* RE： RE: when timer go back in dom0 save and restore ormigrate, PV domain hung
@ 2008-11-27 10:21 James Song
2008-11-27 10:51 ` Keir Fraser
0 siblings, 1 reply; 3+ messages in thread
From: James Song @ 2008-11-27 10:21 UTC (permalink / raw)
To: keir.fraser, kevin.tian, xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 12806 bytes --]
Hi,
Ok, now two machine A and B. the system-time of A is ahead of B. So wc_sec of A is also bigger than B. When PV dom in A migrate to B, we haven't upate that PV dom's wc_sec to equal with B. Ok, now we see pv dom's kernel:
xen_sched_clock() in arch/86/xen/time.c andxen_clocksource_read() arch/x86/kernel/time_32-xen.c
you will find if state_entry_time of its's vcpu, because the state_entry_time is initalized in machine A. this time it more big than "now" of machine B. So no schedule, no system-update in Guest os.
I don't whether did I describe it clearly.
>>> "Tian, Kevin" <kevin.tian@intel.com> 08/11/27 PM 9:18 >>>there's a clock_was_set called for each settimeofday. In latest kernel, clock_was_set will adjust CLOCK_REALTIME queue accordingly, while in 2.6.18 it's defined as a nop. That says, current domU would be unable to handle wallclock change, but newer kernel with pvops could. ---- yes, it works for FV, but for a modified PV domain, mybe not.
for the issue reported in original thread, I agree that James should dig into the hang and explain the exact reason first.
Thanks
Kevin
From: Keir Fraser [mailto:keir.fraser@eu.citrix.com]
Sent: Wednesday, November 26, 2008 10:58 PM
To: Tian, Kevin; 'James Song'; xen-devel@lists.xensource.com
Subject: Re: [Xen-devel] when timer go back in dom0 save and restore or migrate, PV domain hung
So what happens if someone changes wallclock using 'date'? That's basically kind of what will appear to happen when s/r occurs.
-- Keir
On 26/11/08 14:32, "Tian, Kevin" <kevin.tian@intel.com> wrote:
hrtimer supports two timer bases: CLOCK_MONOTONIC and CLOCK_REALTIME. wall_to_monotonic is only added in former case, and for latter instead TOD is used directly per my reading. I did a quick search, and it looks that futex and ntp are using CLOCK_REALTIME. Also there's one vsyscall gate which can pass CLOCK_REALTIME from caller too.
Thanks,
Kevin
mailto:keir.fraser@eu.citrix.com]
Sent: Wednesday, November 26, 2008 10:26 PM
To: Tian, Kevin; 'James Song'; xen-devel@lists.xensource.com
Subject: Re: [Xen-devel] when timer go back in dom0 save and restore or migrate, PV domain hung
hrtimers add wall_to_monotonic to xtime to get a timesource that doesn't (or shouldn't!) warp.
-- Keir
On 26/11/08 14:20, "Tian, Kevin" <kevin.tian@intel.com> wrote:
how about hrtimers? one mode is CLOCK_REALTIME, which uses getnstimeofday as expiration. Once system time is changed either in local or new machine, that expiration can't be adjusted. but i'm not sure whether it still makes sense to try hrtimers in a guest.
Thanks
Kevin
mailto:keir.fraser@eu.citrix.com]
Sent: Wednesday, November 26, 2008 10:11 PM
To: Tian, Kevin; 'James Song'; xen-devel@lists.xensource.com
Subject: Re: [Xen-devel] when timer go back in dom0 save and restore or migrate, PV domain hung
The problem hasn't been fully explained, but I can say that PV guests expect system time to jump across s/r and deal with that. For example, Linux doesn't use Xen system time internally, but uses its progress to periodically update jiffies, which does not warp across s/r.
We have had problems corrupting wc_sec/wc_nsec in xc_domain_restore.c, but that was fixed some time ago.
-- Keir
On 26/11/08 14:00, "Tian, Kevin" <kevin.tian@intel.com> wrote:
This is not a s/r or lm specific issue. For example, system time can be changed even when pv guest is running. Your patch only hacks restore point once, and wc_sec can still be changed later when system time is changed on-the-fly again.
