[U-Boot] [PATCH 1/5] powerpc: 83xx: support for the SMSC LAN8700 PHY

[U-Boot] [PATCH 1/5] powerpc: 83xx: support for the SMSC LAN8700 PHY

[Heiko Schocher]

Signed-off-by: Heiko Schocher <hs@denx.de>
---
 drivers/qe/uec_phy.c |   59 ++++++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 59 insertions(+), 0 deletions(-)

diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c
index 2243d3b..c03eb12 100644
--- a/drivers/qe/uec_phy.c
+++ b/drivers/qe/uec_phy.c
@@ -533,6 +533,55 @@ static void dm9161_close (struct uec_mii_info *mii_info)
 {
 }

+static int smsc_config_aneg (struct uec_mii_info *mii_info)
+{
+	return 0;
+}
+
+static int smsc_read_status (struct uec_mii_info *mii_info)
+{
+	u16 status;
+	int err;
+
+	/* Update the link, but return if there
+	 * was an error */
+	err = genmii_update_link (mii_info);
+	if (err)
+		return err;
+
+	/* If the link is up, read the speed and duplex */
+	/* If we aren't autonegotiating, assume speeds
+	 * are as set */
+	if (mii_info->autoneg && mii_info->link) {
+		int	val;
+
+		status = phy_read (mii_info, 0x1f);
+		val = (status & 0x1c) >> 2;
+		
+		switch (val) {
+			case 1:
+				mii_info->duplex = DUPLEX_HALF;
+				mii_info->speed = SPEED_10;
+				break;
+			case 5:
+				mii_info->duplex = DUPLEX_FULL;
+				mii_info->speed = SPEED_10;
+				break;
+			case 2:
+				mii_info->duplex = DUPLEX_HALF;
+				mii_info->speed = SPEED_100;
+				break;
+			case 6:
+				mii_info->duplex = DUPLEX_FULL;
+				mii_info->speed = SPEED_100;
+				break;
+		}
+		mii_info->pause = 0;
+	}
+
+	return 0;
+}
+
 static struct phy_info phy_info_dm9161 = {
 	.phy_id = 0x0181b880,
 	.phy_id_mask = 0x0ffffff0,
@@ -577,6 +626,15 @@ static struct phy_info phy_info_bcm5481 = {
 	.init = bcm_init,
 };

+static struct phy_info phy_info_smsclan8700 = {
+	.phy_id = 0x0007c0c0,
+	.phy_id_mask = 0xfffffff0,
+	.name = "SMSC LAN",
+	.features = MII_BASIC_FEATURES,
+	.config_aneg = smsc_config_aneg,
+	.read_status = smsc_read_status,
+};
+
 static struct phy_info phy_info_genmii = {
 	.phy_id = 0x00000000,
 	.phy_id_mask = 0x00000000,
@@ -591,6 +649,7 @@ static struct phy_info *phy_info[] = {
 	&phy_info_dm9161a,
 	&phy_info_marvell,
 	&phy_info_bcm5481,
+	&phy_info_smsclan8700,
 	&phy_info_genmii,
 	NULL
 };
-- 
1.5.6.1

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany