[ath9k-devel] It Works!

[Brian <bnc@astronomicalresearchaustralia.org>]

Luis,

> So we had over 40 patches pending which John just merged today. You
> can do a git pull or wait for compat-wireless to get updated.
Took your suggestion and did a git-pull.

Did a recompile after carefully checking menuconfig again.
The only major thing I have done is to remove any reference to IPV6.

Rebooted and everything came up and WORKED!:)
Not sure what you changed but it has done the trick.

I have been up for about 30mins with no issues.
2.6.28-rc5-wl-W #11 SMP

With this result
Mode		Rate (Mbps)	Signal (%)
802.11n (2.4GHz)	78	100


So while I am happy the 11n is now working the rate does not seem to be
as expected.

ISSUES so far

1) When I do a ping there is about a 10-15sec delay before the responses
start coming back.

2) I cannot start WPA_GUI or WPA_CLI it comes back with
Selected interface 'wlan0.pid'
Trying to connect to '/var/run/wpa_supplicant/wlan0.pid'
Failed to open control connection to wpa_supplicant.
PING failed - trying to reconnect

The pid is correct.


So many thanks to the atheros team for getting ath9k going.

Brian