* TV @nywhere Plus
@ 2008-11-06 22:32 rs_v4l
2008-11-06 23:31 ` hermann pitton
0 siblings, 1 reply; 2+ messages in thread
From: rs_v4l @ 2008-11-06 22:32 UTC (permalink / raw)
To: video4linux-list
Hi.
I would appreciate if anybody can tell me how do I get remote control
working for "MSI TV @nywhere Plus" TV-card
http://global.msi.com.tw/index.php?func=proddesc&maincat_no=132&prod_no=616
The card is supported by saa7134 and the tuner itself is (as far as I
can tell) is TDA827X
lspci -v -n says
02:08.0 0480: 1131:7133 (rev d1)
Subsystem: 1462:6231
....
I run self-configured and compiled vanilla kernel 2.6.27 .
I was not able to find out whether the remote is supported by Linux.
Neither dmesg output nor boot messages talk about anything related to
remote control.
I also don't recognize whether any entries in /dev or /sys have
something to do with it.
Googling yields some old patches that worked for some people and did
not work for others - but they definitely can't be applied to current
source code.
So is there any chance? What should I be looking for?
--
Thanks
rastos
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: TV @nywhere Plus
2008-11-06 22:32 TV @nywhere Plus rs_v4l
@ 2008-11-06 23:31 ` hermann pitton
0 siblings, 0 replies; 2+ messages in thread
From: hermann pitton @ 2008-11-06 23:31 UTC (permalink / raw)
To: rs_v4l; +Cc: video4linux-list
Hi rastos,
Am Donnerstag, den 06.11.2008, 23:32 +0100 schrieb rs_v4l@rastos.org:
> Hi.
>
> I would appreciate if anybody can tell me how do I get remote control
> working for "MSI TV @nywhere Plus" TV-card
>
> http://global.msi.com.tw/index.php?func=proddesc&maincat_no=132∏_no=616
>
>
> The card is supported by saa7134 and the tuner itself is (as far as I
> can tell) is TDA827X
> lspci -v -n says
> 02:08.0 0480: 1131:7133 (rev d1)
> Subsystem: 1462:6231
> ....
>
> I run self-configured and compiled vanilla kernel 2.6.27 .
> I was not able to find out whether the remote is supported by Linux.
> Neither dmesg output nor boot messages talk about anything related to
> remote control.
> I also don't recognize whether any entries in /dev or /sys have
> something to do with it.
>
> Googling yields some old patches that worked for some people and did
> not work for others - but they definitely can't be applied to current
> source code.
>
> So is there any chance? What should I be looking for?
> --
the patches are only applied at 2.6.28 or you need to install the
current mercurial v4l-dvb at linuxtv.org on older kernels.
Cheers,
Hermann
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2008-11-06 23:34 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-11-06 22:32 TV @nywhere Plus rs_v4l
2008-11-06 23:31 ` hermann pitton
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.