IIRC, pv guest can catch up wall clock change in timer interrupt, and time_resume will sync internal processed system time with new system time after restored. But I'm not sure whether it's enough. Actually the more interesting is the uptime difference. For example, timer with expiration calculated on previous system time may wait nearly infinite if uptime among two boxes vary a lot. But I think such issue should have been considered already, e.g. some user tool assistance. I think Keir can comment better here.
BTW, do you happen to know what exactly dom0 hangs on? In some busy loop to catch up time, or long delay to some critical timer expiration?
Thanks,
Kevin
mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of James Song
Sent: Tuesday, November 25, 2008 4:02 PM
To: xen-devel@lists.xensource.com
Subject: [Xen-devel] when timer go back in dom0 save and restore or migrate, PV domain hung
Hi,
I find PV domin hung, When we take those steps
1, save PV domain
2, change system time of PV domain back
3, restore a PV domain
or
1, migrate a PV domain from Machine A to Machine B
2, the system time of Machine B is slower than Machine A.
the problem is wc_sec will be change when system-time chanaged in dom0 or restore in a slower-system-time machine, but when restoring, xen don't restore the wc_sec of share_info from xenstore and use native one. So guest os will hang.
this patch will work for this issue.
Thanks
-- Song Wei
diff -r a5ed0dbc829f tools/libxc/xc_domain_restore.c
--- a/tools/libxc/xc_domain_restore.c Tue Nov 18 14:34:14 2008 +0800
+++ b/tools/libxc/xc_domain_restore.c Fri Nov 21 17:34:15 2008 +0800
@@ -328,6 +328,16 @@
/* For info only */
nr_pfns = 0;
+ //jsong@novell.com, james song
+ memset(&domctl, 0, sizeof(domctl));
+ domctl.domain = dom;
+ domctl.cmd = XEN_DOMCTL_restoredomain;
+ frc = do_domctl(xc_handle, &domctl);
+ if ( frc != 0 )
+ {
+ ERROR("Unable to set flag of restore.");
+ goto out;
+ }
if ( read_exact(io_fd, &p2m_size, sizeof(unsigned long)) )
{
@@ -1120,6 +1130,8 @@
/* restore saved vcpu_info and arch specific info */
MEMCPY_FIELD(new_shared_info, old_shared_info, vcpu_info);
+ MEMCPY_FIELD(new_shared_info, old_shared_info, wc_nsec);
+ MEMCPY_FIELD(new_shared_info, old_shared_info, wc_sec);
MEMCPY_FIELD(new_shared_info, old_shared_info, arch);
/* clear any pending events and the selector */
diff -r a5ed0dbc829f xen/arch/x86/time.c
--- a/xen/arch/x86/time.c Tue Nov 18 14:34:14 2008 +0800
+++ b/xen/arch/x86/time.c Fri Nov 21 17:34:15 2008 +0800
@@ -689,7 +689,6 @@
wmb();
(*version)++;
}
-
void update_vcpu_system_time(struct vcpu *v)
{
struct cpu_time *t;
@@ -703,7 +702,6 @@
if ( u->tsc_timestamp == t->local_tsc_stamp )
return;
-
version_update_begin(&u->version);
u->tsc_timestamp = t->local_tsc_stamp;
@@ -713,14 +711,19 @@
version_update_end(&u->version);
}
-
void update_domain_wallclock_time(struct domain *d)
{
spin_lock(&wc_lock);
+ if(d->after_restore )
+ {
+ d->after_restore = 0;
+ goto out; //jsong@novell.com
+ }
version_update_begin(&shared_info(d, wc_version));
shared_info(d, wc_sec) = wc_sec + d->time_offset_seconds;
shared_info(d, wc_nsec) = wc_nsec;
version_update_end(&shared_info(d, wc_version));
+out:
spin_unlock(&wc_lock);
}
@@ -751,7 +754,6 @@
u64 x;
u32 y, _wc_sec, _wc_nsec;
struct domain *d;
-
x = (secs * 1000000000ULL) + (u64)nsecs - system_time_base;
y = do_div(x, 1000000000);
@@ -1050,7 +1052,6 @@
struct tm wallclock_time(void)
{
