iomem range 0xe0000-0xfffff could not be reserved
[ 0.772066] system 00:01: iomem range 0xffc00000-0xffffffff could not be rese
rved
[ 0.776066] system 00:01: driver attached
[ 0.780070] system 00:06: ioport range 0x500-0x53f has been reserved
[ 0.784067] system 00:06: ioport range 0x400-0x47f has been reserved
[ 0.788067] system 00:06: ioport range 0xca0-0xcaf has been reserved
[ 0.792067] system 00:06: ioport range 0x680-0x6ff has been reserved
[ 0.796068] system 00:06: ioport range 0x800-0x87f has been reserved
[ 0.800068] system 00:06: ioport range 0x600-0x61f has been reserved
[ 0.804068] system 00:06: driver attached
[ 0.808338] PCI: Bridge: 0000:00:06.0
[ 0.812068] IO window: disabled.
[ 0.816069] MEM window: disabled.
[ 0.820070] PREFETCH window: 0x00000000c0000000-0x00000000dfffffff
[ 0.824070] PCI: Bridge: 0000:00:1c.0
[ 0.828069] IO window: disabled.
[ 0.832071] MEM window: disabled.
[ 0.836071] PREFETCH window: disabled.
[ 0.840074] PCI: Bridge: 0000:00:1c.4
[ 0.844070] IO window: disabled.
[ 0.848073] MEM window: 0xe1000000-0xe18fffff
[ 0.852072] PREFETCH window: 0x00000000e0000000-0x00000000e0ffffff
[ 0.856074] PCI: Bridge: 0000:00:1e.0
[ 0.860072] IO window: 1000-1fff
[ 0.864074] MEM window: 0xe1900000-0xe19fffff
[ 0.868073] PREFETCH window: disabled.
[ 0.872082] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ
16
[ 0.880074] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 0.884084] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ
17
[ 0.892075] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.896084] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ
17
[ 0.904075] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 0.908080] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.912092] NET: Registered protocol family 2
[ 0.960258] IP route cache hash table entries: 262144 (order: 9, 2097152 byte
s)
[ 0.965115] TCP established hash table entries: 524288 (order: 11, 8388608 by
tes)
[ 0.972687] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.976476] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.980080] TCP reno registered
[ 0.996235] checking if image is initramfs...<7>Switched to high resolution m
ode on CPU 1
[ 1.204094] Switched to high resolution mode on CPU 0
[ 1.219566] it is
[ 1.450339] Freeing initrd memory: 7121k freed
[ 1.289249] audit: initializing netlink socket (disabled)
[ 1.292111] type=2000 audit(1223549318.552:1): initialized
[ 1.296590] Total HugeTLB memory allocated, 0
[ 1.300168] VFS: Disk quotas dquot_6.5.1
[ 1.304129] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.308165] io scheduler noop registered
[ 1.312100] io scheduler anticipatory registered
[ 1.316100] io scheduler deadline registered
[ 1.320107] io scheduler cfq registered (default)
[ 1.324411] pci 0000:03:00.0: Boot video device
[ 1.328163] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 1.332119] assign_interrupt_mode Found MSI capability
[ 1.336118] Allocate Port Service[0000:00:06.0:pcie00]
[ 1.340126] Allocate Port Service[0000:00:06.0:pcie03]
[ 1.344151] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 1.348124] assign_interrupt_mode Found MSI capability
[ 1.352125] Allocate Port Service[0000:00:1c.0:pcie00]
[ 1.356125] Allocate Port Service[0000:00:1c.0:pcie02]
[ 1.360124] Allocate Port Service[0000:00:1c.0:pcie03]
[ 1.364159] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 1.368125] assign_interrupt_mode Found MSI capability
[ 1.372125] Allocate Port Service[0000:00:1c.4:pcie00]
[ 1.376127] Allocate Port Service[0000:00:1c.4:pcie02]
[ 1.380126] Allocate Port Service[0000:00:1c.4:pcie03]
[ 1.389640] Real Time Clock Driver v1.12ac
[ 1.392172] Linux agpgart interface v0.103
[ 1.396105] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 1.400213] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.404204] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.408208] pnp: the driver 'serial' has been registered
[ 1.412259] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.416131] serial 00:07: driver attached
[ 1.420212] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.424131] serial 00:08: driver attached
[ 1.428648] brd: module loaded
[ 1.432149] input: Macintosh mouse button emulation as /class/input/input0
[ 1.436165] pnp: the driver 'i8042 kbd' has been registered
[ 1.440115] i8042 kbd 00:0a: driver attached
[ 1.444125] pnp: the driver 'i8042 aux' has been registered
[ 1.448116] i8042 aux 00:09: driver attached
[ 1.452127] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq
1,12
[ 1.702385] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.704126] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.724172] mice: PS/2 mouse device common for all mice
[ 1.728152] cpuidle: using governor ladder
[ 1.732131] cpuidle: using governor menu
[ 1.736382] TCP cubic registered
[ 1.740133] NET: Registered protocol family 1
[ 1.744137] NET: Registered protocol family 17
[ 1.748198] registered taskstats version 1
[ 1.520908] input: AT Translated Set 2 keyboard as /class/input/input1
[ 1.752244] Freeing unused kernel memory: 372k freed
Loading, please wait...
