All of lore.kernel.org
 help / color / mirror / Atom feed
From: Eric Sandeen <sandeen@sandeen.net>
To: xfs-oss <xfs@oss.sgi.com>
Subject: [PATCH V2] xfsprogs parallel build
Date: Fri, 07 Nov 2008 13:27:28 -0600	[thread overview]
Message-ID: <491496A0.2010409@sandeen.net> (raw)
In-Reply-To: <49148FDB.30407@sandeen.net>

(oops, cvs version...)

I got tired of waiting for xfsprogs to build
serially...

On a 16p altix, make -j16 (excluding the configure
phase) went from 2m16s to 33s.

I tossed this into an rpm and did a fedora scratch
build on all arches, they all passed - some of them,
at least, should have been doing parallel builds too.

So this has had reasonable testing.

Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
---

Index: xfs-cmds/xfsprogs/Makefile
===================================================================
--- xfs-cmds.orig/xfsprogs/Makefile
+++ xfs-cmds/xfsprogs/Makefile
@@ -15,23 +15,28 @@ LSRCFILES = configure configure.in Makep
 LDIRT = config.log .dep config.status config.cache confdefs.h conftest* \
 	Logs/* built .census install.* install-dev.* *.gz
 
-SUBDIRS = include libxfs libxlog libxcmd libhandle libdisk \
-	copy db estimate fsck growfs io logprint mkfs quota mdrestore repair rtcp \
-	m4 man doc po debian build
+LIB_SUBDIRS = include libxfs libxlog libxcmd libhandle libdisk
+TOOL_SUBDIRS = copy db estimate fsck growfs io logprint mkfs quota \
+		mdrestore repair rtcp m4 man doc po debian build
+
+SUBDIRS = $(LIB_SUBDIRS) $(TOOL_SUBDIRS)
 
 default: $(CONFIGURE)
 ifeq ($(HAVE_BUILDDEFS), no)
 	$(MAKE) -C . $@
 else
-	$(SUBDIRS_MAKERULE)
+	$(MAKE) $(SUBDIRS)
 endif
 
+$(TOOL_SUBDIRS) : $(LIB_SUBDIRS)
+
 ifeq ($(HAVE_BUILDDEFS), yes)
 include $(BUILDRULES)
 else
 clean:	# if configure hasn't run, nothing to clean
 endif
 
+.NOTPARALLEL: $(CONFIGURE)
 $(CONFIGURE):
 	autoconf
 	./configure \
@@ -51,16 +56,23 @@ $(CONFIGURE):
 aclocal.m4::
 	aclocal --acdir=`pwd`/m4 --output=$@
 
-install: default
-	$(SUBDIRS_MAKERULE)
+install: default $(addsuffix -install,$(SUBDIRS))
 	$(INSTALL) -m 755 -d $(PKG_DOC_DIR)
 	$(INSTALL) -m 644 README $(PKG_DOC_DIR)
 
-install-dev: default
-	$(SUBDIRS_MAKERULE)
+%-install:
+	$(MAKE) -C $* install
+
+install-dev: default $(addsuffix -install-dev,$(SUBDIRS))
+
+%-install-dev:
+	$(MAKE) -C $* install-dev
+
+install-qa: install $(addsuffix -install-qa,$(SUBDIRS))
+
+%-install-qa:
+	$(MAKE) -C $* install-qa
 
-install-qa: install
-	$(SUBDIRS_MAKERULE)
 
 realclean distclean: clean
 	rm -f $(LDIRT) $(CONFIGURE)
Index: xfs-cmds/xfsprogs/include/buildrules
===================================================================
--- xfs-cmds.orig/xfsprogs/include/buildrules
+++ xfs-cmds/xfsprogs/include/buildrules
@@ -6,18 +6,22 @@ _BUILDRULES_INCLUDED_ = 1
 
 include $(TOPDIR)/include/builddefs
 
-clean clobber : $(SUBDIRS)
+clean clobber: $(addsuffix -clean,$(SUBDIRS))
 	rm -f $(DIRT)
 	@rm -fr .libs
-	$(SUBDIRS_MAKERULE)
+%-clean::
+	$(MAKE) -C $* clean
 
 # Never blow away subdirs
 ifdef SUBDIRS
 .PRECIOUS: $(SUBDIRS)
-$(SUBDIRS):
-	$(SUBDIRS_MAKERULE)
 endif
 
+.PHONY: $(SUBDIRS)
+
+$(SUBDIRS):
+	$(MAKE) -C $@
+
 #
 # Standard targets
 #
@@ -69,11 +73,13 @@ ifdef LTLIBRARY
 DEPENDSCRIPT := $(DEPENDSCRIPT) | $(SED) -e 's,^\([^:]*\)\.o,\1.lo,'
 endif
 
-depend : $(CFILES) $(HFILES)
-	$(SUBDIRS_MAKERULE)
+depend : $(CFILES) $(HFILES) $(addsuffix -depend,$(SUBDIRS))
 	$(DEPENDSCRIPT) > .dep
 	test -s .dep || rm -f .dep
 
+%-depend:
+	$(MAKE) -C $* depend
+
 # Include dep, but only if it exists
 ifeq ($(shell test -f .dep && echo .dep), .dep)
 include .dep
Index: xfs-cmds/xfsprogs/include/buildmacros
===================================================================
--- xfs-cmds.orig/xfsprogs/include/buildmacros
+++ xfs-cmds/xfsprogs/include/buildmacros
@@ -123,14 +123,6 @@ INSTALL_LINGUAS = \
 	done
 endif
 
-SUBDIRS_MAKERULE = \
-	@for d in $(SUBDIRS) ""; do \
-		if test -d "$$d" -a ! -z "$$d"; then \
-			$(ECHO) === $$d ===; \
-			$(MAKEF) -C $$d $@ || exit $$?; \
-		fi; \
-	done
-
 MAN_MAKERULE = \
 	@for f in *.[12345678] ""; do \
 		if test ! -z "$$f"; then \
Index: xfs-cmds/xfsprogs/man/Makefile
===================================================================
--- xfs-cmds.orig/xfsprogs/man/Makefile
+++ xfs-cmds/xfsprogs/man/Makefile
@@ -7,7 +7,16 @@ include $(TOPDIR)/include/builddefs
 
 SUBDIRS = man3 man5 man8
 
-default install install-dev : $(SUBDIRS)
-	$(SUBDIRS_MAKERULE)
+default : $(SUBDIRS)
+
+install : $(addsuffix -install,$(SUBDIRS))
+
+install-dev : $(addsuffix -install-dev,$(SUBDIRS))
+
+%-install:
+	$(MAKE) -C $* install
+
+%-install-dev:
+	$(MAKE) -C $* install-dev
 
 include $(BUILDRULES)

      reply	other threads:[~2008-11-07 20:32 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-11-07 18:58 [PATCH] xfsprogs parallel build Eric Sandeen
2008-11-07 19:27 ` Eric Sandeen [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=491496A0.2010409@sandeen.net \
    --to=sandeen@sandeen.net \
    --cc=xfs@oss.sgi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.