uint64_t seconds;
-
if ( !wc_sec )
return (struct tm) { 0 };
diff -r a5ed0dbc829f xen/common/domctl.c
--- a/xen/common/domctl.c Tue Nov 18 14:34:14 2008 +0800
+++ b/xen/common/domctl.c Fri Nov 21 17:34:15 2008 +0800
@@ -24,7 +24,6 @@
#include <asm/current.h>
#include <public/domctl.h>
#include <xsm/xsm.h>
-
extern long arch_do_domctl(
struct xen_domctl *op, XEN_GUEST_HANDLE(xen_domctl_t) u_domctl);
@@ -315,6 +314,16 @@
ret = 0;
}
break;
+ case XEN_DOMCTL_restoredomain:
+ {
+ struct domain *d;
+ if ( (d = rcu_lock_domain_by_id(op->domain)) == NULL )
+ break;
+
+ d->after_restore = 1;
+ rcu_unlock_domain(d);
+ break;
+ }
case XEN_DOMCTL_createdomain:
{
diff -r a5ed0dbc829f xen/include/public/domctl.h
--- a/xen/include/public/domctl.h Tue Nov 18 14:34:14 2008 +0800
+++ b/xen/include/public/domctl.h Fri Nov 21 17:34:15 2008 +0800
@@ -61,6 +61,7 @@
#define XEN_DOMCTL_destroydomain 2
#define XEN_DOMCTL_pausedomain 3
#define XEN_DOMCTL_unpausedomain 4
+#define XEN_DOMCTL_restoredomain 51
#define XEN_DOMCTL_resumedomain 27
#define XEN_DOMCTL_getdomaininfo 5
diff -r a5ed0dbc829f xen/include/xen/sched.h
--- a/xen/include/xen/sched.h Tue Nov 18 14:34:14 2008 +0800
+++ b/xen/include/xen/sched.h Fri Nov 21 17:34:15 2008 +0800
@@ -231,6 +231,7 @@
* cause a deadlock. Acquirers don't spin waiting; they preempt.
*/
spinlock_t hypercall_deadlock_mutex;
+ int after_restore; //jsong@novell.com
};
struct domain_setup_info
---------------------------------------------------------------------------------------------
Thanks
--Song wei
</kevin.tian@intel.com>
[-- Attachment #1.2: Type: text/html, Size: 22993 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: RE： RE: when timer go back in dom0 save and restore ormigrate, PV domain hung
2008-11-27 10:21 RE： RE: when timer go back in dom0 save and restore ormigrate, PV domain hung James Song
@ 2008-11-27 10:51 ` Keir Fraser
2008-11-27 17:51 ` RE： RE: [Xen-devel] " Jeremy Fitzhardinge
0 siblings, 1 reply; 3+ messages in thread
From: Keir Fraser @ 2008-11-27 10:51 UTC (permalink / raw)
To: James Song, kevin.tian, xen-devel; +Cc: Jeremy Fitzhardinge
[-- Attachment #1.1: Type: text/plain, Size: 11207 bytes --]
Might this be a pv_ops bug in newer Linux kernels? I don¹t really get what
you¹re describing though.
-- Keir
On 27/11/08 10:21, "James Song" <jsong@novell.com> wrote:
> Hi,
> Ok, now two machine A and B. the system-time of A is ahead of B. So
> wc_sec of A is also bigger than B. When PV dom in A migrate to B, we haven't
> upate that PV dom's wc_sec to equal with B. Ok, now we see pv dom's kernel:
> xen_sched_clock() in arch/86/xen/time.c andxen_clocksource_read()
> arch/x86/kernel/time_32-xen.c
> you will find if state_entry_time of its's vcpu, because the
> state_entry_time is initalized in machine A. this time it more big than "now"
> of machine B. So no schedule, no system-update in Guest os.
> I don't whether did I describe it clearly.
>
>>>> >>> "Tian, Kevin" 08/11/27 PM 9:18 >>>
> there's a clock_was_set called for each settimeofday. In latest kernel,
> clock_was_set will adjust CLOCK_REALTIME queue accordingly, while in 2.6.18
> it's defined as a nop. That says, current domU would be unable to handle
> wallclock change, but newer kernel with pvops could. ---- yes, it works for
> FV, but for a modified PV domain, mybe not.
>
> for the issue reported in original thread, I agree that James should dig into
> the hang and explain the exact reason first.