Couldnt get a file descriptor referring to the console
Couldnt get a file descriptor referring to the console
Couldnt get a file descriptor referring to the console
Begin: Loading essential drivers ...
Do[ 1.815795] ACPI: ACPI0007:00 is registered as cooling_device0
ne.
Begin: Runn[ 1.816234] ACPI: ACPI0007:01 is registered as cooling_device1
ing /scripts/init-premount ...
[ 1.991798] e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0
[ 1.992157] e1000e: Copyright (c) 1999-2007 Intel Corporation.
[ 1.996185] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ
20
[ 2.004150] PCI: Setting latency timer of device 0000:00:19.0 to 64
[ 1.796744] USB Universal Host Controller Interface driver v3.0
[ 2.046018] Uniform Multi-Platform E-IDE driver
[ 2.048149] ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
[ 1.852468] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
[ 1.856148] Copyright (c) 1999-2006 Intel Corporation.
[ 2.125987] FDC 0 is a National Semiconductor PC87306
[ 2.142388] eth0: (PCI Express:2.5GB/s:Width x1) 00:15:17:27:67:bc
[ 2.144152] eth0: Intel(R) PRO/1000 Network Connection
[ 2.148172] eth0: MAC: 5, PHY: 6, PBA No: 0070ff-0ff
[ 2.152250] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 17 (level, low) -> IRQ
17
[ 2.160161] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 2.164154] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.168253] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus numbe
r 1
[ 2.178037] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.180157] PCI: cache line size of 32 is not supported by device 0000:00:1a.
7
[ 2.184161] ehci_hcd 0000:00:1a.7: irq 17, io mem 0xe1a21400
[ 1.996934] No dock devices found.
[ 2.004218] SCSI subsystem initialized
[ 2.208160] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 2.212233] usb usb1: configuration #1 chosen from 1 choice
[ 2.216176] hub 1-0:1.0: USB hub found
[ 2.220161] hub 1-0:1.0: 6 ports detected
[ 2.036309] libata version 3.00 loaded.
[ 2.268208] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.272161] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=
1
[ 2.276160] usb usb1: Product: EHCI Host Controller
[ 2.280160] usb usb1: Manufacturer: Linux 2.6.25-2-amd64 ehci_hcd
[ 2.284160] usb usb1: SerialNumber: 0000:00:1a.7
[ 2.288214] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ
23
[ 2.296168] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 2.300162] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.304192] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus numbe
r 2
[ 2.314591] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.316165] PCI: cache line size of 32 is not supported by device 0000:00:1d.
7
[ 2.320169] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe1a21000
[ 2.336167] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 2.340219] usb usb2: configuration #1 chosen from 1 choice
[ 2.344180] hub 2-0:1.0: USB hub found
[ 2.348167] hub 2-0:1.0: 6 ports detected
[ 2.364201] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.368166] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=
1
[ 2.372166] usb usb2: Product: EHCI Host Controller
[ 2.376166] usb usb2: Manufacturer: Linux 2.6.25-2-amd64 ehci_hcd
[ 2.380166] usb usb2: SerialNumber: 0000:00:1d.7
[ 2.228753] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 18 (level, low) -> IRQ
18
[ 2.236161] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 2.240158] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.244190] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus numbe
r 3
[ 2.248179] uhci_hcd 0000:00:1a.0: irq 18, io base 0x000020c0
[ 2.252228] usb usb3: configuration #1 chosen from 1 choice
[ 2.256174] hub 3-0:1.0: USB hub found
[ 2.260162] hub 3-0:1.0: 2 ports detected
[ 2.280198] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.284161] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=
1
[ 2.288161] usb usb3: Product: UHCI Host Controller
[ 2.292161] usb usb3: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 2.296161] usb usb3: SerialNumber: 0000:00:1a.0
[ 2.300180] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ
21
[ 2.308164] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 2.312163] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.316192] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus numbe
r 4
[ 2.320181] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000020a0
[ 2.324228] usb usb4: configuration #1 chosen from 1 choice
[ 2.328178] hub 4-0:1.0: USB hub found
[ 2.332166] hub 4-0:1.0: 2 ports detected
[ 2.364205] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.368166] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=
1
[ 2.372166] usb usb4: Product: UHCI Host Controller
[ 2.376166] usb usb4: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 2.380166] usb usb4: SerialNumber: 0000:00:1a.1
[ 2.384184] ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 17 (level, low) -> IRQ
17
[ 2.392170] PCI: Setting latency timer of device 0000:00:1a.2 to 64
[ 2.396168] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 2.400205] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus numbe
r 5
