* Re: [linux-dvb] tbs 8920 / cx24116 not working
2008-11-07 22:43 [linux-dvb] tbs 8920 / cx24116 not working Helmut Auer
@ 2008-11-07 22:44 ` Helmut Auer
2008-11-08 16:32 ` Helmut Auer
2008-11-07 22:48 ` Goga777
2008-11-08 0:17 ` Igor M. Liplianin
2 siblings, 1 reply; 6+ messages in thread
From: Helmut Auer @ 2008-11-07 22:44 UTC (permalink / raw)
To: linux-dvb
> Hello List,
>
> I just tried to get my tbs 8920 running with current S2API and VDR and
> also with the multiproto drivers and a patch for this card.
> Both versions are failing, with this error:
>
> Nov 7 23:39:26 [kernel] LNB Voltage SEC_VOLTAGE_18
> Nov 7 23:39:26 [vdr] [23138] ERROR (dvbdevice.c,282): Die Operation
> wird nicht unterstützt
> Nov 7 23:39:35 [vdr] [23138] frontend 0 timed out while tuning to
> channel 3, tp 112187
> Nov 7 23:39:35 [vdr] [23138] ERROR (dvbdevice.c,282): Die Operation
> wird nicht unterstützt
> Nov 7 23:39:35 [kernel] LNB Voltage SEC_VOLTAGE_18
> Nov 7 23:39:44 [vdr] [23138] ERROR (dvbdevice.c,282): Die Operation
> wird nicht unterstützt
> Nov 7 23:39:44 [kernel] LNB Voltage SEC_VOLTAGE_18
>
> dmesg shows:
>
> LNB Voltage SEC_VOLTAGE_off
> ACPI: PCI interrupt for device 0000:01:09.0 disabled
> cx88/2: unregistering cx8802 driver, type: dvb access: shared
> cx88[0]/2: subsystem: 8920:8888, board: TBS 8920 DVB-S/S2 [card=71]
> ACPI: PCI interrupt for device 0000:01:09.2 disabled
> Linux video capture interface: v2.00
> cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
> ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [LNKC] -> GSI 11 (level,
> low) -> IRQ 11
> cx88[0]: subsystem: 8920:8888, board: TBS 8920 DVB-S/S2
> [card=72,autodetected], frontend(s): 1
> cx88[0]: TV tuner type 4, Radio tuner type -1
> cx88[0]/0: found at 0000:01:09.0, rev: 5, irq: 11, latency: 165, mmio:
> 0xfc000000
> cx88[0]/0: registered device video0 [v4l2]
> cx88[0]/0: registered device vbi0
> cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
> cx88[0]/2: cx2388x 8802 Driver Manager
> ACPI: PCI Interrupt 0000:01:09.2[A] -> Link [LNKC] -> GSI 11 (level,
> low) -> IRQ 11
> cx88[0]/2: found at 0000:01:09.2, rev: 5, irq: 11, latency: 64, mmio:
> 0xfd000000
> cx8802_probe() allocating 1 frontend(s)
> cx88/2: cx2388x dvb driver version 0.0.6 loaded
> cx88/2: registering cx8802 driver, type: dvb access: shared
> cx88[0]/2: subsystem: 8920:8888, board: TBS 8920 DVB-S/S2 [card=72]
> cx88[0]/2: cx2388x based DVB/ATSC card
> DVB: registering new adapter (cx88[0])
> DVB: registering adapter 0 frontend 0 (Conexant CX24116/CX24118)...
> cx24116_firmware_ondemand: Waiting for firmware upload
> (dvb-fe-cx24116.fw)...
> cx24116_firmware_ondemand: Waiting for firmware upload(2)...
> cx24116_load_firmware: FW version 1.22.82.0
> cx24116_firmware_ondemand: Firmware upload complete
> LNB Voltage SEC_VOLTAGE_13
> LNB Voltage SEC_VOLTAGE_18
>
> I also tested this patch:
> http://hg.kewl.org/v4l-dvb/raw-rev/8d6d8974b33d
>
> but without any change.
