From: Eric Sandeen <sandeen@sandeen.net>
To: xfs-oss <xfs@oss.sgi.com>
Subject: [PATCH] xfsprogs parallel build
Date: Fri, 07 Nov 2008 12:58:35 -0600 [thread overview]
Message-ID: <49148FDB.30407@sandeen.net> (raw)
I got tired of waiting for xfsprogs to build
serially...
On a 16p altix, make -j16 (excluding the configure
phase) went from 2m16s to 33s.
I tossed this into an rpm and did a fedora scratch
build on all arches, they all passed - some of them,
at least, should have been doing parallel builds too.
So this has had reasonable testing.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
---
Index: xfsprogs-2.10.1/Makefile
===================================================================
--- xfsprogs-2.10.1.orig/Makefile
+++ xfsprogs-2.10.1/Makefile
@@ -15,23 +15,28 @@ LSRCFILES = configure configure.in Makep
LDIRT = config.log .dep config.status config.cache confdefs.h conftest* \
Logs/* built .census install.* install-dev.* *.gz
-SUBDIRS = include libxfs libxlog libxcmd libhandle libdisk \
- copy db fsck growfs io logprint mkfs quota mdrestore repair rtcp \
+LIB_SUBDIRS = include libxfs libxlog libxcmd libhandle libdisk
+TOOL_SUBDIRS = copy db fsck growfs io logprint mkfs quota mdrestore repair rtcp \
m4 man doc po debian build
+SUBDIRS = $(LIB_SUBDIRS) $(TOOL_SUBDIRS)
+
default: $(CONFIGURE)
ifeq ($(HAVE_BUILDDEFS), no)
$(MAKE) -C . $@
else
- $(SUBDIRS_MAKERULE)
+ $(MAKE) $(SUBDIRS)
endif
+$(TOOL_SUBDIRS) : $(LIB_SUBDIRS)
+
ifeq ($(HAVE_BUILDDEFS), yes)
include $(BUILDRULES)
else
clean: # if configure hasn't run, nothing to clean
endif
+.NOTPARALLEL: $(CONFIGURE)
$(CONFIGURE):
autoconf
./configure \
@@ -51,13 +56,17 @@ $(CONFIGURE):
aclocal.m4::
aclocal --acdir=`pwd`/m4 --output=$@
-install: default
- $(SUBDIRS_MAKERULE)
+install: default $(addsuffix -install,$(SUBDIRS))
$(INSTALL) -m 755 -d $(PKG_DOC_DIR)
$(INSTALL) -m 644 README $(PKG_DOC_DIR)
-install-dev: default
- $(SUBDIRS_MAKERULE)
+%-install:
+ $(MAKE) -C $* install
+
+install-dev: default $(addsuffix -install-dev,$(SUBDIRS))
+
+%-install-dev:
+ $(MAKE) -C $* install-dev
realclean distclean: clean
rm -f $(LDIRT) $(CONFIGURE)
Index: xfsprogs-2.10.1/include/buildrules
===================================================================
--- xfsprogs-2.10.1.orig/include/buildrules
+++ xfsprogs-2.10.1/include/buildrules
@@ -6,18 +6,22 @@ _BUILDRULES_INCLUDED_ = 1
include $(TOPDIR)/include/builddefs
-clean clobber : $(SUBDIRS)
+clean clobber: $(addsuffix -clean,$(SUBDIRS))
rm -f $(DIRT)
@rm -fr .libs
- $(SUBDIRS_MAKERULE)
+%-clean::
+ $(MAKE) -C $* clean
# Never blow away subdirs
ifdef SUBDIRS
.PRECIOUS: $(SUBDIRS)
-$(SUBDIRS):
- $(SUBDIRS_MAKERULE)
endif
+.PHONY: $(SUBDIRS)
+
+$(SUBDIRS):
+ $(MAKE) -C $@
+
#
# Standard targets
#
@@ -69,11 +73,13 @@ ifdef LTLIBRARY
DEPENDSCRIPT := $(DEPENDSCRIPT) | $(SED) -e 's,^\([^:]*\)\.o,\1.lo,'
endif
-depend : $(CFILES) $(HFILES)
- $(SUBDIRS_MAKERULE)
+depend : $(CFILES) $(HFILES) $(addsuffix -depend,$(SUBDIRS))
$(DEPENDSCRIPT) > .dep
test -s .dep || rm -f .dep
+%-depend:
+ $(MAKE) -C $* depend
+
# Include dep, but only if it exists
ifeq ($(shell test -f .dep && echo .dep), .dep)
include .dep
Index: xfsprogs-2.10.1/include/buildmacros
===================================================================
--- xfsprogs-2.10.1.orig/include/buildmacros
+++ xfsprogs-2.10.1/include/buildmacros
@@ -123,14 +123,6 @@ INSTALL_LINGUAS = \
done
endif
-SUBDIRS_MAKERULE = \
- @for d in $(SUBDIRS) ""; do \
- if test -d "$$d" -a ! -z "$$d"; then \
- $(ECHO) === $$d ===; \
- $(MAKEF) -C $$d $@ || exit $$?; \
- fi; \
- done
-
MAN_MAKERULE = \
@for f in *.[12345678] ""; do \
if test ! -z "$$f"; then \
Index: xfsprogs-2.10.1/man/Makefile
===================================================================
--- xfsprogs-2.10.1.orig/man/Makefile
+++ xfsprogs-2.10.1/man/Makefile
@@ -7,7 +7,16 @@ include $(TOPDIR)/include/builddefs
SUBDIRS = man3 man5 man8
-default install install-dev : $(SUBDIRS)
- $(SUBDIRS_MAKERULE)
+default : $(SUBDIRS)
+
+install : $(addsuffix -install,$(SUBDIRS))
+
+install-dev : $(addsuffix -install-dev,$(SUBDIRS))
+
+%-install:
+ $(MAKE) -C $* install
+
+%-install-dev:
+ $(MAKE) -C $* install-dev
include $(BUILDRULES)
next reply other threads:[~2008-11-07 19:00 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-07 18:58 Eric Sandeen [this message]
2008-11-07 19:27 ` [PATCH V2] xfsprogs parallel build Eric Sandeen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49148FDB.30407@sandeen.net \
--to=sandeen@sandeen.net \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.