* Re: [PATCH] phy: phy-rockchip-inno-usb2: Handle failed extcon allocation better
@ 2024-08-15 16:12 ` Heiko Stübner
0 siblings, 0 replies; 9+ messages in thread
From: Heiko Stübner @ 2024-08-15 16:12 UTC (permalink / raw)
To: linux-rockchip, linux-phy, Dragan Simic
Cc: vkoul, kishon, linux-arm-kernel, linux-kernel
Am Dienstag, 13. August 2024, 20:38:17 CEST schrieb Dragan Simic:
> Return the actual error code upon failure to allocate extcon device, instead
> of hardcoding -ENOMEM. While there, produce an appropriate error message.
>
> Signed-off-by: Dragan Simic <dsimic@manjaro.org>
> ---
> drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> index 4f71373ae6e1..d33418a1e7a8 100644
> --- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> @@ -434,8 +434,10 @@ static int rockchip_usb2phy_extcon_register(struct rockchip_usb2phy *rphy)
> edev = devm_extcon_dev_allocate(rphy->dev,
> rockchip_usb2phy_extcon_cable);
>
> - if (IS_ERR(edev))
> - return -ENOMEM;
> + if (IS_ERR(edev)) {
> + dev_err(rphy->dev, "failed to allocate extcon device\n");
> + return PTR_ERR(edev);
> + }
maybe even use dev_err_probe?
rockchip_usb2phy_extcon_register() gets called from the probe function,
so even using it is also sematically correct ;-) .
Heiko
>
> ret = devm_extcon_dev_register(rphy->dev, edev);
> if (ret) {
>
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [PATCH] phy: phy-rockchip-inno-usb2: Handle failed extcon allocation better
@ 2024-08-15 16:12 ` Heiko Stübner
0 siblings, 0 replies; 9+ messages in thread
From: Heiko Stübner @ 2024-08-15 16:12 UTC (permalink / raw)
To: linux-rockchip, linux-phy, Dragan Simic
Cc: vkoul, kishon, linux-arm-kernel, linux-kernel
Am Dienstag, 13. August 2024, 20:38:17 CEST schrieb Dragan Simic:
> Return the actual error code upon failure to allocate extcon device, instead
> of hardcoding -ENOMEM. While there, produce an appropriate error message.
>
> Signed-off-by: Dragan Simic <dsimic@manjaro.org>
> ---
> drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> index 4f71373ae6e1..d33418a1e7a8 100644
> --- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> @@ -434,8 +434,10 @@ static int rockchip_usb2phy_extcon_register(struct rockchip_usb2phy *rphy)
> edev = devm_extcon_dev_allocate(rphy->dev,
> rockchip_usb2phy_extcon_cable);
>
> - if (IS_ERR(edev))
> - return -ENOMEM;
> + if (IS_ERR(edev)) {
> + dev_err(rphy->dev, "failed to allocate extcon device\n");
> + return PTR_ERR(edev);
> + }
maybe even use dev_err_probe?
rockchip_usb2phy_extcon_register() gets called from the probe function,
so even using it is also sematically correct ;-) .
Heiko
>
> ret = devm_extcon_dev_register(rphy->dev, edev);
> if (ret) {
>
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [PATCH] phy: phy-rockchip-inno-usb2: Handle failed extcon allocation better
2024-08-15 16:12 ` Heiko Stübner
(?)
@ 2024-08-17 6:52 ` Dragan Simic
-1 siblings, 0 replies; 9+ messages in thread
From: Dragan Simic @ 2024-08-17 6:52 UTC (permalink / raw)
To: Heiko Stübner
Cc: linux-rockchip, linux-phy, vkoul, kishon, linux-arm-kernel,
linux-kernel
Hello Heiko,
On 2024-08-15 18:12, Heiko Stübner wrote:
> Am Dienstag, 13. August 2024, 20:38:17 CEST schrieb Dragan Simic:
>> Return the actual error code upon failure to allocate extcon device,
>> instead
>> of hardcoding -ENOMEM. While there, produce an appropriate error
>> message.
>>
>> Signed-off-by: Dragan Simic <dsimic@manjaro.org>
>> ---
>> drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 6 ++++--
>> 1 file changed, 4 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
>> b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
>> index 4f71373ae6e1..d33418a1e7a8 100644
>> --- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
>> +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
>> @@ -434,8 +434,10 @@ static int
>> rockchip_usb2phy_extcon_register(struct rockchip_usb2phy *rphy)
>> edev = devm_extcon_dev_allocate(rphy->dev,
>> rockchip_usb2phy_extcon_cable);
>>
>> - if (IS_ERR(edev))
>> - return -ENOMEM;
>> + if (IS_ERR(edev)) {
>> + dev_err(rphy->dev, "failed to allocate extcon device\n");
>> + return PTR_ERR(edev);
>> + }
>
> maybe even use dev_err_probe?