>
> Any hints whats going wrong here ?
>
P.S. I am using kernel 2.6.23.17
--
Helmut Auer, helmut@helmutauer.de
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [linux-dvb] tbs 8920 / cx24116 not working
2008-11-07 22:44 ` Helmut Auer
@ 2008-11-08 16:32 ` Helmut Auer
2008-11-08 17:57 ` Igor M. Liplianin
0 siblings, 1 reply; 6+ messages in thread
From: Helmut Auer @ 2008-11-08 16:32 UTC (permalink / raw)
To: linux-dvb
Hello Igor
Thanks for your patch from here:
http://www.linuxtv.org/pipermail/linux-dvb/2008-November/030207.html
I do not get the email for this answer :(
Now DVB-S works, but when I switch to a HDTV channel I get this messages:
> cx24108 debug: entering SetTunerFreq, freq=1612000
> cx24108 debug: select vco #7 (f=1612000)
> cx24108 debug: pump=1, n=49, a=26
> cx24108 debug: entering SetTunerFreq, freq=1613375
> cx24108 debug: select vco #7 (f=1613375)
> cx24108 debug: pump=1, n=49, a=27
> cx24108 debug: entering SetTunerFreq, freq=1610625
> cx24108 debug: select vco #7 (f=1610625)
> cx24108 debug: pump=1, n=49, a=24
> cx24108 debug: entering SetTunerFreq, freq=1614750
> cx24108 debug: select vco #7 (f=1614750)
> cx24108 debug: pump=1, n=49, a=29
> cx24108 debug: entering SetTunerFreq, freq=1609250
> cx24108 debug: select vco #7 (f=1609250)
> cx24108 debug: pump=1, n=49, a=23
> cx24108 debug: entering SetTunerFreq, freq=1616125
> cx24108 debug: select vco #7 (f=1616125)
> cx24108 debug: pump=1, n=49, a=30
> cx24108 debug: entering SetTunerFreq, freq=1607875
> cx24108 debug: select vco #7 (f=1607875)
> cx24108 debug: pump=1, n=49, a=22
> cx24108 debug: entering SetTunerFreq, freq=1617500
> cx24108 debug: select vco #7 (f=1617500)
> cx24108 debug: pump=1, n=49, a=31
> cx24108 debug: entering SetTunerFreq, freq=1606500
> cx24108 debug: select vco #7 (f=1606500)
> cx24108 debug: pump=1, n=49, a=20
> cx24108 debug: entering SetTunerFreq, freq=1618875
And nothing woll be received.
Tested with:
ANIXE HD;BetaDigital:11914:hC910M2O35S1:S19.2E:27500:1535:0;1539=deu:0:0:132:133:6:0
and
ARTE HD;ZDFvision:11362:hC23M2O35S1:S19.2E:22000:6210:6221=deu,6222=fra:6230:0:11120:1:1011:0
--
Helmut Auer, helmut@helmutauer.de
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [linux-dvb] tbs 8920 / cx24116 not working
2008-11-08 16:32 ` Helmut Auer
@ 2008-11-08 17:57 ` Igor M. Liplianin
0 siblings, 0 replies; 6+ messages in thread
From: Igor M. Liplianin @ 2008-11-08 17:57 UTC (permalink / raw)
To: linux-dvb
В сообщении от 8 November 2008 18:32:58 Helmut Auer написал(а):
> Hello Igor
>
> Thanks for your patch from here:
> http://www.linuxtv.org/pipermail/linux-dvb/2008-November/030207.html
>
> I do not get the email for this answer :(
Your mail delivery system marks my mails like spam :(
>
> Now DVB-S works, but when I switch to a HDTV channel I get this messages:
> > cx24108 debug: entering SetTunerFreq, freq=1612000
> > cx24108 debug: select vco #7 (f=1612000)
