All of lore.kernel.org
 help / color / mirror / Atom feed
From: Helmut Auer <vdr@helmutauer.de>
To: linux-dvb@linuxtv.org
Subject: [linux-dvb] tbs 8920 / cx24116 not working
Date: Fri, 07 Nov 2008 23:43:14 +0100	[thread overview]
Message-ID: <4914C482.8010306@helmutauer.de> (raw)

Hello List,

I just tried to get my tbs 8920 running with current S2API and VDR and 
also with the multiproto drivers and a patch for this card.
Both versions are failing, with this error:

Nov  7 23:39:26 [kernel] LNB Voltage SEC_VOLTAGE_18
Nov  7 23:39:26 [vdr] [23138] ERROR (dvbdevice.c,282): Die Operation 
wird nicht unterstützt
Nov  7 23:39:35 [vdr] [23138] frontend 0 timed out while tuning to 
channel 3, tp 112187
Nov  7 23:39:35 [vdr] [23138] ERROR (dvbdevice.c,282): Die Operation 
wird nicht unterstützt
Nov  7 23:39:35 [kernel] LNB Voltage SEC_VOLTAGE_18
Nov  7 23:39:44 [vdr] [23138] ERROR (dvbdevice.c,282): Die Operation 
wird nicht unterstützt
Nov  7 23:39:44 [kernel] LNB Voltage SEC_VOLTAGE_18

dmesg shows:

LNB Voltage SEC_VOLTAGE_off
ACPI: PCI interrupt for device 0000:01:09.0 disabled
cx88/2: unregistering cx8802 driver, type: dvb access: shared
cx88[0]/2: subsystem: 8920:8888, board: TBS 8920 DVB-S/S2 [card=71]
ACPI: PCI interrupt for device 0000:01:09.2 disabled
Linux video capture interface: v2.00
cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [LNKC] -> GSI 11 (level, 
low) -> IRQ 11
cx88[0]: subsystem: 8920:8888, board: TBS 8920 DVB-S/S2 
[card=72,autodetected], frontend(s): 1
cx88[0]: TV tuner type 4, Radio tuner type -1
cx88[0]/0: found at 0000:01:09.0, rev: 5, irq: 11, latency: 165, mmio: 
0xfc000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
cx88[0]/2: cx2388x 8802 Driver Manager
ACPI: PCI Interrupt 0000:01:09.2[A] -> Link [LNKC] -> GSI 11 (level, 
low) -> IRQ 11
cx88[0]/2: found at 0000:01:09.2, rev: 5, irq: 11, latency: 64, mmio: 
0xfd000000
cx8802_probe() allocating 1 frontend(s)
cx88/2: cx2388x dvb driver version 0.0.6 loaded
cx88/2: registering cx8802 driver, type: dvb access: shared
cx88[0]/2: subsystem: 8920:8888, board: TBS 8920 DVB-S/S2 [card=72]
cx88[0]/2: cx2388x based DVB/ATSC card
DVB: registering new adapter (cx88[0])
DVB: registering adapter 0 frontend 0 (Conexant CX24116/CX24118)...
cx24116_firmware_ondemand: Waiting for firmware upload 
(dvb-fe-cx24116.fw)...
cx24116_firmware_ondemand: Waiting for firmware upload(2)...
cx24116_load_firmware: FW version 1.22.82.0
cx24116_firmware_ondemand: Firmware upload complete
LNB Voltage SEC_VOLTAGE_13
LNB Voltage SEC_VOLTAGE_18

I also tested this patch:
http://hg.kewl.org/v4l-dvb/raw-rev/8d6d8974b33d

but without any change.

Any hints whats going wrong here ?

-- 
Helmut Auer, helmut@helmutauer.de 


_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

             reply	other threads:[~2008-11-07 22:43 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-11-07 22:43 Helmut Auer [this message]
2008-11-07 22:44 ` [linux-dvb] tbs 8920 / cx24116 not working Helmut Auer
2008-11-08 16:32   ` Helmut Auer
2008-11-08 17:57     ` Igor M. Liplianin
2008-11-07 22:48 ` Goga777
2008-11-08  0:17 ` Igor M. Liplianin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4914C482.8010306@helmutauer.de \
    --to=vdr@helmutauer.de \
    --cc=linux-dvb@linuxtv.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.