>
> rockchip_usb2phy_extcon_register() gets called from the probe function,
> so even using it is also sematically correct ;-) .
Good suggestion, thanks! I'll use dev_err_probe() in the v2, albeit it
also calls for turning this into a small patch series that additionally
replaces dev_err() with dev_err_probe() in the rockchip_usb2phy_probe()
function, for consistency. :)
>> ret = devm_extcon_dev_register(rphy->dev, edev);
>> if (ret) {
>>
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [PATCH] phy: phy-rockchip-inno-usb2: Handle failed extcon allocation better
@ 2024-08-17 6:52 ` Dragan Simic
0 siblings, 0 replies; 9+ messages in thread
From: Dragan Simic @ 2024-08-17 6:52 UTC (permalink / raw)
To: Heiko Stübner
Cc: linux-rockchip, linux-phy, vkoul, kishon, linux-arm-kernel,
linux-kernel
Hello Heiko,
On 2024-08-15 18:12, Heiko Stübner wrote:
> Am Dienstag, 13. August 2024, 20:38:17 CEST schrieb Dragan Simic:
>> Return the actual error code upon failure to allocate extcon device,
>> instead
>> of hardcoding -ENOMEM. While there, produce an appropriate error
>> message.
>>
>> Signed-off-by: Dragan Simic <dsimic@manjaro.org>
>> ---
>> drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 6 ++++--
>> 1 file changed, 4 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
>> b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
>> index 4f71373ae6e1..d33418a1e7a8 100644
>> --- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
>> +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
>> @@ -434,8 +434,10 @@ static int
>> rockchip_usb2phy_extcon_register(struct rockchip_usb2phy *rphy)
>> edev = devm_extcon_dev_allocate(rphy->dev,
>> rockchip_usb2phy_extcon_cable);
>>
>> - if (IS_ERR(edev))
>> - return -ENOMEM;
>> + if (IS_ERR(edev)) {
>> + dev_err(rphy->dev, "failed to allocate extcon device\n");
>> + return PTR_ERR(edev);
>> + }
>
> maybe even use dev_err_probe?
>
> rockchip_usb2phy_extcon_register() gets called from the probe function,
> so even using it is also sematically correct ;-) .
Good suggestion, thanks! I'll use dev_err_probe() in the v2, albeit it
also calls for turning this into a small patch series that additionally
replaces dev_err() with dev_err_probe() in the rockchip_usb2phy_probe()
function, for consistency. :)
>> ret = devm_extcon_dev_register(rphy->dev, edev);
>> if (ret) {
>>
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [PATCH] phy: phy-rockchip-inno-usb2: Handle failed extcon allocation better
@ 2024-08-17 6:52 ` Dragan Simic
0 siblings, 0 replies; 9+ messages in thread
From: Dragan Simic @ 2024-08-17 6:52 UTC (permalink / raw)
To: Heiko Stübner
Cc: linux-rockchip, linux-phy, vkoul, kishon, linux-arm-kernel,
linux-kernel
Hello Heiko,
On 2024-08-15 18:12, Heiko Stübner wrote:
> Am Dienstag, 13. August 2024, 20:38:17 CEST schrieb Dragan Simic:
>> Return the actual error code upon failure to allocate extcon device,
>> instead
>> of hardcoding -ENOMEM. While there, produce an appropriate error
>> message.
>>
>> Signed-off-by: Dragan Simic <dsimic@manjaro.org>
>> ---
>> drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 6 ++++--
>> 1 file changed, 4 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
>> b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
>> index 4f71373ae6e1..d33418a1e7a8 100644
>> --- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
>> +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
>> @@ -434,8 +434,10 @@ static int
>> rockchip_usb2phy_extcon_register(struct rockchip_usb2phy *rphy)
>> edev = devm_extcon_dev_allocate(rphy->dev,
>> rockchip_usb2phy_extcon_cable);
>>
>> - if (IS_ERR(edev))
>> - return -ENOMEM;
>> + if (IS_ERR(edev)) {
>> + dev_err(rphy->dev, "failed to allocate extcon device\n");
>> + return PTR_ERR(edev);
>> + }
>
> maybe even use dev_err_probe?
>
> rockchip_usb2phy_extcon_register() gets called from the probe function,
> so even using it is also sematically correct ;-) .
Good suggestion, thanks! I'll use dev_err_probe() in the v2, albeit it
also calls for turning this into a small patch series that additionally
replaces dev_err() with dev_err_probe() in the rockchip_usb2phy_probe()
function, for consistency. :)
>> ret = devm_extcon_dev_register(rphy->dev, edev);
>> if (ret) {
>>
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply [flat|nested] 9+ messages in thread