> > cx24108 debug: pump=1, n=49, a=26
> > cx24108 debug: entering SetTunerFreq, freq=1613375
> > cx24108 debug: select vco #7 (f=1613375)
> > cx24108 debug: pump=1, n=49, a=27
> > cx24108 debug: entering SetTunerFreq, freq=1610625
> > cx24108 debug: select vco #7 (f=1610625)
> > cx24108 debug: pump=1, n=49, a=24
> > cx24108 debug: entering SetTunerFreq, freq=1614750
> > cx24108 debug: select vco #7 (f=1614750)
> > cx24108 debug: pump=1, n=49, a=29
> > cx24108 debug: entering SetTunerFreq, freq=1609250
> > cx24108 debug: select vco #7 (f=1609250)
> > cx24108 debug: pump=1, n=49, a=23
> > cx24108 debug: entering SetTunerFreq, freq=1616125
> > cx24108 debug: select vco #7 (f=1616125)
> > cx24108 debug: pump=1, n=49, a=30
> > cx24108 debug: entering SetTunerFreq, freq=1607875
> > cx24108 debug: select vco #7 (f=1607875)
> > cx24108 debug: pump=1, n=49, a=22
> > cx24108 debug: entering SetTunerFreq, freq=1617500
> > cx24108 debug: select vco #7 (f=1617500)
> > cx24108 debug: pump=1, n=49, a=31
> > cx24108 debug: entering SetTunerFreq, freq=1606500
> > cx24108 debug: select vco #7 (f=1606500)
> > cx24108 debug: pump=1, n=49, a=20
> > cx24108 debug: entering SetTunerFreq, freq=1618875
>
> And nothing woll be received.
> Tested with:
>
> ANIXE
> HD;BetaDigital:11914:hC910M2O35S1:S19.2E:27500:1535:0;1539=deu:0:0:132:133:
>6:0 and
> ARTE
> HD;ZDFvision:11362:hC23M2O35S1:S19.2E:22000:6210:6221=deu,6222=fra:6230:0:1
>1120:1:1011:0
--
Igor M. Liplianin
Microsoft Windows Free Zone - Linux used for all Computing Tasks
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [linux-dvb] tbs 8920 / cx24116 not working
2008-11-07 22:43 [linux-dvb] tbs 8920 / cx24116 not working Helmut Auer
2008-11-07 22:44 ` Helmut Auer
@ 2008-11-07 22:48 ` Goga777
2008-11-08 0:17 ` Igor M. Liplianin
2 siblings, 0 replies; 6+ messages in thread
From: Goga777 @ 2008-11-07 22:48 UTC (permalink / raw)
To: linux-dvb
Приветствую, Helmut
> Hello List,
>
> I just tried to get my tbs 8920 running with current S2API and VDR and
> also with the multiproto drivers and a patch for this card.
> Both versions are failing, with this error:
>
> Nov 7 23:39:26 [kernel] LNB Voltage SEC_VOLTAGE_18
> Nov 7 23:39:26 [vdr] [23138] ERROR (dvbdevice.c,282): Die Operation
> wird nicht unterstützt
> Nov 7 23:39:35 [vdr] [23138] frontend 0 timed out while tuning to
> channel 3, tp 112187
> Nov 7 23:39:35 [vdr] [23138] ERROR (dvbdevice.c,282): Die Operation
> wird nicht unterstützt
> Nov 7 23:39:35 [kernel] LNB Voltage SEC_VOLTAGE_18
> Nov 7 23:39:44 [vdr] [23138] ERROR (dvbdevice.c,282): Die Operation
> wird nicht unterstützt
> Nov 7 23:39:44 [kernel] LNB Voltage SEC_VOLTAGE_18
>
> dmesg shows:
>
> LNB Voltage SEC_VOLTAGE_off
> ACPI: PCI interrupt for device 0000:01:09.0 disabled
> cx88/2: unregistering cx8802 driver, type: dvb access: shared
> cx88[0]/2: subsystem: 8920:8888, board: TBS 8920 DVB-S/S2 [card=71]