[ 2.404185] uhci_hcd 0000:00:1a.2: irq 17, io base 0x00002080
[ 2.408238] usb usb5: configuration #1 chosen from 1 choice
[ 2.412184] hub 5-0:1.0: USB hub found
[ 2.416171] hub 5-0:1.0: 2 ports detected
[ 2.444210] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.448172] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=
1
[ 2.452171] usb usb5: Product: UHCI Host Controller
[ 2.456171] usb usb5: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 2.460171] usb usb5: SerialNumber: 0000:00:1a.2
[ 2.464195] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ
23
[ 2.472175] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 2.476173] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.480199] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus numbe
r 6
[ 2.484189] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002060
[ 2.488237] usb usb6: configuration #1 chosen from 1 choice
[ 2.492188] hub 6-0:1.0: USB hub found
[ 2.496177] hub 6-0:1.0: 2 ports detected
[ 2.528214] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.532176] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=
1
[ 2.536176] usb usb6: Product: UHCI Host Controller
[ 2.540176] usb usb6: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 2.544176] usb usb6: SerialNumber: 0000:00:1d.0
[ 2.548194] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ
19
[ 2.556180] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 2.560178] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.564207] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus numbe
r 7
[ 2.568198] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002040
[ 2.572243] usb usb7: configuration #1 chosen from 1 choice
[ 2.576196] hub 7-0:1.0: USB hub found
[ 2.580182] hub 7-0:1.0: 2 ports detected
[ 2.616218] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.620182] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=
1
[ 2.624182] usb usb7: Product: UHCI Host Controller
[ 2.628182] usb usb7: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 2.632182] usb usb7: SerialNumber: 0000:00:1d.1
[ 2.636199] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ
18
[ 2.644185] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 2.648184] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.652213] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus numbe
r 8
[ 2.656200] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002020
[ 2.660249] usb usb8: configuration #1 chosen from 1 choice
[ 2.664199] hub 8-0:1.0: USB hub found
[ 2.668187] hub 8-0:1.0: 2 ports detected
[ 2.696225] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.700187] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=
1
[ 2.704187] usb usb8: Product: UHCI Host Controller
[ 2.708187] usb usb8: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 2.712187] usb usb8: SerialNumber: 0000:00:1d.2
[ 3.013324] ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 18 (level, low) -> IRQ
18
[ 3.088430] e1000: 0000:04:02.0: e1000_probe: (PCI:33MHz:32-bit) 00:15:17:27:
67:ba
[ 3.138315] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 3.140248] ata_piix 0000:00:1f.2: version 2.12
[ 3.144229] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 21 (level, low) -> IRQ
21
[ 3.151227] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 3.156938] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 3.164236] scsi0 : ata_piix
[ 3.167667] scsi1 : ata_piix
[ 3.169254] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2430 irq 14
[ 3.172219] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2438 irq 15
[ 2.932243] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.940370] ata1.00: ATA-8: FUJITSU MHY2120BH, 0000000B, max UDMA/100
[ 2.944202] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.956374] ata1.00: configured for UDMA/100
[ 3.020227] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.240997] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHY2120B 0000 PQ
: 0 ANSI: 5
[ 3.244274] ACPI: PCI Interrupt 0000:00:1f.5[A] -> GSI 21 (level, low) -> IRQ
21
[ 3.252222] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 3.257841] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 3.260655] scsi2 : ata_piix
[ 3.264456] scsi3 : ata_piix
[ 3.269139] ata3: SATA max UDMA/133 cmd 0x2448 ctl 0x2464 bmdma 0x2410 irq 21
[ 3.272226] ata4: SATA max UDMA/133 cmd 0x2440 ctl 0x2460 bmdma 0x2418 irq 21
[ 3.128223] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.176226] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.377294] Driver 'sd' needs updating - please use bus_type methods
[ 3.380291] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 3.384245] sd 0:0:0:0: [sda] Write Protect is off
[ 3.388243] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.392265] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, does
n't support DPO or FUA
[ 3.396283] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 3.401289] sd 0:0:0:0: [sda] Write Protect is off
[ 3.404232] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.408260] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, does
n't support DPO or FUA
[ 3.412235] sda: sda1 sda2 < sda5 >
[ 3.418720] sd 0:0:0:0: [sda] Attached SCSI disk
Done.
