Non-functional Altec Lansing FX5051 USB-soundcard + speakers

Non-functional Altec Lansing FX5051 USB-soundcard + speakers

[Jeremy Nickurak]

About 14 months ago I purchased a nice new ~$300 set of altec lansing 
5.1 speakers, which include a USB-sound card. Since that time they've 
largely gone unused, or at least not properly used. I brought this up on 
the mailing list at the time, but didn't get much response, so I thought 
I'd poke my head up again and see if anybody has any insight.

First off, the set works correctly, out-of-the-box under windows, 
without having to install any special drivers or software at all.

Under linux, plugging them in instantly freezes the usb sound card up, 
and locks it at 100% volume, in such a way that there's absolutely no 
way to turn the volume down: not from alsamixer, and not from the 
speaker's hardware control dial. Sound does play, but again, it's 
unbearably loud, to the point where I don't do it for risk of damaging 
my speakers and/or ears.

I filed the bug away on the bug-tracker, but haven't heard much out of 
it since. The bug contains my lsusb -v information, the "contents" 
output from amixer for this card, and some preliminary results showing 
some ability to tweak the volume with amixer, but not reliably.

Any suggestions are welcome. I'm happy to experiment with this set more 
if it can help, run experimental code, etc. Heck, I'd go at the thing 
with a screwdriver for chipset information if I know what I was looking 
for or thought it could help.

Re: Non-functional Altec Lansing FX5051 USB-soundcard + speakers

[Jelle de Jong]

Jeremy Nickurak wrote:
> About 14 months ago I purchased a nice new ~$300 set of altec lansing 
> 5.1 speakers, which include a USB-sound card. Since that time they've 
> largely gone unused, or at least not properly used. I brought this up on 
> the mailing list at the time, but didn't get much response, so I thought 
> I'd poke my head up again and see if anybody has any insight.
> 
> First off, the set works correctly, out-of-the-box under windows, 
> without having to install any special drivers or software at all.
> 
> Under linux, plugging them in instantly freezes the usb sound card up, 
> and locks it at 100% volume, in such a way that there's absolutely no 
> way to turn the volume down: not from alsamixer, and not from the 
> speaker's hardware control dial. Sound does play, but again, it's 
> unbearably loud, to the point where I don't do it for risk of damaging 
> my speakers and/or ears.
> 
> I filed the bug away on the bug-tracker, but haven't heard much out of 
> it since. The bug contains my lsusb -v information, the "contents" 
> output from amixer for this card, and some preliminary results showing 
> some ability to tweak the volume with amixer, but not reliably.
> 
> Any suggestions are welcome. I'm happy to experiment with this set more 
> if it can help, run experimental code, etc. Heck, I'd go at the thing 
> with a screwdriver for chipset information if I know what I was looking 
> for or thought it could help.

I also have some volume issues with some of my usb audio devices, it
might be related tot the dB0 scaling issues that where discussed on the
list. There may be a good usable workaround for you, that will be a
software volume control.

change all the zeros to your hardware id and set the correct user

echo 'pcm.softvol {
    type softvol
    slave.pcm dmix:0
    control.name Master
    control.card 0
}

pcm.!default {
    type plug
    slave.pcm softvol
}

ctl.!default {
    type hw
    card 0
}' | tee /home/user0/.asoundrc
chmod 600 /home/user0/.asoundrc
chown user0:user0 /home/user0/.asoundrc

Best regards,

Jelle