> ACPI: PCI interrupt for device 0000:01:09.2 disabled
> Linux video capture interface: v2.00
> cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
> ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [LNKC] -> GSI 11 (level,
> low) -> IRQ 11
> cx88[0]: subsystem: 8920:8888, board: TBS 8920 DVB-S/S2
> [card=72,autodetected], frontend(s): 1
> cx88[0]: TV tuner type 4, Radio tuner type -1
> cx88[0]/0: found at 0000:01:09.0, rev: 5, irq: 11, latency: 165, mmio:
> 0xfc000000
> cx88[0]/0: registered device video0 [v4l2]
> cx88[0]/0: registered device vbi0
> cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
> cx88[0]/2: cx2388x 8802 Driver Manager
> ACPI: PCI Interrupt 0000:01:09.2[A] -> Link [LNKC] -> GSI 11 (level,
> low) -> IRQ 11
> cx88[0]/2: found at 0000:01:09.2, rev: 5, irq: 11, latency: 64, mmio:
> 0xfd000000
> cx8802_probe() allocating 1 frontend(s)
> cx88/2: cx2388x dvb driver version 0.0.6 loaded
> cx88/2: registering cx8802 driver, type: dvb access: shared
> cx88[0]/2: subsystem: 8920:8888, board: TBS 8920 DVB-S/S2 [card=72]
> cx88[0]/2: cx2388x based DVB/ATSC card
> DVB: registering new adapter (cx88[0])
> DVB: registering adapter 0 frontend 0 (Conexant CX24116/CX24118)...
> cx24116_firmware_ondemand: Waiting for firmware upload
> (dvb-fe-cx24116.fw)...
> cx24116_firmware_ondemand: Waiting for firmware upload(2)...
> cx24116_load_firmware: FW version 1.22.82.0
> cx24116_firmware_ondemand: Firmware upload complete
> LNB Voltage SEC_VOLTAGE_13
> LNB Voltage SEC_VOLTAGE_18
>
> I also tested this patch:
> http://hg.kewl.org/v4l-dvb/raw-rev/8d6d8974b33d
>
> but without any change.
>
> Any hints whats going wrong here ?
http://mercurial.intuxication.org/hg/s2-liplianin/file/d423b7887ec8/linux/Documentation/video4linux/CARDLIST.cx88
69 68 -> Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [0070:6900,0070:6904,0070:6902]
70 69 -> Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [0070:6905,0070:6906]
71 70 -> TeVii S460 DVB-S/S2 [d460:9022]
72 71 -> Omicom SS4 DVB-S/S2 PCI [A044:2011]
73 72 -> TBS 8920 DVB-S/S2 [8920:8888]
74 73 -> TeVii S420 DVB-S [d420:9022]
75 74 -> Prolink Pixelview Global Extreme [1554:4976]
76 75 -> PROF 7300 DVB-S/S2 [B033:3033]
please try http://mercurial.intuxication.org/hg/s2-liplianin
Goga
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [linux-dvb] tbs 8920 / cx24116 not working
2008-11-07 22:43 [linux-dvb] tbs 8920 / cx24116 not working Helmut Auer
2008-11-07 22:44 ` Helmut Auer
2008-11-07 22:48 ` Goga777
@ 2008-11-08 0:17 ` Igor M. Liplianin
2 siblings, 0 replies; 6+ messages in thread
From: Igor M. Liplianin @ 2008-11-08 0:17 UTC (permalink / raw)
To: linux-dvb
On 8 ноября 2008, linux-dvb@linuxtv.org wrote:
> Hello List,
>
> I just tried to get my tbs 8920 running with current S2API and VDR and
> also with the multiproto drivers and a patch for this card.