Begin: Mounting root file system ...
Begin: Running /scripts/lo[ 3.419826] PM: Starting manual resume from disk
cal-top ...
Done.
Begin: Running /scripts/local-premount ...
kinit: name_to_dev_t(/dev/sda5) = sda5(8,5)
kinit: trying to resume from /dev/sda5
kinit: No resume image, doing normal boot...
resume: libgcrypt version: 1.4.1
Done.
[ 3.585723] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 3.588243] EXT3-fs: write access will be enabled during recovery.
[ 3.640245] kjournald starting. Commit interval 5 seconds
[ 3.640257] EXT3-fs: recovery complete.
[ 3.503828] EXT3-fs: mounted filesystem with ordered data mode.
Begin: Running /scripts/local-bottom ...
Done.
Done.
Begin: Running /scripts/init-bottom ...
Done.
INIT: version 2.86 booting
Starting the hotplug events dispatcher: udevd[ 4.407987] udevd version 124 st
arted
.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...[ 4.768483] input: Power Button (FF)
as /class/input/input2
[ 4.796331] ACPI: Power Button (FF) [PWRF]
[ 4.997476] input: Sleep Button (CM) as /class/input/input3
[ 5.032356] ACPI: Sleep Button (CM) [SLPB]
[ 5.036382] input: Power Button (CM) as /class/input/input4
[ 5.064362] ACPI: Power Button (CM) [PWRB]
[ 5.157872] input: PC Speaker as /class/input/input5
[ 5.455158] pnp: the driver 'rtc_cmos' has been registered
[ 5.456371] rtc_cmos 00:03: disabling not supported
[ 5.460364] rtc_cmos: probe of 00:03 failed with error -16
[ 5.273104] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 18 (level, low) -> IRQ
18
[ 5.493767] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 5.496416] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hard
ware
[ 5.500370] iTCO_wdt: No card detected
done.
Setting parameters of disc: (none).
Setting the system clock.
Activating swap...[ 5.820382] Adding 4803392k swap on /dev/sda5. Priority:-1
extents:1 across:4803392k
done.
Checking root file system...fsck 1.41.0 (10-Jul-2008)
/dev/sda1: clean, 100271/7028736 files, 1750854/[ 6.219354] EXT3 FS on sda1,
internal journal
28103701 blocks
done.
Setting the system clock.
Cleaning up ifupdown....
Loading kernel modules...[ 6.752440] loop: module loaded
done.
Checking file systems...fsck 1.41.0 (10-Jul-2008)
done.
Setting kernel variables (/etc/sysctl.conf)...done.
Mounting local filesystems...done.
Activating swapfile swap...done.
Setting up networking....
Configuring network interfaces...done.
Starting portmap daemon....
Starting NFS common utilities: statd[ 7.421324] NET: Registered protocol fami
ly 10
[ 7.424796] lo: Disabled Privacy Extensions
[ 7.428802] ADDRCONF(NETDEV_UP): eth0: link is not ready
.
Setting console screen modes and fonts.
Setting up ALSA...done (none loaded).
[ 8.052919] eth0: Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 8.056523] eth0: 10/100 speed: disabling TSO
[ 8.061412] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Recovering schroot sessions:.
INIT: Entering runlevel: 2
Starting system log daemon....
Starting kernel log daemon....
Loading ACPI modules....
Starting ACPI services....
Starting system message bus: dbus.
Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon.
Starting OpenBSD Secure Shell server: sshd.
Setting NIS domainname to: uk.
Starting NIS services: ypbind[ 9.832635] eth0: no IPv6 routers present
binding to YP server........... done] done.
.
Starting automounter: loading autofs4 kernel module, done.
Starting ClamAV virus database updater: freshclam.
Starting MTA: exim4.
Starting NFS common utilities: statd.
[ 12.476450] RPC: Registered udp transport module.
[ 12.476802] RPC: Registered tcp transport module.
[ 13.284851] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Exporting directories for NFS kernel daemon....
Starting NFS kernel daemon: nfsd[ 12.626399] NFSD: Using /var/lib/nfs/v4recove
ry as the NFSv4 state recovery directory
[ 12.649995] NFSD: starting 90-second grace period
mountd.
Starting internet superserver: inetd.
Starting Samba daemons: nmbd smbd.
Setting up X font server socket directory /tmp/.font-unix...done.
Starting X font server: xfs.
Starting file alteration monitor: FAM.
Starting NTP server: ntpd.
[ 14.188908] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
Starting Hardware abstraction layer: hald.
Starting deferred execution scheduler: atd.
Starting periodic command scheduler: crond.
^ permalink raw reply [flat|nested] 5+ messages in thread