From: Tejun Heo <tj@kernel.org>
To: Jeff Garzik <jeff@garzik.org>,
IDE/ATA development list <linux-ide@vger.kernel.org>
Subject: [PATCH #upstraem-fixes] ata_piix: detect and clear spurious IRQs
Date: Fri, 21 Nov 2008 13:13:06 +0900 [thread overview]
Message-ID: <49263552.8090602@kernel.org> (raw)
The DMA_IRQ bit in the bmdma status register is always set when IDEIRQ
is asserted allowing spurious IRQ detection. Detect spurious IRQs and
clear them. This protects ata_piix against nobody-cared which gets
reported not so rarely.
Signed-off-by: Tejun Heo <tj@kernel.org>
---
drivers/ata/ata_piix.c | 54 ++++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 53 insertions(+), 1 deletion(-)
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 8e37be1..b438edc 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -922,6 +922,58 @@ static int piix_sidpr_scr_read(struct ata_link *link,
return 0;
}
+static irqreturn_t piix_interrupt(int irq, void *dev_instance)
+{
+ struct ata_host *host = dev_instance;
+ unsigned int i;
+ unsigned int handled = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap = host->ports[i];
+ struct ata_queued_cmd *qc;
+ u8 host_stat;
+
+ if (ata_port_is_dummy(ap))
+ continue;
+
+ qc = ata_qc_from_tag(ap, ap->link.active_tag);
+ if (qc && !(qc->tf.flags & ATA_TFLAG_POLLING)) {
+ handled |= ata_sff_host_intr(ap, qc);
+ continue;
+ }
+
+ /*
+ * Control reaches here if HSM is not expecting IRQ.
+ * If the controller is actually asserting IRQ line,
+ * this will lead to nobody cared. Fortuantely,
+ * DMA_INTR of PIIX is set whenever IDEIRQ is set so
+ * it can be used to detect spurious IRQs. As the
+ * driver is not expecting IRQ at all, clearing IRQ
+ * here won't lead to loss of IRQ event.
+ */
+ if (unlikely(!ap->ioaddr.bmdma_addr))
+ continue;
+
+ host_stat = ap->ops->bmdma_status(ap);
+ if (!(host_stat & ATA_DMA_INTR))
+ continue;
+
+ if (printk_ratelimit())
+ ata_port_printk(ap, KERN_INFO,
+ "clearing spurious IRQ\n");
+ ap->ops->sff_check_status(ap);
+ ap->ops->sff_irq_clear(ap);
+ handled |= 1;
+ }
+
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ return IRQ_RETVAL(handled);
+}
+
static int piix_sidpr_scr_write(struct ata_link *link,
unsigned int reg, u32 val)
{
@@ -1470,7 +1522,7 @@ static int __devinit piix_init_one(struct pci_dev *pdev,
}
pci_set_master(pdev);
- return ata_pci_sff_activate_host(host, ata_sff_interrupt, &piix_sht);
+ return ata_pci_sff_activate_host(host, piix_interrupt, &piix_sht);
}
static int __init piix_init(void)
next reply other threads:[~2008-11-21 4:13 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-21 4:13 Tejun Heo [this message]
2008-11-21 10:25 ` [PATCH #upstraem-fixes] ata_piix: detect and clear spurious IRQs Alan Cox
2008-11-21 13:07 ` Tejun Heo
2008-11-25 17:07 ` Jeff Garzik
2008-11-26 2:52 ` Tejun Heo
2008-11-26 10:47 ` Alan Cox
2008-11-26 12:26 ` Sergei Shtylyov
2008-11-26 12:28 ` Sergei Shtylyov
2008-11-26 12:37 ` Sergei Shtylyov
2008-11-26 17:34 ` Jeff Garzik
2008-11-26 17:45 ` Tejun Heo
2008-11-26 18:40 ` Alan Cox
2008-11-26 18:57 ` Tejun Heo
2008-11-28 2:31 ` Tejun Heo
2008-12-04 16:33 ` Mark Lord
2008-12-04 16:35 ` Alan Cox
2008-11-21 16:59 ` Sergei Shtylyov
2008-11-21 17:05 ` Tejun Heo
2008-11-25 17:08 ` Jeff Garzik
2008-11-25 17:15 ` Alan Cox
2008-11-26 2:45 ` Tejun Heo
2008-11-26 10:33 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49263552.8090602@kernel.org \
--to=tj@kernel.org \
--cc=jeff@garzik.org \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.