>
> Thanks
> Kevin
>
>>
>>
>>
>> From: Keir Fraser [mailto:keir.fraser@eu.citrix.com]
>> Sent: Wednesday, November 26, 2008 10:58 PM
>> To: Tian, Kevin; 'James Song'; xen-devel@lists.xensource.com
>> Subject: Re: [Xen-devel] when timer go back in dom0 save and restore or
>> migrate, PV domain hung
>>
>>
>> So what happens if someone changes wallclock using 'date'? That's basically
>> kind of what will appear to happen when s/r occurs.
>>
>> -- Keir
>>
>> On 26/11/08 14:32, "Tian, Kevin" <kevin.tian@intel.com> wrote:
>>
>>
>>> hrtimer supports two timer bases: CLOCK_MONOTONIC and CLOCK_REALTIME.
>>> wall_to_monotonic is only added in former case, and for latter instead TOD
>>> is used directly per my reading. I did a quick search, and it looks that
>>> futex and ntp are using CLOCK_REALTIME. Also there's one vsyscall gate
>>> which can pass CLOCK_REALTIME from caller too.
>>>
>>> Thanks,
>>> Kevin
>>>
>>>
>>>>
>>>>
>>>>
>>>>
>>>> From: Keir Fraser [mailto:keir.fraser@eu.citrix.com]
>>>> <mailto:keir.fraser@eu.citrix.com%5D>
>>>> Sent: Wednesday, November 26, 2008 10:26 PM
>>>> To: Tian, Kevin; 'James Song'; xen-devel@lists.xensource.com
>>>> Subject: Re: [Xen-devel] when timer go back in dom0 save and restore or
>>>> migrate, PV domain hung
>>>>
>>>>
>>>> hrtimers add wall_to_monotonic to xtime to get a timesource that doesn't
>>>> (or shouldn't!) warp.
>>>>
>>>> -- Keir
>>>>
>>>> On 26/11/08 14:20, "Tian, Kevin" <kevin.tian@intel.com> wrote:
>>>>
>>>>
>>>>
>>>>> how about hrtimers? one mode is CLOCK_REALTIME, which uses
>>>>> getnstimeofday as expiration. Once system time is changed either in local
>>>>> or new machine, that expiration can't be adjusted. but i'm not sure
>>>>> whether it still makes sense to try hrtimers in a guest.
>>>>>
>>>>> Thanks
>>>>> Kevin
>>>>>
>>>>>
>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> From: Keir Fraser [mailto:keir.fraser@eu.citrix.com]
>>>>>> <mailto:keir.fraser@eu.citrix.com%5D>
>>>>>> Sent: Wednesday, November 26, 2008 10:11 PM
>>>>>> To: Tian, Kevin; 'James Song'; xen-devel@lists.xensource.com
>>>>>> Subject: Re: [Xen-devel] when timer go back in dom0 save and restore
>>>>>> or migrate, PV domain hung
>>>>>>
>>>>>>
>>>>>> The problem hasn't been fully explained, but I can say that PV guests
>>>>>> expect system time to jump across s/r and deal with that. For example,
>>>>>> Linux doesn't use Xen system time internally, but uses its progress to
>>>>>> periodically update jiffies, which does not warp across s/r.
>>>>>>
>>>>>> We have had problems corrupting wc_sec/wc_nsec in xc_domain_restore.c,
>>>>>> but that was fixed some time ago.
>>>>>>
>>>>>> -- Keir
>>>>>>
>>>>>> On 26/11/08 14:00, "Tian, Kevin" <kevin.tian@intel.com> wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>> This is not a s/r or lm specific issue. For example, system time can
>>>>>>> be changed even when pv guest is running. Your patch only hacks
>>>>>>> restore point once, and wc_sec can still be changed later when system
>>>>>>> time is changed on-the-fly again.
>>>>>>>
>>>>>>> IIRC, pv guest can catch up wall clock change in timer interrupt, and
>>>>>>> time_resume will sync internal processed system time with new system
>>>>>>> time after restored. But I'm not sure whether it's enough. Actually
>>>>>>> the more interesting is the uptime difference. For example, timer
>>>>>>> with expiration calculated on previous system time may wait nearly
>>>>>>> infinite if uptime among two boxes vary a lot. But I think such issue
>>>>>>> should have been considered already, e.g. some user tool assistance.
>>>>>>> I think Keir can comment better here.
