From: Jeremy Fitzhardinge <jeremy@goop.org>
To: Ian Campbell <Ian.Campbell@citrix.com>
Cc: linux-kernel@vger.kernel.org, Ingo Molnar <mingo@elte.hu>
Subject: Re: [PATCH] xen: pin correct PGD on suspend
Date: Fri, 21 Nov 2008 08:32:34 -0800 [thread overview]
Message-ID: <4926E2A2.2060602@goop.org> (raw)
In-Reply-To: <1227262893-27335-1-git-send-email-Ian.Campbell@citrix.com>
Ian Campbell wrote:
> commit eefb47f6a1e855653d275cb90592a3587ea93a09 ("xen: use
> spin_lock_nest_lock when pinning a pagetable") changed xen_pgd_walk to
> walk over mm->pgd rather than taking pgd as an argument.
>
> This breaks xen_mm_(un)pin_all() because it makes init_mm.pgd readonly
> instead of the pgd we are interested in and therefore the pin subsequently
> fails.
>
Oh, yeah, that was a bit dense. This is needed for .28.
Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Thanks,
J
> (XEN) mm.c:2280:d15 Bad type (saw 00000000e8000001 != exp 0000000060000000) for mfn bc464 (pfn 21ca7)
> (XEN) mm.c:2665:d15 Error while pinning mfn bc464
>
> [ 14.586913] 1 multicall(s) failed: cpu 0
> [ 14.586926] Pid: 14, comm: kstop/0 Not tainted 2.6.28-rc5-x86_32p-xenU-00172-gee2f6cc #200
> [ 14.586940] Call Trace:
> [ 14.586955] [<c030c17a>] ? printk+0x18/0x1e
> [ 14.586972] [<c0103df3>] xen_mc_flush+0x163/0x1d0
> [ 14.586986] [<c0104bc1>] __xen_pgd_pin+0xa1/0x110
> [ 14.587000] [<c015a330>] ? stop_cpu+0x0/0xf0
> [ 14.587015] [<c0104d7b>] xen_mm_pin_all+0x4b/0x70
> [ 14.587029] [<c022bcb9>] xen_suspend+0x39/0xe0
> [ 14.587042] [<c015a330>] ? stop_cpu+0x0/0xf0
> [ 14.587054] [<c015a3cd>] stop_cpu+0x9d/0xf0
> [ 14.587067] [<c01417cd>] run_workqueue+0x8d/0x150
> [ 14.587080] [<c030e4b3>] ? _spin_unlock_irqrestore+0x23/0x40
> [ 14.587094] [<c014558a>] ? prepare_to_wait+0x3a/0x70
> [ 14.587107] [<c0141918>] worker_thread+0x88/0xf0
> [ 14.587120] [<c01453c0>] ? autoremove_wake_function+0x0/0x50
> [ 14.587133] [<c0141890>] ? worker_thread+0x0/0xf0
> [ 14.587146] [<c014509c>] kthread+0x3c/0x70
> [ 14.587157] [<c0145060>] ? kthread+0x0/0x70
> [ 14.587170] [<c0109d1b>] kernel_thread_helper+0x7/0x10
> [ 14.587181] call 1/3: op=14 arg=[c0415000] result=0
> [ 14.587192] call 2/3: op=14 arg=[e1ca2000] result=0
> [ 14.587204] call 3/3: op=26 arg=[c1808860] result=-22
>
> Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
> Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
> Cc: Ingo Molnar <mingo@elte.hu>
> ---
> arch/x86/xen/mmu.c | 21 ++++++++++++++-------
> 1 files changed, 14 insertions(+), 7 deletions(-)
>
> diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
> index 6889360..636ef4c 100644
> --- a/arch/x86/xen/mmu.c
> +++ b/arch/x86/xen/mmu.c
> @@ -661,12 +661,11 @@ void xen_set_pgd(pgd_t *ptr, pgd_t val)
> * For 64-bit, we must skip the Xen hole in the middle of the address
> * space, just after the big x86-64 virtual hole.
> */
> -static int xen_pgd_walk(struct mm_struct *mm,
> - int (*func)(struct mm_struct *mm, struct page *,
> - enum pt_level),
> - unsigned long limit)
> +static int __xen_pgd_walk(struct mm_struct *mm, pgd_t *pgd,
> + int (*func)(struct mm_struct *mm, struct page *,
> + enum pt_level),
> + unsigned long limit)
> {
> - pgd_t *pgd = mm->pgd;
> int flush = 0;
> unsigned hole_low, hole_high;
> unsigned pgdidx_limit, pudidx_limit, pmdidx_limit;
> @@ -753,6 +752,14 @@ out:
> return flush;
> }
>
> +static int xen_pgd_walk(struct mm_struct *mm,
> + int (*func)(struct mm_struct *mm, struct page *,
> + enum pt_level),
> + unsigned long limit)
> +{
> + return __xen_pgd_walk(mm, mm->pgd, func, limit);
> +}
> +
> /* If we're using split pte locks, then take the page's lock and
> return a pointer to it. Otherwise return NULL. */
> static spinlock_t *xen_pte_lock(struct page *page, struct mm_struct *mm)
> @@ -854,7 +861,7 @@ static void __xen_pgd_pin(struct mm_struct *mm, pgd_t *pgd)
>
> xen_mc_batch();
>
> - if (xen_pgd_walk(mm, xen_pin_page, USER_LIMIT)) {
> + if (__xen_pgd_walk(mm, pgd, xen_pin_page, USER_LIMIT)) {
> /* re-enable interrupts for flushing */
> xen_mc_issue(0);
>
> @@ -998,7 +1005,7 @@ static void __xen_pgd_unpin(struct mm_struct *mm, pgd_t *pgd)
> PT_PMD);
> #endif
>
> - xen_pgd_walk(mm, xen_unpin_page, USER_LIMIT);
> + __xen_pgd_walk(mm, pgd, xen_unpin_page, USER_LIMIT);
>
> xen_mc_issue(0);
> }
>
next prev parent reply other threads:[~2008-11-21 16:32 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-21 10:21 [PATCH] xen: pin correct PGD on suspend Ian Campbell
2008-11-21 16:32 ` Jeremy Fitzhardinge [this message]
2008-11-23 12:32 ` Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4926E2A2.2060602@goop.org \
--to=jeremy@goop.org \
--cc=Ian.Campbell@citrix.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.