> Both versions are failing, with this error:
>
> Nov 7 23:39:26 [kernel] LNB Voltage SEC_VOLTAGE_18
> Nov 7 23:39:26 [vdr] [23138] ERROR (dvbdevice.c,282): Die Operation
> wird nicht unterstЭtzt
> Nov 7 23:39:35 [vdr] [23138] frontend 0 timed out while tuning to
> channel 3, tp 112187
> Nov 7 23:39:35 [vdr] [23138] ERROR (dvbdevice.c,282): Die Operation
> wird nicht unterstЭtzt
> Nov 7 23:39:35 [kernel] LNB Voltage SEC_VOLTAGE_18
> Nov 7 23:39:44 [vdr] [23138] ERROR (dvbdevice.c,282): Die Operation
> wird nicht unterstЭtzt
> Nov 7 23:39:44 [kernel] LNB Voltage SEC_VOLTAGE_18
>
> dmesg shows:
>
> LNB Voltage SEC_VOLTAGE_off
> ACPI: PCI interrupt for device 0000:01:09.0 disabled
> cx88/2: unregistering cx8802 driver, type: dvb access: shared
> cx88[0]/2: subsystem: 8920:8888, board: TBS 8920 DVB-S/S2 [card=71]
> ACPI: PCI interrupt for device 0000:01:09.2 disabled
> Linux video capture interface: v2.00
> cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
> ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [LNKC] -> GSI 11 (level,
> low) -> IRQ 11
> cx88[0]: subsystem: 8920:8888, board: TBS 8920 DVB-S/S2
> [card=72,autodetected], frontend(s): 1
> cx88[0]: TV tuner type 4, Radio tuner type -1
> cx88[0]/0: found at 0000:01:09.0, rev: 5, irq: 11, latency: 165, mmio:
> 0xfc000000
> cx88[0]/0: registered device video0 [v4l2]
> cx88[0]/0: registered device vbi0
> cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
> cx88[0]/2: cx2388x 8802 Driver Manager
> ACPI: PCI Interrupt 0000:01:09.2[A] -> Link [LNKC] -> GSI 11 (level,
> low) -> IRQ 11
> cx88[0]/2: found at 0000:01:09.2, rev: 5, irq: 11, latency: 64, mmio:
> 0xfd000000
> cx8802_probe() allocating 1 frontend(s)
> cx88/2: cx2388x dvb driver version 0.0.6 loaded
> cx88/2: registering cx8802 driver, type: dvb access: shared
> cx88[0]/2: subsystem: 8920:8888, board: TBS 8920 DVB-S/S2 [card=72]
> cx88[0]/2: cx2388x based DVB/ATSC card
> DVB: registering new adapter (cx88[0])
> DVB: registering adapter 0 frontend 0 (Conexant CX24116/CX24118)...
> cx24116_firmware_ondemand: Waiting for firmware upload
> (dvb-fe-cx24116.fw)...
> cx24116_firmware_ondemand: Waiting for firmware upload(2)...
> cx24116_load_firmware: FW version 1.22.82.0
> cx24116_firmware_ondemand: Firmware upload complete
> LNB Voltage SEC_VOLTAGE_13
> LNB Voltage SEC_VOLTAGE_18
>
> I also tested this patch:
> http://hg.kewl.org/v4l-dvb/raw-rev/8d6d8974b33d
>
> but without any change.
>
> Any hints whats going wrong here ?
Quick workaround: cx24116.c:
static int cx24116_set_voltage(struct dvb_frontend *fe,
fe_sec_voltage_t voltage)
{
/* The isl6421 module will override this function in the fops. */
dprintk("%s() This should never appear if the isl6421 module "
"is loaded correctly\n", __func__);
- return -EOPNOTSUPP;
+ return 0;
}
Or other way: cx88-dvb:
case CX88_BOARD_TBS_8920:
case CX88_BOARD_PROF_7300:
fe0->dvb.frontend = dvb_attach(cx24116_attach,
&hauppauge_hvr4000_config,
&core->i2c_adap);
if (fe0->dvb.frontend != NULL) {
- core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage;
+ //core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage;
fe0->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage;
}
break;
--
Igor M. Liplianin
Microsoft Windows Free Zone - Linux used for all Computing Tasks
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 6+ messages in thread