>>>>>>>
>>>>>>> BTW, do you happen to know what exactly dom0 hangs on? In some busy
>>>>>>> loop to catch up time, or long delay to some critical timer
>>>>>>> expiration?
>>>>>>>
>>>>>>> Thanks,
>>>>>>> Kevin
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
From: xen-devel-bounces@lists.xensource.com
[mailto:xen-devel-bounces@lists.xensource.com]
<mailto:xen-devel-bounces@lists.xensource.com%5D> On Behalf Of James
Song
Sent: Tuesday, November 25, 2008 4:02 PM
To: xen-devel@lists.xensource.com
Subject: [Xen-devel] when timer go back in dom0 save and restore or
migrate, PV domain hung
Hi,
I find PV domin hung, When we take those steps
1, save PV domain
2, change system time of PV domain back
3, restore a PV domain
or
1, migrate a PV domain from Machine A to Machine B
2, the system time of Machine B is slower than Machine A.
the problem is wc_sec will be change when system-time chanaged in
dom0 or restore in a slower-system-time machine, but when restoring, xen
don't restore the wc_sec of share_info from xenstore and use native
one. So guest os will hang.
this patch will work for this issue.
Thanks
-- Song Wei
diff -r a5ed0dbc829f tools/libxc/xc_domain_restore.c
--- a/tools/libxc/xc_domain_restore.c Tue Nov 18 14:34:14 2008
+0800
+++ b/tools/libxc/xc_domain_restore.c Fri Nov 21 17:34:15 2008
+0800
@@ -328,6 +328,16 @@
/* For info only */
nr_pfns = 0;
+ //jsong@novell.com, james song
+ memset(&domctl, 0, sizeof(domctl));
+ domctl.domain = dom;
+ domctl.cmd = XEN_DOMCTL_restoredomain;
+ frc = do_domctl(xc_handle, &domctl);
+ if ( frc != 0 )
+ {
+ ERROR("Unable to set flag of restore.");
+ goto out;
+ }
if ( read_exact(io_fd, &p2m_size, sizeof(unsigned long)) )
{
@@ -1120,6 +1130,8 @@
/* restore saved vcpu_info and arch specific info */
MEMCPY_FIELD(new_shared_info, old_shared_info, vcpu_info);
+ MEMCPY_FIELD(new_shared_info, old_shared_info, wc_nsec);
+ MEMCPY_FIELD(new_shared_info, old_shared_info, wc_sec);
MEMCPY_FIELD(new_shared_info, old_shared_info, arch);
/* clear any pending events and the selector */
diff -r a5ed0dbc829f xen/arch/x86/time.c
--- a/xen/arch/x86/time.c Tue Nov 18 14:34:14 2008 +0800
+++ b/xen/arch/x86/time.c Fri Nov 21 17:34:15 2008 +0800
@@ -689,7 +689,6 @@
wmb();
(*version)++;
}
-
void update_vcpu_system_time(struct vcpu *v)
{
struct cpu_time *t;
@@ -703,7 +702,6 @@
if ( u->tsc_timestamp == t->local_tsc_stamp )
return;
-
version_update_begin(&u->version);
u->tsc_timestamp = t->local_tsc_stamp;
@@ -713,14 +711,19 @@
version_update_end(&u->version);
}
-
void update_domain_wallclock_time(struct domain *d)
{
spin_lock(&wc_lock);
+ if(d->after_restore )
+ {
+ d->after_restore = 0;
+ goto out; //jsong@novell.com
+ }
version_update_begin(&shared_info(d, wc_version));
shared_info(d, wc_sec) = wc_sec + d->time_offset_seconds;
shared_info(d, wc_nsec) = wc_nsec;
version_update_end(&shared_info(d, wc_version));
+out:
spin_unlock(&wc_lock);
}
@@ -751,7 +754,6 @@
u64 x;
u32 y, _wc_sec, _wc_nsec;
struct domain *d;
-
x = (secs * 1000000000ULL) + (u64)nsecs - system_time_base;
y = do_div(x, 1000000000);
@@ -1050,7 +1052,6 @@
struct tm wallclock_time(void)
{
uint64_t seconds;
-
if ( !wc_sec )
return (struct tm) { 0 };
diff -r a5ed0dbc829f xen/common/domctl.c
--- a/xen/common/domctl.c Tue Nov 18 14:34:14 2008 +0800
+++ b/xen/common/domctl.c Fri Nov 21 17:34:15 2008 +0800
@@ -24,7 +24,6 @@
#include <asm/current.h>
#include <public/domctl.h>
#include <xsm/xsm.h>
-
extern long arch_do_domctl(
struct xen_domctl *op, XEN_GUEST_HANDLE(xen_domctl_t) u_domctl);
@@ -315,6 +314,16 @@
ret = 0;
}
break;
+ case XEN_DOMCTL_restoredomain:
+ {
+ struct domain *d;
+ if ( (d = rcu_lock_domain_by_id(op->domain)) == NULL )
+ break;
+
+ d->after_restore = 1;
+ rcu_unlock_domain(d);
+ break;
+ }
case XEN_DOMCTL_createdomain:
{
diff -r a5ed0dbc829f xen/include/public/domctl.h
--- a/xen/include/public/domctl.h Tue Nov 18 14:34:14 2008 +0800
+++ b/xen/include/public/domctl.h Fri Nov 21 17:34:15 2008 +0800
@@ -61,6 +61,7 @@
#define XEN_DOMCTL_destroydomain 2
#define XEN_DOMCTL_pausedomain 3
#define XEN_DOMCTL_unpausedomain 4
+#define XEN_DOMCTL_restoredomain 51
#define XEN_DOMCTL_resumedomain 27
#define XEN_DOMCTL_getdomaininfo 5
diff -r a5ed0dbc829f xen/include/xen/sched.h
--- a/xen/include/xen/sched.h Tue Nov 18 14:34:14 2008 +0800
+++ b/xen/include/xen/sched.h Fri Nov 21 17:34:15 2008 +0800
@@ -231,6 +231,7 @@
* cause a deadlock. Acquirers don't spin waiting; they
preempt.
*/
spinlock_t hypercall_deadlock_mutex;
+ int after_restore; //jsong@novell.com
};
struct domain_setup_info
----------------------------------------------------------------------------
-----------------
Thanks
--Song wei
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
[-- Attachment #1.2: Type: text/html, Size: 21993 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: RE： RE: [Xen-devel] when timer go back in dom0 save and restore ormigrate, PV domain hung
2008-11-27 10:51 ` Keir Fraser
@ 2008-11-27 17:51 ` Jeremy Fitzhardinge
0 siblings, 0 replies; 3+ messages in thread
From: Jeremy Fitzhardinge @ 2008-11-27 17:51 UTC (permalink / raw)
To: Keir Fraser; +Cc: kevin.tian, xen-devel, James Song
Keir Fraser wrote:
> Might this be a pv_ops bug in newer Linux kernels? I don’t really get
> what you’re describing though.
>
> -- Keir
>
> On 27/11/08 10:21, "James Song" <jsong@novell.com> wrote:
>
> Hi,
> Ok, now two machine A and B. the system-time of A is ahead of
> B. So wc_sec of A is also bigger than B. When PV dom in A migrate
> to B, we haven't upate that PV dom's wc_sec to equal with B. Ok,
> now we see pv dom's kernel:
> xen_sched_clock() in arch/86/xen/time.c
> andxen_clocksource_read() arch/x86/kernel/time_32-xen.c
> you will find if state_entry_time of its's vcpu, because the
> state_entry_time is initalized in machine A. this time it more big
> than "now" of machine B. So no schedule, no system-update in Guest os.
> I don't whether did I describe it clearly.
>
At one point I had some code in there to work out the delta between the
system timestamps before and after save/restore, but I think I ended up
deciding it wasn't necessary because the clocksource and clockevents get
reinitialized from scratch by the core clock code on resume.
I don't understand your mention of wc_sec, since the wallclock only used
very occasionally, and never for scheduling.
If this is in relation to the Novell forward-port kernel, perhaps you
should look at what the mainline pvops xen code in this area.
J
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2008-11-27 17:51 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-11-27 10:21 RE： RE: when timer go back in dom0 save and restore ormigrate, PV domain hung James Song
2008-11-27 10:51 ` Keir Fraser
2008-11-27 17:51 ` RE： RE: [Xen-devel] " Jeremy Fitzhardinge
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.